2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/11 (Wed.) -- Poster Session (B-1)

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/11(Wed.) -- Room A / B-2 / F / G / H / I / J / K / Poster Session (B-1)

Wednesday Afternoon (July 11) -- Room B-1: 14:40-15:40
Poster Session
Presenters Name Affiliation Country Paper Title pdf
Mechanical Analysis and Modeling
Satoshi Kobayashi Tokyo Metropolitan University Japan EXPERIMENTAL AND ANALYTICAL CHARACTERIZATION OF SILICONCABIDE FIBER-REINFORCED PLASTICS Po-01
Shinji Ogihara Tokyo University of Science Japan
Chang Jun Jie Dalian Maritime University China Evaluation of intrefacial behavior if composite materials on ultrasonic wave propagation Po-02
Qing Qing NI Shinshu Univresity Japan
Pengcheng Cheng Bourgogne University France Effect of local stresses on fatigue life of patched composite panels Po-03
Xiao Jing Gong Bourgogne University France
Jerome Rousseau Bourgogne University France
Shahram Aivazzadeh Bourgogne University France
Shutian Liu Dalian University of Technology China TEMPERATURE-DEPENDENT VISCOELASTIC PROPERTIES OF UNIDIRECTIONAL COMPOSITE MATERIALS Po-04
Fengzhi Wang Dalian University of Technology China
Zbigniew Pedzich AGH - University of Science and Technology Poland THE MICROSTRUCTURE AND WEIBULL STATISTIC OF ALUMINA-WC PARTICULATE COMPOSITES Po-05
Chang Liang Zheng Dalian Maritime University China MECHANICAL PROPERTYIES OF MAGNESIUM ALLOY SHEET REINFORCED BY UNIDIRECTIONAL CARBON FIBER Po-06
Gongzhi Zhu Dalian Maritime University China
Jae Youl Lee HANBAT National University Korea SIMULATION OF LOW VELOCITY IMPACT OF SANDWICH PANELS APPLIED TO KOREAN LOW FLOOR BUS USING LS-DYNA Po-07
Kwang Bok Shin HANBAT National University Korea
Bong Jo Ryu HANBAT National University Korea
Jae Sun Jeon HANBAT National University Korea
Sang Jin Lee HANKUK Fiber Glass Co., Ltd. Korea
Andrew Byun Yonsei University Korea PROGRESSIVE DAMAGE OF RANDOMLY ORIENTED SHORT FIBER REINFORCED COMPOSITES Po-08
Sung-ho Byun Yonsei University Korea
Heoung-Jae Chun Yonsei University Korea
Jai-joon Jeong Yonsei University Korea
J. H. Byun Korea Institute of Machinery and Materials Korea
Aircraft Structures
Wu Hao Beijing University of Aeronautics and Astronautics China Multiple Frequencies Optimization of Composite Wing Flutter Model Po-09
Yan Ying Beijing University of Aeronautics and Astronautics China
Fatigue
Simone Giancane University of Lecce Italy A STUDY ON FATIGUE DAMAGE OF LONG FIBER EPOXY COMPOSITE LAMINATES Po-10
Francesco W Panella University of Lecce Italy
Vito Dattoma University of Lecce Italy
Green and Biodegradable Composites
Takeru Kagawa Kyushu University Japan EFFECT OF DRAWING ON THE FRACTURE BEHAVIOR OF HA/PLLA BIOCOMPOSITE MATERIAL Po-11
Mitsugu Todo Kyushu University Japan
Yasuharu Takenoshita Kyushu University Japan
Akira Myoui Osaka University Japan
Inaki Mondragon University of the Basque Country Spain CELLULOSE MICROFIBRILS BIONANOCOMPOSITES. MECHANICAL AND RHEOLOGICAL PROPERTIES Po-12
Aitor Arbelaiz University of the Basque Country Spain
Piedad Ganan University Pontif Bolivariana Colombia
Korode la Caba University of the Basque Country Spain
Alona Retegi University of the Basque Country Spain
Thomas Wittek Shonan Institute of Techology Japan PROCESSING AND MECHANICAL PROPERTIES OF BIODEGRADABLE STARCH-BASED RESIN REINFORCED WITH NATURAL MINERAL FIBRES Po-13
Toshio Tanimoto Shonan Institute of Technology Japan
Miren Nekane Ichazo Universidad Simón Bolívar Venezuela CURING AND PHYSICAL PROPERTIES OF NATURAL RUBBER/CASSAVA STARCH BLENDS Po-14
Jeny Pena Universidad Central de Venezuela Venezuela
Carmen Albano Instituto Venezolano de Investigaciones Cientificas Venezuela
Marianella Hernandez Universidad Simón Bolívar Venezuela
Jeanette Gonzalez Universidad Simón Bolívar Venezuela
