Session Title Presentation Order Date First Name Last Name Country Affiliation Presentation Title
Fibres, Matrices and Interfaces /Experimental Characterization W20-1 Aug. 24th Xiang LI China Northwestern Polytechnical University LOW VELOCITY IMPACT DAMAGE CHARACTERISTICS OF INTERLAYER TOUGHENED COMPOSITE LAMINATES
Fibres, Matrices and Interfaces /Experimental Characterization W20-2 Aug. 24th Rongguo Wang China Harbin Institute of Technology A NUMERICAL AND EXPERIMENTAL INVESTIGATION ON DELAMINATION BUCKLING BEHAVIOR IN LAMINATED COMPOSITES UNDER COMPRESSIVE LOAD
Fibres, Matrices and Interfaces /Experimental Characterization W20-3 Aug. 24th Nanlin Han China Advanced Fiber Materials Technologies Co., Ltd. LOW COST HIGH STRENGTH 3D COMPOSITES
Impact and Dynamic Response W21-1 Aug. 24th Ali Goodarzi Iran Amirkabir University of Technology Analysis of shock response of sandwich composites
Impact and Dynamic Response W21-2 Aug. 24th Seong-Jin Kim Korea Pusan National University EVALUATION OF STRUCTURAL BEHAVIOR OF LNG INSULATION SYSTEM UNDER IMPACT LOADS
Impact and Dynamic Response W21-3 Aug. 24th Yo-Han Kim Korea Gyeongsang National University (GNU) Performance Analyses of a 10MW Composite Wind-Turbine Blade Considering Aeroelastic Effects
Mechanical and Physical Properties W22-1 Aug. 24th Yongbum Choi Japan Hiroshima University TENSILE AND IN-PLANE/INTER-LAMINAR SHEAR FAILURE BEHAVIOR OF NITE-SiC/SiC COMPOSITE
Mechanical and Physical Properties W22-2 Aug. 24th Chang-Mou Wu Taiwan FCU EFFECTS OF CRYSTALLINE MORPHOLOGIES ON THE MECHANICAL PROPERTIES OF CARBON FIBER REINFORCING POLYMERIZED CYCLIC BUTYLENES TEREPHTHALATE COMPOSITES
Mechanical and Physical Properties W22-3 Aug. 24th Vladimir Stavrovsky Czech Republic Czech Technical University in Prague THERMAL AND MECHANICAL BEHAVIOR OF ANGLE SECTION OF COMPOSITES WITH A SINGLE AND DOUBLE CURVATURE
Processing and Manufacturing Technologies W23-1 Aug. 24th Yeonhee JUNG France ENSM-SE RTM process simulation by using XFEM and levet set method
Processing and Manufacturing Technologies W23-2 Aug. 24th Woo-Suck HAN France ENSM-SE PROCESS OPTIMIZATION OF COMPOSITE PANELS WITH COMPRESSION MOLDING
Processing and Manufacturing Technologies W23-3 Aug. 24th Christian Lauter Germany University of Paderborn MULTI-MATERIAL SYSTEMS FOR TAILORED AUTOMOTIVE STRUCTURAL COMPONENTS
Delamination and Interlaminar Reinforcement W24-1 Aug. 24th Yuta Morioka Japan Purdue University A SIMPLE METHOD FOR CALCULATING STRESS INTENSITY FACTORS FOR INTERLAMINA CRACKS IN COMPOSITE LAMINATES
Delamination and Interlaminar Reinforcement W24-2 Aug. 24th Wenyi Yan Australia Monash University NUMETRICAL STUDY ON CARBON FIBRE PULLOUT USING A COHESIVE ZONE MODEL
Delamination and Interlaminar Reinforcement W24-3 Aug. 24th Debo Liu China Beihang University STUDY OF DYNAMIC AND PERMANENT INDENTATION OF LAMINATES SUBJECTED TO LOW-VELOCITY IMPACT
Nanocomposites W25-1 Aug. 24th Richard Liang U.S.A. Florida State University THE HIGH CURRENT-CARRYING CAPACITY OF CNT ENHANCED COMPOSITES
Nanocomposites W25-2 Aug. 24th Pietro Russo Italy ICTP CNR PROCESS-PROPERTIES RELATIONSHIPS OF THERMOPLASTIC POLYURETHANE BASED MATERIALS FILLED WITH CARBON NANOTUBES
Nanocomposites W25-3 Aug. 24th Jinglei Xiang U.S.A. Michigan State University Electrical and thermal conductivities of Au nanoparticle decorated graphene nanoplatelet 'paper'
Nanocomposites W25-4 Aug. 24th Shafi Ullah KHAN Hong Kong Hong Kong university of science and technology Interlaminar Properties of CFRP Composites with CNF-Bucky Paper Interleaves
Nanocomposites W25-5 Aug. 24th Yao Li China Harbin Institute of Technology FABRICATION AND OPTICAL PROPERTIES OF AIR SPHERE/SILICON NANOCOMPOSITE
