ICCM21 Proceedings

Tswai Award
Paper ID	Full Paper Title	Author	Paper ID
3597	Multi-scale internal geometry analysis and mechanical modeling of randomly oriented strands	Yi Wan, Jun Takahashi (The University of Tokyo)	3597
3418	GRAPHENE NANOCOMPOSITES: A STUDY ON THE FAILURE BEHAVIOR AND SCALING	Yao Qiao, Cory Hage Mefford and Marco Salviato (University of Washington)	3418
3697	A study on fiber-arrangement close to the root of a sharp notch, for short fiber-reinforced thermoplastics	R. Pietrogrande (Robert Bosch GmbH, University of Padova)	3697
3830	UNDERSTANDING AND MODELLING VARIABILITY IN MODULUS AND STRENGTH OF TOW-BASED DISCONTINUOUS COMPOSITES	Y. Li, S. Pimenta, C. Ottenwelter, M. Thierry (Imperial College London South Kensington Campus)	3830
3906	DAMAGE MODELLING OF THIN-PLY NANO-REINFORCED COMPOSITE LAMINATES	Carolina Furtado, (DEMec, Faculdade de Engenharia da Universidade do Porto; INEGI, Instituto de Ci^encia e Inova¸c~ao em Engenharia Mec^anica e Engenharia Industrial), Xinchen Ni (Massachusetts Institute of Technology), Estelle Cohen (Massachusetts Institute of Technology),  Albertino Arteiro (DEMec, Faculdade de Engenharia da Universidade do Porto; INEGI, Instituto de Ci^encia e Inova¸c~ao em Engenharia Mec^anica e Engenharia Industrial),  Brian L. Wardle (Massachusetts Institute of Technology), Pedro P. Camanho (DEMec, Faculdade de Engenharia da Universidade do Porto; INEGI, Instituto de Ci^encia e Inova¸c~ao em Engenharia Mec^anica e Engenharia Industrial)	3906
4011	MODIFICATION OF CHEMICALLY STABLE POLYMERIC MATERIALS 88.  IMPROVEMENT IN THE ADHESION PROPERTY OF POLYOLEFIN, SILICONE RESIN, AND FLUOROCARBON RESIN	Aya Inada1 and Hitoshi Kanazawa2 1 Department of Industrial Systems, Faculty of Symbiotic Systems Science, Fukushima University, Fukushima, Japan 2 Department of Industrial Systems, Faculty of Symbiotic Systems Science, Fukushima University, Fukushima, Japan; kana@sss.fukushima-u.ac.jp	4011
4308	The investigations of multi-layer interface failure behavior for sisal fiber reinforced composites via acoustic emission and finite element method	Qian Li (Tongji University, The Hong Kong Polytechnic University), Yan Li (Tongji University), Limin Zhou (The Hong Kong Polytechnic University)	4308
4111	Improvements to the Mode I Interlaminar Fatigue Resistance of Epoxy Nanocomposites with Aligned Graphene Nanoplatelets	MUnited Kingdomesh Bhasin (RMIT University), Shuying Wu (RMIT University), Raj B. Ladani (RMIT University), Anthony J. Kinloch (Imperial College London), Chun H. Wang (University of New South Wales), Adrian P. Mouritz (RMIT University)	4111
Theme 1 Materials Science
1.1 Track Polymer Matrix Materials
Paper ID	Full Paper Title	Author	Paper ID
2814	CHARACTERIZING BIAXIALLY STRETCHED POLYPROPYLENE/GRAPHENE NANOPLATELET COMPOSITES	B. Mayoral (Queen's University Belfast), E. Harkin-Jones (University of Ulster), N. Khanam (Qatar University), M.A. AlMaadeed (Qatar University), M. Ouederni (Qatar Petrochemical Company), A. Hamilton (Queen's University Belfast), D. Sun (Queen's University Belfast)	2814
2885	CONVENIENT CONTROL OVER HIGH TEMPERATURE SHAPE MEMORY POLYMERS	Deyan Kong, Xinli Xiao (Harbin Institute of Technology)	2885
2899	PREDICTION OF MODULUS AND FRACTURE TOUGHNESS OF THE CARBON NANOTUBES /POLYMER COMPOSITES BY USING MODIFIED HALPIN-TSAI EQUATIONS	Bin Ya, Bingwen Zhou, Linggang Meng, Xingguo Zhang (Dalian University of Technology)	2899
2910	Uniaxial Dynamic compressive Properties of HTPB casting explosives	Youcai Xiao, Yi Sun (Harbin Institute of Technology)	2910
2928	A Branched Silicon-Containing Arylacetylene Resin	Manping Ma, Qiaolong Yuan, Farong Huang (East China University of Science and Technology)	2928
2929	Performance study on the flame retardant self-adhesive resin composites	Wuyunqiqige (AVIC Composite Corporation LTD)	2929
2972	Performance study on the  flame retardant epoxy resin composites	Wuyunqiqige (AVIC Composite Corporation LTD, Beijing,101300,China)	2972
3004	FACILE SYNTHESIS OF NICKEL MANGANESE SULFIDE ANCHORED GRAPHITIC CARBON NITRIDE/GRAPHENE ELECTRODE FOR SUPERCAPACITOR APPLICATION	Parthasarathi Bandyopadhyay, Thanh Tuan Nguyen, Dai Jiu Yi, Nam Hoon Kim, Joong Hee Lee (Chonbuk National University)	3004
3002	EFFECT OF BORIC ACID ON THE OXYGEN GAS BARRIER PROPERTES OF POLY(VINYL ALCOHOL-CO-ETHYLENE)/GRAPHENE OXIDE NANOCOMPOSITE FILMS	Xuyang Li, Parthasarathi Bandyopadhyay, Tolendra Kshetri, Nam Hoon Kim, Joong Hee Lee (Chonbuk National University)	3002
3069	BORON NITRIDE NANOSHEET (BNNS) FILLED PMMA NANOFIBERS AS FILLER FOR COMPOSITES	Tuğrul Seyhan (Anadolu University)	3069
3081	EFFECT OF SURFACE BRAIDED ANGLE ON VIBRATION MODAL OF A NOVEL THREE-DIMENSION AND FOUR-DIRECTION BRAIDED COMPOSITE T-BEAM	Xiaoyuan Pei (Tianjin Polytechnic University)	3081
3085	3D BORON NITRIDE FOAM REINFORCED FLEXIBLE INSULATED POLYMER WITH HIGH THERMAL CONDUCTIVITY	Haoming Fang, Shulin Bai (Peking University)	3085
3089	Correlation of the Cure Degree of an Epoxy Resin with the Dielectric Properties	M.Sc. Amke Eggers, M.Sc. Dilmurat Abliz, Prof. Dr.-Ing. Gerhard Ziegmann, Prof. Dr.-Ing. Dieter Meiners (Clausthal University of Technology)	3089
3099	Properties of quartz fabrics reinforced cyanate ester resin composites produced by RTM processing	Guo Yalin, Zhang Xiaohu, Cui Hong, Liao Yingqiang, Gao Kezhou, Zhang Shijie, Jing Kuan, Deng Jie, Cheng Minsu (Xi'an Aerospace Composites Research Institute)	3099
3171	Modeling of the Resin Viscoelasticity in the Forming Process of Thermoplastic Composites	Qi Wu (The University of Tokyo, Nanjing University of Aeronautics and Astronautics), Tomotaka Ogasawara (The University of Tokyo), Nobuhiro Yoshikawa (The University of Tokyo)	3171
3179	SYNTHESIS AND CHARACTERIZATION OF FLAME RETARDENT THERMOSET POLT (LACTIC ACID) (PLA)	Fei Sun, Xiang Kong, Tao Yu, Yan Li (Tongji University)	3179
3219	Lightweight Carbon Nanotube Conductor with High Electrical Conductivity and Stability for Scale-up Manufacturing and Power Transmission Application Study	Songlin Zhang, Jin Gyu Park, Nam Nguyen, Claire Jolowsky, Ayou Hao, Richard Liang (Florida State University)	3219
3240	Elastic parameters prediction under dynamic loading based on the unit cell of composites considering end constraint effect	Wang Meng, Fei Qingguo, Zhang Peiwei (Southeast University)	3240
3243	Preparation and characterization of epoxy resin with low amount of polyetherimide	Min-Joo Kang, Young-Jung Heo, Yinhang Zhang，Ji Won Lee  and Soo-Jin Park (Inha University)	3243
3255	Study on the heat resistance and mechanical properties of polytriazole resin matrix composite influenced by graphene oxide	Shen Zhen, Zeng Jin-fang, Dai Panyao, Wang Kaijie, Wang Xiu-yun (Xi’an Aerospace Composites Research Institute)	3255
3262	Effect of silylation of cellulose micro fibres on the mechanical properties of polydimethylsiloxane composites	Aistė Lisauskaitė, Kristina ŽUnited Kingdomienė, Virginija Jankauskaitė, (Kaunas University of Technology)	3262
3279	INITIAL STUDIES TO CHARACTERISE A POLYMER MATRIX FOR USE IN COMPOSITE WIND TURBINE BLADES	Bethany Russell (University of Bristol), Carwyn Ward (University of Bristol), Shinji Takeda (Hitachi Chemical Company. Ltd), Ian Hamerton (University of Bristol)	3279
3280	SELF-ASSEMBLED GRAPHENE OXIDE MICROCAPSULES REINFORCED WATERBORNE POLYURETHANE COMPOSITE COATINGS FOR SELF-HEALING PROPERTIES	Jing LI1, Qingkang Feng2, Jincan Cui3, Junhe Yang4 1 School of Materials Science and Engineering, University of Shanghai for Science and Technology, No.516 Jungong Road, Shanghai 200093, China. Lijing6080@usst.edu.cn. 2 Fqk163@163.com 3 Cjc.kid1@163.com 4 Jhyang@usst.edu.cn	3280
3286	THE ROLE OF INTERNAL STRESSES IN MICROWIRES ON THEIR SOFT MAGNETIC AND MICROWAVE ABSORBING CHARACTERISTICS	X.F. Zheng, F.X. Qin, H. Wang, H.X.Peng (Zhejiang University)	3286
3348	A NUMERICAL METHOD FOR PREDICTING THE MECHANICAL PROPERTIES OF TIGHTLY PACKED SYNTACTIC FOAMS	A. Mayall (Fergusson Advance Composites Technology), D. Carolan (Imperial College London, University College Dublin), A. Fergusson (Fergusson Advance Composites Technology, Imperial College London), J.P. Dear (Imperial College London)	3348
3353	Influence of Organic Vapor Annealing on Structure and Property of Conjugated Composite Fiber	Xinyue Wang 1, 2, Gu-yu Feng 1, 2, Ming-qiao Ge 1, 2*  1Key Laboratory of Science and Technology of Eco-Textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China 2College of Textile & Clothing, Jiangnan University, Wuxi 214122, China	3353
3373	THE EFFECT OF BOUNDARY CONDITIONS ON THE GENERAL MECHANICAL BEHAVIOR OF SOFT MATERIALS	Mengzhou Chang, Zhenqing Wang (Harbin Engineering University)	3373
3376	Study on a modified phthalonitrile resin system suitable for hot-melt prepreg preparation	Chengyuan Shang, Mengjin Fan, Dongxia Zhang, Hongjie Sun, Yi Zhang (Aerospace Research Institute of Materials&Processing Technology)	3376
3386	GRAPHENE FOAM/CONDUCTIVE POLYMER COMPOSITES FOR LIGHTWEIGHT ELECTROMAGNETIC INTERFERENCE SHIELDING	Ying Wu, Zhenyu Wang, Xu Liu, Xi Shen, Qingbin Zheng, Jang-Kyo Kim, (The Hong Kong University of Science and Technology)	3386
3389	THE METHOD TO IMPROVE INTERFACIAL PROPERTIES OF CFRP COATING NANO-CARBON-MATERIAL ON CF SURFACE	Jianjun Jiang, Xuming Yao, Xinyu Gao (Northwestern Polytechnical University)	3389
3490	Adhesive of Benzoxazine Resin and Adhesion Property	Hongfeng Li, Chunyan Qu, Dezhi Wang, Changwei Liu (Heilongjiang academy of sciences)	3490
3497	Reinforcement on Epoxy-based Composites by Dopamine-coated Graphene Prepared Through High Energy Ball-milling	Shujie Ren, Rongrong Xie, Wengang Yang, Xiaolong Jia, Xiaoping Yang (Beijing University of Chemical Technology)	3497
3502	EFFECTS OF INORGANICS ON THERMAL PROPERTY OF SILICONE RUBBER COMPOSITES	Jiuqiang Song, Yan Qin, Liangdian Liu, Xi Zhang, Zhixiong Huang, (Wuhan University of Technology)	3502
3539	FRAMEWORK FOR PROCESS-RELATED RESIN SELECTION AND OPTIMISATION FOR THE RESIN TRANSFER MOULDING (RTM) OF COMPOSITE MATERIALS	M.Rutt (University of Surrey, McLaren Technology Centre), C.Lekakou (University of Surrey), P.A.Smith (University of Surrey), I.Hamerton (University of Bristol), G.Meeks (McLaren Technology Centre), A.Sordon (McLaren Technology Centre), C.Santoni (McLaren Technology Centre)	3539
3407	Preparation and properties of chopped carbon fiber reinforced PEEK composites	Chen Shu-hua1, Cui Hong, Wang Xi-zhan, Han Jian-ping  Xi’an Aerospace Composites Research Institute, Shaanxi Xi’an 710025, China	3407
3416	HDPE AND PVC CREEP AND THERMAL RATCHETING BEHAVIOR UNDER COMPRESSION	Rahul Palaniappan Kanthabhabha Jeya1, Zijian Zhao2 and Abdel-Hakim Bouzid3  1 École de Technologie Supérieure, Montréal, Québec, Canada, kjrahulpalaniappan@gmail.com 2 École de Technologie Supérieure, Montréal, Québec, Canada, Zijian.Zhao@ens.etsmtl.ca 3 École de Technologie Supérieure, Montréal, Québec, Canada, hakim.bouzid@etsmtl.ca	3416
3555	Influence of graphene derivatives on the selected properties of post-consumer PETG foil	Izabela Irska1*, Sandra Paszkiewicz1, Elżbieta Piesowicz1, Daria Pawlikowska1, Anna Szymczyk2, Zbigniew Rosłaniec1, 1West Pomeranian University of Technology, Institute of Materials Science and Engineering, Szczecin, Poland 2 West Pomeranian University of Technology, Institute of Physics, Szczecin, Poland	3555
3561	MULTIFUNCTIONAL STRUCTURAL BATTERIES BASED ON CARBON FIBER REINFORCED PLASTIC COMPOSITES: INVESTIGATION ON MECHANICAL AND ELECTROCHEMICAL PROPERTIES	Yalin Yu, Boming Zhang (Beihang University)	3561
3579	Deformation and residual stresses during curing of hot-melt impregnated phenolic resin/glass fabric composite	Lei Zixuan, Jiang Xue, Lv You, Liu Yuhong, Jing Xinli (Xi’an Jiaotong University)	3579
3601	CHARACTERISATION AND CURE KINETICS OF MULTI-AROMATIC TETRA-FUNCTIONAL EPOXY RESINS	Russell J. Varley (CSIRO Manufacturing, Deakin University), Buu Dao (CSIRO Manufacturing), Tri Nguyen (CSIRO Manufacturing), Takashi Nishino (Kobe University)	3601
3620	Novel phenylethynyl-terminated polyimide with excellent processability and high thermal stability	Xiuting Li, Jie Dong, Xin Zhao, Qinghua Zhang (Donghua University)	3620
3631	Experimental study on mechanical properties of bisphenol F epoxy resin at different cryogenic temperatures	Zhiwei Li, Lei Yang, Cong Peng, Hongyu Wang, Jialiang Li, Zhanjun Wu (Dalian University of Technology)	3631
3714	Property and morphology study of an epoxy resin modified with ETBN	Yuefang Li, Kang Peng, Zhi Wu (Institute of Electronic Engineering, Chinease Academy of Engineering Physics)	3714
3731	Manufacturing Process and Mechanical Properties of Carbon Fiber/Carbon Nanotube Buckypaper Interply Hybrid Composites	Ayou Hao, Songlin Zhang, Nam Nguyen, Liyu Dong, Claire Jolowsky, Jin Gyu Park, Zhiyong (Richard) Liang (Florida State University)	3731
3768	COMPARATIVE STUDY OF CARBON-BASED NANO-FILLERS/POLYANILINE HYBRIDS REINFORCED POLYMER COMPOSITES	Xiuyan Chenga, Michihiro Yamamotob, Jun Koyanagib, Tomohiro Yokozekia,aDepartment of Aeronautics and Astronautics, University of Tokyo, Bunkyo-ku, Tokyo, Japan bDepartment of Materials Science and Technology, Tokyo University of Science, Tokyo, Japan	3768
3802	Alignment and Graphite Crystal Packing for High Structural Performance of CNT Nanocomposites	Claire Jolowsky, Rebekah Downes, Liyu Dong, Songlin Zhang, Nam Nguyen, Ayou Hao, Jin Gyu Park, Richard Liang (Florida State University)	3802
3839	DIELECTRIC AND THERMAL-PROPERTIES OF POLYVINYLIDENE FLUORIDE COMPOSITES FILLED WITH SURFACE-FUNCTIONALIZED	Weihui Zhu, Jing Ma, Xi Nan, Jianqiang Liu, Wen Qin, Yongzhen Yang (Taiyuan University of Technology)	3839
3840	INVESTIGATION OF THE MECHANICAL AND THERMAL PROPERTIES OF FUNCTIONALIZED CNTS POLYPROPYLENE COMPOSITES	Xi Nan, Jing Ma, Jianqiang Liu, Weihui Zhu, Wen Qin (Taiyuan University of Technology)	3840
3880	A STUDY OF CROSS-LINKING KINETICS OF CYANATE ESTER RESIN	L. Zemni (Institut Clément Ader), G.Dusserre (Institut Clément Ader), G. Bernhart (Institut Clément Ader, IRT Saint Exupéry), B.Boniface (NIMITECH Innovation)	3880
4010	Loading Rate and Temperature Dependence of Flexural Behaviour of GFPP Fabricated by Injection Molding Method	Lichao Yu, Xiaofei Yan, Shuhei Yasuda, Shinji Nojima, Yuqiu Yang, Hiroyuki Hamada (Kyoto Institute of Technology)	4010
4021	Microwave absorption performance simulation of a facile yet unexpectedly effective microwave absorption composite material	Yang Minglong, Yuan Ye, Li Yibin (Harbin Institute of Technology)	4021
4036	Experimental and theoretical study on elastic moduli of porous PDMS with different porosities at different temperatures	Chen Huang (Zhejiang University), Chengfeng Fang (Zhejiang University), Xiaoliang Zhou (Beihang University), Zuguang Bian (Zhejiang University)	4036
4073	STUDY ON CURING PROCESS OPTIMIZATION OF EXTRA-THICK CARBON FIBER REINFORCED EPOXY RESIN MATRIX COMPOSITES AND THEIR PROPERTIES	Hong’en Wang, Xieyao Yuan, Jie Xu, Yang Yang, Weiping Liu (Shanghai Aircraft Manufacturing CO., Ltd)	4073
4105	Characterization of the dielectric properties of unidirectional aramid epoxy composites at varying temperatures by rectangular waveguide method	Xu Xiangyu, Zhang Boming, Bai Ming, Liu Dawei (Beihang University)	4105
4114	Influence of graphene derivatives on the selected properties of post-consumer PETG foil	Izabela Irska, Sandra Paszkiewicz, Elżbieta Piesowicz, Daria Pawlikowska, Anna Szymczyk, Zbigniew Rosłaniec (West Pomeranian University of Technology)	4114
4151	Effects of organic groups grafted carbon nanotube on tensile creep behavior of CNTs/epoxy nano-composites	Xinlong Shang, Jianwei Zhang, Cai Jiang, Su Ju, Dazhi Jiang (National University of Defense Technology)	4151
4193	Mechanical behaviors of thin-ply composite laminates under short-beam shear and open-hole tensile loads: pseudo-homogeneous and isotropic behaviors	Chunfang Huang, Mingchang He, Yonglyu He, Jiayu Xiao, Jianwei Zhang, Su Ju *, Dazhi Jiang *(Department of Materials Science and Engineering, National University of Defense Technology, Changsha, Hunan, 410073, People’s Republic of China)	4193
4204	POLYBENZIMIDAZOLE CARBON FIBRE COMPOSITE – UTILISING A HIGH PERFORMANCE THERMOPLASTIC	Thomas R. Pozegic, Ian Hamerton, Michael R. Wisnom (University of Bristol)	4204
4252	EFFECT OF TYPE OF DIAMINE MODIFIERS OF NANODIAMOND ON TRIBO-MECHANICAL PROPERTIES OF POLYAMIDE 6 COMPOSITES	Pooria Karami, Akbar Shojaei (Sharif University of Technology)	4252
4262	Effect of post treatments on the shrinkage resistance of Melamine foam	Zhang Junxiong, Chen Zhaofeng, Xue Songbai (Nanjing University of Aeronautics and Astronautics)	4262
4273	Cellulose Nanocrystal Reinforced Epoxy Vinyl Ester Resins: Fabrication and Mechanical Properties	L. Thompson, M. Nikzad*, I. Sbarski, J. Miller and A. Yu (Faculty of Science, Engineering and Technology; Swinburne University of Technology, Melbourne, Australia)	4273
4309	Development of a novel Polymer Metal Composite for Brazing Applications	Tamara Florian (Clausthal University of Technology), Gerhard Ziegmann (Clausthal Centre of Material Technology)	4309
4313	Towards the development of a coupled fire-structure model for flax/pp composite beams	Swagata Dutta (The University of Auckland), Raj Das (RMIT University), Debes Bhattacharyya (The University of Auckland)	4313
4327	EFFECTS OF GRAPHENE OXIDE WITH DIFFERENT OXIDATION DEGREE ON THE PROPERTIES OF EPOXY NANOCOMPOSITES	Wanshuang Liu, Xiaoyu Hu, Yi Wei (Donghua University)	4327
4330	Effect of double-sided irradiation dose difference on ILSS for polymer-matrix composites fabricated by in-situ curing with low energy E-Beam	Jingjing Zhang, Yugang Duan, Hongxiao Wang, Zhongqiu Ding, Xiaohui Zhang (Xi’an Jiaotong University)	4330
4331	Combined dynamic mechanical analysis (DMA) and calorimetry for cure monitoring of hollow particle reinforced thermoset composite	M. Bouslah (École centrale de Lyon), M. Salvia (École centrale de Lyon), I. Deschères (Institut Textile et Chimique de Lyon), H. Baurier (ACOEM group)	4331
4525	Gold nanoparticles/poly (vinyl alcohol) shape memory nanocomposites	Wenxin Wang,1,2 Xianbin Liu,2 Wei Xu,1 Hongqiu Wei,1 Yanju Liu,3 Yu Han,4 Peng Jin,4 Hejun Du,2* and Jinsong Leng1* Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin	4525
4528	Mechanical properties at cryogenic temperature of multi-scale  nano-carbon/micro-fiber reinforced epoxy composites	Jian Qian,1 Bao-Gang Sun,1 Yuan-Qing Li,1 Cheng-Bin Qu,2 Hong-Mei Xiao2 and Shao-Yun Fu,1,2 1 College of Aerospace Engineering, Chongqing University, Chongqing  2 Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing	4528
4531	Understanding the mechanism of positive thermal coefficient in conductive polymer composites	Harshit Porwal (Queen Mary University of London)	4531
4534	SELECTIVE LASER SINTERING OF POLYAMIDE12 COMPOSITES	Mengxue Yan, Xiaoyong Tian* and Gang Pengr （State Key Laboratory of Manufacturing Systems Engineering, Xi’an Jiaotong University）	4534
4557	The Variability Control of some CFRP Materials by Nested Method	Bo Li1, Lin Chen2 , Ye Zhang3 and Chuanjun Liu 4  （ Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC）	4557
4566	Low Loading of Grafted Thermoplastic Polystyrene Strengthened and Toughened Transparent Epoxy Composites	Chao Ma, Hongbo Gu (Tongji University )	4566
4573	EFFECTS OF SILICA ON NANO-IMPRINTING PATTERN FORMATION OF PHOTO-REACTIVE ACRYLATE RESINS	Seok Hyeon Kim, Sunhee Park, Kigook Song (Kyung Hee University)	4573
4608	A THERMODYNAMIC ANALYSIS OF THE SHAPE MEMORY ASSISTED SELF HEALING POLYMER	Yiqi Mao1,2,  Meide Yang1,2, Shujuan Hou1,2 1 State Key Laboratory of Advanced Design and Manufacturing for Vehicle BodyHunan UniversityChangshaChina 2. Department of Engineering Mechanics, College of Mechanical & Vehicle Engineering Hunan UniversityChangshaChina	4608
4611	RHEOLOGICAL CHARACTERIZATION OF THERMOSETTING RES-IN SYSTEM WITH THERMOPLASTIC FUNCTIONAL LAYER	W. Surjoseputro, G. Ziegmann (Clausthal University of Technology)	4611
4641	ALL-ARAMID COMPOSITES: THE MORPHOLOGY, MECHANICAL PROPERTIES AND CRYSTALLIZATION	Jian Min Zhang1*, Zeinab Mousavi2, Nattkan Soykeabkaew3 and Ton Peijs2* 1Qingdao University, School of Mechanical and Electrical Engineering, and Power & Energy Storage System Research Center, No. 308 Ningxia Road, Qingdao, P.R. China, 266071 2Queen Mary University of London, School of Engineering and Materials Science, and Materials Research Institute, Mile End Road, London E1 4NS, UK 3Mae Fah Luang University, School of Science, Chiang Rai57110, Thailand	4641
4658	Ceramic/polymer composites with high thermal conductivity and mechanical strength for electronic packaging	Guoping Du, Yong Hu, Nan Chen (Nanchang University)	4658
Theme 1 Materials Science
1.2 Track Ceramic Matrix Composites
Paper ID	Full Paper Title	Author	Paper ID
2802	SYNERGISTIC EFFECTS OF LOADING SEQUENCE AND INTERFACE WEAR ON DAMAGE EVOLUTION IN FIBER REINFORCED CERAMIC-MATRIX COMPOSITES	Li Longbiao (Nanjing University of Aeronautics and Astronautics)	2802
2888	SOLID SOLUTION FORMATION, PRESSURELESS DENSIFICATION, AND PROPERTIES OF TA0.8HF0.2C-BASED COMPOSITES	Buhao Zhang, Jie Yin, Xuejian Liu, Zhengren Huang (Chinese Academy of Sciences)	2888
2903	DAMAGE EFFECTS ON STRENGTH AND LIFE OF OXIDE/OXIDE CMC IN COMBUSTION ENVIRONMENT	Abhendra K. Singh1 and Shankar Mall2  1Research Associate, Department of Aeronautics and Astronautics, Air Force Institute of Technology, WPAFB, OH 45433, USA. Email: abhen.singh@gmail.com  2Professor, Department of Aeronautics and Astronautics, Air Force Institute of Technology, WPAFB, OH 45433, USA. Email: shankar.mall@afit.edu	2903
2914	DEVELOPMENT OF ELECTROPHORETIC DEPOSITION FOR SIC/SIC COMPOSITES	First A. HOU Huining1, Second B. ZHOU Xingui2 and Third C. LI Mingyuan3  1National University of Defense and Technology, Changsha, China, hhn_cathy@163.com 2National University of Defense and Technology, Changsha, China, Professor, zhouxinguilmy@163.com 3National University of Defense and Technology, Changsha, China, m_y_lee@126.com	2914
2917	THE EFFECT OF HEAT TREATMENT ON THERMAL STABILITY OF TI MATRIX COMPOSITE	Jiuxiao Li1,*, YuanFei Han2, Jianwei Mao2, Liqiang Wang2, Weijie Lu2  1 School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201620, P.R.China 2 State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P.R.China * Corresponding author, Tel.: +86 2134202039, E-mail address: lijiuxiao@sjtu.edu.cn	2917
2942	FAILURE MECHANISM OF THE WOOD PLASTIC COMPOSITES	R. Kitamura(Tokyo university of science), A. Hara (Tokyo university of science), S. Ogihara (Tokyo university of science), H. Ito (Toclas Corporation), S. Ogoe (Toclas Corporation), A. Nordin (Ymaguchi university), K. Sakamoto (Ymaguchi university), H. Balqis (Ymaguchi university), K. Goda (Ymaguchi university)	2942
2981	Characterization, mechanical, thermal and ablative properties of ceramic modified phenolic resin aerogels synthesized by ambient pressure drying	Jun Zhang (Harbin Institute of Technology), Rongying Yin (Harbin Aircraft industry (Group) Co. Ltd), Haiming Cheng (Harbin Institute of Technology), Changqing Hong (Harbin Institute of Technology), Xinghong Zhang (Harbin Institute of Technology)	2981
2984	THE PREPARATION PROCESS OF SICN CERAMIC BY PYROLYSIS OF PSN-1	Jinping Li, Yongdong Yu, Songhe Meng, Gaoming Zhang, Yixin Hou (Harbin Institute of Technology)	2984
2986	NOVEL AEROGEL-POROUS ZIRCONIA COMPOSITE WITH ULTRA-LOW THERMAL CONDUCTIVITY	Rubing Zhang, Xianbo Hou (Beijing Jiaotong University)	2986
3068	PREPARATION AND PROPERTIES OF ZRB2-SIC COMPOSITES BY CENTRIFUGAL GEL CASTING PROCESS	Dongyang Zhang, Ping Hu and Xinghong Zhang  Science and Technology on Advanced Composites in Special Environment Laboratory, Harbin Institute of Technology, Harbin 150001, China	3068
3142	Densification of carbon/carbon composites using CNT-containing phenolic resin	Shinn-Shyong Tzeng, Po-Jui Lin (Tatung University)	3142
3202	Fabrication and microstructure of C/C-ZrC-SiC and C/C-HfC-ZrC-SiC composites	Lin Xu, Jia Chen, Xinchao Li, Zhen Fan, Yin Zhang, Botao Han, Zhihai Feng (Aerospace Research Institute of Materials & Technology)	3202
3446	Potentials of nano- and micro- reinforcements applied to ceramic matrix composites	Hui Mei*, Laifei Cheng, Litong Zhang Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an Shaanxi 710072, PR China	3446
3576	Preparation and properties of ZrB2-SiC composites by centrifugal gel casting process	Dongyang Zhang, Ping Hu, Xinghong Zhang (Harbin Institute of Technology)	3576
3643	Properties and microstructure of pressureless sintered and microwave sintered SiC-AlN ceramics	Shuang Zhao, Zichun Yang, Xingui Zhou, Zhe Liu (National University of Defense Technology)	3643