Nanocomposites
Zhidong Han Harbin University of Science and Technology China Thermal Stability and Combustion Behaviors of LLDPE/silica Nanocomposites Po-15
Changjun Diao Harbin University of Science and Technology China
Limin Dong Harbin University of Science and Technology China
Xianyou Zhang Harbin University of Science and Technology China
Metal and Ceramic Matrix Composites
Chung - Gil Kang Pusan National University Korea Fabrication and characterization of aluminum based nano-micro hybrid metal matrix composites Po-16
J.S.Suresh Babu National Institute of Technology India
K.Prabhakaran Nair National Institute of Technology India
Makoto Kobashi Nagoya University Japan Influence of precursor preparation on cell structure of porous Ti composite Po-17
Naoyuki Kanetake Nagoya University Japan
Shenq-Yih Luo Huafan University Taiwan FABRICATION FOR MICRO PATTERNS OF NICKEL MATRIX DIAMOND COMPOSITES USING THE COMPOSITE ELECTROFORMING AND UV-LITHOGRAPHY Po-18
Tsung-Han Yu Huafan University Taiwan
Guo-We Hsiao Huafan University Taiwan
Burak Dikici Ataturk Universtiy Turkey THE EFFECT OF T8 TREATMENT ON CORROSION BEHAVIOR OF Al-SiCp MMCs Po-19
Cagri Tekmen Dokuz Eylul University Turkey
Mehmet Gavgali Ataturk Universtiy Turkey
Yoshiki Tsunekawa Toyota Technological Institute Japan
Yoshihiro Kobayashi Nagoya University Japan Fabrication of nitride ceramics composite by reactive infiltration Po-20
Takao Oda Nagoya University Japan
Makoto Kobashi Nagoya University Japan
Naoyuki Kanetake Nagoya University Japan
Wenbo Han Harbin Institute of Technology China THE EFFECT OF ALN AS SINTERING AIDS ON MICROSTRUCTURE AND PROPERTIES OF ZRB2 BASED COMPOSITE Po-21
Jiecai Han Harbin Institute of Technology China
Xinghong Zhang Harbin Institute of Technology China
Songhe Meng Harbin Institute of Technology China
Wen-Chou Tsai Kun-Shan University Taiwan SYNTHESIS OF 0.95MgTiO3-0.05CaTiO3 CERAMICS BY REACTION-SINTERING Po-22
Yi-Cheng Liou Kun-Shan University Taiwan
Song-Ling Yang Kun-Shan University Taiwan
Multifunctional Composites and Phisical Properties
Wei Hua Xie Harbin Institute of Technology China AN IMPROVED DIAGNOSTIC METHOD FOR DETECTION OF BOLT LOOSENING IN THERMAL PROTECTION PANELS Po-23
Boming Zhang Harbin Institute of Technology China
Shanyi Du Harbin Institute of Technology China
Jens Chr. Rauhe Aalborg University Denmark Electromechanical testing of carbon fibers Po-24
Lars Rosgaard Jensen Aalborg University Denmark
Ryszard Pyrz Aalborg University Denmark
Victor N. Gulbin R & D Institute of Construction Technology Russia TESTING OF THE RADIATION-PROTECTIVE COMPOSITE MATERIAL Po-25
Mikhail L. Lifshits R & D Institute of Construction Technology Russia
Victor N. Murashev Moscow Institute of Steel and Alloys Russia
Gennady I. Koltsov Moscow Institute of Steel and Alloys Russia
Takeshi Saito Institute for Advanced Studies Japan
Shuang Liu Harbin Institute of Technology China INVESTIGATION ON THERMAL MANAGEMENT FOR METALLIC FOAM SANDWICH MULTIFUNCTIONAL STRUCTURE TECHNOLOGY Po-26
Boming Zhang Harbin Institute of Technology China
Shanyi Du Harbin Institute of Technology China
Xin L. Lan Harbin Institute of Technology China Investigation of the Mechanical Behaviors for Fiber Reinforced Shape Memory Polymer Composite Po-27
Hai Bao Lv Harbin Institute of Technology China
Jin Song Leng Harbin Institute of Technology China
Shan Yi Du Harbin Institute of Technology China
Interface
Gad Marom The Hebrew University of Jerusalem Israel PROPAGATION OF 'POPCORN' FAILURE IN COMPOSITE PLATES BY MODE I DELAMINATION UNDER THE COMBINED EFFECT OF NON-UNIFORM HEATING AND ABSORBED MOISTURE Po-28
Esther Drukker Israel Aircraft Industries Ltd. Israel
Anthony K. Green Israel Aircraft Industries Ltd. Israel
Hannah Harel The Hebrew University of Jerusalem Israel
Estelle Kalfon The Hebrew University of Jerusalem Israel