Nanocomposites W25-6 Aug. 24th Hansang Kim Korea Korea Institute of Science and Technology Carbon fiber composites reinforced with carbon nanomaterials
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-1 Aug. 24th Young Kwon U.S.A. Naval Postgraduate School Dynamic Response and Failure of Composite and Sandwich Structures under Fluid Structure Interaction
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-2 Aug. 24th Arun Shulka U.S.A. University of Rhode Island UNDERWATER EXPLOSIVE LOADING OF E-GLASS / VINYL ESTER COMPOSITE PLATES: CORRELATION OF EXPERIMENTS AND SIMULATIONS
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-3 Aug. 24th John Dear United Kingdom Imperial College London INVESTIGATION INTO THE BLAST LOADING OF POLYMER COMPOSITE MATERIALS IN MARINE STRUCTURES
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-4 Aug. 24th Veronica Eliasson Sweden University of Southern California Fluid-solid interaction during a shock wave impact on a converging composite structure
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-5 Aug. 24th Mark Battley New Zealand University of Auckland Dynamic performance of marine sandwich panel structures
ONR SESSIONS - Research in Composites Materials and Sandwich Structures W26-6 Aug. 24th Siddharth  Avachat  U.S.A.  Georgia Institute of Technology Effect of Facesheet Thickness on Dynamic Response of Composite Sandwich Plates to Underwater Impulsive Loading
Durability of Polymer Matrix Composites W27-1 Aug. 24th Dinh Quy VU France INSTITUT P’-CNRS-ENSMA-Universite de Poitiers THE EFFECT OF THERMO-OXIDATION ON MATRIX CRACKING OF CROSS-PLY [0/90]s COMPOSITE LAMINATES
Durability of Polymer Matrix Composites W27-2 Aug. 24th Shaoxiong LIANG France Institut Superieur de l'Automobile et des Transpor Fatigue behavior of flax/epoxy composite
Durability of Polymer Matrix Composites W27-3 Aug. 24th Akira Kudo Japan Natinal Defense Academy ESTIMATION OF WEATHERABILITY FLEXURAL PROPERTIES FOR CFRP SUBJECTED TO LONG-TERM OUTDOOR EXPOSURE
Durability of Polymer Matrix Composites W27-4 Aug. 24th Marcin Kaminski Poland Technical University of Lodz NUMERICAL ANALYSIS OF STOCHASTIC EFFECTIVE PROPERTIES FOR THE POLYMER-BASED COMPOSITES
Durability of Polymer Matrix Composites W27-5 Aug. 24th Kyun Woo Korea Korea Electric Power Research Institute A STUDY ON THE ENHANCEMENT OF DURABILITY PERFORMANCE OF FACED SLAB CONCRETE IN CFRD
Durability of Polymer Matrix Composites W27-6 Aug. 24th Yeong Kim Korea Korea Aerospace University MECHANICAL BEHAVIOR ANALYSES OF PLASTICS UNDER ENVIRONMENTAL CHANGES
Aerospace Applications W28-1 Aug. 24th Jae San Yoon Korea KAIST Micro Deformation Measurement System Construction For Highly Dimensional Stable Composite due to Out-gassing in Space
Aerospace Applications W28-2 Aug. 24th Khanh-Hung Nguyen Korea Gyeongsang National University A Parametric Study of the Impact Behavior of a Honeycomb Sandwich structure
Aerospace Applications W28-3 Aug. 24th JongCheon Kim Korea Seoul National University of Science & Technology DEVELOPMENT OF SINGLE CRYSTALLINE SILICON SOLAR CELLS LAY-DOWN PROCESS ON COMPOSITES
Aerospace Applications W28-4 Aug. 24th Yong-Bin Park Korea Gyeongsang National University STRENGTH OF COMPOSITE SANDWICH JOINTS UNDER HYGROTHERMAL CONDITION
Aerospace Applications W28-5 Aug. 24th Wanggu Kang Korea Korea Aerospace Research Institute commercial transport aircraft composite wing box trade study
Aerospace Applications W28-6 Aug. 24th Jung Jin Lee Korea Korea Aerospace Research Institute Structures development of Smart UAV