3745	EFFECT OF FIBER SURFACE TREATMENT ON THERMAL/MECHANICAL PROPERTIES OF LIQUID SILICON INFILTRATED CERAMIC MATRIX COMPOSITES	Jong Seob Song (Korea Institute of Energy Research, Chungnam National University), Seyoung Kim (Korea Institute of Energy Research), Insub Han (Korea Institute of Energy Research), Young-hoon Seong (Korea Institute of Energy Research), Soo-hyun Kim (Korea Institute of Energy Research)	3745
3758	ENERGY DISSIPATION MECHANISM OF CERAMIC MATRIX COMPOSITES DURING THE PROCESS OF DWELL	GAO Jubin1, WANG Yangwei2, WANG Fuchi2, SUN Jianzhuo1  1 Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Future Science and Technology Park, Changping District, Beijing, 102211 P.R. China; gaojubin@comac.cc 2 National key laboratory on materials science and technology under shock and impact, School of materials science and technology, Beijing Institute of Technology, Beijing 100081, P.R. China	3758
3787	EFFECTS OF RESIDUAL STRESS ON STRENGTH OF CARBON FIBER-REINFORCED CERAMIC COMPOSITE: THEORETICAL INVESTIGATION AND NUMERICAL SIMULATION	Zhaofu Zhang, Jianjun Sha (Dalian University of Technology)	3787
4084	AN EXPLORATION OF STRUCTURE DESIGN IN 3D BRAIDED CERAMIC MATRIX COMPOSITES TURBINE BLADE DOVETAIL ATTACHMENT	Cheng Zhen, Shi Duoqi,  Jing Xin, Yang Xiaoguang (Beihang University)	4084
4226	EFFECTS OF MICRO-DEFECTS ON THE MECHANICAL PROPERTIES OF CBCFS CARBON-BONDED CARBON FIBER COMPOSITES	Yao Zhang1, Zixing Lu1 and Zhenyu Yang1,* 1 Institute of Solid Mechanics, Beihang University, Beijing, 100083, China,	4226
4354	SYNTHESIS AND CHARACTERIZATION OF ULTRALONG SI3N4 NANOBELTS WITH UNIQUE OPTICAL AND FLEXIBLE NANOMECHANICAL PROPERTIES	Shun Dong, Ping Hu, Xinghong Zhang (Harbin Institute of Technology)	4354
4400	AN OVERVIEW ON THE INTERFACIAL INTERACTIONS BETWEEN CNTS AND THE POLYMER MATRIX	Hui Mei, Laifei Cheng, Litong Zhang (Northwestern Polytechnical University)	4400
4424	A NOVEL DIGITAL LIGHT PROCESSING TECHNOLOGY OF SHORT SiC FIBER REINFORCED SiC MATRIX COMPOSITES	Rujie He, Dong Liang, Keqiang Zhang, Lu Zhang, Lei Hu, Zongwei Tong (Beijing Institute of Technology)	4424
4427	DETERMINATION ON INTERFACIAL FRACTURE TOUGHNESS OF THERMAL BARRIER COATINGS	Qi Zhu1, Gaosheng Yan1, Jianguo Zhu1*, Wei He2 and Daiheng Chen1 1 Faculty of Civil Engineering and Mechanics, Jiangsu University, Jiangsu, China, 212013 2 AML, Department of Engineering Mechanics, Tsinghua University, Beijing, China, 100084 * Corresponding author. E-mail: zhujg@ujs.edu.cn	4427
4478	Microwave and conventional sintering of SiC/SiC composites: Fracture behaviors and microstructures	Mingyuan Lia, Huiyong Yanga, Xingui Zhoua,*, Jinshan Yua, Honglei Wanga a Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China E-mail address: m_y_lee@126.com, yanghuiyong2006@126.com, zhouxinguilmy@163.com, yujinshan@nudt.edu.cn, honglei.wang@163.com	4478
4568	Multiscaled and Multilayered Structures of the SiC/SiC Composite Nuclear Fuel Cladding Tubes	Chen Bo, Liu Chuanxin, Li Xiaoqiang, Cheng Laifei, Zhang Litong (Northwestern Polytechnical University)	4568
Theme 1 Materials Science
1.3 Track Metal Matrix Composites
Paper ID	Full Paper Title	Author	Paper ID
2803	MechanicalPropertyofAl3Nip/AlalloyCompositebyInfiltration&ReactionMethod	Yongbum Choi, Zhefeng Xu, Kenjiro Sugio, Kazuhiro Matsugi, Gen Sasaki (Hiroshima University)	2803
1801	Interfacial delamination and multiple tunnel cracks toughening mechanisms of laminated Ti-(TiBw) composites under three point bending testing	BaoXi Liu (Hebei University of Technology, TianJin key laboratory of materials laminating fabrication and interfacial controlling technology), Lin Geng (Harbin Institute of Technology), LuJun Huang (Harbin Institute of Technology), XueWen Li (Harbin University of Science and Technology), XiPing Cui (Harbin Institute of Technology), FuXing Yin (Hebei University of Technology, TianJin key laboratory of materials laminating fabrication and interfacial controlling technology)	1801
2810	Fabrication and Impact Property of Multi-scale TiB/Ti6Al4V Composites by Powder Metallurgy	S. Wang, L.J. Huang, L. Geng (Harbin Institute of Technology)	2810
2813	MANUFACTURING PROCESS OF HYBRID ALUMINUM MATRIX COMPOSITE BY LOW PRESSURE CASTING	Yoshiki Kataoka, Fei Gao, Yongbum Choi, Zhefeng Xu, Kazuhiro Matsugi, Kenjiro Sugio, Hiroyuki Suzuki (Hiroshima University)	2813
2824	The effect of prolonged heat treatments on the microstructural evolution and mechanical properties of Ti/Ni multialyered composites fabricated by accuulative roll bonding (ARB)	Bing Zhang, Zhijuan Zhang, Xunhui Zhang, Su Yao, Xiaodi Shang, Wen Wang, Le Wang, Kuaishe Wang, Jun Cai (Xi'an University of Architecture and Technology)	2824
2883	Effect of Si content on impact abrasive wear performance of Al2O3p-steel composites prepared by squeeze casting	Dehong Lu, Haizhou Li, Bo Ren, Yehua Jiang (Kunming University of Science and Technology)	2883
2935	Study of the Room Temperature Fracture Toughness of Nb/Nb5Si3 In-Situ Composites Strengthened with CNTsStudy on Microstructure and room temperature fracture toughness of Nb/Nb5Si3 insitu Composites Strengthened with CNTs	Long Wenyuan Chen Benlong (Nanchang Hangkong University)	2935
2956	Enhanced tensile ductility of metallic glass matrix composites with novel microstructure	Yunpeng Jiang (Nanjing University of Aeronautics and Astronautics)	2956
2962	Microstructural Refinement and Enhancement of Mechanical properties of Al (2014) – SiC Composites by Equal Channel Angular Pressing	A. Suresh Babu1, M. Jaivignesh2*, S. Dhanalakshmi3, K. Shanmuga Sundaram4 1 - Assistant Professor, 2 - Research Scholar, Department of Manufacturing Engineering, College of Engineering Guindy, Anna University, Chennai – 600 025, Tamil Nadu, India. 3 -Scientist,Combat Vehicles Research & Development Establishment, DRDO, Avadi – 600 054, Tamil Nadu, India. 4 – Associate Professor, Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai – 600 025, Tamil Nadu, India.	2962
2983	PREPARATION OF TI/AL/AL-CF MULTILAYER LAYERED COMPOSITES AND ITS INTERFACIAL REACTION	Y.C.Tang, L.S.Luo, B.S.Han, L.Lei (Harbin Institute of Technology)	2983
3070	MICROSTRUCTURE AND MECHANICAL BEHAVIOUR OF ALUMINIUM MATRIX COMPOSITES REINFORCED WITH GRAPHENE OXIDE AND CARBON NANOTUBES	Fei Lin, Robert J Young, Ian A Kinloch (University of Manchester)	3070
3138	Influence of TiB2 particles on aging behavior of in-situ TiB2/Al-4.5Cu composites	Rui Du, Qi Gao, Shusen Wu, Shulin LÜ (Huazhong University of Science and Technology)	3138
3141	RESIDUAL STRESS IN NB3SN SUPERCONDUCTOR STRAND INTRODUCED BY STRUCTURE AND STOICHIOMETRIC DISTRIBUTION AFTER HEAT TREATMENT	Peng Jin (Tsinghua University), Lankai Li (Chinese Academy of Science), Xide Li (Tsinghua University), Qiuliang Wang (Chinese Academy of Science), Junsheng Cheng (Chinese Academy of Science)	3141
3144	HOT DEFORMATION AND PROCESSING MAP OF A CNTREINFORCED ALUMINUM COMPOSITE	F. Mokdad1, Z.Y. Liu2, D.R. Ni2, B.L. Xiao2, Z.Y. Ma2, D.Y. Li3, D.L. Chen1,  1Department of Mechanical and Industrial Engineering, Ryerson University, 350 Victoria Street, Toronto, Ontario M5B 2K3, Canada, dchen@ryerson.ca, http://www.ryerson.ca/~dchen/  2Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China, zyma@imr.ac.cn, http://sourcedb.cas.cn/sourcedb_imr_cas/yw/rck/201308/t20130822_3917033.html  3Department of Chemical and Materials Engineering, University of Alberta, 9211-116 Street, Edmonton, Alberta T6G 1H9, Canada, dongyang@ualberta.ca, https://www.cme.engineering.ualberta.ca/FacultyStaff/FacultyAcademicStaff/Li.aspx	3144
3163	THE MICROSTRUCTURE, MARTENSITIC TRANSFORMATION BEHAVIORS AND MECHANICAL PROPERTIES OF TINIHF COMPOSITE CONTAINING TIB WHISKER AND (TI,HF)2NI PARTICLE	Xiaoyang Yi, Xianglong Meng, Wei Cai, Liancheng Zhao (Harbin Institute of Technology)	3163
3165	Mechanical properties of TiB2-AlFe composite fabricated by the spark plasma sintering	M. Yoshida, H. Shiraishi (National Institute of Technology)	3165
3205	multi-layer graphene reinforced pure titanium matrix composites by a micro-laminated structure design	Xiaonan Mu, Hongnian Cai, Hongmei Zhang, Qunbo Fan, Yan Wu, Ran Shi, Guoju Li, Hu Wang (Beijing Institute of Technology)	3205
3220	AGING BEHAVIOR AND TENSILE PROPERTIES OF CAST AND SQUEEZED 6061-SiC PARTICLES COMPOSITES	F. M. Fairouz, A. Daoud, M. T. Abou El-khair (Central Metallurgical Research and Development Institute (CMRDI))	3220
3241	FABRICATION AND THERMAL CONDUCTIVITY OF CARBON NANOFIBER REINFORCED ALUMINUM MATRIX COMPOSITES BY LOW PRESSURE INFILTRATION CASTING	Fei Gao, Yongbum Choi, Zhefeng Xu, Kazuhiro Matsugi, Kenjiro Sugio, Gen Sasaki (Hiroshima University)	3241
3308	CO-SPRAY FORMING AND TAILORED HEAT TREATMENT OF COMPOSITE TOOL STEELS	Chengsong Cui, Alwin Schulz, Dawid Nadolski (Foundation Institute for Materials Science, Germany)	3308
3339	MECHANICAL PROPERTIES OF TITANIUM METAL MATRIX NANOCOMPOSITES REINFORCED WITH MULTIWALLED CARBON NANOTUBES, GRAPHENE AND NANODIAMONDS PREPARED BY SPARK PLASMA SINTERING	Suli Liu, Faming Zhang, Peipei Zhao, Tengfei Liu, Lili Wang (Southeast University)	3339
3345	Effects of Chromium on tribological properties of Ni3Al under dry sliding	Jin Yunxue, Chen Yanan,Niu Muye (Jiangsu University of Science and Technology)	3345
3403	ON THE STOKES-BRINKMAN COUPLING WITH ANISOTROPIC NAVIER SLIP AND EFFECTIVE VISCOSITY FOR FLOW SIMULATIONS IN DUAL-SCALE FIBROUS POROUS MEDIA	Jingang Lu, Thanh Tinh Tran, Wook Ryo Hwang (Gyeongsang National University)	3403
3440	A promising preparation method for Al7075-B4CAl Layered Composite by continuous casting and hot rolling	Yubo Zhang, Yingshui Yu, Tingju Li (Dalian University of Technology)	3440
3501	PREPARATION AND PROPERTY OF NANO-SICP/A356 COMPOSITES SYNTHESIZED WITH A NEW PROCESS	Du Yuan, Kun Hu, Shulin Lv, Qi Gao, Shusen Wu (Huazhong University of Science and Technology)	3501
3548	Effect of electroplating parameters on microstructure of copper coating on carbon fibers used for fabrication of aluminum matrix composite	Jianjun Sha, Zhaozhao Lv, Jixiang Dai, Zhaofu Zhang (Dalian University of Technology)	3548
3573	CHARACTERIZATION OF HOT PRESSED COPPER-IRON COMPOSITES	Ho Jun Lee, Dill Lamichhane, Jung-Il Lee and Jeong Ho Ryu* Department of Materials Science and Engineering, Korea National University of Transportation, 50 Daehak-ro, Chungju, Chungbuk 27469, South Korea Jeong Ho Ryu*: jhryu@ut.ac.kr	3573
3619	PROCESSING AND MECHANICAL PROPERTIES OF IN-SITU MAGNESIUM MATRIX COMPOSITES CONTAINING NANO-SIZED POLYMER DERIVED SICNO PARTICLES	Nagaraj M Chelliah (Indian Institute of Technology Ropar), Harpreet Singh (Indian Institute of Technology Ropar), M.K. Surappa (Indian Institute of Science)	3619
3652	EFFECT OF REINFORCEMENT SIZE AND REINFORCEMENT OXIDATION ON WEAR BEHAVIOR OF HIGH VOLUME FRACTION SIC/AL MMC	Taegyu Lee (KAIST)	3652
3758	ENERGY DISSIPATION MECHANISM OF CERAMIC MATRIX COMPOSITES DURING THE PROCESS OF DWELL	Gao Jubin (Beijing Aeronautical Science and Technology Research Institute of COMAC), Wang Yangwei (Beijing Institute of Technology), Wang Fuchi (Beijing Institute of Technology), Sun Jianzhuo (Beijing Aeronautical Science and Technology Research Institute of COMAC)	3758
3848	ESTIMATION OF EFFECTIVE THERMAL CONDUCTIVITY OF METAL MATRIX COMPOSITES BY USING IMAGE ANALYSIS	Kenjiro Sugio, Yong-Bum Choi, Gen Sasaki (Hiroshima University)	3848
3912	The Effects of Particles Size and Volume Fraction on Microstructure and Mechanical Properties of In-situ Nano TiB2Al 7050 Composites	Wenchong Yang, Xitao Zheng, Haigang Zhang, Chenxi Lv (Northwestern Polytechnical University)	3912
4234	Microstructural Refinement and Enhancement of Mechanical properties of Al (2014) – SiC Composites by Equal Channel Angular Pressing	A. Suresh Babu (Anna University), M. Jaivignesh (Anna University), S. Dhanalakshmi (DRDO), K. Shanmuga Sundaram (Anna University)	4234
4254	Improving damage tolerance of carbon fibre laminates via bio-inspired micro-structural design	Wenqiang Hu, Zhenying Huang, Hongxiang Zhai, Leping cai, Cong Lei, Yang Zhou (Beijing Jiaotong University)	4254
4256	Characterization of the local deformation behavior of AMC by in situ SEM methods	Schuff, Sebastian; Balle, Frank; Beck, Tilmann; Eifler, Dietmar (University of Kaiserslautern)	4256
4345	THE EFFECT OF INTERFACE LAYER THICKNESS ON THERMAL CONDUCTIVITY OF DIAMOND PARTICLES DISPERSED CR-ALLOYED CU MATRIX COMPOSITES	Jianwei Li, Hailong Zhang, Zifan Che, Yang Zhang, Xitao Wang (University of Science and Technology Beijing)	4345
4347	Understanding and tailoring interfacial bonding states of a diamond-Al composite for thermal management applications-Gang JI	Zhanqiu Tan, Run Xu, Genlian Fan, Ding-Bang Xiong, Zhiqiang Li, Di Zhang (Shanghai Jiao Tong University)	4347
4381	The interfacial microstructure and mechanical behavior of Mg/Mg bimetal composites fabricated by insert molding method	K. N. Zhao, H. X. Li*, L. Z. Zhuang, J. S. Zhang  State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China	4381
4385	The analysis of surface modification of SiCp and interface of SiCp/A390 composites	Aiqin Wang (Henan University of Science and Technology)	4385
4386	Preparation and reaction properties of Ni/Al micro-nano energetic materials	Baotong Tang, Mingzhi Wang, Xinyi Luo, Jie Tao, Sha Liao, Liangsheng Qiu, Jingming Tian (Nanjing University of Aeronautics and Astronautics)	4386
4429	Fabrication of uniform niobium coating layer for the coated fuel particle of the very high temperature reactor	Pengpeng Lv, Chuanlin Fan, Qingshan Zhu (Chinese Academy of Sciences)	4429
4435	Preparation of Pd/TiO2/Al2O3 composite membranes with high H2-permeability	Lei Wei, Jing Gao (Langfang Teachers University)	4435
4450	FABRICATION OF GRAPHENE REINFORCED AL MATRIX COMPOSITES USING FLAKY POWDER METALLURGY METHOD	L. H. Wang, Z.Y. Liu, B.L. Xiao, Z. Y. Ma (Chinese Academy of Sciences)	4450
4454	AN ENHANCED FEM MODEL ON THE DEFORMATION BEHAVIOR OF SIC-ALUMINUM COMPOSITES	Xiang Gao, Xuexi Zhang, Lin Geng (Harbin Institute of Technology)	4454
4475	Recrystallization behavior of in-situ synthesized MgAl2O4 whiskers reinforced 6061 aluminum alloy composites	Geng Hao, Chunsheng Shi, Naiqin Zhao (Tianjin University)	4475
4491	Achieving High Strength and High Ductility in Metal Matrix	Xiang Zhang, Chunsheng Shi, Jiajun Li, Enzuo Liu, Fang He, Liying Ma, Chunnian He, Naiqin Zhao (Tianjin University)	4491
4500	Fullpaper_In-situ Synthesis of Gamma Al2O3Whiskers Reinforced Aluminum Matrix Composite	Xiaoyao Qu, Fucheng Wang, Tianshuai Wang, Chunsheng Shi, Naiqin Zhao (Tianjin University)	4500
4506	DISLOCATION EMISSION RENDERS PLATE-REINFORCED METAL- MATRIX COMPOSITES SUPERIOR TO SPHERICAL AND FIBROUS REINFORCEMENTS	Zhibo Zhang, Herbert M. Urbassek (University Kaiserslautern)	4506
4511	In-Situ Synthesis of Undulated Ni Anchored To Graphene/Al with One-Step Method	Xinghai Liu (Tianjin University), Jiajun Li (Tianjin University), Junwei Sha (Tianjin University), Enzuo Liu (Tianjin University, Collaborative Innovation Center of Chemical Science and Engineering), Qunying Li (Tianjin University), Chunnian He (Tianjin University, Collaborative Innovation Center of Chemical Science and Engineering), Chunsheng Shi (Tianjin University), Naiqin Zhao (Tianjin University, Collaborative Innovation Center of Chemical Science and Engineering)	4511
4564	Effect of SiC particle size on Dynamic recrystallization CRITICAL STRAIN	Hao Shi-ming, Xie Jing-pei, Wang Ai-qin (Henan University of Science and Technology)	4564
4570	Workpiece size effects on residual stress in metal matrix composites after FSW	X.X. Zhang, B.L. Xiao, Z.Y. Ma (Chinese Academy of Sciences)	4570
4607	Dynamic Deformation and Microstructural Response of In situ TiBw/Ti6Al4V Composites	J. Sun (Zhejiang University), H. Wang (Zhejiang University), L.J. Huang (Harbin Institute of Technology), L.Geng (Harbin Institute of Technology), F.X. Qin (Zhejiang University), H.X. Peng (Zhejiang University)	4607
4612	Hot deformation behaviour and microstructural evolution of bimodal size particulates reinforced (TiB+La2O3)/Ti composites	Xianglong Sun, Yuanfei Han, Liqiang Wang, Weijie Lu (Shanghai Jiao Tong University)	4612
4615	Influence of Graphene on Morphologies of Substrate Copper Foils during CVD Process and Fabrication of High Conductivity Graphene-Copper Composite	Mu Cao, Ding-Bang Xiong (Shanghai Jiao Tong University)	4615
4618	Simulation of deformation and damage of SiCp/Al composites under tensile loading	J.F. Zhang, X.X. Zhang, Q.Z. Wang, D. Wang, B.L. Xiao, Z.Y. Ma (Chinese Academy of Sciences)	4618
4674	Microstructure and Mechanical Properties of TiB+TiC reinforced Titanium by ECAP	Yuanfei Han, Juan Xiang, Jiuxiao Li, Jianwei Mao, Liqiang Wang, Weijie Lu (Shanghai Jiao Tong University)	4674
Theme 1 Materials Science
1.4 Track Green Composites
Paper ID	Full Paper Title	Author	Paper ID
2861	OPTIMIZATION STUDIES ON THE SYNTHESIS AND CHARACTERIZATION OF BIO-BASED EPOXIDIZED SOYBEAN OIL (ESBO)	Shatori Meadows, Mahesh Hosur, Alfred Tcherbi-Narteh, Shaik Jeelani (Tuskegee University)	2861
2942	FAILURE MECHANISM OF THE WOOD PLASTIC COMPOSITES	R. Kitamura1, A. Hara2, S. Ogihara3, H. Ito4, S. Ogoe5, A. Nordin6, K. Sakamoto7, H. Balqis8 and K. Goda9  1 2641 Yamazaki, Noda, Chiba 278-8510, Japan, Tokyo university of science, rkitamura@rs.tus.ac.jp 2 2641 Yamazaki, Noda, Chiba 278-8510, Japan, Tokyo university of science, ngc3372ecn@gmail.com 3 2641 Yamazaki, Noda, Chiba 278-8510, Japan, Tokyo university of science, ogihara@rs.noda.tus.ac.jp  4 1370 Nishiyama, Nishi-ku, Hamamatsu, 432-8001, Japan, Toclas Corporation, Hirokazu_Ito@toclas.co.jp 5 1370 Nishiyama, Nishi-ku, Hamamatsu, 432-8001, Japan, Toclas Corporation, Shinji_Ogoe@toclas.co.jp 6 2-16-1 Tokiwadai, Ube, Yamaguchi 755-8611, Japan, Ymaguchi university, mnazmi@utem.edu.my 7 2-16-1 Tokiwadai, Ube, Yamaguchi 755-8611, Japan, Ymaguchi university, w019vd@yamaguchi-u.ac.jp 8 2-16-1 Tokiwadai, Ube, Yamaguchi 755-8611, Japan, Ymaguchi university, v802fb@yamaguchi-u.ac.jp 9 2-16-1 Tokiwadai, Ube, Yamaguchi, 755-8611, Japan, Yamaguchi university, goda@yamaguchi-u.ac.jp	2942
2953	EFFECT OF PHOSPHORUS-BASED COMPOUNDS ON THE FLAME RETARDANCY AND MECHACNICAL PROPERTIES	Tao Yu1, Tuerdi Tuerhongjiang2, Cong Sheng3 and Yan Li4 1 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China, yutao@tongji.edu.cn 2 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China, opik419@qq.com 3 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China, 824171034@qq.com 4 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China, liyan@tongji.edu.cn	2953
3176	EFFECT OF FUNGI ON THE PROPERTIES OF JUTE/POLY (LACTIC ACID) COMPOSITES	Ding Ding,Tao Yu, Yan Li (Tongji University)	3176
3245	IN-SITU PREPARATION OF ANTISTATIC NATURAL RUBBER	Dongning He (University of Southern Queensland, Chinese Academy of Tropical Agricultural Sciences), Jinlong Tao (Chinese Academy of Tropical Agricultural Sciences), Yueqiong Wang (Chinese Academy of Tropical Agricultural Sciences), Wei Gong (Chinese Academy of Tropical Agricultural Sciences) Yongyue Luo (Chinese Academy of Tropical Agricultural Sciences), Zheng Peng (Chinese Academy of Tropical Agricultural Sciences), Hao Wang (University of Southern Queensland)	3245
3269	Thermal Degradation and Fire Reaction Properties of Mycelium Composites	M. Jones (RMIT University), T. Bhat (University of New South Wales), C.H. Wang (University of New South Wales), K. Moinuddin (Victoria University), S. John (RMIT University)	3269
3296	MARBLE BASED GREEN CEMENT BY USING GEOPOLYMER TECHNOLOGY	W.H. Lee, T.W. Cheng, Y.C. Ding, T.T. Wang (National Taipei University of Technology)	3296
3451	RECYCLING OF END-OF-LIFE TEXTILE MATERIALS BY FABRICATION OF GREEN COMPOSITES	Behnaz Baghaei, Mikael Skrifvars (University of Borås)	3451
3476	Homogeneous and toughened cellulose epoxy composites	Xinying Deng (Imperial College London, Singapore Institute of Manufacturing Technology), Anthony J. Kinloch (Imperial College London), Soraia Pimenta (Imperial College London), Gregory T. Schuenman (USDA Forest Service), Stephan Sprenger (Evonik Hanse GmbH), Ambrose C. Taylor (Imperial College London), Wern Sze Teo (Singapore Institute of Manufacturing Technology)	3476
3487	Allocation in LCA of flax fibres for the reinforcement of composites	John Summerscales (Plymouth University)	3487
3687	PROCESSING AND CHARACTERIZATION OF GREEN COMPOSITES WITH CHOPPED KENAF FIBERS AND RECYCLED EXPANDED POLYPROPYLENE	Donghwan Cho (Kumoh National Institute of Technology), Jeonghoon Kim (Kumoh National Institute of Technology), Oh Hyeong Kwon (Kumoh National Institute of Technology), Won Ho Park (Chungnam National University)	3687
3546	THE ACOUSTIC AND IMPACT RESPONSE OF SANDWICH STRUCTURES BASED ON NATURAL FIBER REINFORCED SKINS AND BALSA WOOD	Y.O. Shen1, B. Jiang2, J.C. Zhang3 and Y. Li4  1 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P R China, syoeva@tongji.edu.cn 2 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P R China, 570469077@qq.com 3 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P R China, 1259229286@qq.com 4 School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P R China, liyan@tongji.edu.cn	3546
3687	PROCESSING AND CHARACTERIZATION OF GREEN COMPOSITES WITH CHOPPED KENAF FIBERS AND RECYCLED EXPANDED POLYPROPYLENE	Donghwan Cho (Kumoh National Institute of Technology), Jeonghoon Kim (Kumoh National Institute of Technology), Oh Hyeong Kwon (Kumoh National Institute of Technology), Won Ho Park (Chungnam National University)	3687
3735	Determination of the poly(lactic acid) crystallization through a synergistic approach, containing a biobased carbon nucleant	Michael Snowdon, Amar Mohanty, Manju Misra (University of Guelph)	3735
3748	Flammability of Natural Fibre-Reinforced Polymeric Composites	Debes Bhattacharyya, Nam Kyeun Kim (University of Auckland)	3748
3812	Is Hierarchy Useful in Natural Fibre Composites?	Marta Fortea-Verdejo (University of Vienna), Elias Bumbaris (University of Vienna), Alexis Tonneau (University of Vienna), Koon-Yang Lee (Imperial College London), Alexander Bismarck (University of Vienna, Imperial College London)	3812
3849	The effect of bamboo microstructure on the mechanical properties of bamboo fibre reinforced composites	D. E.C. Depuydt, Nick Sweygers,  Lise Appels, Jan Ivens, Aart W. van Vuure (KU Leuven)	3849
3967	FLEXURAL BEHAVIOUR OF A BIO-BASED SANDWICH STRUCTURE MANUFACTURED BY LIQUID RESIN INFUSION	Arthur Monti (Université du Maine), Abderrahim El Mahi (Université du Maine), Zouhaier Jendli (Ecole Supérieure des Techniques Aéronautiques et de Construction Automobile), Laurent Guillaumat (École nationale supérieure d'arts et métiers)	3967
4089	Improving interfacial and mechanical properties of T800 carbon fiber reinforced itaconic acid-based epoxy resin  composites by introducing cellulose nanomaterials onto the surface of fibers	Lu kangyi a, Tian Junpeng a,, Li Jingxuan a, Deng Quan a, Yu Yunhua a*, Liu Xiaoqing b*, Yang Xiaoping a a State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China b Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, P.R. China	4089
4112	Size Effect of Oil Palm Fibers on Tensile Properties of Oil Palm Fiber-Reinforced Polypropylene Composites	A. Nordin1, K. Sakamoto2, H. Azhari2, K. Goda1, M. Okamoto3, H. Ito4, T. Endo4 1 Graduate School of Science and Technology for Innovation, Yamaguchi University, Japan 2 Department of Mechanical Engineering, Yamaguchi University, Japan 3 Technology Develop Center, TOCLAS Co., Japan 4 Research Institute for Sustainable Chemistry, AIST, Japan	4112
4130	The High Performance Discontinuous Fibre (HiPerDiF) Method for Carbon-Flax Hybrid Composites Manufacturing	Marco L. Longana, HaNa Yu, Kevin D. Potter (University of Bristol)	4130
4303	A study on the influence of processing parameters on damping, elastic and ultimate properties of commingled flax-polypropylene composites	Karthik Ram Ramakrishnan (Ecole des mines d'Alès), Stéphane Corn (Ecole des mines d'Alès), Nicolas Le Moigne (Ecole des mines d'Alès), Olivier De Almeida (Institut Clement Ader)	4303
4360	Encapsulation of chitosan as an efficient flame retardant for Thermoplastic starch	M. N. Prabhakar, Gibeop Nam, Syed Nabeel Ahmed, Salman Khalid, Muhammad Latif, Jung-Il Song (Changwon National University)	4360
4384	EFFECTS OF CELLULOSE NANOCRYSTALS ON THE INTERFACIAL PROPERITES OF SISAL FIBERS/EPOXY COMPOSITES	Zhongsen Zhang, Yan Li (Tongji University)	4384
4425	MECHANICAL PROPERTIES CHARACTERIZATIONS OF GREEN COMPOSITES MADE FROM POLY (LACTIC ACID) AND VARIOUS MILLED FIBERS WITH A MELT MIXING EXTRUDER FOR ADDITIVE MANUFACTURING APPLICATIONS	Yuan Wang, Naoya Kobayashi, Daisuke Higurashi, Keigo Ishizuka, Kohji Suzuki, Masahiro Hosoya (Chiba Institute of Technology)	4425