Joints and Junction
Yi Xiao Japan Aerospace Exploration Agency Japan SMART APPROACH TO DETERMINE DAMAGE GROWTH IN MECHANICALLY FASTENED JOINTS Po-29
Yoshiaki Kakuta Japan Aerospace Exploration Agency Japan
Takashi Ishikawa Japan Aerospace Exploration Agency Japan
Luke P. Djukic The University of New South Wales Australia Creep in bonded composite joints Po-30
Donald W. Kelly The University of New South Wales Australia
Roger R. Li The University of New South Wales Australia
Gangadhara Prusty The University of New South Wales Australia
Andrew G. Beehag The Cooperative Research Centre for Advanced Composite Structures Australia
Bhavesh A. Patel Nirma University India TESTING OF GFRP COMPOSITES WRAPPED OVER EXTERIOR BEAM-COLUMN JUNCTION Po-31
Urmil V. Dave Nirma University India
Junqing Zhao Harbin Institude of Tecnology China THE RESEARCH ON COMPATIBILITY OF INTERFACE DEFORMATION BETWEEN ALUMINUM ALLOY AND COMPOSITE MATERIAL Po-32
Xiaodong He Harbin Institude of Tecnology China
Rongguo Wang Harbin Institude of Tecnology China
Wenbo Liu Harbin Institude of Tecnology China
Milan Ruzicka Czech Technical University in Prague Czech Republic INTEGRATED HIGH PERFORMANCE JOINT IN COMPOSITE VESSELS Po-33
Ondrej Uher CompoTech PLUS Ltd. Czech Republic
Karel Blahous Czech Technical University in Prague Czech Republic
Viktor Kulisek Czech Technical University in Prague Czech Republic
Milan Dvorak Czech Technical University in Prague Czech Republic
Hybrid Composites and Polymer Blending
Chu K Ong The University of Auckland New Zealand Preparation and Characterization of Polyethylene/Polypyrrole-coated Calcium Silicate Composites Po-34
Sudip Ray The University of Auckland New Zealand
Peter Plimmer The University of Auckland New Zealand
Neil R Edmonds The University of Auckland New Zealand
Allan J Easteal The University of Auckland New Zealand
Marianella Hernández Universidad Simón Bolívar Venezuela FRACTURE BEHAVIOR OF POLYPROPYLENE/ELASTOMER BLENDS Po-35
Orlando Santana Universidad Politecnica de Cataluna Spain
Miren Nekane Ichazo Universidad Simón Bolívar Venezuela
Jeanette Gonzalez Universidad Simón Bolívar Venezuela
Carmen Albano Instituto Venezolano de Investigaciones Cientificas Venezuela
Carmen Rosales Universidad Simón Bolívar Venezuela EPDM/Polyolefin Nanocomposites TPVs Po-36
Rosestela Perera Universidad Simón Bolívar Venezuela
Mireya Matos Universidad Simón Bolívar Venezuela
Massimiliano Scattolini Universidad Simón Bolívar Venezuela
Karina Nunez Universidad Simón Bolívar Venezuela
Olga P. Grigoryeva Institute of Macromolecular Chemistry of the National Academy of Sciences Ukraine EFFECT OF PHYSICAL CROSS-LINKS ON STRUCTURE AND PROPERTIES OF MICROHETEROGENEOUS IONOMER-CONTAINING POLYMER BLENDS Po-37
Jean-Marc Saiter Universite de Rouen France
Jean Grenet Universite de Rouen France
Lyudmila M Sergeeva Institute of Macromolecular Chemistry Ukraine
Oleg V Shekera Institute of Macromolecular Chemistry Ukraine
Chin-lung Chiang Hungkuang University Taiwan PREPARATION, CHARACTERIRATION AND PROPERTIES OF NOVEL ORGANIC/INORGANIC EPOXY HYBRID Po-38
Ri-cheng Chang Hungkuang University Taiwan
Rosestela Perera Simon Bolivar University Venezuela Composites of PET and PBT/PP with Bentonite Po-39
Carmen Rosales Simon Bolivar University Venezuela
Maria Antonia Araque Simon Bolivar University Venezuela
Maria Alejandra Coelho Simon Bolivar University Venezuela
Pingsheng Liu Nanjing Normal University China Synthesis and characterization of waste polyethylene film-graft-acrylic acid/montmorillonite superabsorbent composite Po-40
Li Li Nanjing Normal University China
Ninglin Zhou Nanjing Normal University China
Jun Zhang Nanjing Normal University China
Shaohua Wei Nanjing Normal University China
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.