Full-field Measurements for Composites Testing W29-1 Aug. 24th Fabrice Pierron France Arts et Metiers ParisTech THROUGH-THICKNESS SHEAR MODULUS IDENTIFICATION FROM FULL-FIELD SURFACE MEASUREMENTS
Full-field Measurements for Composites Testing W29-2 Aug. 24th Peng Wang China Aalborg University COMPOSITE REINFORCEMENT FORMING SIMULATION: CONTINUOUS AND MESOSCOPIC APPROACHES
Full-field Measurements for Composites Testing W29-3 Aug. 24th Michael Wisnom United Kingdom University of Bristol DETECTING BARELY-VISIBLE IMPACT DAMAGE IN COMPOSITES USING FULL-FIELD SLOPE MEASUREMENTS
Full-field Measurements for Composites Testing W29-4 Aug. 24th Sanjay Sisodia Sweden KTH Royal Institute of Technology FATIGUE TESTING OF COMPOSITES WITH IN-SITU FULL-FIELD STRAIN MEASUREMENT
Full-field Measurements for Composites Testing W29-5 Aug. 24th Shufeng Zhang United Kingdom University of Southampton Thermal degradation of polymeric foam core materials for sandwich structures
Full-field Measurements for Composites Testing W29-6 Aug. 24th Andrew Makeev U.S.A. Georgia Institute of Technology A Method for Measurement of Three-Dimensional Constituitve Properties for Composite Materials
Stability of Thin Walled Structures W30-1 Aug. 24th Haim Abramovich Israel Technion, I.I.T. THIN WALLED COMPOSITE SHELLS UNDER AXIAL IMPULSIVE LOADING
Stability of Thin Walled Structures W30-2 Aug. 24th Jae-hyouk Choi Korea Chosun University ANALYTICAL STUDY ON POST-BUCKLING RESIDUAL STRENGTH OF STEEL FRAME
Stability of Thin Walled Structures W30-3 Aug. 24th Erik Lund Denmark Aalborg University Nonlinear Buckling Optimization of Laminated Composites including “Worst” Shape Imperfections
Stability of Thin Walled Structures W30-4 Aug. 24th Jin-Xing Shi Japan Shinshu University SMALL SCALE EFFECT ON THE BUCKLING ANALYSIS OF DOUBLE-LAYER GRAPHENE NANORIBBONS EMBEDDED IN AN ELASTIC MATRIX
Biomedical Composites W31-1 Aug. 24th Yudong Zheng China University of Science and Technology Beijing PRELIMINARY STUDY ON MECHANICAL PROPERTIES OF BACTERIAL CELLULOSE/PVA MULTILAYER COMPOSITE HYDROGELS
Biomedical Composites W31-2 Aug. 24th Siang-Ling Lin Taiwan Feng Chia University Gold Nanoparticle modified PVA/GOx Biocomposite Membranes via Electrospun for Biosensor Applications
Biomedical Composites W31-3 Aug. 24th Csaba Balazsi Hungary Research Inst. for Techn. Phys and Mat. Sci. SPARK PLASMA SINTERED HYDROXYAPATITE - ZIRCONIA COMPOSITES: STRUCTURAL AND MECHANICAL PROPERTIES
Biomedical Composites W31-4 Aug. 24th Victor Leung Canada The University of British Columbia POLYMER-BASED COMPOSITE NANOFIBRES FOR WOUND HEALING APPLICATIONS
Biomedical Composites W31-5 Aug. 24th Sung-Woo Cho Sweden University of Boras Three dimensional woven bone tissue engineering scaffolds of melt-spun poly(lactic acid) fibres
Biomedical Composites W31-6 Aug. 24th Sandy Lin New Zealand The University of Auckland COMPARISON OF NANOPOROUS SCAFFOLDS MANUFACTURED BY ELECTROSPINNING AND NANOFIBRILLAR COMPOSITE CONCEPT
Textile Composites: 3D Preforming and Damage Tolerance W32-1 Aug. 24th Johan van Ravenhorst Netherlands University of Twente A spool pattern tool for circular braiding
Textile Composites: 3D Preforming and Damage Tolerance W32-2 Aug. 24th Min-Cheol Song U.S.A. University of Florida MODELING OF 3D WOVEN COMPOSITES CONTAINING MULTIPLE DELAMINATIONS
Textile Composites: 3D Preforming and Damage Tolerance W32-3 Aug. 24th Tetsusei KURASHIKI Japan Osaka University Estimation of Mechanical Behaviors for Textile Composites based on Multi-scale Analysis
Textile Composites: 3D Preforming and Damage Tolerance W32-4 Aug. 24th David Jesson United Kingdom University of Surrey DAMAGE DEVELOPMENT IN A GLASS/EPOXY NON-CRIMP 3D ORTHOGONAL WOVEN FABRIC COMPOSITE