4493	Biocomposites from Hemp Fibers and Acrylated Epoxidized Soybean Oil-based Reins	Wendi Liu, Ming-en Fei, Renhui Qiu (Fujian Agriculture and Forestry University)	4493
4499	IMPROVEMENT OF MECHANICAL PERFORMANCES OF CARBON FIBER/EPOXY COMPOSITES BY INCORPORATING NATURAL NANO MATERIALS	Gibeop Nam, Chang-uk Kim, M. N. Prabhakar, Song Jung-il (Changwon National University)	4499
4578	A STUDY ON NORMALIZATION OF THE MECHANICAL PROPERTIES OF JUTE/GLASS HYBRID COMPOSITES	Dong-Woo Lee (Changwon National University), Byung-Jin Park (Changwon National University), Byoun-Sun Kim (Korea Institute of Materials Science), Jung-Il Song (Changwon National University)	4578
4575	Size Effect of Oil Palm Fibers on Tensile Properties of Oil Palm Fiber-Reinforced Polypropylene Composites	A. Nordin (Yamaguchi University), K. Sakamoto (Yamaguchi University), H. Azhari (Yamaguchi University), K. Goda (Yamaguchi University), M. Okamoto (Technology Develop Center, TOCLAS Co.), H. Ito (Technology Develop Center, TOCLAS Co.), T. Endo (Research Institute for Sustainable Chemistry)	4575
Theme 1 Materials Science
1.5 Track Bio-Composites
Paper ID	Full Paper Title	Author	Paper ID
2817	Eggshell-silver nanoparticles reinforcement polymer films and applications	Boniface J. Tiimob, Shaik Jeelani, Vijaya K. Rangari. (Tuskegee University)	2817
2861	OPTIMIZATION STUDIES ON THE SYNTHESIS AND CHARACTERIZATION OF BIO-BASED EPOXIDIZED SOYBEAN OIL (ESBO)	Shatori S. Meadows1, Mahesh V. Hosur2, Alfred Tcherbi-Narteh3, and Shaik Jeelani4  1 Department of Materials Science and Engineering, Tuskegee University, smeadows0183@mytu.tuskegee.edu 2 Department of Materials Science and Engineering, Tuskegee University,    hosur@mytu.tuskegee.edu 3 Department of Materials Science and Engineering, Tuskegee University,                                 atcherbi-narteh@mytu.tuskegee.edu 4 Department of Materials Science and Engineering, Tuskegee University,                                   jeelanis@mytu.tuskegee.edu	2861
2938	LISTEN TO THE WATER CONCERTO DURING THE FRACTURE PROCESS OF CELLULAR FIBROUS BAMBOO	Guowei Chen, Hongyun Luo (Beijing University of Aeronautics and Astronautics)	2938
2941	EXTRACTION OF CELLULOSE AND LIGNIN FROM BIOMASS AND THEIR USE IN REINFORCING POLYMERS AND SYNTHESIS OF PHENOLIC RESINS	Mahesh Hosur, Md. Nuruddin, Dereca Hubbard, Alfred Tcherbi-Narteh, Shaik Jeelani (Tuskegee University)	2941
2961	Preparation and Characterization of Nanocellulose/SA sponge for Hemostasis	Feng Cheng, Xinjing We, Tingsheng Yan, Jinmei He (Harbin Institute of Technology)	2961
3055	Novel Bioresorbable Textile Composites for Medical Applications	Chenkai Zhu (The University of Nottingham Ningbo China), Ifty Ahmed (University of Nottingham), Andy Parsons (University of Nottingham), Yunqi Wang (The University of Nottingham Ningbo China), Chao Tan (The University of Nottingham Ningbo China), Jingsong Liu (Sinoma Co., Ltd.), Chris Rudd (The University of Nottingham Ningbo China), Xiaoling Liu (The University of Nottingham Ningbo China)	3055
3091	Moisture Stability and Mechanical Durability of Peat Biocomposites	Maiju Hietala (University of Oulu), Elisa Koivuranta (University of Oulu), Ari Ämmälä (University of Oulu), Kristiina Oksman (University of Oulu, Luleå University of Technology), Mirja Illikainen (University of Oulu)	3091
3110	Regenerative and bio-based materials for sheet molding compounds (SMC)	Florian Gortner, Peter Mitschang (Institute for Composite Materials)	3110
3209	INVESTIGATING THE USE OF CHITOSAN AS A COUPLING AGENT TO IMPROVE THE INTERFACIAL PROPERTIES OF PHOSPHATE GLASS FIBRE/POLYCAPROLACTONE COMPOSITES	Chao Tan1, Ifty Ahmed2, Andrew J. Parsons2, Chenkai Zhu1, Junxiao Zhang1, Chris D. Rudd1, 2 and Xiaoling Liu1* 1 The University of Nottingham Ningbo China, Ningbo, 315100, China  2 The University of Nottingham, Nottingham, NG7 2RD, U.K. * Corresponding author at Science and Engineering Building, the University of Nottingham Ningbo China, Ningbo, 315100, China. Tel: +86 (0)574 8818 0000 (Ext 8057), Email: Xiaoling.Liu@nottingham.edu.cn	3209
3211	NANOCELLULOSE REINFORCED BIO-POLYURETHANE FOAMS AS CORE IN SANDWICH COMPOSITE PANELS	Nikolina Frisk, Mohini Sain, Kristiina Oksman (Luleå University of Technology, Forestry University of Toronto)	3211
3269	THERMAL DEGRADATION AND FIRE REACTION PROPERTIES OF MYCELIUM COMPOSITES	Mitchell Jones1, Tanmay Bhat2, Chun H. Wang2, Khalid Moinuddin3 and Sabu John1  1 School of Engineering, RMIT University, Melbourne, Australia 2 School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, Australia 3 Centre for Environmental Safety and Risk Engineering (CESARE), Victoria University, Melbourne, Australia	3269
3287	EFFECT OF TWIST ON STRESS RECOVERY LENGTH FOR SINGLE YARN NATURAL FIBER COMPOSITES	Takashi Yoshimura, Takahiro Shimizu, Junji Noda, Koichi Goda (Yamaguchi University)	3287
3321	A multiscale stochastic approach for the study of the nonlinear tensile behaviour of plant fibre composites	A. Del Masto, F. Trivaudey, V. Guicheret-Retel,V. Placet, L. Boubakar (Femto-ST Institute)	3321
3451	RECYCLING OF END-OF-LIFE TEXTILE MATERIALS BY FABRICATION OF GREEN COMPOSITES	B. Baghaei1, R. Temmink1 and M. Skrifvars1  1 Swedish Centre for Resource Recovery, Faculty of Textiles, Engineering and Business University of Borås, behnaz.baghaei@hb.se and www.hb.se  robin.temmink@gmail.com  mikael.skrifvars@hb.se	3451
3492	NUMERICAL INTERPRETATION OF FULLY BIO-RESORBABLE GLASS FIBRE REINFORCED COMPOSITES	Xi Gao (University of Nottingham)	3492
3505	Effect of cellulose nanofiber (CeNF) and dispersing agent on scratch resistance and transparency of poly(vinyl alcohol) (PVA)/CeNF composites	Shigeji Konagaya (Nagoya Industrial Science Research Institute)	3505
3630	Design and development of 100% bio-based high-grade hemp/epoxy composites	Camille François (University of Burgundy-Franche-Comté), Vincent Placet (University of Burgundy-Franche-Comté), Laurent Plasseraud (University of Burgundy-Franche-Comté), Sylvie Pourchet (University of Burgundy-Franche-Comté), Pierre Ouagne (Laboratoire Génie de Production (LGP)), Joseph Samec (Stockholm University), Sari Rautiainen (Stockholm University), Yves Gaillard (University of Burgundy-Franche-Comté), Gilles Boni (University of Burgundy-Franche-Comté), Stéphane Fontaine (University of Burgundy-Franche-Comté), Lucie Fournier (Institut de Recherche de Chimie Paris (IRCP)), Carine Robert (Institut de Recherche de Chimie Paris (IRCP)), Christophe M. Thomas (Institut de Recherche de Chimie Paris (IRCP))	3630
3632	Mechanical properties, visual aspect, microstructure and life cycle assessment approach (LCA) focused on PP/wood flour biocomposites	Célia Badji, Lata Soccalingame, Jean-Charles Bénézet, Hélène Garay, Joana Beigbeder, Didier Perrin, Valérie Desauziers, Anne Bergeret (Ecole des Mines d’Alès)	3632
3640	Grafting polyethylene glycol on nanocellulose toward biodegradable polymer nanocomposites	Shiyu Geng, Maria Harila, Kun Yao, Qi Zhou, Kristiina Oksman (Luleå University of Technology)	3640
3656	A NOVEL COMPOSITE MATERIAL WITH FLAME RETARDANT AND ANTIBACTERIAL PROPERTIES IN INTERIOR SYSTEM	Jianbo Sun, Qian Liu, Yi Zhang, Dongbing Geng, Baogang Sun, Kai Yi, Zhiyong Yang (Aerospace Research Institute of Materials and Processing Technology)	3656
3737	Sustainable lightweight biocomposites from toughened polypropylene and biocarbon for automotive applications	Ehsan Behazin, Amar Mohanty, Manju Misra (University of Guelph)	3737
3751	ALL-CELLULOSE COMPOSITES BASED ON WET-SPUN CELLULOSE FIBERS REINFORCED WITH CELLULOSE NANOCRYSTALS AND HALLOYSITE NANOCLAY	Andrés García Vogel (Luleå University of Technology, University of Oulu), Saleh Hooshmand (Luleå University of Technology), Petteri Piltonen (University of Oulu), Kristiina Oksman (Luleå University of Technology, University of Oulu)	3751
3847	THERMO-SENSITIVE HYDROGEL COMPOSITE FOR CONTROLLED DELIVERY OF DRUGS WITH FUNCTIONALIZED CARBON NANOTUBES	Wen Qin, Jianqiang Liu, Jing Ma, Xi Nan, Weihui Zhu, Bin Tang (Taiyuan University of Technology)	3847
3849	THE EFFECT OF BAMBOO MICROSTRUCTURE ON THE MECHANICAL PROPERTIES OF BAMBOO FIBRE REINFORCED COMPOSITES	Delphine E.C. Depuydt1, Nick Sweygers2,  Lise Appels2, Jan Ivens1, Aart W. van Vuure1  1Department of Materials Engineering, KU Leuven, Kasteelpark Arenberg 44 bus 2450, 3001 Leuven, Belgium, delphine.depuydt@kuleuven.be, jan.ivens@kuleuven.be, aartwillem.vanvuure@kuleuven.be, http://www.composites-kuleuven.be  2Department of Chemical Engineering; Process and Environmental Technology Lab, KU Leuven, Jan Pieter de Nayerlaan 5, 2860 Sint-Katelijne-Waver, Belgium, nick.sweygers@kuleuven.be, lise.appels@kuleuven.be, https://iiw.kuleuven.be/onderzoek/petlab/people	3849
3937	PREPARATION AND PROPERTIES OF JUTE / POLY(LACTIC ACID) / ACETYLATED KRAFT LIGNIN BASED THERMOPLASTIC POLYURETHANE BIOCOMPOSITES	Jongshin Park, Hyun-gyoo Roh (Seoul National University)	3937
4089	Improving interfacial and mechanical properties of T800 carbon fiber reinforced itaconic acid-based epoxy resin (EIA) composites by introducing cellulose nanomaterials onto the surface of fibers	Lu kangyi (Beijing University of Chemical Technology), Tian Junpeng (Chinese Academy of Sciences), Li Jingxuan, Deng Quan (Beijing University of Chemical Technology), Yu Yunhua (Beijing University of Chemical Technology), Liu Xiaoqing  (Chinese Academy of Sciences), Yang Xiaoping (Beijing University of Chemical Technology)	4089
4464	Photonic crystal&Electrochromic functional composite materials inspired by nature	Xiaoyi Chen, Hangchuan Zhang, Jiupeng Zhao, Na Li, Yao Li (Harbin Institute of Technology)	4464
4493	BIOCOMPOSITES FROM HEMP FIBERS AND ACRYLATED EPOXIDIZED SOYBEAN OIL-BASED RESINS	Wendi Liu, Ming-en Fei and Renhui Qiu* College of Transportation and Civil Engineering, Fujian Agriculture and Forestry University, Fuzhou, 350002, P. R. China. E-mail address: renhuiqiu@fafu.edu.cn	4493
4518	TOUGNENING MECHANISMS IN A NATURAL COMPOSITE: A CROSSED-LAMELLAR STRUCTURE	H.M. Ji (Ryerson University,Northeastern University), X.W. Li (Northeastern University), D.L. Chen (Ryerson University)	4518
4596	Biodegradation Performance of Magnesium Matrix Composite as a Biomedical Implant	Kun Yu (Central South University, Yantai Nanshan University), Tao Zhang (Yantai Nanshan University), Fang Hongjie (Yantai Nanshan University), Yilong Dai (Central South University, Yantai Nanshan University), Yang Yan (Central South University), Liangjian Chen (Central South University)	4596
4601	Toughening mechanisms in a natural composite: a crossed-lamellar structure	H.M. Ji (Northeastern University, Ryerson University), X.W. Li (Northeastern University), D.L. Chen (Ryerson University)	4601
4632	DESIGN OF BIO-INSPIRED MINIATURE BOAT AND ITS CONTROLLED MOVEMENT AT OIL/WATER INTERFACE	Ying Chu, Qinmin Pan (Harbin Institute of Technology)	4632
Theme 1 Materials Science
1.6 Track Nano-Composites
Paper ID	Full Paper Title	Author	Paper ID
2949	FABRICATION OF FERRIC OXIDE /CARBON BLACK/CARBON NANOTUBE COMPOSITES FOR PROMTED ELECTROMAGNETIC MICROWAVE PERFORMANCE	Junyao Shen, Yongtao Yao, Jinsong Leng, Yanju liu (Harbin Institute of Technology (HIT))	2949
2953	EFFECT OF PHOSPHORUS-BASED COMPOUNDS ON THE FLAME RETARDANCY AND MECHACNICAL PROPERTIES	Tao Yu, Changqing Hu, Fei Sun, Yan Li (Tongji University)	2953
2774	Synthesis, Characterization, and Microwave Absorption Properties of Bi1-xZnxFeO3 Nanoparticles	Song Bi1*, Jun Li1, Xunjia Su1, Genliang Hou1, Bing Mei1, Hao Li1 (1 Xi’an Research Institute of High-Tech, Xi’an, 710025, China)	2774
2797	Fabrication Processes and Properties of Carbon Nanomaterials Filled Nanocomposites	Soon Hyung Hong Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, Korea E-mail: shhong@kaist.ac.kr Tel: 82-42-350-3327	2797
2798	PRESSURE SENSITIVE ADHESIVE COMPOSITES USING SURFACE MODIFIED GRAPHENE OXIDE	Sung-Ryong Kim*, Minh-Canh Vu, Young-Han Bae and Min-Ji Yu   *Department of Polymer Science and Engineering, Korea National University of Transportation, Chungju 27469, Republic of Korea, srkim@ut.ac.kr, http://pml.ut.ac.kr	2798
2814	CHARACTERIZING BIAXIALLY STRETCHED  POLYPROPYLENE/GRAPHENE NANOPLATELET COMPOSITES	B. Mayoral1, E. Harkin-Jones2, N. Khanam3, M.A. AlMaadeed3,4, M. Ouederni5, A. Hamilton1, D. Sun1*  1School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast BT9 5AH, United Kingdom. Email: bemayorla@hotmail.com   2School of Engineering, University of Ulster, Jordanstown, Antrim BT37 0QB, United Kingdom. Email: e.harkin-jones@ulster.ac.uk  3Center for Advanced Materials, Qatar University, 2713 Doha, Qatar. Email: noor.pathan@qu.edu.qa  4Materials Science and Technology Program, Qatar University, 2713 Doha, Qatar. Email: m.alali@qu.edu.qa  5Qatar Petrochemical Company, Doha, Qatar. Email: MOuederni@qapco.com.qa	2814
2817	Eggshell-silver nanoparticles reinforcement polymer films and applications	Boniface J. Tiimob,   Vijaya K. Rangari*   and Shaik Jeelani,  †Department of Materials Science and Engineering, College of engineering, Tuskegee University, Tuskegee, AL 36088, United States	2817
2870	FABRICATION OF FERRIC OXIDE /CARBON BLACK/CARBON NANOTUBE COMPOSITES FOR PROMTED ELECTROMAGNETIC MICROWAVE PERFORMANCE	Junyao Shen1, Yongtao Yao1, Jinsong Leng1 and Yanju liu2, *  1 Center for Composite Materials and Structures, Harbin Institute of Technology (HIT), Harbin 150080, P. R. China. 2 Department of Astronautical Science and Mechanics, Harbin Institute of Technology (HIT), Harbin 150001, P. R. China. *Corresponding author. Tel: +86-451-86402328; fax: +86-451-86402328. E-mail address: yj_liu@hit.edu.cn (Prof. Yanju Liu)	2870
2894	Polyethylene glycol600-assisted solvothermal synthesis of nano-LiFePO4/C cathode materials for lithium-ion batteries	Huihui Chen, Juan Wang, Liangliang Wang (Xi'an University of Architecture and Technology)	2894
2897	Effects of graphene mass fraction and aspect ratio on elastic properties of graphene-based composites	Zhenmeng Xia, Changguo Wang, Huifeng Tan (Harbin Institute of Technology)	2897
2932	Water permeation through graphene nanoslit by molecular dynamics simulation	T. Yamada, R. Matsuzaki (Tokyo University of Science)	2932
3019	The strength of graphene and its application in nanocomposites	Xin Zhao, Robert J. Young (University of Manchester)	3019
3069	BORON NITRIDE NANOSHEET (BNNS) FILLED PMMA NANOFIBERS AS FILLER FOR COMPOSITES	A. Tuğrul Seyhan  Faculy of Engineering, Materials Science and Engineering Anadolu University Eskişehir TR-26480,        Turkey Email: atseyhan@anadolu.edu.tr, www.anadolu.edu.tr	3069
3067	SPREADING DYNAMICS OF PP, PVDF, AND MAPP ON GLASS SUBSTRATES	Chi Zhang (KU Leuven), Adri C. T. van Duin (Pennsylvania State University), Jin Won Seo (KU Leuven), David Seveno (KU Leuven)	3067
3075	RELAXATION-INDUCED PIEZORESISTIVITY IN CARBON-BASED MONOFILAMENT HIERARCHICAL POLYMER COMPOSITES	Can-Ortiz (Centro de Investigación Científica de Yucatán A.C.), F. Avilés (Centro de Investigación Científica de Yucatán A.C.), J. L. Abot (The Catholic University of America)	3075
3076	POROUS PDMSCNFS COMPOSITES FOR STRETCHABLE STRAIN SENSORS	Shuying Wu (University of New South Wales), Anil R. Ravindran (RMIT University), Raj B. Ladani (RMIT University), Adrian P. Mouritz (RMIT University), Chun H. Wang (University of New South Wales)	3076
3079	FAST EXFOLIATION AND FUNCTIONALISATION OF 2D CARBON NITRIDE BY FRAMEWORK CHARGING	Jingjing Jia (Imperial College London), Edward R. White (Imperial College London), Adam J. Clancy (Imperial College London), Theo Suter (University College London), Thomas S. Miller (University College London), Paul F. McMillan (University College London), Veronika Brázdová (University College London), Furio Corà (University College London),  Chris A. Howard (University College London), Cecilia Mattevi (Imperial College London), Milo S. P. Shaffer (Imperial College London)	3079
3080	EFFECT OF CARBON NANOTUBE ALIGNMENT AND LENGTH ON THE ELECTRICAL CONDUCTIVITY AND PIEZORESISTIVITY OF CNT/PMMA COMPOSITES	A.I. Oliva-Avilés (Universidad Anáhuac Mayab), J. Cob (Centro de Investigación y de Estudios Avanzados), G. Ventura (Centro de Investigación Científica de Yucatán A.C.), A. May-Pat (Centro de Investigación Científica de Yucatán A.C.), A.I. Oliva (Centro de Investigación y de Estudios Avanzados), F. Avilés (Centro de Investigación Científica de Yucatán A.C.)	3080
3108	THERMAL CONDUCTIVITY AND IMPACT PERFORMANCE OF GRAPHENE/EPOXY NANOCOMPOSITES	Hsien-Kuang Liu, Wei-I Chien (Feng Chia University)	3108
3131	Friction and wear properties of carbon nanotube/alumina composites under water lubricated conditions	Keiichi Shirasu, Takuto Miyaura, Go Yamamoto, Toshiyuki Hashida (Tohoku University)	3131
3144	Hot deformation and processing map of a CNT-reinforced aluminum composite	F. Mokdad, D.L. Chen (Ryerson University); Z.Y. Liu, D.R. Ni, B.L. Xiao, Z.Y. Ma (Chinese Academy of Sciences)	3144
3222	Revealing the Effect of Crumpling on the Reinforcement Efficiency of Graphene in Composites	Zheling Li, Dimitrios G. Papageorgiou, Robert J. Young (University of Manchester)	3222
3233	PREPARATION AND PROPERTIES OF ALIGNED MWCNT-REINFORCED THERMOPLASTIC POLYIMIDE COMPOSITES	T.H. Nam (Japan Aerospace Exploration Agency), K. Goto (Japan Aerospace Exploration Agency), Y. Shimamura (Shizuoka University), Y. Inoue (Shizuoka University), S. Kobayashi (Tokyo Metropolitan University), S. Ogihara (Tokyo University of Science)	3233
3326	Growth model of a carbon based 3D structure (Aerographite) and electrical/mechanical properties of composites	J. Marx (Hamburg University of Technology), S. Garlof (Hamburg University of Technology), J. Timmermann (Hamburg University of Technology), D. Smazna (University of Kiel), R. Adelung (University of Kiel), K. Schulte (Hamburg University of Technology), B. Fiedler (Hamburg University of Technology)	3326
3349	Ultralight Graphene Composite Sandwich for Stretchable Light-Emitting Display	Zhenyu Wang, Ne Myo Han, Xu Liu, Ying Wu, Xi Shen, Qingbin Zheng, Jang-Kyo Kim (The Hong Kong University of Science and Technology)	3349
3369	TUNABLE POLY(URETHANE-UREA) BASED ALIGNED CARBON-NANOTUBE POLYMER NANOCOMPOSITES	Jeffrey Gair (U.S. Army Research Laboratory), Dale Lidston (Massachusetts Institute of Technology), Daniel Cole (U.S. Army Research Laboratory), Brian Wardle (Massachusetts Institute of Technology)	3369
3394	Multiscale Modeling of Carbon Fiber/Carbon Nanotube/Epoxy Hybrid Composites	Matthew S. Radue, Gregory M. Odegard (Michigan Technological University)	3394
3434	Effects of Graphene Sheet Size on Electrical Conductivity and Percolation of Graphene Aerogel/Epoxy Composites	Ne Myo Han, Zhenyu Wang, Xi Shen, Ying Wu, Xu Liu, Qingbin Zheng, Jang-Kyo Kim (The Hong Kong University of Science and Technology)	3434
3454	ENHANCED FRACTURE TOUGHNESS OF EPOXY COMPOSITES WITH IRON OXIDE NANORODS	Yu-Ting Li (Guilin University of Electronic Technology), Chuan-Guo Ma (Guilin University of Electronic Technology, Guangxi Key Laboratory of Information Materials), Qi-Ju Ou (Guilin University of Electronic Technology), Hua-Mei Wan (Guilin University of Electronic Technology), Shuai Wang (Guilin University of Electronic Technology), Pei-Bang Dai (Guilin University of Electronic Technology, Guangxi Key Laboratory of Information Materials)	3454
3497	REINFORCEMENT ON EPOXY-BASED COMPOSITES BY DOPAMINE-COATED GRAPHENE PREPARED THROUGH HIGH ENERGY BALL-MILLING	Runting Wang, Shujie Ren, Rongrong Xie, Wengang Yang, Xiaolong Jia*, Xiaoping Yang  State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China  Email: jiaxl@mail.buct.edu.cn	3497
3498	Reinforcing Effect of Magnetically Aligned Multi Walled Carbon Nanotube on Epoxy-based Composites	Wenqiao Zhang, Rongrong Xie, Yang Cao, Xiaolong Jia, Qing Cai, Xiaoping Yang (Beijing University of Chemical Technology)	3498
3509	Improving the mechanical, thermo-mechanical properties and thermal conductivity of carbon fiber/epoxy laminates by incorporating halloysite/carbon nanocomposites	Xueping Wu (Hefei university of technology)	3509
3521	Interlaminar Reinforcement of Carbon Fiber Composites Using Aligned Carbon Nanotubes	Xinchen Ni (Massachusetts Institute of Technology), Estelle Cohen (Massachusetts Institute of Technology), Carolina Furtado (University of Porto), Reed Kopp (Massachusetts Institute of Technology), Nathan Fritz (Massachusetts Institute of Technology), Albertino Arteiro (University of Porto), Gabriel Valdes (Massachusetts Institute of Technology), Travis Hank (Massachusetts Institute of Technology), Gregor Bostnar (University of Southampton), M.N. Mavrogadro (University of Southampton), S.M. Spearing (Massachusetts Institute of Technology), Pedro P. Camanho (University of Porto), Brian L. Wardle (Massachusetts Institute of Technology)	3521
3527	Similarities and differences of epoxy resin nanocomposites with CNTs and BNNTs	Jingwen Guan, Yadienka Martinez-Rubi, Behnam Ashrafi, Michael .B. Jakubinek, Keun Su Kim, Kurtis Laqua, Meysam Rahmat, Steven Walker, Dean Ruth, Mark Plunket, Christopher T. Kingston, Benoit Simard (National Research Council Canada)	3527
3532	ENHANCED THERMAL CONDUCTIVITY OF EPOXY BASED COMPOSITES WITH SELF-ASSEMBLED GRAPHENE-PA HYBRIDS	D. Wu, G. Li, X.P. Yang (Beijing University of Chemical Technology)	3532
3543	Multifunctional Polyurethane-enhanced Buckypaper Sheets based on Carbon Nanotubes and Boron Nitride Nanotubes	B. Ashrafi, Y. Martinez-Rubi, M.B. Jakubinek, K. Laqua, D. Park, S. Zou, K.S. Kim, A. Yousefpour, B. Simard (National Research Council Canada)	3543
3549	STUDY OF MWCNTS FILLED TOUGHENED EPOXY FOR ANCHORING COMPOSITE TENSILE ARMOURS INSIDE THE END FITTING OF FLEXIBLE RISER	Rafael P. Mattedi1, Anh-Tuan Do2, Fernando L. Bastian3, Delong He4, Jinbo Bai5  1, 2 Innovation & Technology Center, 43-45 Boulevard Franklin Roosevelt - 92500 - Rueil Malmaison, France; Technip France S/A, 1rafael.mattedi@technipfmc.com, 2anh-tuan.do@technipfmc.com www.technipfmc.com  3 Programa de Engenharia Metalúrgica e de Materiais, COPPE, CT - Bloco F Sala F-214 Ilha do Fundão – Rio de Janeiro, RJ, 21941-972, Brasil; Universidade Federal do Rio de Janeiro; flbastian@metalmat.ufrj.br, www.metalmat.ufrj.br  4, 5 Ecole Centrale Paris, Laboratoire MSSMat, CNRS UMR8579, Grande Voie des Vignes 92290 Chatenay-Malabry, France ; Université Paris Saclay, 4delong.he@centralesupelec.fr, 5jinbo.bai@centralesupelec.fr, www.mssmat.ecp.fr	3549
3551	INFLUENCE OF CARBON NANOPARTICLE GEOMETRY IN EPOXY MATRIX ON MECHANICAL PROPERTIES AND FAILURE INITIATION REGARDING THE SIZE EFFECT	Christian Leopold (Hamburg University of Technology), Till Augustin (Hamburg University of Technology), Thomas Schwebler (Hamburg University of Technology), Wilfried V. Liebig (Karlsruhe Institute of Technology (KIT)), Hans Wittich (Hamburg University of Technology), Bodo Fiedler (Hamburg University of Technology)	3551
3559	THE MECHANICS OF REINFORCEMENT IN POLYMER-BASED NANOCOMPOSITES	Robert J. Young, Ian A. Kinloch, Suhao Li, Dimitrios G. Papageorgiou (The University of Manchester)	3559
3575	ECO-FREINDLY PREPARATION AND CHARACTERIZATION OF CARBON NANOTUBES-FILLED CARBOXYMETHYL CELLULOSE NANOCOMPOSITE FILMS	Yeong-Rae Son, Hyo In Lee, Yifan Zhang, Soo-Jin Park (Inha University)	3575
3613	Structure and properties of lignin based carbon nanofibers	Lixin Song (University of British Columbia, Zhejiang Sci–Tech University), Addie Bahi (University of British Columbia), Li-Ting Lin (University of British Columbia), Lynn (Yuqin) Wan (University of British Columbia), Angela Dodd (University of British Columbia), Suzana K. S. Strauss (University of British Columbia), Frank K. Ko (University of British Columbia)	3613
3622	MULTISCALE STUDY ON LOAD TRANSFER OF EPOXY NANOCOMPOSITES	Byungjo Kim, Joonmmyung Choi, Hyunseong Shin, Maenghyo Cho (Seoul National University)	3622
3636	Magnetic and Microwave Properties of Doped Graphene Absorbents	Le Quan, Faxiang Qin*, Huan Wang, Hua-Xin Peng Institute for Composites Science Innovation（InCSI）, School of Materials Science and Engineering, Zhejiang University, Zheda Road, Hangzhou, 310027, PR. China	3636
3662	AMINO FUNCTIONALISATION OF CARBON NANOTUBE WEBS FOR ACHIEVING HIGH STRUCTURAL PERFORMANCE OF MULTIFUNCTIONAL NANO-ENHANCED HIERARCHICAL COMPOSITES	Andres Nistal1, Ravi Chitwan1, Brian G. Falzon1*, Stephen C. Hawkins1,2  1 School of Mechanical and Aerospace Engineering, Queen’s University Belfast, UK, BT9 5AH Email: A.Nistal@QUB.ac.uk, Web Page: http://www.qub.ac.uk Email: Rchitwan01@QUB.ac.uk, Web Page: http://www.qub.ac.uk Email: B.Falzon@QUB.ac.uk, Web Page: http://www.qub.ac.uk Email: Stephen.Hawkins@QUB.ac.uk, Web Page: http://www.qub.ac.uk  2Dept. of Materials Science and Engineering, Monash University, Clayton, Victoria, Australia, 3800 Email: Stephen.Hawkins@Monash.edu, Web Page: http://eng.monash.edu.au	3662
