2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/10 (Tue.) -- Room B-2

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/10(Tue.) -- Room A / B-2 / F / G / H / I / J / K

Tuesday Morning (July 10) -- Room B-2: 9:20-14:20
Session Title: Structural Health Monitoring for Composites (Specialist Session)
Name Affiliation Country Paper Title pdf
Organizers Nobuo Takeda The University of Tokyo Japan
Alfredo Guemes Universidad Politecnica de Madrid Spain
Chairperson(s): Stephen L. Ogin
Keynote Jose M. Menendez Airbus España Spain SENSING WITH EMBEDDED FIBER BRAGG GRATINGS IN EXTREME MECHANICAL CONDITIONS TuBM1-01
Antonio Fernandez Universidad Politecnica de Madrid Spain
Alfredo Guemes Universidad Politecnica de Madrid Spain
Shinji Komatsuzaki Hitachi Cable,ltd Japan Embedded FBG sensors and AWG-based wavelength interrogator for health monitoring of composite materials TuBM1-02
Seiji Kojima Hitachi Cable,ltd Japan
Akihito Hongo Hitachi Cable,ltd Japan
Nobuo Takeda The University of Tokyo Japan
Tateo Sakurai R&D Institute of Metals and Composite for Future Industries Japan
Hideki Soejima Fuji Heavy Industries ltd. Japan Experimental investigation of impact damage detection for CFRP structure by lamb wave sensing using FBG/PZT hybrid system TuBM1-03
Noritsugu Nakamura Fuji Heavy Industries ltd. Japan
Toshimichi Ogisu Fuji Heavy Industries ltd. Japan
Yoji Okabe The University of Tokyo Japan
Nobuo Takeda The University of Tokyo Japan
Yoji Okabe The University of Tokyo Japan Debonding Detection in CFRP Bonded Structures Using Propagation Properties of Lamb Waves TuBM1-04
Kazuki Natori The University of Tokyo Japan
Nobuo Takeda The University of Tokyo Japan
Toshimichi Ogisu Fuji Heavy Industries Ltd. Japan
Chairperson(s): Jinsong Len
Sang-Oh Park Korea Advanced Institute of Science and Technology Korea MONITORING OF HIGH FREQUENCY VIBRATION SIGNAL USING FBG DEMODULATION TuBM1-05
Sang-Wuk Park Korea Advanced Institute of Science and Technology Korea
Chun-Gon Kim Korea Advanced Institute of Science and Technology Korea
Takashi Yari Mitsubishi Heavy Industries, LTD. Japan Enhancement of BOCDA System for Airplane Structural Health Monitoring TuBM1-06
Masahito Ishioka Mitsubishi Heavy Industries, LTD. Japan
Kanehiro Nagai Mitsubishi Heavy Industries, LTD. Japan
Kazuo Hotate The University of Tokyo Japan
Shoji Adachi Yokogawa Electric Corporation Japan
Antonio Fernandez-Lopez Politecnic University of Madrid Spain DAMAGE DETECTION IN A STIFFENED CURVED PLATE BY MEASURING THE DIFFERENTIAL STRAINS TuBM1-07
Jose Manuel Menendez Airbus España Spain
Alfredo Guemes Politecnic University of Madrid Spain
Francis Collombet University of Toulouse III France ON THE USE OF OPTICAL FIBRES WITH BRAGG GRATINGS FOR THE IDENTIFICATION OF PROCESS-PROPERTIES RELATIONS OF COMPOSITE STRUCTURES TuBM1-08
Matthieu Mulle University of Toulouse III France
HilarioHernandez Moreno University of Toulouse III France
top

Tuesday Afternoon (July 10) -- Room B-2: 14:20-18:50
Session Title: Composites Testing and Model Identification (Specialist Session)
Name Affiliation Country Paper Title pdf
Organizers Michael R. Wisnom University of Bristol UK
Masamichi Kawai Tsukuba University Japan
Chairperson(s): Michael R Wisnom
Keynote Robert J Young University of Manchester UK FULL-FIELD ANALYSIS OF FIBRE DEFORMATION AND MODEL VERIFICATION IN WOVEN COMPOSITES TuBA1-01
Prabhakaran Kannan University of Manchester UK
Stephen J Eichhorn University of Manchester UK
Janice M Dulieu-Barton University of Southampton UK STRESS ANALYSIS OF BONDED JOINTS IN PULTRUDED GRP COMPONENTS TuBA1-02
Alessandro Gherardi University of Southampton UK
Stephen W Boyd University of Southampton UK
Ole Thybo Thomsen Aalborg University UK
David H Mollenhauer United States Air Force Research Laboratory USA Analysis and Measurement of Scarf-Lap and Step-Lap Joint Repair in Composite Laminates TuBA1-03
Greg Schoeppner United States Air Force Research Laboratory USA
Brian Fredrickson United States Air Force Research Laboratory USA
Endel Iarve University of Dayton Research Institute USA
Stepan V. Lomov Katholieke Universiteit Leuven Belgium PECULIARITIES OF DAMAGE BEHAVIOUR OF NCF CARBON/EPOXY LAMINATES UNDER TENSION TuBA1-04
Vallons Katleen Katholieke Universiteit Leuven Belgium
Ivanov S. Dmitry Katholieke Universiteit Leuven Belgium
Ignaas Verpoest Katholieke Universiteit Leuven Belgium
Dmitry V. Klimshin St-Petersburg State Polytechnical University Russia
Didier BAPTISTE ENSAM France IDENTIFICATION OF THE MECHANICAL PROPERTIES OF THE INTERPHASE IN A COMPOSITE MATERIAL BY MEASUREMENTS OF KINEMATICS FIELDS. TuBA1-05
Karen Triconnet ENSAM France
Katell Derrien ENSAM France
Chairperson(s): Masamichi Kawai
Michael R Wisnom University of Bristol UK SPECIMEN SIZE EFFECTS ON THE NOTCHED STRENGTH OF COMPOSITE LAMINATES LOADED IN TENSION TuBA2-01
Ben Green University of Bristol UK
Wenguang Jiang University of Bristol UK
Stephen R Hallett University of Bristol UK
Constantinos Soutis The University of Sheffield, Aerospace Engineering UK Specimen size effects on notch sensitivity of composite laminates loaded in compression TuBA2-02
Jounghwan Lee The University of Sheffield UK
Pedro P Camanho University of Porto Portugal SIZE EFFECTS ON THE STRENGTH OF NOTCHED COMPOSITES TuBA2-03
Pere Maimi University of Girona Spain
Carlos G Davila NASA Langley Research Center USA
Silvestre T Pinho Imperial College London UK A Smeared Crack Model for Simulating Damage in Laminated Composites TuBA2-04
Pedro P Camanho Universidade do Porto Portugal
Carlos G Davila NASA Langley Research Center USA
Abdul Rahim A Arafath The University of British Columbia Canada Modelling Process-Induced Deformations in Composite Structures using Higher Order Elements TuBA2-05
Reza Vaziri The University of British Columbia Canada
Anoush Poursartip The University of British Columbia Canada
Felicity J. Guild Queen Mary, University of London UK Matrix Cracking in CFRP Laminates TuBA2-06
Nadia Balhi University of Bristol UK
Nikos Vrellos School of Engineering, University of Surrey UK
Stephen L. Ogin School of Engineering, University of Surrey UK
Paul A. Smith School of Engineering, University of Surrey UK
Frank R Jones The University of Sheffield UK Influence of matrix cracks on stress transfer between glass fibres and epoxy resin using photoelasticity TuBA2-07
Fangming Zhao The University of Sheffield UK
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.