Textile Composites: 3D Preforming and Damage Tolerance W32-5 Aug. 24th Prasad Potluri United Kingdom University of manchester Preforming of fibre bridging for improved damage tolerance
Textile Composites: 3D Preforming and Damage Tolerance W32-6 Aug. 24th Tae-Jun Ko Korea Seoul National University FABRICATION OF HIGH ASPECT RATIO WRINKLES BY CARBON DEPOSITION ON SOFT POLYMER
Carbon and Ceramic Matrix Composites W33-1 Aug. 24th Hiroshi Ito Japan Yamagata University High Thermal Conductivity of Thin-wall Injection Molded Parts for AlN/PBT Composites
Carbon and Ceramic Matrix Composites W33-2 Aug. 24th Sea-Hoon Lee Korea KIMS DENSIFICATION OF AL4SIC4-SIC CONTAINING TYRANO-SA SIC FIBER
Carbon and Ceramic Matrix Composites W33-3 Aug. 24th Sai Wang China Harbin Institute of Technology PREPARATION AND PROPERTIES OF SELF-HEALING CARBON FIBER REINFORCED EPOXY COMPOSITE
Carbon and Ceramic Matrix Composites W33-4 Aug. 24th Anatoliy Romanenko Russia Nikolaev Institute of Inorganic Chemistry SB RAS INFLUENCE OF DIELECTRIC MATRIX ON ELECTROPHYSICAL PROPERTIES OF MWNT-BASED NANOCOMPOSITES
Carbon and Ceramic Matrix Composites W33-5 Aug. 24th Olivier Remy Belgium Vrije Universiteit Brussel Cement Composite Stay-In-Place Formworks: a concept for future building systems
Carbon and Ceramic Matrix Composites W33-6 Aug. 24th Tine Tysmans Belgium Vrije Universiteit Brussel TEXTILE REINFORCED CEMENT COMPOSITES FOR THE DESIGN OF VERY THIN SADDLE SHELLS: A CASE STUDY
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-1 Aug. 24th Alfonso Maffezzoli Italy University of Salento TRANSVERSE FLOW DURING IMPREGNATION OF FABRICS WITH THERMOPLASTIC MATRICES
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-2 Aug. 24th Plamen Kravaev Germany RWTH Aachen University Nano-modified thermoplastic pre-forms for the manufacturing of composite structures
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-3 Aug. 24th Reda el Hak OURAHMOUNE France Ecole Centrale de Lyon Effect of sandblasting substrate treatment on single lap shear strength of adhesively bonded PEEK and its composites
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-4 Aug. 24th Stephane Villalonga France CEA Application of full thermoplastic composite for type IV 70MPa high pressure vessels
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-5 Aug. 24th Durai Prabhakaran R T Denmark Risø National Laboratory for Sustainable Energy Thermoplastic composites for future wind turbine blades - Pros and Cons
Processing and Manufacturing Technologies/Thermoplastic Composite Materials W34-6 Aug. 24th Kwang Su Kim Korea Hanyang University FABRICATION OF COPPER LINE PATTERN BY VARYNG SCANNING SPEED USING NANO PARTICLE DEPOSITION SYSTEM (NPDS) FOR THE APPLICATION OF DIRECT PRINTING TECHNOLOGY
Delamination and Interlaminar Reinforcement W35-1 Aug. 24th Kim Branner Denmark Technical University of Denmark COMPARISON OF TWO FINITE ELEMENT METHODS WITH EXPERIMENTS OF DELAMINATED COMPOSITE PANELS
Delamination and Interlaminar Reinforcement W35-2 Aug. 24th Ye Lu Australia University of Sydney MONITORING OF DELAMINATION ONSET IN COMPOSITE LAMINATES USING LAMB WAVE SIGNALS
Delamination and Interlaminar Reinforcement W35-3 Aug. 24th Carla Canturri United Kingdom Imperial College London DELAMINATION GROWTH MECHANISM FROM EMBEDDED DEFECTS IN COMPRESSION
Delamination and Interlaminar Reinforcement W35-4 Aug. 24th Masahiro Arai Japan Shinshu University Mixed Modes Interlaminar Fracture Toughness of CFRP Laminates Toughened with CNF Interlayer
Delamination and Interlaminar Reinforcement W35-5 Aug. 24th Kyong Yop Rhee Korea Kyung Hee University Tribological Behavior of Carbon Nanotube Reinforced Basalt/Epoxy Woven Composites

top