3667	Well-dispersed multi-walled carbon nanotube/peek nano-composites and their photoluminescence properties	Qing Zhang (Super C Inc., Shenzhen Cone Technology Co., Ltd.), Chunyen Hsu (Super C Inc., University of Delaware), Kathryn Scafford (Super C Inc.), Fei Deng (Super C Inc., Shenzhen Cone Technology Co., Ltd.)	3667
3676	THE DAMPING PROPERTIES OF DIFFERENT CNT FILMS CHARACTERIZED BY CYCLIC TENSILE TESTING	Min Li (Beihang University), Qianli Liu (Beihang University), Shaokai Wang (Beihang University), Qingwen Li (Suzhou Institute of Nano-Tech and Nano-Bionics), Zuoguang Zhang (Beihang University)	3676
3695	POLYLACTIC ACID/ MAGNESIUM OXIDE NANOCOMPOSITE FILMS FOR FOOD PACKAGING APPLICATIONS	Chetan Swaroop (Motilal Nehru National Institute of Technology), MUnited Kingdomul ShUnited Kingdomla (Motilal Nehru National Institute of Technology, University of Johannesburg)	3695
3701	EFFECT OF TIO2 ON THERMAL STABILITY, FLAME RETARDANCY PROPERTIES OF REDUCED GRAPHENE OXIDE/POLYPROPYLENE NANOCOMPOSITES	Hongda Chen, Aiqing Ni, Jihui Wang (Wuhan University of Technology)	3701
3715	Molecular dynamics simulations of tension-induced deformation in CNT kirigami	Yushun Zhao (Harbin Institute of Technology, Xiamen University) Jianyang Wu (Xiamen University, Norwegian University of Science and Technology (NTNU)), Chao Sui (Harbin Institute of Technology), Zhisen Zhang (Xiamen University), Xiaodong He (Harbin Institute of Technology), Chao Wang (Harbin Institute of Technology)	3715
3746	SMART MULTI-FUNCTIONAL CARBON NANOTUBE/POLY(VINYL ALCOHOL) COMPOSITE FIBERS	G.  Zhou, 1,2 J. H. Byun, 1 Y. Oh, 1 M. K. Um, 1 B. S. Kim, 1 J. I. Song 2  1 Korea Institute of Materials Science, 797 Changwondaero, Changwon, 51508, South Korea 2 Department of Mechanical Engineering, Changwon National University, Changwon 641773, South Korea Email: ghzhou@alum.imr.ac.cn	3746
3773	MULTISCALE ANALYSIS ON TOUGHNESS ENHANCEMENT OF EPOXY/SILICA NANOCOMPOSITES WITH INTERFACIAL PARTIAL AND PROGRESSIVE DEBONDING	J. -G. Han1†, H. Shin1 and M. Cho1*  1 Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, Republic of Korea. † Presenting author (carlossron@snu.ac.kr) *Corresponding author (mhcho@snu.ac.kr)	3773
3768	COMPARATIVE STUDY OF CARBON-BASED NANO-FILLERS/POLYANILINE HYBRIDS REINFORCED POLYMER COMPOSITES	Xiuyan Cheng (University of Tokyo), Michihiro Yamamoto (Tokyo University of Science), Jun Koyanagi (Tokyo University of Science), Tomohiro Yokozeki (University of Tokyo)	3768
3796	Mechanical Properties of Functionalized Graphite Oxide PP Nanocomposites	R. Mikael Larsen (Aalborg University)	3796
3803	QUANTIFICATION OF DISPERSION AND MIXING OF NANOFILLERS IN POLYETHYLENE COMPOSITES USING RAMAN SPECTROSCOPY	Anna E. Lewandowska (University of Exeter), James Beard (University of Exeter), Erik Frank (Institute of Textile Chemistry and Chemical Fibers (ITCF)), Nor H. Inai (University of Exeter), Stephen J. Eichhorn (University of Exeter)	3803
3824	IMPROVED ELECTRIC HEATING PROPERTIES OF EPOXY NANOCOMPOSITE FILMS CONTAINING MWCNTS	Wenyan Liang, Fangxin Wang, Zhiwei Duan, Liang He, Hailing He (Harbin Engineering University)	3824
3842	Examining the influence of graphene species on toughening mechanisms in industrially relevant epoxy resins	Ian Gent (University of Bristol), Cristina Vallés (University of Manchester), Robert J Young (University of Manchester), Ian Kinloch (University of Manchester), Ian Hamerton (University of Bristol)	3842
3910	INTERFACIAL CONTROL IN GRAPHENE- AND TRANSITION METAL DICHALCOGENIDE-POLYMER NANOCOMPOSITES	Mark Bissett, Fang Wang, Andinet Aynalem, Robert A.W. Dryfe, Daniel Wolverson, Reshef Tenne, Robert J. Young, Ian A. Kinloch (University of Manchester, University of Bath, Weizmann Institute)	3910
3995	Positively charged graphene oxide modified with two silane molecules for multiple applications	Jincan Cui, Jing Li, Junhe Yang (University of Shanghai for Science and Technology)	3995
4028	THE EFFECT OF FUNCTIONALIZED REDUCED GRAPHENE OXIDE ON THE ELECTRICAL CONDUCTIVITY AND THERMAL STABILITY OF EPOXY	Jianqiang Liu, Jing Ma, Xi Nan, Weihui Zhu, Wen Qin (Taiyuan University of Technology)	4028
4029	IMPACT OF GD3+/ GRAPHENE SUBSTITUTION ON THE STRUCURAL AND MAGNETIC PROPERTIES OF MAGNESIUM FERRITE	Ebtesam E.Ateia, Seham K. Abdel-Aal, Asmaa Abd Allah (Cairo University)	4029
4056	EFFECTS OF SURFACE MODIFICATION AND CROSS-LINKED GRAPHENE OXIDE WITH ETHYLENEDIAMINE ON ELECTRICAL PROPERTIES OF REDUCED GRAPHENE OXIDE FILMS	Shaofeng Lin, Jianwei Zhang* and Dazhi Jiang  Department of Materials Science and Engineering, National University of Defense Technology Changsha, Hunan, 410073, People Republic of China Email: linsfbgg@163.com, jwzhang.nudt@gmail.com, jiangdz@nudt.edu.cn	4056
4086	Alignment study of carbon nanotube veils and the influence on their composites	Eileen Brandley, Qianqian Li, Emile S. Greenhalgh, Milo S.P. Shaffer (Imperial College London)	4086
4087	ANTIBACTERIAL GRAPHENE OXIDE AND METAL PARTICLES NANOCOMPOSITES FOR INHIBITION OF PATHOGENIC BACTERIA STRAINS	Virginija Jankauskaitė1, Povilas Lozovskis2, Astra Vitkauskienė2 and Algirdas Lazauskas3  1 Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Kaunas, Lithuania, Studentų St. 56, LT-51423 Kaunas, Lithuania, virginija.jankauskaite@ktu.lt 2 Faculty of Medicine, Lithuanian University of Health Science, LT-44307 Kaunas,  Mickevičiaus St. 9, Lithuania, lozovskis@gmail.com, astravitka@hotmail.com 3 3Institute of Materials Science, Kaunas University of Technology, Kaunas, Lithuania,  K. Baršausko St. 59, LT-51423 Kaunas, Lithuania, algirdas.lazauskas@ktu.lt	4087
4133	Mode I Interlaminar Fracture Toughness of Carbon Nanotube Web-Modified Polymer Composites	Ravi Chitwan (Queen’s University Belfast), Brian G. Falzon (Queen’s University Belfast), Stephen C. Hawkins (Queen’s University Belfast, Monash University), Andres Nistal (Queen’s University Belfast)	4133
4142	Flexible Strain Sensors Based on Printed Carbon Nanotube Layers on Polydimethylsiloxane	Jihua Gou (University of Central Florida)	4142
4171	MAGNESIUM COMPOSITES REINFORCED BY METAL COATED CARBON NANOTUBES	Qianqian Li (Imperial College London), Samaneh Nasiri (University of Erlangen-Nuremberg), Michael Zaiser(University of Erlangen-Nuremberg)	4171
4192	EFFECTS OF SURFACE MODIFICATION AND CROSS-LINKED GRAPHENE OXIDE WITH ETHYLENEDIAMINE ON ELECTRICAL PROPERTIES OF REDUCED GRAPHENE OXIDE FILMS	Shaofeng Lin, Jianwei Zhang, Gang Shi, Dazhi Jiang (National University of Defense Technology)	4192
4224	ULTRADISPERSED NANOCOMPOSITES MEMBRANE OF COPPER@REDUCED GRAPHENE OXIDE/PVDF FOR ENHANCED THERMAL CONDUCTIVITY	Li Shuang1, Ye Li2 ,Zhao Yan3  1 School of Materials Science and Engineering, Beihang University, Beijing 100191, China	4224
4255	JOULE HEAT TREATMENT ON CARBON NANOTUBE FILMS AT DIFFERENT ELEVATED TEMPERATURES	Tianshu Li (Beihang University), Min Li (Beihang University), Yizhuo Gu (Beihang University), Shaokai Wang (Beijing University), Qingwen Li (Suzhou Institute of Nano-Tech and Nano-Bionics), Zuoguang Zhang (Beihang University)	4255
4261	ULTRADISPERSED NANOCOMPOSITES MEMBRANE OF COPPER@REDUCED GRAPHENE OXIDE/PVDF FOR ENHANCED THERMAL CONDUCTIVITY	Li Shuang, Ye Li ,Zhao Yan（Beihang University）	4261
4333	TENSILE PROPERTIES OF AEROGEL-BASED CARBON NANOTUBE POLY (VINYL ALCOHOL) COMPOSITE FIBERS	Jialin Liu, Cuixia Zhang, Shuxuan Qu, Qingwen Li, Weibang Lu (Suzhou Institute of Nano-Tech and Nano-Bionics)	4333
4408	EFFECT OF GRAPHENE NANOPLATELET THICKNESS AND CONCENTRATION ON THE TENSILE PROPERTIES OF EPOXY RESIN	Zoi S. Metaxa (National Technical University of Athens), Philippe Poulin (University of Bordeaux), Zafeiroula Paragkamian (University of the Aegean), Stavros K. Kourkoulis (National Technical University of Athens), Nikolaos D. Alexopoulos (University of the Aegean)	4408
4421	Preparation and characterization of super-black surface coating using carbon nanomaterials	Wenfu Cai, Hui Zhang, Zhong Zhang (National Center for Nanoscience and Technology)	4421
4422	BiOmFn/BiOxIy/GO NANOCOMPOSITES: SYNTHESIS, CHARACTERIZATION, AND PHOTCATALYTIC ACTIVITY	Jing-Ya Fu, Chiing-Chang Chen (National Taichung University of Education)	4422
4430	A NEW APPROACH TO SYNTHESIS OF MICRO/NANOSTRUCTURED SIOX/C COMPOSITE AS HIGH-PERFORMANCE ANODE MATERIAL FOR LITHIUM-ION BATTERIES	Pengpeng Lv1,2, Hailei Zhao1,* and Zhaolin Li1 1 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China 2 State key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China Email: lvpengpeng@ipe.ac.cn	4430
4437	Numerical Modeling of Delamination Resistance Improvement Through The Use of CNT-Reinforced Bonding Layers	Yassine El-Assami1, Venkadesh Raman2, Monssef DRISSI-HABTI1,3,* 1 - PRES LUNAM IFSTTAR, CS4 Route de Bouaye 44344 Bouguenais, France. 2 - Institut de Recherche Technologique (IRT) Jules VERNE, Chemin du Chaffault, 44340 Bouguenais, France. 3 - Director of the Consortium Durability of Intelligent Composite Materials (GIS DURSI) *Corresponding Author (monssef.drissi-habti@ifsttar.fr)	4437
4457	Graphene/Copper nanowire nanocomposite for thermal management application	Xianxian Sun, Fan Xu, Zaishan Lin, Qingyu Peng, Xiaodong He, Yibin Li (Harbin Institute of Technology)	4457
4460	THEORETICAL INVESTIGATION ON THE ADSORPTION AND DIFFUSION OF ATOMS/IONS ON THE SURFACE OF TWODIMENSIONAL NANOCRYSTAL	Li-Jun Zhou1, Jian-Gang Guo2 and Xin-Xin Yao2  1 Department of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China, zhoulj_tj@163.com 2 Tianjin Key Laboratory of Modern Engineering Mechanics, School of Mechanical Engineering, Tianjin University, Tianjin 300072, China, guojg@tju.edu.cn	4460
4479	FABRICATION PROCESSES AND PROPERTIES OF CARBON NANOMATERIALS FILLED NANOCOMPOSITES	Soon Hyung Hong (Korea Advanced Institute of Science and Technology (KAIST))	4479
4484	SHAPE-MEMORY POLYMER NANOCOMPOSITES WITH A 3D CONDUCTIVE NETWORK FOR BIDIRECTIONAL ACTUATION	Xu Zhao, Qingyu  Peng, Xiaodong He  and Yibin  Li (Harbin Institute of Technology)	4484
4514	The use of 3D graphene networks for the creation of bio-inspired self-monitoring tough ceramic nanocomposites	Olivier T. Picot (Queen Mary University of London), Victoria G. Rocha (Imperial College London), Claudio Ferraro (Imperial College London), Na Ni (Imperial College London), Eleonora D’Elia (Imperial College London), Sylvain Meille (Université de Lyon), Jerome Chevalier (Université de Lyon), Theo Saunders (Queen Mary University of London, Nanoforce Technology Limited), Mike J. Reece (Queen Mary University of London, Nanoforce Technology Limited), Ton Peijs (Queen Mary University of London)	4514
4520	The Effects of Irradiation Modification on The Floating Carbon Nanotube Film	Yanjie Wang (Beihang University), Min Li (Beihang University), Mengsi Zhang (Beihang University), Yizhuo Gu (Beihang University), Shaokai Wang (Beihang University), Qingwen Li (Suzhou Institute of Nano-Tech and Nano-Bionics), Zuoguang Zhang (Beihang University)	4520
4523	All cellulose composites reinforced with crystal nanocellulose and micro-cellulose fibers	Jing Cao, Man Jiang, * Wei Xie, David Hui and Zuowan Zhou*  Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, 610031, Chengdu, P.R. China.	4523
4534	SELECTIVE LASER SINTERING OF POLYAMIDE12 COMPOSITES	Mengxue Yan, Xiaoyong Tian, Gang Peng (Xi’an Jiaotong University)	4534
4546	Effect of Buckypaper on the Properties of Carbon Fiber Reinforced Hybrid Composites	Xuhai Xiong (Chinese Academy of Sciences, Shenyang Aerospace University), Han Wang (Chinese Academy of Sciences),You Zeng (Chinese Academy of Sciences), Rong Ren (Shenyang Aerospace University)	4546
4549	UltraHigh Performance EMI Shielding Materials of Thermal Reduced Graphene AerogelPDMS Nanocomposites	Li Yibin, Chen Ruofan, Xu fan, Peng Qingyu (Harbin Institute of Technology)	4549
4560	INFLUENCE OF HIGH INTENSITY ULTRASONICATION ON THE FABRICATION OF POLY(LACTIC-CO-GLYCOLIC ACID)/ CHITOSAN NANOCOMPOSITES BASED ON PICKERING EMULSIONS	Jiaxin Wang1*, Dazhu Chen2, Wing-Chueng Law1 and Chak-Yin Tang1 1 Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, China 2 College of Materials Science and Engineering, Shenzhen University, Shenzhen, Guangdong, China * E-mail: jx.wang@connect.polyu.hk	4560
4562	Multifunctional Nano Silver/Carbon/Epoxy Conductive Adhesive	Xiaojiang Xu, Hongbo Gu (Tongji University)	4562
4565	POLYSTYRENE CONTROLLED FORMATION OF CARBON NANOCOMPOSITES FOR ENVIRONMENTAL REMEDIATION	Hongbo Gu (Tongji University)	4565
4573	EFFECTS OF SILICA ON NANO-IMPRINTING PATTERN FORMATION OF PHOTO-REACTIVE ACRYLATE RESINS	Seok Hyeon Kim and Kigook Song Department of Advanced Materials Engineering for Information and Electronics Kyung Hee University, Yongin, Gyeonggi-do 446-701, S. Korea ksong@khu.ac.kr	4573
4585	ENHANCED TRIBOLOGICAL PROPERTIES OF GRAPHENE-BASED NANOCOMPOSITES	You Zeng, Han Wang, Tengxin Zhang, Zhe Ying (Chinese Academy)	4585
4586	POSITIVE TEMPERATURE COEFFICIENT EFFECT OF NANOCARBON/POLYMER COMPOSITES	Han Wang, Cheng Yang, Zhe Ying, You Zeng (Chinese Academy)	4586
4589	IMPROVING INSULATING PROPERTIES OF EPOXY POLYMER BY A TRACE OF FULLERENE PARTICLES	Pengfei Chu, Hui Zhang, Feng Gao, Zhong Zhang (National Center for Nanoscience and Technology)	4589
4595	Extended Abstract-Electrical and optical properties of LSMO/Monolayer MoS2 photodiodes	Yue Niu (IMDEA-Nanociencia, Harbin Institute of Technology), Riccardo Frisenda (IMDEA-Nanociencia), Simon A. Svatek (IMDEA-Nanociencia), Gloria Orfila (Universidad Complutense de Madrid), Weicheng Jiao (Harbin Institute of Technology), Rongguo Wang (Harbin Institute of Technology), Nicolás Agraït (IMDEA-Nanociencia, Universidad Autónoma de Madrid), Federico Monpean (Instituto de Ciencia de los Materiales de Madrid (ICMM-CSIC)), Carlos León (Universidad Complutense de Madrid), Alberto Rivera-Calzada (Universidad Complutense de Madrid), David Perez De Lara (IMDEA-Nanociencia), Jacobo Santamaria (Universidad Complutense de Madrid), Andres Castellanos-Gomez	4595
4598	HIGH THERMAL CONDUCTIVITY COMPOSITE WITH SHEAR-INDUCED ALLIGNED BORON NITRIDE NANOSHEETS	Junchao Liu, Hui Zhang, Zhong Zhang (National Center for Nanoscience and Technology)	4598
4600	ULTRADISPERSED NANOCOMPOSITES MEMBRANE OF COPPER@REDUCED GRAPHENE OXIDE/PVDF FOR ENHANCED THERMAL CONDUCTIVITY	Shuang Li, Yan Zhao, Ye Li, Xiaoran Zhao (Beihang University)	4600
4603	INVESTIGATION ON THE PROPERTIES OF BARIUM FERRITE/EPOXY NANOCOMPOSITES	Hongyuan Zhang, Hongbo Gu (Tongji University)	4603
4610	IN-MOULD MULTIFUNCTIONAL COATINGS WITH GRAPHENE NANOCOMPOSITES	Konstanze Seidler (Imperial College London), Siti-Ros Shamsuddin (Imperial College London), Alexander Bismarck (Imperial College London, University of Vienna)	4610
4616	MODIFICATION OF GRAPHENE NANOSHEETS WITH AMORPHOUS SILICA COATING FOR ELECTRICALLY INSULATING AND THERMALLY CONDUCTIVE FILLERS OF THERMAL INTERFACE MATERIALS	Chaoxuan Shen, You Zeng (Chinese Academy of Sciences)	4616
4626	DESIGN AND FABRICATION OF MECHANICALLY FLEXIBLE THREE-DIMENSIONAL GRAPHENE/POLYMER NANOCOMPOSITES FOR MULTIFUNCTIONAL APPLICATIONS	Long-Cheng Tang, Li Zhao, Li-Li Hu, Li-Zhi Guan, Li-Xiu Gong, Hui Xu, Qian Wu (Hangzhou Normal University)	4626
Theme 1 Materials Science
1.7 Track Fibers
Paper ID	Full Paper Title	Author	Paper ID
3322	STATIC ANODIC OXIDATION OF CARBON FIBERS WITH DIFFERENT ELECTROLYTES AND SUBSEQUENT CHEMICAL ANALYSIS OF THE CARBON FIBER SURFACE	Matthias Bauer, Sergej Beratz, Fabian Schubert, Judith Moosburger-Will, Siegfried Horn (University of Augsburg)	3322
3106	Oxidation of carbon fiber and its effect on mechanical properties	Fei Su, Pengfei Huang, Tenghui Li, Ruixia Yao, Xiaoxu Pan (Beijing University of Aeronautics and Astronautics)	3106
3261	Comparison on the performance of domestic QZ5526 and Toray T800H carbon fibre	Haichao Huang (Weihai Guangwei Composities Co.,Ltd)	3261
3323	AXIAL AND RADIAL SHRINKAGE OF POLYACRYLONITRILE- BASED STABILIZED FIBERS DURING LOW-TEMPERATURE CARBONIZATION TO CARBON FIBERS	Patrick Gutmann, Judith Moosburger-Will, Samet Kurt, Siegfried Horn (University of Augsburg)	3323
3353	Influence of Organic Vapor Annealing on Structure and Property of Conjugated Composite Fiber	Xinyue Wang, Mingqiao Ge (Jiangnan University)	3353
3403	ON THE STOKES-BRINKMAN COUPLING WITH ANISOTROPIC NAVIER SLIP AND EFFECTIVE VISCOSITY FOR FLOW SIMULATIONS IN DUAL-SCALE FIBROUS POROUS MEDIA	Jingang Lu and Wook Ryol Hwang*  School of Mechanical Engineering, Research Centre for Aircraft Parts Technology (ReCAPT), Gyeongsang National University, Jinju, 52828, Korea	3403
3638	Effect of current annealing on magnetic and mechanical properties of Co-based amorphous glass-coated microwires	Y.F. Wang1, F.X. Qin1, H.wang ,Y. Tian, Y.H. Li, H.X. Peng Institute for Composites Science Innovation（InCSI）, School of Materials Science and Engineering, Zhejiang University, Zheda Road, Hangzhou, 310027, PR. China	3638
3673	Basalt Fiber with Pyrolytic Carbon Coating for Sensory Applications	Bin Hao, Peng-Cheng Ma (Chinese Academy of Sciences)	3673
3746	SMART MULTI-FUNCTIONAL CARBON NANOTUBE/POLY(VINYL ALCOHOL) COMPOSITE FIBERS	G.  Zhou (Korea Institute of Materials Science, Changwon National University), J. H. Byun (Korea Institute of Materials Science), Y. Oh (Korea Institute of Materials Science), M. K. Um (Korea Institute of Materials Science), B. S. Kim (Korea Institute of Materials Science), J. I. Song (Changwon National University)	3746
3861	Carbon fibre surfaces with grafted functional groups and sizings and its interaction with different matrices	E. Wölfel (Institute of Polymer Research in Dresden), L. C. Henderson (Deakin University), C. Scheffler (Institute of Polymer Research in Dresden)	3861
3862	TAILORING AND EVALUATING FIBRES AND COMPOSITE INTERPHASES: CURRENT APPROACHES	T. Förster, C. Scheffler, E. Mäder, C. Bellmann (Institute of Polymer Research in Dresden)	3862
3882	Functional carbon nanotube/cellulose composite fibers prepared from solution-spinning	H. Qi (Leibniz-Institut für Polymerforschung Dresde), E. Mäder (The Leibniz Institute of Polymer Research in Dresden, Dresden University of Technology)	3882
4090	Wettability of Carbon Fiber Tows	Jian Wang (Harbin Institute of Technology, KU Leuven), Carlos A. Fuentes (KU Leuven), Dongxing Zhang (Harbin Institute of Technology), Xungai Wang (Deakin University), Aart Willem Van Vuure (KU Leuven), David Seveno (KU Leuven)	4090
4124	TENSILE BEHAVIOUR OF BASALT FIBRES AFTER THERMAL TREATMENT	Jacopo Tirillò, Maria Carolina Seghini, Fabrizio Sarasini, Teodoro Valente (The Sapienza University of Rome)	4124
4125	STUDY OF CO-SOLVENT EFFECT ON THE DISSOLUTION OF CELLULOSE IN IONIC LIQUID AND THE PROPERTIES OF REGENERATED CELLULOSE FIBRES	Chenchen Zhu, Anastasia Koutsomitopoulou, Jeroen Van Duijneveldt, Kevin Potter (University of Bristol)	4125
4149	WETTABILITY OF A SINGLE CARBON FIBER	Si Qiu (Harbin Institute of Technology, KU Leuven), Carlos Fuentes (KU Leuven), Dongxing Zhang (Harbin Institute of Technology), Aart Willem Van Vuure (KU Leuven), David Seveno (KU Leuven)	4149
4197	Failure Mechanisms of Instability-Assisted 3D Printed Microstructured Fibers	Fr´ed´erick P. Gosselin, Shibo Zou, Daniel Therriault Laboratory for Mulstiscale Mechanics (LM2), Department of Mechanical Engineering, ´Ecole Polytechnique de Montr´eal, P.O. Box 6079, Station Centre-Ville, Montr´eal, Qu´ebec, Canada, H3C 3A7 frederick.gosselin@polymtl.ca, www.fgosselin.com	4197
4233	CARBON COMPOSITE FIBERS FROM BY-PRODUCTS OF	Moo Sung Kim (KITECH) Yoong Ahm Kim (Chonnam National University), Kap Seung Yang (Chonnam National University)	4233
4316	High throughput nanofiber production by rotation-aided needleless electrospinning	Kolos Molnár, Tibor Czigány (Budapest University of Technology and Economics, MTA–BME Research Group for Composite Science and Technology)	4316
4366	Knittability and oxygen plasma treatment on polyimide fibers	Fangbing Lin, Jinhua Jiang, Nanliang Chen, Xiaodong Du, Chuanli Su (Donghua University)	4366
4367	The improved knittability of polyimide fibers using oxygen plasma and coating treatments	Fangbing Lin12, Jinhua Jiang12*, Nanliang Chen12, Xiaodong Du2, Chuanli Su2 1. Key Laboratory of High Performance fibers & products, Ministry of Education, Donghua University, Shanghai, 201620, P. R. China 2. College of Textiles, Donghua University, Shanghai 201620, P. R. China *Corresponding authors email: jiangjinhua@dhu.edu.cn	4367
4453	Profiling structure–mechanical heterogeneity of PAN carbon fiber along radius direction	Lifeng Hao, Ping Peng, Weicheng Jiao, Rongguo Wang, Xiaodong, He (Harbin Institute of Technology)	4453
4542	CONTROLLABLE SYNTHESIS OF ALIGNED CARBON NANOTUBE/ALUMINUM OXIDE HYBRID FIBERS BY ATOMIC LAYER DEPOSITION	Mingyang Li, Mei Zu (National University of Defense Technology)	4542
4563	CONDUCTIVE GLASS FIBER COATED WITH GRAPHENE PREPARED BY DIP COATING METHOD	Minghe Fang, Yabin Hao, Xuhai Xiong, You Zeng (Chinese Academy of Science)	4563
4636	BREAKING ADVANCED FIBER DEVELOPMENT PARADIGM: CONTINUOUS SUPERNANOFIBERS WITH LOW CRYSTALLINITY	Dimitry Papkov, Yuris Dzenis (University of Nebraska-Lincoln)	4636
Theme 1 Materials Science
1.8 Track Fiber-reinforced Composites
Paper ID	Full Paper Title	Author	Paper ID
2841	INTERFACIAL EVALUATION OF UD-CFRP BY THERMAL AGING VIA ACOUSTIC EMISSION, ELECTRICAL RESISTANCE AND THERMOGRAM METHOD	P.S. Shin (Gyeongsang National University), D. J. Kwon (Gyeongsang National University), J. H. Kim (Gyeongsang National University), K. L. DeVries (The University of Utah), J.M. Park (Gyeongsang National University, The University of Utah)	2841
2805	Preparation of 2.5DSiO2f/SiN Composites and Interface Analysis	Ma Na, Men Weiwei, Liu Jian, Fu Qiang, Xuan Lixin （Research Institute for Special Structures of Aeronautical Composites AVIC, The Aeronautical Science Key Lab for High Performance Electromagnetic Windows, Ji’nan 250023,Shandong, China）	2805
2806	Dynamic analysisof the evolution law of low-velocity impact damage in composite laminates with a continuum damage model	Peng Qu1*, Yuxi Jia2 1 School of Mechanical & Automotive Engineering, Liaocheng University, Liaocheng 252000, China 2 Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061, China * Corresponding author. E-mail address: qupeng@lcu.edu.cn	2806
2830	Wood-Cement Composites as Engineering Materials	First A. Seyyed Mehdi Radeghi Mehrjou 1, Second B. Hamed Nasiri 2  1 Lecturer at Technical and Vocational University (Sowmeh sara Technical College), m.radeghi@tvu.ac.ir 2 Lecturer at Technical and Vocational University (Sowmeh sara Technical College), h.nasiri@tvu.ac.ir	2830
2844	A Novel Development and Application of Self-crosslinking Strengthening for Polyamideamidemine-epichlorohydrin (PAE) Resin in Polyacrylonitrile (PAN) Sheet	Sufeng Zhang, Dongyan Zhao, Chen Hou, Miaoxiu Yang, Nan Zhang, Lina Liu (Shaanxi University of Science & Technology)	2844
2860	A STUDY OF TRANSVERSE CRACK FORMATION IN FIBER-REINFORCED COMPOSITES BY GROWTH OF FIBER-MATRIX DEBONDS	Linqi Zhuang (Texas A&M University), Ramesh Talreja (Texas A&M University, Luleå University of Technology), Andrejs Pupurs (Luleå University of Technology), Janis Varna (Luleå University of Technology)	2860
2884	Toughening QF/PSA with silane coupling agent containing poly(imide siloxane)	Lingao Ru, Yanhong Hu, Yuanbo Gu, Fangfang Zhang, Bin Cheng, Yan Zhou, Shifeng Deng (East China University of Science and Technology)	2884
2920	Experiments and analytical modeling for designing tape spring composites	Huina Mao, Gunnar Tibert (KTH Royal Institute of Technology)	2920
2921	EFFECT OF DRILLING PARAMETERS ON SURFACE QUALITY OF NATURAL FIBER REINFORCED POLYMER COMPOSITES	M.Omkumar, K.Selvakumar, A.Suresh Babu (Anna University)	2921
2931	Mechanical analysis and viscoelastic modeling of a 3D interlock woven composite	Courtois, A. (Ecole Polytechnique Montreal); Marcin, L. (Safran Tech); Ruiz, E. (Ecole Polytechnique Montreal); Lévesque, M. (Ecole Polytechnique Montreal)	2931
3001	Development of New Simulation Technology for Compression Molding of Long Fiber Reinforced Plastics	Shinya Hayashi (JSOL Corporation), Hao Chen (Livermore Software Technology Corporation), Wei Hu (Livermore Software Technology Corporation)	3001
3005	PSEUDO-DUCTILE BEHAVIOR OF GLASS/CARBON FIBER HYBRID COMPOSITE WITH CARBON/EPOXY PLATELETS	Ichenihi Amos1, Wang Qingtao2, Md. Hasan Ikbal2, Li Wei2,3* 1College of Material Science and Engineering, Donghua University, Shanghai, China 2College of Textiles, Donghua University, Shanghai, China 3 Key Laboratory of Textile Science &Technology, Ministry of Education * Corresponding author, E-mail address: liwei@dhu.edu.cn	3005
