2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/13 (Fri.) -- Room A

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/13(Fri.) -- Room A / B-2 / F / G / H / I / J / K

Friday Morning (July 13) -- Room A: 8:30-9:20
Presenters Name Affiliation Country Paper Title pdf
Chairperson: Masaki Hojo
Plenary Lecture 7 Goichi Ben Nihon University, College of Industrial Technology Japan WHAT WE HAVE AQCCOMPLISED IN NEDO PROJECT FOR AUTOMOTIVE STRUCTURES Pl-09
Session Title: Processing of Carbon Nanotube Composites
Friday Morning (July 13) -- Room A: 9:20-14:20
Chairperson(s): Wei Hong Zhong
Ka Keung Wong The Hong Kong Polytechnic University Hong Kong Effects of UV Exposure on an Oxidized Carbon Nanotube Polymer Composite FrAM1-01
San Qiang Shi The Hong Kong Polytechnic University Hong Kong
Kin Tak Lau The Hong Kong Polytechnic University Hong Kong
Alejandro Urena Universidad Rey Juan Carlos Spain EFFECT OF DISPERSION, FUNCTIONALIZATION AND ORIENTATION OF CARBON NANOFIBERS ON THE PROPERTIES OF NANOREINFORCED EPOXY RESINS FrAM1-04
Silvia G Prolongo Universidad Rey Juan Carlos Spain
Maria Buron Universidad Rey Juan Carlos Spain
Ruben Chaos Universidad Rey Juan Carlos Spain
Monica Campo Universidad Rey Juan Carlos Spain
Nao Takase Tokyo university of science Japan Alignment control of carbon nanofibers using liquid crystal FrAM1-03
Takuya Aoki Japan Aerospace Exploration Agency Japan
Hiroshi Hatta Japan Aerospace Exploration Agency Japan
Hiroshi Fukuda Tokyo university of science Japan
Benoit Simard National Research Council of Canada Canada An integrated approach for making high performance SWNT-based materials FrAM1-02
Gervais Soucy Universite de Sherbrooke Canada
Keun Su Kim Japan Canada
Chris Kingston National Research Council of Canada Canada
Jingwen Guan National Research Council of Canada Canada
Session Title: Multifunctional Nanocomposites, II
Chairperson(s): Alejandro Urena
Heejae Yang Drexel University USA MULTIFUNCTIONAL NANOPARTICLES REINFORCED NANOFIBERS BY ELECTROSPINNING FrAM1-05
Hui Li Drexel University USA
Wei-Heng Shih Drexel University USA
Yoshihiro Yamashita The University of Shiga Prefecture Japan
Frank Ko Drexel University US
Yoshihiro Yamashita The University of Shiga Prefecture Japan Establishment of nano fiber preparation technique for nanocomposites FrAM1-06
Akira Tanaka The University of Shiga Prefecture Japan
Hajime Miyake North Eastern Industrial Research Center of Shiga Prefecture Japan
Akio Higashiyama North Eastern Industrial Research Center of Shiga Prefecture Japan
Hidefumi Kato Kato tech Co. Ltd. Japan
Ying-Ling Liu Chung Yuan Christian University Taiwan SILICA NANO-PARTICLE/POLYELECTROLYTE NANOCOMOPSITE MEMBRANES FOR DIRECT METHANOL FUEL CELLS FrAM1-07
Yu-Huei Su National Taiwan University Taiwan
Juin-Yih Lai Chung Yuan Christian University Taiwan
Cheol Kim Kyungpook National University Korea IMPROVED FABRICATION AND TESTS OF A CNT/PANI COMPOSITE FILM ACTUATOR FrAM1-08
Shuai Zhang Kyungpook National University Korea
Plenary Lecture 8 Anthony M Waas University of Michigan, Ann Arbor, Michigan USA Progressive Failure in Composite Laminated Panels: Experiments, Analysis and Modeling Pl-10
top

Friday Afternoon (July 13) -- Room A: 14:20-17:20
Session Title: Multifunctional Nanocomposites, II
Presenters Name Affiliation Country Paper Title pdf
Chairperson(s): Yoshihiro Yamashita
Wei Hong Zhong North Dakota State University USA CONDUCTING PROPERTIES OF POLYPROPYLENE/ CARBON NANOFIBER COMPOSITES FrAA1-01
Gang Sui North Dakota State University USA
M. A. Fuqua North Dakota State University USA
C. A. Ulven North Dakota State University USA
Wei Jen Chen National Tsing Hua University Taiwan Preparation sheet and Characterization of Carbon Nano Tube /Phenolic resin Nanocomposite for Fuel Cell Bipolar Plate FrAA1-02
Ming Chuen Yip National Tsing Hua University Taiwan
Yi Luen Li National Tsing Hua University Taiwan
Session Title: Composites Application to Wind Turbine
Chairperson(s): Adriaan Beukers
Peter Berring Risø National Laboratory Denmark Torsional performance of wind turbine blades - part I: Experimental investigation FrAA2-01
Kim Branner Risø National Laboratory Denmark
Christian Berggreen Technical University of Denmark Denmark
Henrik W. Knudsen Technical University of Denmark Denmark
Kim Branner Risø National Laboratory Denmark Torsional performance of wind turbine blades - part II: Numerical verification FrAA2-02
Peter Berring Risø National Laboratory Denmark
Christian Berggreen Technical University of Denmark Denmark
Henrik W. Knudsen Technical University of Denmark Denmark
Lars Chr. T. Overgaard Aalborg University Denmark Interdisplinary Damage and Stability Analysis of a Wind Turbine Blade FrAA2-03
Erik Lund Aalborg University Denmark
Keisuke Hayabusa Ebara Research Co., LTD. Japan EVALUATION OF MECHANICAL PROPERTIES AND FORMABILITY OF GFRP FOR WIND TURBINE BLADE FrAA2-04
Dai Kudo EBARA Corporation Japan
Toshihiro Ohtani Ebara Research Co., LTD. Japan
Bosko P. Rasuo University of Belgrade Serbia and Montenegro DESIGN, FABRICATION AND VERIFICATION TESTING OF THE WIND TURBINE ROTOR BLADES FROM COMPOSITE MATERIALS FrAA2-05
Aleksandar Dj. Veg University of Belgrade Serbia and Montenegro
Anton Hulskamp Delft University of Technology Netherlands Model of a Wind Tunnel Scale Model of a Wind Turbine Blade for Unsteady Aerodynamic Load Control Experiments FrAA2-06
Adriaan Beukers Delft University of Technology Netherlands
Harald Bersee Delft University of Technology Netherlands
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.