3013	Preparation and Properties of Zirconia Fibre Reinforced Boron Phenolic Resin for Ceramic and High Temperature Composites	Zhen Yue Zou (Wuhan University of Technology)	3013
3022	EVAPORATION-INDUCED SURFACE MODIFICATION OF PBO FIBER AND INVESTIGATION ITS UV RESISTANCE	Peng Zhu1, Limin Bao2   1 Department of Bioscience and Textile Technology, Interdisciplinary Graduate School of Science and Technology, Shinshu University, 3-15-1 Tokida, Ueda, Nagano 386-8567, Japan 2 Faculty of Textile Science and Technology, Shinshu University, 3-15-1 Tokida, Ueda, Nagano 3868567, Japan	3022
3056	HOT GAS TEMPERATURE EFFECT ON THERMOPLASTIC COMPOSITES THERMAL USING THE AUTOMATED TAPE LAYING	Wang Changchun, Hu Zhendong*, Yue Guangquan, Zhang Jiazhen and Liu Jianguang Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Beijing 102211, China; E-mail: wangchch2007@163.com; huzhendong@comac.cc; yueguangquan@comac.cc; zhangjiazhen@comac.cc; liujianguang@comac.cc	3056
3057	LAYING SPEED EFFECT ON THERMOPLASTIC COMPOSITES THERMAL IN AUTOMATED TAPE LAYING PROCESS	Wang Changchun (Beijing Aeronautical Science and Technology Research Institute), Yue Guangquan (Beijing Aeronautical Science and Technology Research Institute), Zhang Jiazhen (Beijing Aeronautical Science and Technology Research Institute), Liu Jianguang (Beijing Aeronautical Science and Technology Research Institute), Li Jin (Ningxia University)	3057
3062	COMPRESSIVEPROPERTYREINFORCEMENTOF UNIDIRECTIONALFRPBYFILAMENTCOVERMETHOD	FangtaoRuan1,ZhenzhenXu1 ,LiYang1 andWeiLi1 1 CollegeofTextile&Fashion,AnhuiPolytechnicUniversity,Wuhu,Anhui,China E-mail:rft62@sina.com Website:http://www.ahpu.edu.cn/fzfzxy/	3062
3098	EXPERIMENTAL INVESTIGATION OF THE VIBRATION PROPERTIES OF 3D BRAIDED COMPOSITES	First A: Dong Apeng1, Second B: Li Shu2, Third C: Zhu Wenguo3, Fourth D: Pu Jing4 1 School of Aeronautic Science and Engineering, Beihang University, dongapeng@buaa.edu.cn 2 School of Aeronautic Science and Engineering, Beihang University, lishu@buaa.edu.cn 3 School of Aeronautic Science and Engineering, Beihang University, zhuwenguo@buaa.edu.cn 4 Department of Mechanical, Materials & Manufacturing Engineering, Faculty of Engineering, University of Nottingham, jing.pu@nottingham.ac.uk	3098
3107	Compression fatigue of Wind Turbine Blade composites materials and damage mechanisms_A Fraisse_P Brøndsted	Anthony Fraisse, Povl Brøndsted (Technical University of Denmark)	3107
3194	AN AXIAL TENSILE TEST OF COMPOSITE STIFFENED PANELS WITH TWO MAN-HOLES AFTER IMPACT	Peng Shi, Qun Zhao, Jianzhuo Sun and Chuanjun Liu  Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Future Science and Technology Park, 102211, shipeng@comac.cc	3194
3204	A MODELING METHOD OF CURING DEFORMATION FOR CFRP COMPOSITE STIFFENED PANEL	Wang Yang, Gao Jubin, Bo Ma, Shi Peng (Beijing Aeronautical Science & Technology Research Institute of COMAC)	3204
3224	IN-SITU MONITORING OF AIR REMOVAL DURING VACUUM BAG-ONLY (VBO) PROCESSING	Wei Hu, Steven Nutt (University of Southern California)	3224
3237	ENHANCEMENT OF INTERLAMINAR FRACTURE TOUGHNESS AND  DAMAGE MECHANISMS ANALYSIS IN CFRPS REINFORCED  WITH SPRAYED NANO PARTICLES	Huiyong He 1,  Xin Liu 2,  Zhanjun Wu*  School of Aeronautics and Astronautics, Faculty of Vehicle Engineering and Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian116023, P.R. China	3237
3244	A TOUGHENING AND CONDUCTIVE APPROACH FOR HYBRID COMPOSITES WITH NON-WOVEN CARBON TISSUE INTERLEAVES	F Xu (Northwestern Polytechnical University, The University of Sydney), XS Du (Jinan University, The University of Sydney), XY Hu (Northwestern Polytechnical University), WG Guo (Northwestern Polytechnical University)	3244
3249	THE DAMAGE OF LOW-VELOCITY IMPACTED CFRP LAMINATES WITH DIFFERENT STACKING SEQUENCES BASED ON MICRO-MECHANICS OF FAILURE	Xiaofei Lou, Hongneng Cai, Xuecheng Han, Fei Jiao (Xi' an Jiaotong University)	3249
3252	Enhancement of Interface properties of aramid fiber composites with effectively adhesive epoxy matrix	Limin Liu, Gang Li, Xiaoping Yang (Beijing University of Chemical Technology)	3252
3256	In Situ Polymerization and Characterization of PA6/CFRTP Composites	Mei Xian Li (Seoul National University), Gyu Hee Lee (Seoul National University), Dasom Lee (Seoul National University), Jaemin Jung (Seoul National University), Seung Mo Kim (Korea University of Technology and Education), Woo Il Lee (Seoul National University)	3256
3259	Study on production technology and performance of CFRP pultrudedplate for power blades	Fengsen Lin, Guangyou Li, Fengxuan Li (Weihai Guangwei Composites Co., Ltd.)	3259
3272	Dynamic analysisof the evolution law of low-velocity impact damage in composite laminates with a continuum damage model	Peng Qu (Liaocheng University), Yuxi Jia (Shandong University)	3272
3277	HIERARCHICAL AND STATISTICAL ANALYSIS ON THE TENSILE STRENGTH OF SUPERCONDUCTING WIRE	Zhi-Yang Wang, Hua-Dong Yong, You-He Zhou (Lanzhou University)	3277
3291	A NEW DESIGN OF END-TAB FOR THE TENSILE TESTING OF UNIDIRECTIONAL THERMOPLASTIC COMPOSITES CF/PA6	Mazlina Mohd Tahir (Kyushu University, Department of Polytechnic Educational Malaysia), Wen-Xue Wang (Kyushu University) , T. Matsubara (Kyushu University)	3291
3302	INFLUENCE OF PTFE FIBER CONTENT ON THE TRIBOLOGICAL PROPERTIES OF HYBRID KEVLAR/PTFE FABRIC SELF-LUBRICATING COMPOSITES	Yingyi Liu and Dongxing Zhang* Carbon Fiber Reinforced Plastics Laboratory, Harbin Institute of Technology, harbin 150001, China *Corresponding author:dongxingzhang@163.com	3302
3305	Develop high temperature glass fibre/PEKK prepreg	Nassier Almtteri (University of Liverpool, University of technology), Robert Birch (University of Liverpool), Zhongwei Guan (University of Liverpool, Chengdu University)	3305
3316	PLY-TAILORED NANOPARTICLE MATRIX MODIFICATION IN CROSS-PLY CFRP LAMINATES	Christian Leopold1, Andreas Schetle1, Julia Kosmann1 and Bodo Fiedler1  1 Institute of Polymer Composites, Technical University Hamburg-Harburg, Denickestraße 15, D-21073 Hamburg, Germany, christian.leopold@tuhh.de, andreas.schetle@tuhh.de, julia.kosmann@tuhh.de, fiedler@tuhh.de, www.tuhh.de/kvweb	3316
3347	TIME DEPENDENT DEFORMATION BEHAVIOR OF ADAPTIVE FIBER REINFORCED PLASTICS	Moniruddoza Ashir, Jan Hindahl, Andreas Nocke, Chokri Cherif (Dresden University of Technology)	3347
3389	THE METHOD TO IMPROVE INTERFACIAL PROPERTIES OF CFRP COATING NANO-CARBON-MATERIAL ON CF SURFACE	First A. Jianjun Jiang1, Second B. Guoli Deng1 and Third C. Xinyu Gao1  1,2,3 Shaanxi Engineering Research Center for Digital Manufacturing Technology, Northwestern Polytechnical University, Xi’an 710072, PR China, E-mail address: jianjun@nwpu.edu.cn (J. Jiang)	3389
3407	Preparation and properties of chopped carbon fiber reinforced PEEK composites	Chen Shuhua (Xi’an Aerospace Composites Research Institute), Cui Hong (Xi’an Aerospace Composites Research Institute, National and Local Union Engineering Research Center of High-performance Carbon Fiber Manufacture and Application), Wang Xizhan (Xi’an Aerospace Composites Research Institute, National and Local Union Engineering Research Center of High-performance Carbon Fiber Manufacture and Application), Shen Zhen (Xi’an Aerospace Composites Research Institute)	3407
3416	HDPE AND PVC CREEP AND THERMAL RATCHETING BEHAVIOR UNDER COMPRESSION	Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid (Ecole Technologie Superieure)	3416
3464	Modeling three-dimensional anisotropic damage in unidirectionally reinforced composites at large deformations	Dominik Naake (RobertBoschGmbH), Fabian Welschinger (RobertBoschGmbH), Luise Kärger (Karlsruhe Institute of Technology(KIT)), Frank Henning (Karlsruhe Institute of Technology(KIT))	3464
3466	Mechanical Performances of PEKK Composite Materials Linked to the Processing Parameters	T. Choupin (CNRS, Airbus Group Innovations), B. Fayolle (CNRS), G. Regnier (CNRS), C. Paris (Airbus Group Innovations), J. Cinquin (Airbus Group Innovations), B. Brulé (Arkema)	3466
3467	THERMO-MECHANICAL BEHAVIOR OF A THERMOPLASTIC REINFORCED WITH DISCONTINUOUS GLASS FIBERS	D.Lopez (University of Southern Brittany, Renault SAS), S. Thuillier (University of Southern Brittany), Y. Grohens (University of Southern Brittany)	3467
3483	ASYSTEMATICAPPROACHTOINVARIANT-BASEDANISOTROPIC NON-ASSOCIATIVEPLASTICITYFORFIBERREINFORCEDPOLYMERS	B. Daum1, A. Dean1, and R. Rolfes1 1 Institute of Structural Analysis, Leibniz Universität Hannover, Appelstr. 9A, 30167 Hannover, Germany Email: b.daum@isd.uni-hannover.de, a.dean@isd.uni-hannover.de, r.rolfes@isd.uni-hannover.de	3483
3485	CHANGES IN THERMAL EXPANSION COEFFICIENT OF CFRP LAMINATE DUE TO THERMAL CYCLE	A. Kato1,2, K. Goto2, Y. Kogo1, R. Inoue1 1 Tokyo University of Science, kato.akifumi@ac.jaxa.jp, kogolab@me.com, inoue.ryo@rs.tus.ac.jp 2 Department of Space Flight Systems, Institute of Space and Astronautical Science, JAXA goto.ken@jaxa.jp	3485
3505	EFEECT OF CELLULOSE NANOFIBER (CENF) AND DISPERSING AGENT ON SCRATCH RESISTANCE AND TRANSPARENCY OF POLY(VINYL ALCOHOL)/CENF COMPOSITES	Shigeji Konagaya1, Hiroko Furuhashi1 Keiichi Noma2 and Mariko Terada3  1 Department of Research, Nagoya Industrial Science Research Institute, Japan, konagaya@apchem.nagoya-u.ac.jp 1 Graduate School of Engineering, Nagoya University, Japan 2 Division of Research and Development, Fujidenolo Co. Ltd., Japan  3 National Composite Center, Nagoya University, Japan	3505
3520	COMPOSITE MATERIAL PROPERTIES CHARACTERIZATION USING DIGITAL IMAGE CORRELATION AND FINITE ELEMENT MODEL UPDATING: UNCERTAINTY ANALYSIS	He TiRen1, Liu Liu1 and Makeev Andrew2  1 School of Aerospace Engineering, Beijing Institute of Technology, Beijing, China, 100083. liuliu@bit.edu.cn 2 Department of Mechanical and Aerospace Engineering, University of Texas at Arlington, Arlington, Texas. makeev@uta.edu, http://www.uta.edu/mae/AMSL/	3520
3570	Relationship of carbon fiber Surface Composition to Surface Energy	Fenghui Shi, Baoyan Zhang, Jia li, Yanwei Hei (AVIC Composite Corporation Ltd)	3570
3579	Deformationandresidualstressesduringcuringofhot-meltimpregnated phenolicresin/glassfabriccomposite	ZixuanLei 1,XueJiang1,YouLv1,YuhongLiu1*,XinliJing2* 1InstituteofPolymerScienceinChemicalEngineering,SchoolofChemicalEngineeringand Technology,Xi’anJiaotongUniversity,Xi’an710049,Shaanxi,China. 2DepartmentofAppliedChemistry,SchoolofScience,Xi’anJiaotongUniversity,Xi’an710049, Shaanxi,China.	3579
3583	OPTIMIZATION OF STRUCTURAL REACTION INJECTION MOLDING PROCESS (S-RIM) WITH DICYCLOPENTADIENE RESIN AS A MATRIX	Hyeong Min Yoo, Ji Ho Jeon, Jai Woong Choi, Woo Il Lee (Seoul National University)	3583
3593	Failure of matrix in a composite subjected to multi-axial loads	Yi Zhou, Zheng-Ming Huang, Yuan-De Xue, Li-Min Xin School of Aerospace Engineering & Applied Mechanics, Tongji University, 1239 Siping Road, Shanghai 200092, China.	3593
3615	MODE I RATE DEPENDENT MESO-MECHANICS OF Z-PINS	Hussein Hijazi (Imperial College London), Hao Cui (University of Oxford), Giuliano Allegri (Imperial College London), Stephen R. Hallett (University of Bristol), Ivana K. Partridge (University of Bristol), Nik Petrinic (University of Oxford)	3615
3627	A CRITICAL ASSESSMENT ON THE PREDICTABILITY OF 12 MICROMECHANICS MODELS FOR STIFFNESS AND STRENGTH OF UD COMPOSITES	Zheng-Ming Huang, Chun-Chun Zhang (Tongji University)	3627
3630	DESIGN AND DEVELOPMENT OF 100% BIO-BASED HIGH-GRADE HEMP/EPOXY COMPOSITES	C. François123, V. Placet2, Y. Gaillard2, S. Pourchet3, G. Boni3, L. Plasseraud3, P. Ouagne4, J. Samec5, S. Rautiainen5, L. Fournier6, C. Robert6, C. M. Thomas6 and S. Fontaine1  1 DRIVE EA1859, Univ. Bourgogne Franche-Comté, F-58000 Nevers, France, camille.francois@ubourgogne.fr, stephane.fontaine@u-bourgogne.fr, www.isat.fr	3630
3673	BASALT FIBER WITH PYROLYTIC CARBON COATING FOR SENSORY APPLICATIONS	Bin Hao, Peng-Cheng Ma * 1 Laboratory of Environmental Science and Technology, The Xinjiang Technical Institute of Physics and Chemistry, Key Laboratory of Functional Materials and Devices for Special Environments, Chinese Academy of Sciences, Urumqi 830011, China.	3673
3682	IMPACT OF THERMAL LOADS ON THE DAMAGE ONSET OF FIBER REINFORCED PLASTICS	David Kraus, Volker Trappe (Federal Institute for Material Research and Testing (BAM))	3682
3699	Preparation of Carbon Fiber Sizing Agent on Different Types of Epoxy Resin	C. C. Ji, P. Li, X.P. Yang (Beijing University of Chemical Technology)	3699
3703	Preparation of carbon fiber sizing agent and characterization of its properties	Kun Ming Yang, Peng Li, Yun Ping Zhang (Beijing University of Chemical Technology)	3703
3713	SHORT FIBER REINFORCED COMPOSITE MATERIALS MECHANICAL PERFORMANCE ANALYSIS	Li Xiang (Beihang University)	3713
3721	MECHANICAL BEHAVIOUR OF GLASS FIBRE REINFORCED THERMOPLASTIC TAPES MADE OF RECYCLED POLYMERS	F. Regel (Saxion University of Applied Sciences), N. Claussnitzer (Saxion University of Applied Sciences, Chemnitz University of Technology), F.W.J. van Hattum (Saxion University of Applied Sciences)	3721
3772	M55J Carbon Fiber/Cyanate Ester Composites’ Properties and Application	SHI Peiluo*, BAI Xuelian, FU Pingjun, LING Hui, JIANG Wenge Aerospace Research Institute of Materials and Processing Technology Beijing, China Email: shipeiluo@163.com Tel.: +86 135 2207 8703	3772
3809	ORIENTATION, DISPERSION AND LENGTH REDUCTION OF FIBRES IN LONG GLASS FIBRE REINFORCED INJECTION MOULDING	Phil Caton-Rose (University of Bradford), Millan-John Gilson (University of Bradford), Peter Hine (University of Leeds)	3809
3833	Study on the interfacial properties of carbon fiber/epoxy composites under the hygrothermal condition	Shu Xiong, Xinyan Zang, Kaiwen Wu, Yan Zhao (Beihang University)	3833
3853	Effect of Heterogeneity at the FiberMatrix Scale on Predicted Free-Edge Stresses for a [0/90]s Laminated Composite	M. Keith Ballard, John D. Whitcomb	3853
3877	Synergetic Effects of Thin Ply and Nanostitching Studied by Synchrotron Radiation Computed Tomography	Estelle Kalfon-Cohen (Massachusetts Institute of Technology), Reed Kopp (Massachusetts Institute of Technology), Xinchen Ni(Massachusetts Institute of Technology), Nathan Fritz(Massachusetts Institute of Technology), Albertino Arteiro (University of Porto), Gregor Borstnar (University of Southampto), Mark N. Mavrogordato (University of Southampto), S. Mark Spearing (University of Southampto), Pedro P. Camanho (University of Porto), Brian L. Wardle(Massachusetts Institute of Technology)	3877
3918	MONITORING THE DELAMINATION OF LAMINATED STRUCTURES BY USING CNT BUCKYPAPER	L. Liu, L. L. Shen (Tongji University)	3918
3927	The effects of fiber waviness on the stiffness of composite laminates	Wen-Hao Zeng, Peng He, Guo-Feng Chen, Yong-Tai Yang (Chinese Academy of Sciences)	3927
3939	MIRRORS FABRICATED BY ALL CFRP COMPOSITES AND THEIR DIMENSIONAL STABILITY IN AIR	Y J Wang, L Xu, J T Ding, YJ Xie, Z Ma (Xi’an Institute of Optics and Precision Mechanics of Cas)	3939
3945	THERMAL BUCKLING ANALYSIS OF VARIABLE ANGLE TOW COMPOSITE PLATES	Fei Li, Guojun Nie (Tongji University)	3945
3950	A STUDY ON THE PROCESSING ABILITY OF CARBON FIBER REINFORCED THERMOPLASTIC EPOXY RESIN COMPOSITES BY USING PULTRUSION TECHNIQUE	Wongsriraksa Patcharat, Nakai Asami (Gifu University)	3950
3997	MODIFICATION OF CHEMICALLY STABLE POLYMERIC MATERIALS 87. IMPROVEMENT IN THE ADHESION PROPERTY OF FRP, CFRP, AND CFRTP FOR CAR/AIRCRAFT-USE.	Hitoshi Kanazawa, Aya Inada (FUnited Kingdomushima University)	3997
3999	COMPRESSIVE MECHANICS AND FAILURE MECHANISM FOR UHMWPE FIBER REINFORCED COMPOSITE LAMINATES UNDER HYGROTHERMAL ENVIRONMENT	Zhu Libao, Li Yongqing, Zhu Xi, Zhu Zixu (Naval University of Engineering)	3999
4002	MECHANICAL BEHAVIOR OF CARBON/STEEL HYBRID FIBER-REINFORCED COMPOSITES	Minchang Sung, Woong-Ryeol Yu (Seoul National University)	4002
4004	THE EFFECT OF VOIDS ON TRANSVERSE CRACKING IN COMPOSITE LAMINATES AS REVEALED BY COMBINED COMPUTATIONAL ANALYSIS AT THE MICRO- AND MESO-LEVELS	Mahoor Mehdikhani (KU Leuven, SIM M3 program), Nikolay Petrov (SIM M3 program, Skolkovo Institute of Science and Technology), António R. Melro (University of Bristol), Stepan V. Lomov (KU Leuven, SIM M3 program, Skolkovo Institute of Science and Technology), Larissa Gorbatikh (KU Leuven, SIM M3 program, Skolkovo Institute of Science and Technology)	4004
4009	MANUFACTURING OF PRE-IMPREGNATED DISCONTINUOUS PAEK/CF COMPOSITE	Yuan Wang, LUnited Kingdome Savage (University of Exeter)	4009
4010	Loading Rate and Temperature Dependence of Flexural Behaviour  of GFPP Fabricated by Injection Molding Method	Lichao YU1, Zhenjin CUI2, Xiaofei YAN3, Shinji NOJIMA4, Yuqiu YANG5,  Hiroyuki Hamada6.  1Biobased Materials Science, Kyoto Institute of Technology Matsugasaki, Sakyo-ku, Kyoto, 606-8585, Japan Email: yulichao123@163.com, web page: http://www.kit.ac.jp/	4010
4039	EFFECT OF SPRINGBACK RATIO ON BENDING AND IMPACT PROPERTY OF CARBON FIBER REINFORCED THERMOPLASTICS SANDWICH STRUCTURES	Yunqian Zhang, Yi Wan, Taro Nakamura, Jun Takahashi (The University of Tokyo)	4039
4059	THE EFFECT OF PLY SCHEME ON THERMAL CONDUCTION OF FIBER REINFORCED POLYMER COMPOSITES	Zenong Fang, Min Li, Shaokai Wang, Yizhuo Gu, Yanxia Li, Zuoguang Zhang (Beihang University)	4059
4107	BIAS EXTENSION MEASUREMENTS ON CROSS-PLIED UNIDIRECTIONAL THERMOSET PREPREG	Y.Q. Zhao, T. Zhang, B.M. Zhang (Beihang University)	4107
4111	CHARACTERIZATION OF THROUGH-THICKNESS THERMAL CONDUCTIVITY OF WIND TURBINE BLADE CFRP MATERIALS USING A STEADY-STATE TECHNIQUE	E.C. Senis, I.O. Golosnoy, J. Dulieu-Barton, O.T. Thomsen (University of Southampton), S.F. Madsen (Global Lightning Protection Services A/S)	4111
4141	Damage Tolerance of Carbon/Epoxy Quasi-Interwoven Composites Subjected to Low Velocity Impacts	B.V. Waddington, A. Silva-Caballero, P. Potluri, W.R. Kennon (University of Manchester)	4141
4145	EFFECT OF PRE-EXISTING MICROSTRUCTURAL DEFECTS ON ELASTIC AND FRACTURE PROPERTIES OF COMPOSITES	Sathiskumar A PonnUnited States of Americami (University of Oxford, Delft University of Technology), Mehtab V Pathan (University of Oxford, Imperial College London), Nik Petrinic (University of Oxford)	4145
4201	Molding Process optimization of a fast curing epoxy resin prepreg with long time storage at room temperature	Jia Li, Baoyan Zhang, Fenghui Shi, Jiajun Gui, Zhaodan Ma (AVIC Composite Co. Ltd)	4201
4214	Surface functionalized CNTs grafted short carbon fibers in CFRP composites as interleaving toughener and damage sensor	Xusheng Du (Jinan University, The University of Sydney), Helezi Zhou (The University of Sydney, Huazhong University Science and Technology), Hong-Yuan Liu (The University of Sydney), Huamin Zhou (Huazhong University Science and Technology), Yiu-Wing Mai (The University of Sydney)	4214
4226	EFFECTS OF MICRO-DEFECTS ON THE MECHANICAL PROPERTIES OF CBCFS CARBON-BONDED CARBON FIBER COMPOSITES	Yao Zhang, Zixing Lu, Zhenyu Yang (Beihang University)	4226
4293	SIMULATION OF FIBER ALIGNMENT DURING THE INJECTION MOLDING PROCESS BY USING SHORT CARBON FIBER AND PDMS MIXTURE	Dong-Wook Oh, Jun Yub Park (Chosun University)	4293
4328	CHARACTERIZATION OF TRIBOLUMINESCENT ENHANCED GLASS FIBER COMPOSITES MANUFACTURED VIA DISPLACED FOAM DISPERSION TECHNIQUE	Chelsea E. Armbrister1, Md Abu S. Shohag2 and Okenwa I. Okoli3 1 High-Performance Materials Institute, FAMU-FSU College of Engineering 2525 Pottsdamer St., Tallahassee, Florida 32310, chelsea1.armbrister@famu.edu 2 High-Performance Materials Institute, FAMU-FSU College of Engineering 2525 Pottsdamer St., Tallahassee, Florida 32310, mss14d@my.fsu.edu 3 High-Performance Materials Institute, FAMU-FSU College of Engineering 2525 Pottsdamer St., Tallahassee, Florida 32310, okoli@eng.famu.fsu.edu, http://www.eng.famu.fsu.edu/~okoli/	4328
4393	CARBON NANOTUBE FILM ENGINEERED FIBER REINFORCED POLYMER COMPOSITES	Xiaokui Xu, Shuxuan Qu, Yuan Zhang, Yongyi Zhang, Qingwen Li, Weibang Lu (Suzhou Institute of Nano-Tech and Nano-Bionics)	4393
4401	EXPERIMENTAL STUDY ON THE PERFORMANCE OF TWISTED FIBER REINFORCED Z-PINS	Xiangyang Zhang, Yong Li, Qiyi Chu, Jun Xiao (Nanjing University of Aeronautics and Astronautics)	4401
4409	Effect of temperature and moisture on mechanical properties of a woven and short fibre thermoplastic composites for load-bearing automotive parts	Réda Ourahmoune, Michelle Salvia, Jérôme Laborde (Ecole Centrale de Lyon)	4409
4434	EXPERIMENT STUDIES AND NUMERICAL SIMULATION OF COMPOSITE LAMINATES OPENING PLATES WITH ASYMMETRIC REINFORCEMENT	ZHENG Quan, YANG Yanzhi, LIN Renbang Aerospace System Engineering Shanghai, Shanghai 201109, China	4434
4455	Thermal damage characteristics of CFRP laminates subjected to lightning strike	Yunli Guo, Yuxi Jia (Shandong University)	4455
4461	SIMULATION ON DAMAGE IN QUASI-ISOTROPIC UNIDIRECTIONALLY ARRAYED CHOPPED STRANDS LAMINATES UNDER OPEN-HOLE TENSION	Jun Feng Hu (Nanjing Tech University), Xiang Ling (Nanjing Tech University), Hang Li (Hunan University), Wen Xue Wang (Kyushu University)	4461
4478	Microwave and conventional sintering of SiC/SiC composites: Fracture behaviors and microstructures	Mingyuan Li, Huiyong Yang, Xingui Zhou (National University of Defense Technology)	4478
4497	MANUFACTURE AND CHARACTERIZATION OF CF-CNT PAPER REINFORCED EPOXY COMPOSITES BY RESIN INFUSION METHOD	Da Hee Choi (Korea Institute of Industrial Technology(KITECH), Hanyang University), Do Hyung Park (Korea Institute of Industrial Technology(KITECH)), Bong-Sang Cho (Korea Institute of Industrial Technology(KITECH)), Tae Hee Han (Hanyang University), Ki-Young Kim (Korea Institute of Industrial Technology(KITECH))	4497
4503	COMPARISON OF FIBER ORIENTATION ANALYSIS METHODS IN FIBER-REINFORCED COMPOSITES	Eric Ho (Thermo Fisher Scientific)	4503
4522	Dynamic Properties Of Thermal Curing Fiber/Epoxy Supporting Boom	Jianzheng Wei, Ding Haixin, Jianxin Yu, Tan Huifeng (Harbin Institute of Technology)	4522
4524	Preparation and interfacial property of graphene oxide/BPEI/carbon fiber hierarchical reinforcement	Wang Due (Harbin Institute of Technologe)	4524
4527	A NOVEL COHESIVE MODEL FOR SIMULATING DELAMINATION PROPAGATION IN COMPOSITE LAMINATED STRUCTURES	Ning Hu, Huiming Ning (Chongqing University)	4527
4528	Mechanical properties at cryogenic temperature of multi-scale nano-carbon/micro-fiber reinforced epoxy composites	Jian Qian (Chongqing University), Bao-Gang Sun (Chongqing University), Yuan-Qing Li (Chongqing University), Cheng-Bin Qu (Chinese Academy of Sciences), Hong-Mei Xiao (Chinese Academy of Sciences), Shao-Yun Fu (Chongqing University, Chinese Academy of Sciences)	4528
4557	The Variability Control of some CFRP Materials by Nested Method	Bo Li, Lin Chen, Ye Zhang, Chuanjun Liu (Beijing Aeronautical Science & Technology Research Institute of COMAC)	4557
4558	THE SIZING AGENT FOR CARBON FIBER STRAND REINFORCING THERMOPLASTIC RESINS	Lei Wu, Kunming Yang, P. L, X.P. Yang (Beijing University of Chemical Technology)	4558
4567	CHARACTERIZATION OF THE INTERFACIAL BONDING AT SOLID/MELT INTERFACES IN MULTIPHASE CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITES	M. Ali Aravand (Queen's University Belfast, Northern Ireland Advanced Composite and Engineering (NIACE)), Brian G. Falzon (Queen's University Belfast, Northern Ireland Advanced Composite and Engineering (NIACE))	4567
4577	ON THE STOKES-BRINKMAN COUPLING WITH ANISOTROPIC NAVIER SLIP AND EFFECTIVE VISCOSITY FOR FLOW SIMULATIONS IN DUAL-SCALE FIBROUS POROUS MEDIA	Jingang Lu and Wook Ryol Hwang*  School of Mechanical Engineering, Research Centre for Aircraft Parts Technology (ReCAPT), Gyeongsang National University, Jinju, 52828, Korea	4577
4593	STUDY ON THE RHEOLOGY AND TENSILE PROPERTY OF CCF300PEEK COMPOSITES VIA POWDER IMPREGNATION METHOD	Xuekuan Li (Beihang University)	4593
4623	Three Dimensional Modeling and Progressive Damage Analysis of Fiber Reinforced Composites	S.Z.H Shah, Chao Zhao, Yong-joo Cho, Sung Kyu Ha (Hanyang Graduate School)	4623
4641	ALL-ARAMID COMPOSITES: THE MORPHOLOGY, MECHANICAL PROPERTIES AND CRYSTALLIZATION	Jian Min Zhang (Qingdao University), Zeinab Mousavi (Queen Mary University of London), Nattkan Soykeabkaew (Mae Fah Luang University), Ton Peijs (Queen Mary University of London)	4641
4644	NUMERICAL SIMULATION OF DAMAGE PROPAGATION FOR A CHANNEL STRUCTURE MADE OF SHORT GLASS FIBER REINFORCED COMPOSITES	Xingsheng Li (Osaka University), T.Kurashiki (Osaka University), M.Zako (Osaka University), K.Kobayashi (ITOCHU Techno-Solutions Corp.), T.Yamamoto (ITOCHU Techno-Solutions Corp.), T.Sakakibara (ITOCHU Techno-Solutions Corp.)	4644
4649	Properties analysis of composite materials for the manufacture of space mirror	Zhiyong Yang1, 2*, Qin Lei2, Lingying Pan2, Zhanwen Tang2, Yongjie Xie3, Boming Zhang1, Jianbo Sun2, Xijun He2 1. School of Material Science and Engineering, Beihang University, Beijing 100191, China; 2. Aerospace Research Institute of Materials & Processing Technology, Beijing 100076, China; 3. Xi’an institute of optics & precision Mechanics, Chinese academy of sciences, Xi’an 710068, China (*)Email: yzy512007@163.com	4649
4693	STUDY ON THE RHEOLOGY AND TENSILE PROPERTY OF CCF300/PEEK COMPOSITES VIA POWDER IMPREGNATION METHOD	Xuekuan Li1, Yan Zhao1* and Kai Wang1, Junlin Chen1 and Wenkuo Lu1 1 School of Materials Science and Engineering, Beihang University, Beijing 100191, China	4693
4659	Mechanical properties and microstructure of cellulose nanofiber (CNF) reinforced epoxy	Xudong Wang, K. Hanaki, T. Kurashiki, K. MUnited Kingdomoyama, Xingsheng Li (Osaka University)	4659
Theme 1 Materials Science
1.9 Track Textile-Based Composites
Paper ID	Full Paper Title	Author	Paper ID
2829	Constitutive modelling of the hysteretical behavior of textile composites under large strain	Yvan Denis, Nahiene Hamila, Julien Colmars, Fabrice Morestin, Philippe Boisse (Institut National des Sciences Appliquées de Lyon (INSA))	2829
2845	Predicting the Elastic Modulus of 3D Braided Composite Tubes Using Geometrical Mapping Approach	Yi-bo Wang, Zhen-guo Liu, Long Hu, Zhe Wu (Beihang University(BUAA))	2845
2916	Unit cells for thermal conduction calculation of textile reinforced composites	Jian-Jun Gou (Xi’an Jiaotong University), Xing-Jie Ren (Xi’an Jiaotong University), Shuguang Li (University of Nottingham), Wen-Quan Tao (Xi’an Jiaotong University)	2916
2922	FATIGUE LIMIT: IS THERE A LINK TO THE QUASI-STATIC DAMAGE?	Stepan V. Lomov (KU Leuven), Valter Carvelli (Polytechnic University of Milan), Atul Jain (Indian Institute of Technology)	2922
3016	DYNAMIC IN-PLANE DAMAGE AND FAILURE OF ANGLEINTERLOCK WOVEN COMPOSITE MATERIAL	Zhongxiang Pan1, Bohong Gu2, Baozhong Sun 2 and Jie Xiong1  1 College of Materials & Textiles, Zhejiang Sci-Tech University, Hangzhou, 310018, China, panzx@zstu.edu.cn, jxiong@zstu.edu.cn 2 College of Textiles, Donghua University, Shanghai, 201620, China, gubh@dhu.edu.cn, sunbz@dhu.edu.cn	3016
3038	MULTISCALE MODELLING OF TEXTILE COMPOSITES STRUCTURES USING MECHANICS OF STRUCTURE GENOME	Xin Liu, Khizar Rouf and Wenbin Yu (Purdue University)	3038
3045	modelling biaxial-tension coupling in woven fabric	Yuan Yao, Gong Youkun, Xiongqi Peng, Xiaoshuang Huang (Shanghai Jiao Tong University)	3045
3058	A shell approach for textile composite forming simulations	B. Liang, J. Colmars, P. Boisse (University of Lyon)	3058
3081	EFFECT OF SURFACE BRAIDED ANGLE ON VIBRATION MODAL OF A NOVEL THREEDIMENSION AND FOUR-DIRECTION BRAIDED COMPOSITE T-BEAM	Xiaoyuan Pei 1, 2, 3, Huan Wang 1, Li Chen 1, Jialu Li 1, 2, *, Youhong Tang 3, *  1 Composites Research Institute and Education Ministry Key Laboratory of Advanced Textile Composite Materials, Tianjin Polytechnic University, Tianjin 300160, China. 2 School of Material Science and Engineering and State Key Laboratory of Separation Membranes and Membrane Processes, Tianjin Polytechnic University, Tianjin 300387, China. 3 Institute of NanoScale Science & Technology, Flinders University, South Australia 5042, Australia.  *Corresponding authors: Tel.: +86 22 24528052, E-mail address: lijialu@tjpu.edu.cn (J Li) and Tel.: +61 8 82012128, E-mail: youhong.tang@flinders.edu.au (Y Tang).	3081
3086	EXPERIMENTALSTUDYONTHELOWVELOCITYIMPACT RESPONSEOF CARBON-ARAMID HYBRIDBRAIDED COMPOSITES	SunYing 1,TianShuquan 1,TangMengyun 1,RongZhijun 1,ChenLi 1 1 KeyLaboratoryofAdvancedTextileComposites(MinistryofEducationandTianjin),Instituteof TextileComposites,TianjinPolytechnicUniversity BinShuiXiRoad399,XiqingDistrict,Tianjin300387,China Email:sunying@tjpu.edu.cn	3086
3098	Experimental Investigation of the Vibration Properties of 3D Braided Composites	Dong Apeng, Li Shu, Pu Jing (Beijing University of Aeronautics and Astronautics)	3098
3139	Analysis of Three-Dimensional Woven Composites	M. Keith Ballard, J. Scott McQuien, John D. Whitcomb	3139
3203	CARBON PLAIN WEAVE TEXTILE REINFORCED EPOXY MODIFIED WITH CELLULOSE NANO FIBERS: EFFECT OF CNF LENGTH	Valter Carvelli (Polytechnic University of Milan), Aya Tanaka (Doshisha University), Toru Fujii (Doshisha University), Kazuya Okubo (Doshisha University)	3203
3347	TIME DEPENDENT DEFORMATION BEHAVIOR OF ADAPTIVE FIBER REINFORCED PLASTICS	Moniruddoza Ashir1, Jan Hindahl2, Andreas Nocke3 and Chokri Cherif4   1 Technische Universität Dresden, Faculty of Mechanical Science and Engineering, Institute of Textile Machinery and High Performance Material Technology, 01069 Dresden, Germany (Moniruddoza.ashir@tu-dresden.de, https://tu-dresden.de/ing/maschinenwesen/itm)	3347
3355	A Comparative Study on Mechanical Properties of Surface Modified Polypropylene (PP) Fabric Reinforced Concrete Composites	Guyu Feng 1, 2, Diantang Zhang 1, 2, Xinyue Wang 1, 2, Haijian Cao 1, 2, Kun Qian 1, 2*, Xueliang Xiao 1, 2 1Key Laboratory of Science and Technology of Eco-Textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China 2College of Textile & Clothing, Jiangnan University, Wuxi 214122, China	3355
3368	Experimental investigation of the tufted 3-Dimensional composite reinforcement forming	Peng Wang , Xavier Legrand, Damien Soulat, Lingshan Liu, Matthieu Tricaud (University of Lille)	3368
3387	The mechanical response of braided composite tube under three points bending loading-1	Zhenyu Wu (Zhejiang SCI-Tech University)	3387
3388	A PERMEABILITY COMPUTATIONAL MODEL BASED ON MESO-SCALE GEOMETRY: CONSIDERING COMPACTION DEFORMATION OF PREFORM	Jianjun Jiang1, Xing Chen1, Guoli Deng1 1 Shaanxi Engineering Research Center for Digital Manufacturing Technology, Northwestern Polytechnical University, Xi’an 710072, P.R. China, jianjun@nwpu.edu.cn	3388
3462	STUDY ON GAS PERMEATION CHARACTERISTICS OF 3D BRAIDED SEAL	Jiao Yanan, Jing Yuanyuan, Zhang Shihao (Tianjin Polytechnic University)	3462
3479	The In-Plane Mechanical Properties of 2.5D Woven Polymeric Matrix Composites	W. Kong (AECC Commercial Aircraft Engine CO.LTD, University of Nottingham), R. Brooks (University of Nottingham), E. Sitnikova (University of Nottingham), X. Zhao (AECC Commercial Aircraft Engine CO.LTD, University of Nottingham), Q. Pan (AECC Commercial Aircraft Engine CO.LTD, University of Nottingham), T. Yu (AECC Commercial Aircraft Engine CO.LTD, University of Nottingham), S. Li (University of Nottingham)	3479
3572	Fibre waviness induced bending in compression tests of unidirectional NCF composites	Dennis Wilhelmsson (Chalmers University of Technology), Leif E. Asp (Chalmers University of Technology), Renaud Gutkin (Durability CAE Body & Trim, Volvo Car Corporation), Fredrik Edgren (GKN Aerospace Sweden AB)	3572
3616	EFFECTS OF YARN PATH AND SUB-UNIT CELLS ON THE CHARACTERIZATION OF MECHANICAL PROPERTIES OF 3D BRAIDED COMPOSITE MATERIALS	Aldrich, D.; Ayranci, C. (University of Alberta)	3616
3628	FORMABLE NANOCOMPOSITE MEMBRANES FOR ENERGY RECOVERY VENTILATORS	Taesik Chae (University of British Columbia), Ryan Huizing (University of British Columbia, dPoint Technologies Inc), Frank Ko (University of British Columbia)	3628
3649	CARBON FIBER TEXTILE COMPOSITES USING HIGHLY-POLYMERIZED THERMOPLASTIC EPOXY: EFFECT OF MOLECULAR WEIGHT OF EPOXY ON THE MECHANICAL PERFORMANCE OF COMPOSITES	Hironori Nishida, KeisUnited Kingdome Nagai, Souichirou Imagawa, Kazuya Okubo, Toru Fujii (Doshisha University), Valter Carvelli (Polytechnic University of Milan)	3649
3716	Scaling Effects in the Low Velocity Impact Response of CFRP Laminates	Z.W. Xu (University of Liverpool), F.J. Yang (University of Liverpool), Z.W. Guan (University of Liverpool, South China University of Technology), W.J. Cantwell (Khalifa University)	3716
4072	NOVEL PREFORM WITH SELF-BONDING LAYERS	Qianqian Fang, Li Chen, Dong Chen (Tianjin Polytechnic University)	4072
4162	INFLUENCE OF 3D WEAVING PARAMETERS ON PREFORM COMPRESSION AND LAMINATE MECHANICAL PROPERTIES	D. Patel, V. Koncherry, Z. YoUnited States of Americaf, P. Potluri (University of Manchester)	4162
4198	IN-PLANE SHEAR PROPERTIES OF MULTIAXIAL 3D WOVEN COMPOSITE	Xinmiao Wang, Ling Cheng, Li Chen, Hui Guo (Tianjin Polytechnic University)	4198
4215	A PROPOSAL OF CONVENTIONAL FE-MODELING FOR LAYERED BRAIDED COMPOSITES	Takuya Yamamoto (Itochu-Techno Solutions Corporation (CTC)), Aki Imaoku (Itochu-Techno Solutions Corporation (CTC)), Tatsuo Sakakibara (Itochu-Techno Solutions Corporation (CTC)), Masaru Zako (Osaka University)	4215
4230	ON THE MESO-MECHANICAL MODELING METHOD FOR TEXTILE COMPOSITES	Chao Zhang (Northwestern Polytechnical University)	4230
4291	Effect of Processing Conditions on the Properties of Hybrid Lignin/PAN Carbon Nanofibers	L. Song1, A. Bahi1, L.T. Lin1, A.P. Dodd2, S.K. Straus2, and F.K. Ko1 1Advanced Fibrous Materials Laboratory, Department of Materials Engineering , The University of British Columbia, 309-6350 Stores Road, Vancouver, B.C., Canada V6T 1Z4 2Department of Chemistry, The University of British Columbia, 2036 Main Mall, Vancouver, B.C., Canada V6T 1Z1	4291
4399	Effect of Warp Knitting Condition on Mechanical Properties of Non-Crimp Fabric Reinforced Composites	Yuya Yamasaki, MasayUnited Kingdomi Kitamura, Akio Ohtani, Asami Nakai	4399
4412	DESIGN OPTIMISATION OF 3D WOVEN T-JOINT REINFORCEMENTS	Shibo Yan, Andrew Long, Xuesen Zeng (University of Nottingham)	4412
4456	FABRICATION OF Pd-SIOC NANOFIBER WITH EXCELLENT MECHANICAL PROPERTY	Nan Wu (National University of Defense Technology), Yingde Wang (National University of Defense Technology), Frank Ko (University of British Columbia)	4456
4490	EXPERIMENTAL INVESTIGATION ON OFF-AXIS TENSILE INITIAL FRACTURE BEHAVIOUR OF GLASS PLAIN FABRIC/UNSATURATED POLYMER (UP) COMPOSITES	Defang Zhao (Kyoto Institute of Technology), Zhilan Xu (Kyoto Institute of Technology), Kai Mao (Kyoto Institute of Technology), Yuqiu Yang (Donghua University), Hiroyuki Hamada (Kyoto Institute of Technology)	4490
4548	NEW FRONTIERS FOR TEXTILE STRUCTURAL COMPOSITES	Frank K. Ko, Lynn Y. Wan (University of British Columbia)	4548
4664	A Comparative Research on The Processability of Glass Woven Fabric Prepreg	Hansong Liu, Xiaoran Zhao, Ming Gong, Yan Zhao (Beihang University)	4664
Theme 1 Materials Science
1.10 Track Hybrid Composites
Paper ID	Full Paper Title	Author	Paper ID
2879	Finite Element Modeling and Failure Analysis of Roll Bending Forming of GLARE Laminates	Jingming Tian, Gang Tao, Cheng Liu, Huaguan Li, Xian Zhang, Jie Tao (Nanjing University of Aeronautics and Astronautics)	2879
1586	THE SYNTHESIS OF POLYURETHANE MICROCAPSULES AND EVALUATION OF SELF-HEALING PAINT PROTECTION PROPERTIES	Sooyoul Park (Korea Research Institute of Chemical Technology), Eunjoo Koh (Kyung Hee University)	1586
2753	The study on the ballistic performance and failure mechanism of UHMWPE-Aramid1414 fiber hybrid composites	Zhou Qing1, He Yemao1, Liu Ting1 1Beijing Protech New Material Science Co. Ltd, Beijing 102200; johnnyzhou@chn-protech.com; http://www.chn-protech.com/	2753
2915	Hybridisation of CFRP with endless metal fibres for multifunctional structures	Hannemann, Benedikt (Institute for Composite Materials (IVW GmbH)); Schmeer, Sebastian (Institute for Composite Materials (IVW GmbH)); Breuer, Ulf Paul (Institute for Composite Materials (IVW GmbH)); Backe, Sebastian (University of Kaiserslautern); Balle, Frank (University of Kaiserslautern)	2915
2951	The study on the ballistic performance and failure mechanism of UHMWPE-Aramid1414 fiber hybrid composites	Zhou Qing, He Yemao, Liu Ting (Beijing Protech New Material Science Co. Ltd)	2951
2966	TITANIUM BUTYL-PHOSPHATE GRAFTED MESOPOROUS SILICA HYBRID COMPOSITE FOR RARE EARTH SEPARATION	Wenzhong Zhang (University of Helsinki), Dzenita Avdibegovic (KU Leuven), Risto Koivula (University of Helsinki), Koen Binnemans (KU Leuven), Risto Harjula (University of Helsinki)	2966
3130	CELLULOSE NANOMATERIALS AND BASALT FIBRES: AN APPROACH TOWARDS LIGHT- WEIGHTING IN SHEET MOULDING COMPOUNDS	Amir Asadi1, Ferdinand Baaij2, Robert J. Moon3 and Kyriaki Kalaitzidou4 1 G.W. Woodruff School of Mechanical Engineering – Georgia Institute of Technology, Atlanta, GA 30332, United States, amir.asadi@me.gatech.edu 2 G.W. Woodruff School of Mechanical Engineering – Georgia Institute of Technology, Atlanta, GA 30332, United States, ferdinand.baaij@gatech.edu 3 The Forest Products Laboratory, U.S. Forest Service, Madison, Wisconsin 53726, United States and School of Materials Science and Engineering – Georgia Institute of Technology, Atlanta, GA 30332, United States, robertmoon@fs.fed.us 4 .W. Woodruff School of Mechanical Engineering and School of Materials Science and Engineering – Georgia Institute of Technology, Atlanta, GA 30332, United States, kyriaki.kalaitzidou@me.gatech.edu	3130
3062	Compressive property reinforcement of unidirectional FRP by filament cover method	Fangtao Ruan, Zhenzhen Xu, Li Yang, Wei Li (Anhui Polytechnic University)	3062
3228	A RFI PROCESSING OF MULTI-SCALE REINFORCEMENT FOR SURFACE PROTECTION OF CFRP	Ben Wang, Yugang Duan, Jingjing Zhang, Xueling Yao (Xi’an Jiaotong University)	3228
3237	ENHANCEMENT OF INTERLAMINAR FRACTURE TOUGHNESS AND DAMAGE MECHANISMS ANALYSIS IN CFRPS REINFORCED WITH SPRAYED NANO PARTICLES	Huiyong He, Xin Liu, Zhanjun Wu (Dalian University of Technology)	3237
3242	The effect of interaction between titanium alloy and CFRP on the interface damage in cutting Ti/CFRP stack composite	Chen Chen, Zhenyuan Jia, Fuji Wang, Bin Niu, Fan Yang, Guangjian Bi (Dalian University of Technology)	3242
3298	Effect of carbon nanotube addition on the interface property of titanium-based fiber metal laminates	Xian Zhang, Yubing Hu, Jingming Tian, Jie Tao (Nanjing University of Aeronautics and Astronautics)	3298
3299	The Shot Peen Forming of Fiber Metal Laminates based on the Aluminum-lithium Alloy	Huaguan Li (Nanjing Institute of Technology), Wei Zhang (Xi'an Aircraft Industry Company LTD), Wei Jiang (Xi'an Aircraft Industry Company LTD), Xunzhong Guo (Nanjing University of Aeronautics and Astronautics), Yubing Hu (Nanjing University of Aeronautics and Astronautics), Xuelong Fu (Nanjing University of Aeronautics and Astronautics), Jie Tao (Nanjing University of Aeronautics and Astronautics)	3299
3300	Preparation and properties of Ti/CF/PMR Polyimide Laminates	Jie Tao, Yubing Hu, Huaguan Li, Xuelong Fu, Xian Zhang, Lei Pan (Nanjing University of Aeronautics and Astronautics)	3300
3301	Fatigue crack growth of Ti/Cf/PMR polyimide laminates under variable amplitude loading	Lin Yanyan (NanJing University of Aeronautics and Astronautics)	3301
3302	Influence of PTFE Fiber Content on the Tribological Properties of Hybrid Kevlar/PTFE Fabric Self-Lubricating Composites	Yingyi Liu, Dongxing Zhang (Harbin Institute of Technology)	3302
3435	Tensile Modulus of Glass Fiber/Carbon Fiber Reinforced Polypropylene Hybrid Composites Fabricated by Vented Injection Molding	Xiaofei Yan (Kyoto Institute of Technology), Lichao Yu (Kyoto Institute of Technology), Akihiko Imajo (Kyoto Institute of Technology), Akio Kataoka (Nihon YUnited Kingdomi Co., Ltd.), HiroyUnited Kingdomi Hamada (Kyoto Institute of Technology), Yuqiu Yang (Donghua University)	3435
3540	Influence of Processing Temperatures on the Deflection of Hybrid-Metal-Carbon Composites made by Resin Transfer Moulding	Patrick Hergan, Julia Beter, Steffen Stelzer, Ewald Fauster, Ralf Schledjewski (Montanuniversität Leoben)	3540
3541	Development and Characterization of a Composite Material made up by Glass Fiber Reinforced Plastics and High Strength Steel	A. Busch, R. Brandt (University of Siegen)	3541
3554	Polymer nanocomposites based on reactive blends of PETG-block-PTMO containing hybrid system of nanofillers	Sandra Paszkiewicz1*, Elżbieta Piesowicz1, Izabela Irska1, Daria Pawlikowska1, Anna Szymczyk2, Zbigniew Rosłaniec1, *corresponding authors: sandra.paszkiewicz@zut.edu.pl 1West Pomeranian University of Technology, Institute of Materials Science and Engineering, Szczecin, Poland 2 West Pomeranian University of Technology, Institute of Physics, Szczecin, Poland	3554
3586	EFFECTS OF ELECTROPHORETICALLY DEPOSITED GRAPHENE OXIDE ON THE SURFACE OF TA2 ON THE BONDING STRENGTH OF TI/PEEK	Yunfei Lv, Lei Pan, Zengmin Zheng, Aamir Ali, Nipon Roy (Nanjing University of Aeronautics and Astronautics)	3586
3779	Polymer nanocomposites based on reactive blends of PETG-block-PTMO containing hybrid system of nanofillers	Sandra Paszkiewicz, Elżbieta Piesowicz, Izabela Irska, Daria Pawlikowska, Anna Szymczyk, Zbigniew Rosłaniec (West Pomeranian University of Technology)	3779
3795	MATERIALS SELECTION FOR A FIBER-METAL-LAMINATE WITH ELASTOMER INTERLAYERS	Matthias M. Stoll1, Kay A. Weidenmann2 1 Institute for Applied Materials IAM-WK, Karlsruhe Institute of Technology (KIT), Kaiserstraße 12, 76131, Karlsruhe, Germany E-Mail: Matthias.Stoll@kit.edu, Web Page: http://www.iam.kit.edu 2 E-Mail: Kay.Weidenmann@kit.edu	3795
3818	Exploring discontinuities and hybridization to design gradual failure in unidirectional carbon fiber self-reinforced polypropylene composites	Jun Tang (KU Leuven), Arya Aslani (KU Leuven), Yentl Swolfs (KU Leuven), Gianmaria Bullegas (Imperial College London), Silvestre T. Pinho (Imperial College London), Stepan V. Lomov (KU Leuven), Larissa Gorbatikh (KU Leuven)	3818
3921	A STUDY ON HYBRIDIZATION OF SPRINGBACKED CARBON FIBER REINFORCED THERMOPLASTICS	Daiki Kobayashi, Taro Nakamura, Yi Wan, Isamu Ohsawa, Jun Takahashi (The University of Tokyo)	3921
3975	Materials selection for a Fiber-Metal-Laminate with elastomer interlayers	Matthias M. Stoll, Kay A. Weidenmann (Karlsruhe Institute of Technology (KIT))	3975
4128	Joint Design of Continuous/Discontinuous Hybrid Carbon Fibre Composites	A.D. Evans, L.T. Harper, T.A. Turner, N.A. Warrior (University of Nottingham)	4128
4208	MITIGATING EDGE EFFECTS IN ADHESIVELY BONDED COMPOSITE TUBULAR LAP JOINTS UNDER AXIAL, PRESSURE AND TORSIONAL LOADING VIA STIFFNESS-TAILORING	M. A. Khan and S. Kumar Institute Centre for Energy (iEnergy) Department of Mechanical and Materials Engineering, Masdar Institute of Science and Technology, P.O. Box 54224, Abu Dhabi, UAE	4208
4264	Effect of molding condition on mechanical properties in injection and compression hybrid molding	Masahiro Funahashi 1, Kenya Morie 2, Asami Nakai 3, Masaki Ohishi 4  1 1-1 Yanagido, Gifu, 501-1193, Japan, GIFU University, w4524068@edu.gifu-u.ac.jp 2 1-1 Yanagido, Gifu, 501-1193, Japan, GIFU University, v3122031@edu.gifu-u.ac.jp 3 1-1 Yanagido, Gifu, 501-1193, Japan, GIFU University, nakai@gifu-u.ac.jp 4 1-16 Ogimachinakayama, Toyokawa, Aichi, 441-0201, Japan,  SATOH MACHINERY WORKS Co.,Ltd., m.ohishi@satoh-gr.co.jp	4264
4279	Hybrid Metacomposites with Double-negative Effects	Y. Luo (Zhejiang University), F.X. Qin (Zhejiang University), F. Scarpa (University of Bristol), M. Ipatov (Universidad del Pais Vasco), A. ZhUnited Kingdomov (Universidad del Pais Vasco), J. Carbonell (Universitat Politècnica de Valencia), H.X. Peng (Zhejiang University)	4279
4397	MULTI-SCALE HYBRID COMPOSITES: CARBON NANOTUBE FILM FORMATION ON NON-CONDUCTIVE FIBERS USING ELECTROPHORETIC DEPOSITION	Aris Mardirossian (University of Delaware), Sagar M. Doshi (University of Delaware), Andrew N. Rider (University of Delaware), Erik T. Thostenson (Fisherman’s Bend VIC)	4397
4476	Superior rheological and thermal properties of hybrid graphene and boron nitride epoxy nanocomposites at ultra low filler loading concentration	Mohammad Owais (National Center for Nanoscience and Technology, University of Chinese Academy of Science), Jun Zhao (National Center for Nanoscience and Technology), Abolhassan Imani (National Center for Nanoscience and Technology, University of Chinese Academy of Science), Zhong Zhang (National Center for Nanoscience and Technology)	4476
4514	THE USE OF 3D GRAPHENE NETWORKS FOR THE CREATION OF BIO-INSPIRED SELF-MONITORING TOUGH CERAMIC NANOCOMPOSITES	Olivier T. Picot1, Victoria G. Rocha2, Claudio Ferraro2, Na Ni2, Eleonora D’Elia2, Sylvain Meille3, Jerome Chevalier3, Theo Saunders1,4, Mike J. Reece1,4, Ton Peijs1,4, Eduardo Saiz2  1 School of Engineering and Materials Science, Queen Mary University of London, Mile End Road, London E1 4NS, UK 2 Department of Materials, Centre for Advanced Structural Ceramics, Imperial College London, London SW7 2AZ, UK  3 Université de Lyon, INSA Lyon, MATEIS CNRS UMR5510, F-69621 Villeurbanne, France  4 Nanoforce Technology Limited, Mile End Road, London, E14NS, UK	4514
4542	CONTROLLABLE SYNTHESIS OF ALIGNED CARBON NANOTUBE/ALUMINUM OXIDE HYBRID FIBERS BY ATOMIC LAYER DEPOSITION	Mingyang Li, Mei Zu Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, National University of Defense Technology, Changsha 410073, China	4542
4567	CHARACTERIZATION OF THE INTERFACIAL BONDING AT SOLID/MELT INTERFACES IN MULTIPHASE CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITES	M. Ali Aravand1 and Brian G. Falzon2 1 Northern Ireland Advanced Composite and Engineering (NIACE) Centre, Airport Road, Belfast, BT3 9DZ, United Kingdom, Email: m.aravand@qub.ac.uk, Web: http://www.niace-centre.org.uk 2 School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast, BT9 5AH, United Kingdom	4567
4477	Polybutadiene–Poly(styrene-co-4-vinylpyridine)-Based Supramolecular Shape Memory Elastomers Using Metal Coordination Interactions	Kiho Kim, Seokgyu Ryu, Jooheon Kim (Chung-Ang University)	4477
4513	FILTRATION EFFECTS OF GRAPHENE NANOPLATELETS IN LIQUID MOULDING OF COMPOSITES: PROBLEMS AND POSSIBLE SOLUTIONS	Han Zhang, Yi Liu, Arnaud Kernin, Emiliano Bilotti, Ton Peijs (Queen Mary University of London)	4513
Theme 1 Materials Science
1.11 Track Ductile and Pseudo-ductile Composites
Paper ID	Full Paper Title	Author	Paper ID
2828	Crack Arrest In Finger Jointed Thermoplastic PES Interleaved CFRC	David B. Anthony (Imperial College London), Omar R. Bacarreza Nogales (Imperial College London), Milo S.P. Shaffer (Imperial College London), Alexander Bismarck (Imperial College London, University of Vienna), Paul Robinson (Imperial College London), Soraia Pimenta (Imperial College London)	2828
2739	UD hybrid composite overload sensors	Tamas Rev, Gergely Czél, Meisam Jalalvand, Michael R. Wisnom (tamas.rev@bristol.ac.uk, g.czel@bristol.ac.uk, m.jalalvand@bristol.ac.uk, m.wisnom@bristol.ac.uk)	2739
3005	PSEUDO-DUCTILE BEHAVIOR OF GLASS/CARBON FIBER HYBRID COMPOSITE WITH CARBON/EPOXY PLATELETS	Ichenihi Amos, Wang Qingtao, Md. Hasan Ikbal, Li Wei (Donghua University)	3005
3455	DEMONSTRATION OF PSEUDO-DUCTILITY IN ALL FIBRE DIRECTIONS OF HIGH PERFORMANCE QUASI-ISOTROPIC THIN PLY CARBON/GLASS HYBRID COMPOSITES	Mohamad Fotouhi, Meisam Jalalvand, Michael R. Wisnom (University of Bristol)	3455
3517	DUCTILITY OF PLATELET COMPOSITES INSPIRED BY NACRE DESIGN	Anil R. Ravindran1, Raj B. Ladani2, Shuying Wu3, Adrian P. Mouritz4 and Chun H. Wang5 1 Sir Lawrence Wackett Aerospace Research Centre, School of Engineering, RMIT University, Melbourne, VIC 3001, Australia	3517
3653	Exploring the Use of Friction to Introduce Ductility in Composites	O. Bacarreza, S. Maidl, P. Robinson, M. S. P. Shaffer (Imperial College London)	3653
3657	Grouping similar fibre types in hybrid discontinuous composite materials	James Finley (Imperial College London), HaNa Yu (University of Bristol), Marco Longana (University of Bristol), Soraia Pimenta (Imperial College London), Milo S.P. Shaffer (Imperial College London)	3657
3674	Experimental investigation of ductile behaviour and damage mechanisms of woven composites under bending	Himayat Ullah, Vadim V. Silberschmidt (Loughborough University)	3674
3723	Combining the non-linearity of angle plies and fibre fragmentation in carbon fibre laminates under compressive loading	X. Wu, J.D. Fuller, M.R. Wisnom (University of Bristol)	3723
3725	Unidirectional hybrid composite overload sensors	Tamas Rev, Gergely Czél, Meisam Jalalvand, Michael R. Wisnom (University of Bristol)	3725
3887	Designing and prototyping a microstructure for CFRP inspired by the Strombus gigas shell	Riikka Ha ̈s ̈a, Silvestre T. Pinho (Imperial College London)	3887
3889	Investigation of the compression performance and failure mechanism of pseudo-ductile thin-ply hybrid composites	G. Czél (Budapest University of Technology and Economics, University of Bristol), P. Suwarta (University of Bristol), M. Jalalvand (University of Bristol), M. R. Wisnom (University of Bristol)	3889
3911	THREE-DIMENSIONAL SIMULATION OF PSEUDO-DUCTILE BEHAVIOR OF ANGLE-PLY AND CROSS ANGLE-PLY LAMINATES	Xi Deng*1, Wen-Xue Wang2, T. Matsubara2 1 Department of Aeronautics and Astronautics, Engineering School, Kyushu University, Motooka Nishi-ku Fukuoka 819-0395, Japan (* E-mail: dengxi147@outlook.com) 2 Research Institute for Applied Mechanics, Kyushu University, Kasuga, Fukuoka 816-8580, Japan	3911
3930	Ductility of platelet composites inspired by nacre design	Anil R. Ravindran (RMIT University), Raj B. Ladani (RMIT University), Shuying Wu (RMIT University), Adrian P. Mouritz (RMIT University), Chun H. Wang (RMIT University, University of New South Wales)	3930
4101	Pseudo ductility in quasi-isotropic CFRP through ply weakening	J. Sun, O. Bacarreza, P. Robinson (Imperial College London)	4101
4158	Fatigue Behaviour of Pseudo-Ductile Thin Ply Hybrid Composites	Putu Suwarta (University of Bristol), Mohamad Fotouhi (University of Bristol), Gergely Czel (Budapest University of Technology and Economics, University of Bristol), Michael R. Wisnom (University of Bristol)	4158
4254	Improving damage tolerance of carbon fibre laminates via bio-inspired micro-structural design	Silvestre T. Pinho, Gianmaria Bullegas, Marine Charrier, Soraia Pimenta (Imperial College London)	4254
4689	THREE-DIMENSIONAL SIMULATION OF PSEUDO-DUCTILE BEHAVIOR OF ANGLE-PLY AND CROSS ANGLE-PLY LAMINATES	XI Deng, Wen-Xue Wang, T. Matsubara (Kyushu University)	4689
Theme 2 Structural Design
2.1 Track Structural Analysis and Optimization
Paper ID	Full Paper Title	Author	Paper ID
2902	DAMAGED ALUMINUM PANEL REINFORCED BY COMPOSITE PATCHES UNDER SHEAR LOADS- A NUMERICAL AND EXPERIMENTAL INVESTIGATION	H. Abramovich , Y. Simanovsky (Technion)	2902
2741	A GENERAL COMPUTATIONAL FRAMEWORK FOR DESIGNING MORPHING STRUCTURES	R.M.J. Groh*, A. Pirrera Dept. Of Aerospace Engineering, University of Bristol, Bristol, UK, * Corresponding author (rainer.groh@bristol.ac.uk)	2741
2755	Design and Analysis of a Morphing Trailing Edge Structure	Z. Wang1*, Y. Yang1, S. Duan1, X. Sun2 1Aircraft Strength Research Institute, Xi’an 710065, China 2Chinese Aeronautical Establishment, Beijing 100012, China * Corresponding author (zgwang555@163.com)	2755
2776	Multi-scale Reliability Based Optimization of Laminated Composite Structures Based on Fiber Volume Fractions with Genetic Algorithm	Y. Jiang1, D. Xu2, S. Zhang1, L. Zhang1 &X. Chen2 1 Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, China 2 Naval Academy of Armament, China	2776
2893	A CRITICAL ASSESSMENT OF COMPUTER TOOLS FOR CALCULATING PROPERTIES OF BRIDGE GIRDERS WITH DIFFERENT CROSS-SECTION	Zhong Yifeng, Xia Zhenting, Mei Baoping (Chongqing University)	2893
2969	Eigenvalue Buckling Analysis of Functionally Graded Graphene Platelets Reinforced Corrugated Webs	Yu Wang, Zhan Zhao, Chuang Feng, Jie Yang (RMIT University)	2969
2975	Aeroelastic tailoring of the composite wing structure via shape function approach	Wenmin Qian (Beijing Aeronautical Science & Technology Research Institute of COMAC), Jie Zeng (Beijing Aeronautical Science & Technology Research Institute of COMAC), Zhiqiang Zhou (ZONA Technology INC)	2975
2990	PARAMETERS ESTIMATION OF DRUCKER-PRAGER PLASTICITY CRITERIA FOR STEEL- CONFINED CIRCULAR CONCRETE COLUMNS IN COMPRESSION	Walid A. Al-Kutti Department of Construction Engineering, University of Dammam, Dammam, P.O. Box 1982, 31441, Saudi Arabia, wasalem@uod.edu.sa	2990
2997	Theoretical analysis on CFRTP optimal structure subjected to bending load and the influence of out-of-plane shear modulus	RyusUnited Kingdome Shida , Jun Takahashi (The University of Tokyo)	2997
3073	INFLUENCE OF DIFFERENT STRUCTURAL PARAMETERS ON THE MECHANICAL PROPERTIES OF COMPOSITE THIN-WALLED STRUCTURE	Long Wang, Guanyu Liu, Jianguo Wu, Xianhong Meng, Haibo Li (Beihang University)	3073
3160	Development of a structural optimisation methodology for use in the design of a composite semi-trailer chassis	Joel Galos, Dr. Michael Sutcliffe (University of Cambridge)	3160
3193	Design and optimization method for 3D printed carbon reinforced aircraft components	W.M. van den Brink (Netherlands Aerospace Centre (NLR)), R. Bruins (NLR), F. van der Klift (Delft University of Technology), M. Hermans (Delft University of Technology)	3193
3250	MODELLING AND OPTIMIZATION ANALYSIS OF COMPOSITE TAPE SPRING	Yang Zhang1, Hong ling Ye1, Qing sheng Yang1 1Beijing University of Technology, and, zhang-yang@emails.bjut.edu.cn, yehongl@bjut.edu.cn qsyang@bjut.edu.cn	3250
3268	A new hybrid concept for CFRP pedicle screws: finite element analysis	Y. N. Becker, N. Motsch; J. Hausmann (Institute for Composite Materials (IVW) GmbH)	3268
3318	On gradient based structural optimization of a wind turbine blade	E. Lund , J.H. Sjølund (Aalborg University)	3318
3397	Elastic properties of 3D adding ribs re-entrant cellular structure	Xiang Li, Zi-Xing Lu, Zhen-Yu Yang (Beihang University)	3397
3444	LIGHTWEIGHT DESIGN OF BATTERY BOX FOR ELECTRIC VEHICLE	Zhao Xiaoyu (Changchu University of science and technology), Zhang Boming (Beihang University), Zhang Shuren (Changchu University of science and technology)	3444
3519	Effect of Design Heuristics on the Compression and Shear Buckling Performance of Infinitely Long Plates With Bending-Twisting Coupling.	Christopher Bronn York (University of Glasgow), Sérgio Frascino Müller de Almeida (University of São Paulo)	3519
3526	Improving Composite Laminates Through Biomimicry	J.L. Liu, B.C. Tan (National University of Singapore)	3526
3603	Research of carbon fiber composite valves used in small compressor	Zheng Chuanxiang, Lian Jiaoyuan, Wu Jiayi, Zhang Guojiang (Zhejiang University)	3603
3647	A general computational framework for designing morphing structures	R.M.J. Groh, A. Pirrera (University of Bristol)	3647
3659	design and analysis of a morphing trailing edge structure	Z. Wang (Aircraft Strength Research Institute), Y. Yang (Aircraft Strength Research Institute), S. Duan (Aircraft Strength Research Institute), X. Sun (Chinese Aeronautical Establishment)	3659
3733	BUCKLING ANALYSIS OF VARIABLE ANGLE TOW COMPOSITE PLATES WITH ONE CIRCULAR DELAMINATION	Zhangming Wu (Cardiff University), Xiaodong Chen (Tongji University), Paul. M. Weaver (University of Bristol)	3733
3747	Influence of strand dispersion method on mechanical properties of hollow S-shaped member made of randomly-oriented CFRTP strands	Michinobu Fujita, Yuto Nakashima , Jun Takahashi (The University of Tokyo)	3747
3825	NUMERICAL ANALYSIS ON BEARING BEHAVIOR OF COMPOSITE BEAM WITH OPEN-HOLE	Wenxuan Xie, Fa Zhang, Jubin Gao, Chuanjun Liu (Beijing Aeronautical Science & Technology Research Institute of COMAC)	3825
3831	Discrete Stiffness Tailoring for Improved Buckling Performance	L. Culliford, R. S. Choudry, R. Butler, A.T. Rhead (University of Bath)	3831
3902	Optimization of Composite Wing Using Genetic Algorithm	Haigang Zhang, Xitao Zheng, Wenchong Yang, Chenxi Lv (Northwestern Polytechnical University)	3902
3923	Verification of flexural rigidity of thickness optimized structure made of discontinuous CFRTP	Wataru Sato, Ryusuke Shida, Hideki Toyoda, Michinobu Fujita, Jun Takahashi (The University of Tokyo)	3923
3932	INVESTIGATION IN DELAMINATION BEHAVIOR OF COMPOSITE STIFFENER RUN- OUT UNDER TENSILE LOAD	Li Liang, Jia Purong (Northwestern Polytechnical University)	3932
4016	MECHANICAL ANALYSIS OF CARBON NANOTUBE/SHAPE MEMORY POLYMER COMPOSITES	Jinsu Kim, Yongsan An, Seokbin Hong , Woong-Ryeol Yu (Seoul National University)	4016
4043	NUMERICAL ANALYSIS OF THERMALLY-INDUCED RESIDUAL STRESS AND DEFLECTION OF CFRP WING STRUCTURE	Shijun Guo, Wenli Liu* and Prahchaya Paophongnbuam  Centre of Aeronautics, Cranfield University, Cranfield MK43 0AL, UK Corresponding author (wenli.liu@cranfield.ac.uk)	4043
4095	MULTI-MATERIAL TOPOLOGY OPTIMIZATION FOR COMPOSITE METAL AIRCRAFT STRUCTURES	Cheng Liu, Mehdi Yasaee, Iman Dayyani (Cranfield University)	4095
4167	Nonlinear Asymptotic Homogenization method for periodic elastic material with large deformation	Yu Huan, Shutian Liuand, Jian Zhao (Dalian University of Technology)	4167
4340	A TWO-STEP OPTIMIZATION SCHEME FOR GLOBAL OPTIMIZATION DESIGN OF COMPOSITE FRAME	Jingyuan Wang (Dalian University of Technology), Jun Yan (Dalian University of Technology), Zunyi Duan (Dalian University of Technology, Harbin Electric Corporation), Tao Yu (Dalian University of Technology), Erik Lund (Aalborg University)	4340
4341	CONCURRENT MULTI-SCALE OPTIMIZATION DESIGN OF COMPOSITE FRAME STRUCTURES WITH MAXIMUM FUNDAMENTAL FREQUENCY	Jun Yan (Dalian University of Technology), Zunyi Duan (Dalian University of Technology, Harbin Electric Corporation), Jingyuan Wang (Dalian University of Technology), Tao Yu (Dalian University of Technology), Erik Lund (Aalborg University)	4341
4356	A scaled boundary finite element formulation for composite beams of arbitrary cross-section	Jonathan Daniel Jung, Wilfried Becker (TU Darmstadt)	4356
4389	Variable Stiffness Composite Laminates for Doubly Curved Plates Using Lamination Parameters	Matthew Thomas, Professor Paul M. Weaver, Professor Stephen R. Hallett (University of Bristol)	4389
4466	Void Formation and Distribution during CFRP Curing Process	Dongkangkang Chen, Yumin Zhang, Yufeng Zhou (Harbin Institute of Technology)	4466
4473	Mechanical properties of 3D re-entrant auxetic cellular structures	Xin-Tao Wang, Xiao-Wen Li, Li Ma (Harbin Institute of Technology)	4473
4504	TOPOLOGY OPTIMIZATION OF ZERO POISSON’S RATIO HONEYCOMB STRUCTURES FOR LIGHTER WEIGHT	Jian Huang, Qiuhua Zhang, Jinsong Leng (Harbin Institute of Technology)	4504
4539	OPTIMIZATION OF COMPOSITES WITH REPEATING SUB-LAMINATES	Ming Zhou, Raphael Fleury, Jeffrey Wollschlager (Altair Engineering)	4539
4625	A STRUCTURE DESIGN OF CFRP REAR PRESSURE BULKHEAD WITHOUT STIFFENERS	Li Zhongyang, Li Dong, Guo Xiang	4625
Theme 2 Structural Design
2.2 Track Multiscale Modelling of Structures
Paper ID	Full Paper Title	Author	Paper ID
2958	On stress concentration factors of the matrix in a composite	Zheng-Ming Huang, Limin Xin, Yi Zhou( Tongji University)	2958
3031	STATIC AND DYNAMIC FOLDING OF THREEDIMENSIONAL ELASTIC MATERIALS	Davide Bigoni, Panos A. Gourgiotis (University of Trento)	3031
3043	Extended multiscale finite element method for geometrically nonlinear analysis of of thin composite plates on bending problems	Ming-Fa Ren, Jie Cong (Dalian University of Technology)	3043
3125	PERIDYNAMICS FOR HOMOGENIZATION AND DAMAGE TENSOR IN COMPOSITES	E. Madenci , A. Barut (The University of Arizona), N. Phan (Naval Air Systems Command (NAVAIR))	3125
3140	A MULTISCALE MODEL FOR THE PREDICTION OF FATIGUE CRACK GROWTH BEHAVIORS OF POLYMER NANOCOMPOSITES	Maenghyo Cho, Hyunseong Shin (Seoul National University)	3140
3168	SPECTRAL STOCHASTIC HOMOGENIZATION OF COMPOSITES WITH RANDOMNESS IN CONSTITUENT MATERIAL PROPERTIES	J. Zhi, T.E. Tay (National University of Singapore)	3168
3174	Runway Debris Impact on Generic Composite Turbofan Blade Multiscale Progressive Failure Analysis	Gong Huiling(MVT Group Inc) Frank Abdi, Marc Villà Montero, Cody Godines( Alpha STAR Corp)	3174
3297	Effect of Loading Conditions on Mechanical Behavior of Nafion Membrane	K. Kawanishi, I. Riku, K. Mimura (Osaka Prefecture University)	3297
3348	A NUMERICAL METHOD FOR PREDICTING THE MECHANICAL PROPERTIES OF TIGHTLY PACKED SYNTACTIC FOAMS	Adam Mayall1, Declan Carolan1,2, Alexander Fergusson1,2, John P. Dear2 1 FAC Technology, Canterbury Court, 1-3 Brixton Road, London, SW9 6DE, United Kingdom Email: declan@factechnology.com, website www.factechnology.com 2 Department of Mechanical Engineering, Imperial College London, SW7 2AZ, United Kingdom	3348
3356	MULTISCALE ANALYSIS OF METAL / THERMOPLASTIC COMPOSITE INTERFACES USING ESI VPS	Sebastian Müller(ESI Software Germany GmbH), Patrick de Luca , Alain Tramecon( ESI Group)	3356
3405	KINEMATIC MODELING FOR REALISTIC INTERNAL ARCHITECTURAL OF 3D WOVEN CFRP REINFORCEMENT UNIT CELL	Zhiping Ying1, Zhenyu Wu1 Xiaoying Cheng1 and Xudong Hu1   1Faculty of Mechanical Engineering & Automation, Zhejiang Sci-tech University Hangzhou, Xiasha, 310018, Zhejiang, China Email: zstuyingzp@163.com, web page: http://www.zstu.edu.cn	3405
3542	MULTISCALE MODELING OF IMPACT BEHAVIOR FOR POLYMER COMPOSITES	Mohit Gupta, Harpreet Singh , Puneet Mahajan(Department of Applied Mechanics)	3542
3566	Sensitivity of Orthotropic Material Parameters used within the Strain Invariant Failure Theory	Nayeem Tawqir Chowdhury, Garth Pearcea, Akhila MUnited Kingdomkavillia(UNSW), Wing Kong Chiu(Monash University), John Wang (Aerospace Division, Defence Science and Technology Group)	3566
3612	ASYMPTOTIC ANALYSIS METHOD FOR HEAT CONDUCTION PROBLEM OF COMPOSITE MATERIALS IN CURVILINEAR COORDINATES	Qiang Ma1, Zhihui Li1,2 and Junzhi Cui3 1 Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China, maqiang@lsec.cc.ac.cn 2 National Laboratory for Computational Fluid Dynamics, BUAA, Beijing 100191, China, zhli0097@x263.net 3 LSEC, ICMSEC, Academy of Mathematics and Systems Science, CAS, Beijing 100190, China, cjz@lsec.cc.ac.cn	3612
3688	Preliminary observations on the architecture of textile composites using micro-Xray-CT	Nayeem Tawqir Chowdhury, Garth Pearcea.(UNSW)	3688
3764	Predicting the effect of temperature on matrix cracking in thermoset composites using a strain invariant approach	Akhila MUnited Kingdomkavilli (UNSW)	3764
3771	MULTISCALE MODELLING OF LAMINATION DEFECTS IN CURVED STRUCTURES	Anne Reinarz , Tim Fletcher ( University of Bath), Tim Dodwell, Richard Butler, Rob Scheichl,	3771
3867	EXPERIMENTAL PROOF FOR THE CLOAKING OF FLEXURAL VIBRATIONS IN A STRUCTURED PLATE	Diego Misseroni (University of Trento)	3867
3905	MULTI-SCALE MECHANICAL ANALYSIS AND DESIGN OPTIMIZATION OF THREE-DIMENSIONAL TEXTILE COMPOSITE STIFFENED STRUCTURES	Xinwei Fu, Hao Wang(Institute of Manned Spacecraft System Engineering CAST), Sergio Ricci (Department of Aerospace Science and Technology), Chiara Bisagni(Delft University of Technology)	3905
3931	A MULTISCALE MODEL FOR MODAL ANALYSIS OF COMPOSITE STRUCTURES WITH BOLTED JOINTS	Z. Zhang(Tongji University&The Hong Kong Polytechnic University), Y. Xiao, Y. Z. Shen (Tongji University), Z.Q. Su (The Hong Kong Polytechnic University)	3931
4021	MICROWAVE ABSORPTION PERFORMANCE SIMULATION OF A FACILE YET UNEXPECTEDLY EFFECTIVE MICROWAVE ABSORPTION COMPOSITE MATERIAL	Yang Minglong1, Yuan Ye2, Li Yibin*3 1 Harbin 150080, P. R. China ,Center for Composite Materials and Structures, Harbin Institute of Technology, 16b918101@stu.hit.edu.cn	4021
4230	ON THE MESO-MECHANICAL MODELING METHOD FOR TEXTILE COMPOSITES	Chao Zhang1 and Yulong Li2  1 Department of Aeronautical Structure Engineering, Northwestern Polytechnical University, Xi’an Shaanxi, China 710072	4230
4299	STRUCTURE GENOME: A REVOLUTIONARY MULTISCALE APPROACH TO BRIDGING MATERIALS GENOME AND STRUCTURAL ANALYSIS	Wenbin Yu( Purdue University)	4299
4405	A NOVEL MULTISCALE METHOD FOR MECHANICAL PROPERTIES OF STATISTICALLY INHOMOGENEOUS MATERIALS	Zhiqiang Yang (Harbin Institute of Technology), Junzhi Cui (Chinese Academy of Sciences), Yi Sun (Harbin Institute of Technology)	4405
4437	Numerical Modeling of Delamination Resistance Improvement Through The Use of CNT-Reinforced Bonding Layers	Yassine El-Assami(PRES LUNAM IFSTTAR), Venkadesh RAMAN(Institut de Recherche Technologique), Monssef DRISSI-HABTI(PRES LUNAM IFSTTAR)	4437
4492	RECENT ADVANCES IN DEVELOPING THE GENERALIZED INTERPOLATION MATERIAL POINT METHOD FOR SIMULATING BRITTLE FRACTURE BASED ON MOLECULAR DYNAMICS	Jun Tao (Dalian University of Technology), Shan Jiang (University of Mississippi), Yu-Chen Su (University of Missouri-Columbia), Zhen Chen (Dalian University of Technology)	4492
4519	EFFECTS OF CELL SIZE AND CELL WALL THICKNESS VARIATIONS ON THE STRENGTH OF CLOSED-CELL FOAMS USING LAGUERRE TESSELLATION	Youming Chen（Wuhan University of Technology）, R. Das , Mark Battley(University of Auckland)	4519
4594	MODELLING OF LIGHTNING STRIKE DAMAGE OF CFRP LAMINATES CAUSED BY SUDDEN SURFACE PLASMA EXPANSION	Kunkun Fu1, Lin Ye1, Li Chang1 and Chunhui Yang2  1School of Aerospace, Mechanical and Mechatronic Engineering, the University of Sydney NSW 2006, Australia kunkun.fu@sydney.edu.au, lin.ye@sydney.edu.au, li.chang@sydney.edu.au 2School of Computing, Engineering and Mathematics, Western Sydney University NSW 2751, Australia r.yang@westernsydney.edu.au	4594
4629	The mechanics while bridging pristine graphene patches for large area or 3-Dimensional structure	Yujie Wei1*, JiangtaoWu1, Hanqing Yin1, Xinghua Shi1, Ronggui Yang2 and Mildred Dresselhaus3 1LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China 2Department of Mechanical Engineering and Materials Science and Engineering Program, University of Colorado, Boulder, CO 80309, USA 3Department of Physics and EECS, Massachusetts Institute of Technology, Cambridge, MA 02139, USA Email: yujie_wei@lnm.imech.ac.cn	4629
4656	MICROSCOPIC MODELING OF TOW MECHANICAL BEHAVIOR IN WOVEN FABRIC FORMING	Mohammad Tahaye Abadi1 1 Aerospace Research Institute, Ministry of Science, Research and Technology, P O Box 14665 – 834, Tehran, Iran, abadi@ari.ac.ir	4656
4604	MULTISCALE CO-ROTATIONAL METHOD FOR GEOMETRIC NONLINEAR ANALYSIS OF HETEROGENEOUS PIEZOELECTRIC COMPOSITE	Hui Liu (Wuhan University), Ping Fu (Wuhan University, Yangtze River Scientific Research Institute), Xihua Chu (Wuhan University)	4604
Theme 2 Structural Design
2.3 Track Damage Tolerance of Composites Structures
Paper ID	Full Paper Title	Author	Paper ID
1707	Damage tolerance analysis of bonded composite scarf joints using cohesive zone models: limitations & challenges	J.M. Hayes-Griss(RMIT University&Advanced Composite Structures Australia), A.J. Gunnion(Advanced Composite Structures Australia), A. Orifici(RMIT University), A. A. Khatibi(RMIT University)	1707
2855	Analysing the influence of manufacturing cooling rate on the impact response of Carbon Fibre/PolyPhenylenesulfide (CF/PPS)	Stuart McCallum, Takuhei Tsukada , Nobuo Takeda(The University of Tokyo)	2855
3011	DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION	Joël Serra, Christophe Bouvet, Bruno Castanié(Institut Clément Ader (ICA) Université de Toulouse – INSA-ISAE-Mines Albi-UPS), Caroline Petiot(AIRBUS GROUP INNOVATIONS)	3011
3217	An experimental study of stiffened open-hole composite panel with BVID under uniaxial compression	Jianzhuo Sun(Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials), Qun Zhao(Beijing Aeronautical Science & Technology Research Institute of COMAC), Peng Shi , Chuanjun Liu(Future Science and Technology Park)	3217
3315	High-fidelity modelling of damage mechanisms in through-thickness reinforced composites	A.R. Melro (University of Bristol),H.Cui,N.Petrinic (University of Oxford),I.K.Partridge,S.R.Hallett (University of Bristol)	3315
3327	SPRING ELEMENT MODEL FOR HYBRID COMPOSITES WITH A RANDOM FIRE PACKING	Rodrigo Tavaresa( Faculdade de Engenharia da Universidade do Porto& University of Girona&Instituto de Ci^encia e Inova c~ao em Engenharia Mec^anica e Engenharia Industrial), Fermin Otero(Instituto de Ci^encia e Inova c~ao em Engenharia Mec^anica e Engenharia Industrial),Albert Turonb( University of Girona), Pedro P. Camanho(Faculdade de Engenharia da Universidade do Porto&Instituto de Ci^encia e Inova c~ao em Engenharia Mec^anica e Engenharia Industrial)	3327
3340	Dynamic Bridging Response of Through-Thickness Reinforcement in Composite Laminates	Hao Cui(University of Oxford), António R. Melro, Yusuf Mahadik(University of Bristol), Mehdi Yasaee(Cranfield University), Giuliano Allegri(Imperial College of London), Ivana K. Partridge, Stephen R. Hallett(University of Bristol), Nik Petrinic(University of Oxford)	3340
3354	ELASTIC WAVE PROPAGATION ANALYSIS IN A 2D FUNCTIONALLY GRADED HOLLOW CYLINDER USING SPECTRAL FINITE ELEMENT METHOD	Ze-Xing YU1, Chao XU2, Fei DU3  1,2,3 School of Astronautics, Northwestern Polytechnic University Xi’an 710072, China	3354
3362	Suppressing Delaminations in Composites across a Range of Loading Modes	Beene M’membe( University of Bristol), Mehdi Yasaee(Transport and Manufacturing Cranfield University), Stephen R. Hallett, Ivana K Partridge( University of Bristol)	3362
3615	MODE I RATE DEPENDENT MESO-MECHANICS OF Z-PINS	Hussein Hijazi1, Giuliano Allegri2, Hao Cui3 Stephen R. Hallett4 and Nik Petrinic5 1,2 Department of Aeronautics, Imperial College London, London, UK, SW7 2AZ 3,5 Department of Engineering Science, University of Oxford, Parks Road,Oxford, OX1 3PJ 4 Advanced Composites Centre for Innovation and Science (ACCIS), University of Bristol, Queen's Building, University Walk, Bristol BS8 1TR, UK	3615
3708	Experimental Study on Buckling and Progressive Damage of PreDelaminated Composite Laminates under Compression	Xing Li1 , Zhidong Guan2, Chuanjun Liu1 1Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Future Science and Technology Park,  Changping District, Beijing, China, 102211     lixing2@comac.cc 2School of Aeronautics Science and Engineering, Beihang University(BUAA), Beijing 100191, China	3708
3878	Structural Response of Aerospace-grade Thin-ply Woven and Non-crimp Fabrics	Albertino Arteiro(Universidade do Porto), Giuseppe Catalanotti(Queen's University Belfast), Jose Xavier(Instituto de Ciencia e Inovacao em Engenharia Mecanica e Engenharia Industrial&Universidade de Tras-os-Montes e Alto Douro), Peter Linde(AIRBUS Operation GmbH), Pedro P.Camanho(Universidade do Porto&Instituto de Ciencia e Inovacao em Engenharia Mecanica e Engenharia Industrial)	3878
3886	DELAMINATION GROWTH RATE IN COMPOSITE LAMINATES UNDER INCREASING LOW-VELOCITY IMPACT ENERGY	M. Francesca Pernice, Andrew T. Rhead(University of Bath)	3886
4014	A NOVEL TECHNIQUE TO ACCURATELY MEASURE THE FIBRE FAILURE STRAIN IN COMPOSITE LAMINATES UNDER A COMBINED IN-PLANE TENSION AND SHEAR STRESS STATE	Meisam Jalalvand, Mohammad Fotouhi, Mun Choong Leong and Michael R. Wisnom Bristol Composites Institute (ACCIS), University of Bristol, Bristol BS8 1TR, United Kingdom, Email: m.jalalvand@bristol.ac.uk, jalalvand.meisam@gmail.com web page: http://www.bris.ac.uk/composites/	4014
4035	Failure analysis of composite laminates subjected to thermal stresses: A tran-scale approach	Xin Chang, Mingfa Ren, Xu Guo( Dalian University of Technology)	4035
4067	MECHANICAL AND IMPACT BEHAVIORS OF SANDWICH STRUCTURES USING PUR OR PERFORATED PMI FOAM CORES WITH SIMILAR BULK DENSITIES	Vasco Duarte Raposo1, José M. C. Faria Silva1, Albertino Arteiro1, Paulo Jorge R. O. Nóvoa1, 2 and António Torres Marques1, 2 1 FEUP - DEMec, R. Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal, www.fe.up.pt 2 INEGI – UMEC, FEUP Campus, R. Dr. Roberto Frias 400, 4200-465 Porto, Portugal, www.inegi.pt em11105@fe.up.pt, em11157@fe.up.pt, prnovoa@fe.up.pt, aarteiro@fe.up.pt, marques@fe.up.pt	4067
4159	SIMULATION OF THE OPEN-HOLE TENSILE RESPONSE OF COMPOSITE LAMINATES USING A COMBINED DISCRETE AND CONTINUUM DAMAGE APPROACH	Mina Shahbazi, Reza Vaziri( The University of British Columbia)	4159
4237	ANGLE-PLY LAMINATES WITH PARTIAL-DEPTH NOTCHES FOR DAMAGE TOLERANT DESIGN OF COMPOSITE PRESSURE VESSELS	Calum P. Fowler1, Mathew W. Joosten2, Adrian C. Orifici3 and Chun H. Wang4 1,3 Sir Lawrence Wackett Aerospace Research Centre, School of Engineering, RMIT University, Melbourne, Australia 2 School of Engineering, Faculty of Science, Engineering and Built Environment, Deakin University, Waurn Ponds, Australia 4 School of Mechanical and Manufacturing Engineering, University of New South Wales, Kensington, Australia	4237
4248	Angle-ply laminates with partial-depth notches for damage tolerant design of composite pressure vessels	Calum P. Fowler(RMIT University), Mathew W. Joosten(Deakin University), Adrian C. Orifici(RMIT University) , Chun H. Wang( University of New South Wales)	4248
4351	NEW FOUR-POINT BENDING BASED METHOD FOR IMPACT  DAMAGE TOLERANCE ASSESSMENT OF SANDWICH PANELS	Gang Zhou*1, Hiu ling Leung1, Can Zheng1 and Ben Robinson1 1 Department of Aeronautical and Automotive Engineering, Loughborough University, Loughborough, Leicestershire LE11 3TU, UK, * Corresponding author (G.Zhou@Lboro.ac.uk)	4351
4432	IMPACT RESISTANCE OF CARBON/EPOXY L-SECTIONS REINFORCED THROUGH-THE-THICKNESS BY TUFTING	Steve D. Green and Giuseppe Dell'Anno  The National Composites Centre, BS16 7FS Bristol, United Kingdom steve.green@nccuk.com giuseppe.dellanno@nccuk.com www.nccuk.com	4432
4383	THE EFFECT OF THE THROUGH-THE-THICKNESS COMPRESSIVE STRESS ON MODE II INTERLAMINAR FRACTURE TOUGHNESS	G. Catalanotti(Queen's University Belfast),T.Scalici,G.Pitarresi(Universita degli Studi di Palermo),F.P.van der Meer(Delft University of Technology)	4383
Theme 2 Structural Design
2.4 Track Structural Design Criteria, Safety and Reliability
Paper ID	Full Paper Title	Author	Paper ID
3103	Rationalisation of the Tsai-Wu Failure Criterion	Shuguang Li1, Elena Sitnikova1, Yuning Liang1 and Abdul-Salam Kaddour2 1Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK 2QinetiQ, Farnborough, GU14 0LX, UK	3103
3361	STRUCTURAL STABILITY ANALYSIS OF RADOME WITH LIQUID TUNED FSS	Byung Ryung You, Heoung Jae Chun(Yonsei Univ), Yong Bae Park(Ajou Univ), Ik Pyo Hong(Gongju Nat'l Univ) , Yoon Jae Kim(Agency for Defense Development)	3361
4301	PLY THICKNESS INFLUENCE IN IMPACT DAMAGE ON CAI CARBON/EPOXY TEST SPECIMENS	Thiago H. L. Pinto1, Carlos A. Cimini Jr.2, Sung K. Ha3, Pedro H. Cabral4, Gustavo H. C. Silva4 and Alex P. Prado4  1Universidade Federal dos Vales do Jequitinhonha e Mucuri, UFVJM, Rodovia MGT 367, km 583, 5000, Alto da Jacuba, Diamantina, 39100-000, MG, Brazil, thiago.lara@ict.ufvjm.edu.br 2Universidade Federal de Minas Gerais, UFMG, Av. Antônio Carlos 6627, Belo Horizonte, 31270-901, MG, Brazil, cimini@ufmg.br  3Hanyang University, 222 Wangsimni-ro, Sageun-dong, Seongdong-gu, Seoul, South Korea, sungkha@gmail.com 4Embraer S.A., Av. Brigadeiro Faria Lima, 2.170, São José dos Campos, 12227-901, SP, Brazil, pedro.cabral@embraer.com.br, gustavo.caprio@embraer.com.br, alex.prado@embraer.com.br	4301
Theme 2 Structural Design
2.5 Track Sandwich Structures and Materials
Paper ID	Full Paper Title	Author	Paper ID
3145	Ground-structure-based Topological optimization of bionic sandwich structures with hybrid core and CFRP face sheets	Dong Li, Zhi Sun, Weisheng Zhang(Dalian University of Technology), Shanshan Shi(Dalian Jiaotong University), Haoran Chen, Xu Guo(Dalian University of Technology)	3145
2732	DYNAMIC IN-PLANE RESPONSE OF HYBRID CELLS’ HONEYCOMB	Naveed Ahmed1, Xue Pu1, Muhammad Kamran1, Naeem Zafar2 1Northwestern Polytechnical University, Xi’an, China 2CESAT, Islamabad, Pakistan Email: engineer_naveed@yahoo.com	2732
2992	A CAPACITY STUDY OF COMPOSITE SANDWICH CYLINDRICAL SHELL UNDER HYDROSTATIC PRESSURE, PART II: CALCULATION	Zixu Zhu, Yongqing Li, Xi Zhu, Libao Zhu (Department fo Naval Architecture and Ocean Engineering, Navy University of Technology, Wuhan 430033, China)	2992
3105	Analysis of nonlinear behavior on honeycomb cores	J.D.D. Rodríguez Ramírez, B. Castanié, C. Bouvet(  Université de Toulouse)	3105
3147	Predicting the Underwater Blast Response of Sandwich Plates with Elastic Cores	Andreas Schiffer (Khalifa University),Vito Tagarielli (Imperial College London)	3147
3166	Sandwich Structures with 3D Printed Functionally Graded Lattice Cores	Stephen Daynes , Stefanie Feih( Singapore Institute of Manufacturing Technology ) , Wen Feng Lu( National University of Singapore),Jun Wei (Singapore Institute of Manufacturing Technology)	3166
3182	COMPRESSION PROPERTIES OF METAL BEETLE ELYTRON PLATES AND EXPLORATION OF THE ELEMENTARY UNIT IN THE CORE STRUCTURE	Xiaoming Zhang, Jinxiang Chen(Southeast University), Yoji Okabe(The University of Tokyo), Juan Xie, Zhijie Zhang( Southeast University )	3182
3285	Study on the thermal and mechanical properties of novel neutron shielding composite laminates at elevated temperature	Xue-Long Fua,b,c, Yu-Bing Hua,c, Hua-Guan Lia,c, Jie Taoa,c,* a.College of Material Science & Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 211106, China; b.Department of Mechanical & Electronic Engineering, Jiangsu Polytechnic of Finance & Economics, Huai’an, Jiangsu 223003, China; c.Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing 211106, China;	3285
3295	Tensile behaviors of aluminum – self reinforced polypropylene fiber metal laminates based on 2/1 and 3/2 configurations	Yifan Wang, Lei Pan, Aamir Ali,Wenliang Ma, Zengmin Zheng, Tao Jie(Nanjing University of Aeronautics and Astronautics)	3295
3306	Low-velocity impact of sandwich structures with embedded ceramic plates	Tobias Mayr, Mark Battley, Tobias Müller, Abhiram Ramesh, Tom Allen, Helmut Rapp	3306
3314	A NEW TRIGGER MECHANISM FOR CRUSHING SQUARE CFRP TUBES	Rafea Dakhil Hussein(Swinburne University of Technology& Al-Muthanna University), Dong Ruan, Guoxing Lu (Swinburne University of Technology)	3314
3337	NOVEL CRACK STOPPER CONCEPT FOR LIGHTWEIGHT FOAM CORED SANDWICH STRUCTURES – EXPERIMENTAL VALIDATION, FE-MODELLING AND POTENTIAL FOR USE IN STRUCTURES	Georgios Martakos(Siemens Wind Power), Jens H. Andreasen(Aalborg University), Christian Berggreen (Technical University of Denmark), Ole Thybo Thomsen (University of Southampton)	3337
3414	Compressive properties of the hollow glass microsphere filled resin-matrix composite materials	Xiaodong Wang, Yingjie Qiao, Xiaohong Zhang, Zhipeng Xing(Harbin Engineering University), Ting Zheng (Biomaterials Innovation Research Center, Division of Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School)	3414
3420	EFFECT OF ROLLING TEMPERATURE ON SHEAR STRENGTH OF HOT ROLL BONDED TISTEEL CLAD PLATES WITH VANADIUM AND IF STEEL INTERLAYER	Boxin Li, Zejun Chen, Weijun He, Ting Zhou ( Chongqing University)	3420
3441	Indentation failure of foam cored sandwich structures subjected to elevated temperatures	Tobias Laux, Ole Thybo Thomsen (University of Southampton)	3441
3463	Low-velocity impact response of sandwich plates with a metal foam core	Qinghua Qin, Xiaoyu Zheng, Jianxun Zhang, T. J. Wang (Xi’an Jiaotong University)	3463
3488	Air permeability of balsa core, and its influence on defect formation in resin infused sandwich laminates	Richard K. Cullen, Stephen M Grove , John Summerscales （ Plymouth University）	3488
3535	IMPROVEMENTS OF CFRP COMPOSITE LAMINATED JOINT FABRICATED FROM TWO DRY CARBON HALVES USING VACUUM ASSISTED RESIN TRANSFER MOULDING VARTM	Mahmoud R. Abusrea1, Amir Asadi2, Kazuo Arakawa3, Jonathan Colton4 and Kyriaki Kalaitzidou5   1 Interdisciplinary Graduate School of Engineering, Sciences, Kyushu University, Fukuoka 816-8085 and Faculty of Engineering, Cairo University, Giza 12613, Egypt, abusrea@riam.kyushu-u.ac.jp	3535
3546	THE ACOUSTIC AND IMPACT RESPONSE OF SANDWICH STRUCTURES BASED ON NATURAL FIBER REINFORCED SKINS AND BALSA WOOD	Y.O. Shen, J.C. Zhang , Y. Li (Tongji University)	3546
3564	Fabrication and three-point-bending behavior of glass fiber reinforced thermoplastic curved corrugated sandwich panel with interface enhancement	Bing Du, Jingyan Tan , Liming Chen( Chongqing University)	3564
3567	ANALYSIS AND TEST STUDY OF THERMAL DEFORMATION ON A GRID REINFORCED CFRP MIRROR	Xu Liang, Ding Jiao-teng, Wang Yong-jie, Xie Yong-jie, Ma Zhen, Fan Xue-wu(Chinese Academy of Sciences)	3567
3671	Nano Filled Polybenzimidazole (PBI) Film Coating for Improved Environmental Performance in Space	Sarath Kumar Sathish Kumar, YunHo Kim, Chunghyeon Choi , Chun-Gon Kim（ Korea Advanced Institute of Science and Technology）	3671
3706	CYLINDER TYPE PYRAMID LATTICE SANDWICH COMPOSITE STRUCTURE ANALYSIS OF THE AXIAL COMPRESSION PERFORMANCE	Zhang Hanqi，Wang Bing(Harbin Institute of Technology)，Wang Shixun( Beijing Institute of Astronautical Systems Engineering)，Wu Linzhi(Harbin Institute of Technology)	3706
3738	Effect of core materials on compression after impact strength of composite sandwich panels subject to low velocity impact damage	E. Jones, W. Liu (Cranfield University)	3738
3744	The effect of entrapped air on the dynamic response of Nomex honeycomb sandwich structures under flatwise compression	Han Fenga, Longquan Liua (Shanghai Jiao Tong University)	3744
3749	Swelling Behaviour of Epoxy Resins in Various Solvent Systems	Felix Wolff , Prof. Chun Gon Kim(Korean Advanced Institute for Science and Technlology)	3749
3756	LOW-VELOCITY IMPACT LOCALIZATION OF THE COMPOSITE TUBE USING A NORMALIZED CROSS-CORRELATION METHOD	Hyunseok Kwon, Yurim Park, Pratik Shrestha, Chun-Gon Kim (Korea Advanced Institute of Science and Technology)	3756
3823	Visco-elastic Bending of Sandwich Beam with Light Core	Cerny M.J, Slapak P.(Czech Technical University in Prague)	3823
3826	NUMERICAL ESTIMATION OF PERFORMANCES OF FREQUENCY SELECTIVE SURFACE-IMPACTED SANDWICH RADOME	Dae-Sung Son1, *Jung-Ryul Lee1 1 Division of Aerospace Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Korea *Corresponding author e-mail: leejrr@kaist.ac.kr	3826
3852	Crushing behaviour of carbon fibre lattice structures	Kanna Subramaniyan(University of Liverpool&University of Tun Hussein Onn Malaysia), Zhongwei Guan(University of Liverpool&Chengdu University) , Wesley Cantwell (University of Liverpool& Khalifa University)	3852
3939	MIRRORS FABRICATED BY ALL CFRP COMPOSITES AND THEIR DIMENSIONAL STABILITY IN AIR	YongJie Wang*1, Liang Xu2, Jiao Teng Ding3, YongJie Xie4, Zhen Ma5 1: * Corresponding author；Xi’an Institute of Optics and Precision Mechanics of Cas, Xi’an, China，Email: wangyongjie@opt.ac.cn, http//: www.opt.ac.cn	3939
3983	LIGHTWEIGHT COMPOSITE COMPONENTS FOR A RALLY COMPETITION CAR	Gabriel Fortin1, Akio Ohtani1, Hiroyuki Hamada2, Kanta Ito3, Takanori Kitamura3 1 The Department of Advanced-Fibro Science, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, 606-8585, Japan 2 The Future-Applied Conventional Technology Centre, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, 606-8585, Japan 3Daiwa Itagami Co., Ltd., 5-32 Kawahara-cho, Kashiwara-shi, Osaka, 582-0004, Japan	3983
4024	FRACTURE CHARACTERIZATION OF PVC FOAM CORE SANDWICH SPECIMEN USING THE DCB-UBM TEST METHOD	Vishnu Saseendran , Christian Berggreen(Technical University of Denmark)	4024
4050	Mechanical properties of radar-absorbing structure with nickel- electroless-plated glass fabric	Min-Su Jang, Young-Woo Nam, Jae-Hun Choi, Chun-Gon Kim(Korea Advanced Institute of Science and Technology)	4050
4106	Strategies to investigate the residual strength of impact damaged honeycomb sandwich structures using detailed numerical models	Chris Fischer, Falk Hähnel, Andreas Hauffe, Klaus Wolf(Technische Universität Dresden)	4106
4120	On the inhomogeneous stress determination of honeycomb core block manufactured by expansion technology	Zhonggang Wang, Jiefu Liua (Central South University&Ministry of Education)	4120
4121	FLEXURAL BEHAVIOURS OF NANOPHASED RIGID POLYURETHANE FOAM CORE SANDWICH COMPOSITES	Cigdem Caglayan,Elif Demir,Idris Gurkan,Hulya Cebeci(Istanbul Technical University)	4121
4164	NUMERICAL EXPERIMENTAL STUDY ON INFLUENCE OF MULTIWALLED CARBON NANOTUBE ON MIXED MODE FRACTURE OF SANDWICH COMPOSITE	Alak Kumar Patra, Nilanjan Mitra( Indian Institute of Technology Kharagpur)	4164
4349	Indentation behaviour characteristics caused by dominant parameters in polymeric sandwich panels	Gang Zhou, Qingchun Jiang(Loughborough University), Yiou Shen（Tongji University）	4349
4390	Compressive Properties of Pyramid Lattice with Various Non-uniform Cross-section	JI Bin, Gu Chengzhang, Zhengquan, Hanhan（Aerospace System Engineering Shanghaia）	4390
4404	Improving the Performance of Tufted Composite Sandwich Structures	Jamie Hartley, Matthew Dyson, Carwyn Ward(University of Bristol)	4404
4442	Vibration damping of hybrid composite corrugated sandwich cylindrical panels	Jin-Shui Yang, Li Ma, Ge Qi, Lin-Zhi Wu (Harbin Institute of Technology)	4442
4445	Mechanical response of pyramidal lattice truss core sandwich structures by additive manufacturing	Ge Qi(Harbin Institute of Technology), Bin Ji, Han Han(Aerospace System Engineering Shanghai), Bing Wang, Li Ma(Harbin Institute of Technology)	4445
4471	SOUND TRANSMISSION LOSS OF LATTICE SANDWICH PLATE WITH PYRAMIDAL TRUSS CORES	Dong-Wei Wang, Li Ma(Harbin Institute of Technology)	4471
4519	EFFECTS OF CELL SIZE AND CELL WALL THICKNESS VARIATIONS ON THE STRENGTH OF CLOSED-CELL FOAMS USING LAGUERRE TESSELLATION	Youming Chen1, 2, Raj Das2, 3 and Mark Battley2  1 School of Automotive Engineering, Wuhan University of Technology, Wuhan, Hubei Province, China, Email: cyou659@aucklanduni.ac.nz 2 Centre for Advanced Composite Materials, Department of Mechanical Engineering, The University of Auckland, Auckland, New Zealand, Email: m.battley@auckland.ac.nz 3 Sir Lawrence Wackett Aerospace Research Centre, School of Engineering, RMIT University, GPO Box 2476, Melbourne, VIC 3001, Australia, Email: raj.das@rmit.edu.au	4519
4538	An experimental and numerical study on the blast resistance of single-curvature sandwich panels with layered-gradient metallic foam cores	Lin Jing(Southwest Jiaotong University&Xi'an Jiaotong University),Xingya Su(Southwest Jiaotong University),Longmao Zhao,Zhihua Wang (Taiyuan University of Technology)	4538
4580	THE INFLUENCE MECHANISM OF TRABECULAR RADIUS AND HEIGHT OF CORE STRUCTURE ON THE COMPRESSIVE PROPERTIES OF BEETLE ELYTRON PLATES	Jinxiang Chen1, Xiaoming Zhang2 and Yoji Okabe3  1 Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing 210096, China; xmzhangnj@163.com 2 Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing 210096, China; chenjpaper@yahoo.co.jp 3 Department of Mechanical and Biofunctional Systems, Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan	4580
4581	DYNAMIC MECHANICAL BEHAVIOR OF HIERARCHICAL MECHANICAL METAMATERIALS	Jiani Li, Jianxing Hu, Haoyu Chen(Beihang University), Jun Xu(Beihang University&Xi’an Jiaotong University&Tsinghua University), Sha Yin（Beihang University&Xi’an Jiaotong University）	4581
4583	HOLLOW LATTICE TRUSS REINFORCED HONEYCOMBS (HONEYTUBES) EXPERIMENT AND SIMULATION	Yaobo Wua,Jianxing Hu( Beihang University), Jun Xu( Beihang University&Xi’an Jiaotong University&Tsinghua University), Sha Yin（ Beihang University&Xi’an Jiaotong University）	4583
4654	Low-velocity impact response of composite sandwich panel with Al foam core	WANG Xinzhu1,2，XIANG Chenxing1，ZHOU Xiong1 (1. College of Aerospace Engineering, Chongqing Key Laboratory of Heterogeneous Material Mechanics, Chongqing University, Chongqing 400040, China; 2. State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China）	4654
Theme 2 Structural Design
2.6 Track Joints
Paper ID	Full Paper Title	Author	Paper ID
2980	Influences of textile parameters on the induction heating behavior of CFRPC	S. Becker, P. Mitschang( Institut für Verbundwerkstoffe GmbH)	2980
2886	Experimental and numerical investigation of single countersunk composite joints	Siyuan.Yao, Xiuhua.Chen, Xiaojing.Zhang, Zhefeng.Yu( Shanghai JiaoTong University)	2886
2982	ARRESTING FATIGUE CRACK IN COMPOSITE BONDED JOINT USING INTERLOCKED FIBER FEATURE	Shu, Minakuchi , Nobuo Takeda ( The University of Tokyo)	2982
3028	EXPERIMENTAL STUDY ON THE PERFORMANCE OF TWISTED FIBER REINFORCED COMPOSITE Z-PIN	Xiangyang Zhang, Yong Li, Qiyi Chu and Jun Xiao  College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, China, 210016, zhangxy@nuaa.edu.cn	3028
3060	EXPERIMENTAL INVESTIGATION OF INTEGRAL COMPOSITE T-JOINTS UNDER MIXED MODE LOADING	A. Hannig, F. Nolte , P. Horst( Institute of Aircraft Design and Lightweight Structures)	3060
3088	NUMERICAL AND EXPERIMENTAL INVESTIGATION OF PROGRESSIVE FAILURE OF BOLTED SINGLE-LAP JOINTS OF WOVEN REINFORCED COMPOSITE	X.F. Hu, A. Haris, M. Ridha, V.B.C. Tan, T.E. Tay(National University of Singapore)	3088
3191	Failure analysis of ultra-thin chopped carbon fiber tape reinforced thermoplastic in double-shear tests	Linshu Meng,Isamu Ohsawa,Jun Takahashi(The University of Tokyo)	3191
3294	The Effect of Wrinkled Interface on Tensile Strength of Composite Single-Lap Joint.	Yu-Ju Chen, Hsin Haou Huang(National Taiwan University)	3294
3320	A STIFFNESS MODEL FOR UNIDIRECTIONAL COMPOSITE BOLTED JOINTS	Yuxing Yang, Yi-Qi Wang, Xueshu Liu, Yongjie Bao, Hang Gao(Dalian University of Technology)	3320
3329	Design of pin reinforcement in metal-composite hybrid joints to maximise energy absorbance during fracture	A. T. T. Nguyen, M. Brandt, A.C. Orifici (RMIT University), S. Feih(Singapore Institute of Manufacturing Technology)	3329
3344	Damage tolerance of double-lap, multi-row composite bolted joints containing single missing fastener	Fujian Zhuang,Puhui Chen(Nanjing University of Aeronautics and Astronautics)	3344
3391	An investigation on bearing fatigue of interference-fit bolted composite joints	Wei Jingchao, Chai Yanan, Yang Yu, Chi Jian(Aircraft Strength Research Institute of China)	3391
3512	Experimental research on dynamic shear properties of C-C composite pins	Guo Fei, Fei Qing-guo, Zhang Pei-wei(Southeast University)	3512
3536	RESIDUAL DEFORMATION REDUCTION AND STRENGTH IMPROVEMENT IN COMPOSITE T-JOINT USING ASYMMETRIC LAMINATE DESIGN AND ATYPICAL DELTOID STRUCTURE	Shinsaku Hisada, Kazunori Takagaki, Shu Minakuchi, Nobuo Takeda(The University of Tokyo)	3536
3556	Analyses on formed bolted joints for thick-walled CFRP in wind power industry	Florian Schimmer, Nicole Motsch, Joachim Hausmann(Institut für Verbundwerkstoffe GmbH), Michael Magin( University of Applied Sciences Kaiserslautern), Marcel Bücker(Schäfer MWN GmbH)	3556
3569	A MODIFIED ARCAN TEST FOR MIXED-MODE LOADING OF BOLTED JOINTS IN COMPOSITE STRUCTURES	Garth M Pearce, Yong H E Quek, Cong Y Tao(UNSW)	3569
3574	Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites	Farid Gamdani, Rachid BoUnited Kingdomhili, Aurelian Vadean(Polytechnique Montreal)	3574
3590	THE INFLUENCE OF AA5083 SURFACE TREATMENTS ON THE INTERFACE BONDING PERFORMANCE BETWEEN AA5083 AND EPOXY	Aiai Zhang, Lei Pan(Nanjing University of Aeronautics and Astronautics)	3590
3696	Analysis of interface ply angle effecting on stress distribution and ultimate strength of composite adhesive joints	Xue He1,Liangliang Sun2*, Haijun Peng2, Anxin Ding2, Jihui Wang2, Junxiang Li1  1 Ming Yang Smart Energy Group Limited, Torch Hi-tech Industrial Development Zone in Zhongshan City, Guangdong Province torch Road 22 2 School of Materials Science and Engineering, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, China	3696
3741	THE INFLUENCE OF PRE-TENSION LOAD IN THE COMPOSITE LAMINATE FASTENER JOINT DURING REPEATED TITGHTING	Li Cui, Huaizhong Su (Beijing Aeronautical Science & Technology Research Institute of COMAC)	3741
3743	APPLICATION OF RADIAL AND CIRCULAR REINFORCEMENTS FOR CFRP BOLTED JOINTS	Toshifumi Fujii,Kazuo Nakajima,Yasuhiko Iwasaki (Shikibo.Ltd),YusUnited Kingdome Osugi, Shun Kudu, TakayUnited Kingdomi KUnited States of Americaka(Ritsumeikan University)	3743
3810	LASER TRANSMISSION WELDING OF THERMOPLASTIC POLYURETHANES: A ROBUST PROCESS WITH HIGH RELIABILITY	R. Staehr1, V. Wippo1, P. Jaeschke1, O. Suttmann1, L. Overmeyer1  1Laser Zentrum Hannover e.V., Hollerithallee 8, 30419 Hannover, Germany Email: r.staehr@lzh.de, v.wippo@lzh.de, p.jaeschke@lzh.de, o.suttmann@lzh.de, l.overmeyer@lzh.de  Web page: http://www.lzh.de	3810
3819	Numerical Investigation of a Hybrid Mechanical-Adhesive Joining Technology for Application in Lightweight Composite-Metal Structures	Michael C. Corbett , Conor T. McCarthy(University of Limerick)	3819
3822	Experimental investigation on mechanical behaviors of novel hybrid structure of composite to metal	Tang Huaqing, Liu Longquan(Shanghai Jiao Tong University)	3822
3924	Direct joining of CFRTP and Aluminum Sheets	K.Kuwababa, T.Yasuhara(Nippon Institute of Technology)	3924
4102	Evaluation of laser surface irradiation on the mode I fracture toughness of composite joints with CFRP adherends	Ran Taoa(King Abdullah University of Science and Technology), Marco Alfanob(University of Calabria), Gilles Lubineaua(King Abdullah University of Science and Technology)	4102
4108	A parametric study on strength and stiffness of hybrid scarf joints	Sridharan Vijay Shankar, AS Ganapathi and Sridhar Idapalapati School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore	4108
4136	THE EFFECT OF SURFACE TREATMENTS ON THE BEHAVIOUR OF ADHESIVELY BONDED, THERMOPLASTIC COMPOSITE LAP JOINTS	Emer McAleavy, Brian G. Falzon, Damian Quinn(Queen’s University Belfast)	4136
4148	Cohesive modelling of thin elasto-plastic pressure-dependent adhesive joints	Andrea Piccolroaz(University of Trento)；Gennady Mishuris(Aberystwyth University)	4148
4208	MITIGATING EDGE EFFECTS IN ADHESIVELY BONDED COMPOSITE TUBULAR LAP JOINTS UNDER AXIAL, PRESSURE AND TORSIONAL LOADING VIA STIFFNESS-TAILORING	M. A. Khana, S. Kumara( Institute Centre for Energy (iEnergy) Department of Mechanical and Materials Engineering, Masdar Institute of Science and Technology)	4208
4391	The Propagation Property of Micro-vibration Wave at Junction Structures of Composite Honeycomb Plates	Peifei Xu, Zhengong Zhou, Shidong Pan, Tianzhen Liu (Harbin Institute of Technology)	4391
4686	Thermo-mechanical de-bonding of composite-titanium single-lap adhesive joints	A S Ganapathia, S Vijay Sankarb, I Sridhara(Nanyang Technological University), Charles Ng (Rolls-Royce Singapore Pte Ltd)	4686
4688	A parametric study on strength and stiffness of hybrid   scarf joints	Sridharan Vijay Shankar, AS Ganapathi and Sridhar Idapalapati School of Mechanical and Aerospace Engineering, Nanyang Technological University,  50 Nanyang Avenue, Singapore 639798, Singapore	4688
Theme 2 Structural Design
2.7 Track Composite Structures
Paper ID	Full Paper Title	Author	Paper ID
3029	VIBRATION BEHAVIORS OF 1D LATTICE TRUSS STRUCTURES UNDER DIFFERENT CONSTRAINS	Qianqian Sui(Hohai University),Hualin Fan( Nanjing University of Aeronautics and Astronautics)	3029
2996	Quasi-static crushing of different configurations of metal-composites hybrid tubes under axiallateral loading	Dongdong Chen, Guohua Zhu, Hang Yu, Xintao Huo(Hunan University), Guangyong Sun(The University of Sydney)	2996
3018	EXPERIMENTAL INVESTIGATION ON THE ENERGY ABSORPTION BEHAVIOUR OF NACRE-INSPIRED COMPOSITE CIRCULAR TUBES UNDER AXIAL COMPRESSION	Zhibo Xin, Yugang Duan, Xiaohui Zhang(Xi'an Jiaotong University)	3018
3061	Application of Composites in Rail Vehicles	Mark Robinson (Newcastle University)	3061
3078	A numerical study of a composite sandwich panel under oblique impact	Yuan Chen(Hunan University&University of Sydney),Xu Han,Shujuan Hou(Hunan University),Kunkun Fu,Lin Ye(University of Sydney)	3078
3090	MECHANICAL PROPERTY ANALYSIS AND TEST VERIFICATION OF OPENING COMPOSITE LAMINATE	CUI  Shenshan1, ZHANG  Tao1 ,LI Chun2  1 China Academy of Launch Vehicle Technology，Beijing  100076 2 Capital Aerospace Machinery Company，Beijing  100076	3090
3194	AN AXIAL TENSILE TEST OF COMPOSITE STIFFENED PANELS WITH TWO MAN-HOLES AFTER IMPACT	Peng Shi, Qun Zhao, Jianzhuo Sun , Chuanjun Liu( Beijing Aeronautical Science & Technology Research Institute of COMAC)	3194
3204	A MODELING METHOD OF CURING DEFORMATION FOR CFRP COMPOSITE STIFFENED PANEL	WANG Yang1, GAO Jubin1 BO Ma1 LIU Chuanjun1  1 Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Future Science and Technology Park, wangyang6@comac.cc	3204
3247	Experimental and numerical analysis of fibre-reinforced composite pipes subjected to underground blasts	William Toh , Karthikayen Raju, Chong Hun Yeo, Siang Huat Goh, Vincent Beng Chye Tan"William Toh , Karthikayen Raju, Chong Hun Yeo, Siang Huat Goh, Vincent Beng Chye Tan(National University of Singapore)	3247
3265	ASSESSING DELAMINATION INITIATION FROM FIBER AND MATRIX PROPERTIES	Zheng-Ming Huang, Jia-Jie Gu (Tongji University)	3265
3354	ELASTIC WAVE PROPAGATION ANALYSIS IN A 2D FUNCTIONALLY GRADED HOLLOW CYLINDER USING SPECTRAL FINTTE ELEMENT METHOD	Ze-Xing Yu, Chao Xu,Fei Du(Northwestern Polytechnic University)	3354
3439	A new pre-design methodology for innovative composite structures	Florian Neveu, Bruno Castanié, Philippe Olivier(Université de Toulouse )	3439
3580	INTEGRAL DESIGN OF COMPOSITE STRUCTURES USING A MODIFIED CO-CURING PROCESS	Rieger, Florian; Rief, Thomas; Motsch, Nicole; Hausmann, Joachim	3580
3655	AN ADVANCED 1D FINITE ELEMENT SOLUTION FOR THERMOELASTICITY PROBLEMS IN LAMINATED BEAMS	E. Carrera, M. Filippi , A. Entezari( DIMEAS, Politecnico di Torino)	3655
3669	Tensile properties of FRP ply splice structures	CHEN Dingding, WANG Manyi(NationalUniversity of Defense Technology), ARAKAWA Kazuo(Kyushu University),JIANG Shiyi(NISSAN SHATAI CO.,LTD), WU Kegang,HU Qigao (NationalUniversity of Defense Technology)	3669
3744	The effect of entrapped air on the dynamic response of Nomex honeycomb sandwich structures under flatwise compression	Han Feng1, Longquan Liu2 1 School of Aeronautics and Astronautics, Shanghai Jiao Tong University 800 Dongchuan RD. Minhang District, Shanghai, China, 200240.  Email: ferdinaaand@outlook.com, web page: http://www.aero.sjtu.edu.cn 2 School of Aeronautics and Astronautics, Shanghai Jiao Tong University 800 Dongchuan RD. Minhang District, Shanghai, China, 200240.  Email: liulongquan76@sjtu.edu.cn, web page: http://www.aero.sjtu.edu.cn	3744
3879	Initial Post-buckling Behaviours of Composite Shallow Shells and plates	Jiayi Yan, Shuguang Li(the University of Nottingham), Guofan Zhang , Shihui Duan(AVIC Aircraft Strength Research Institute)	3879
3890	STUDIES ON THE EFFECTS OF LAMINA THICKNESS AND ORIENTATION ON THE SHEAR RESPONSE OF COMPOSITE LAMINATES	Haibao Liu , Brian G. Falzon , Giuseppe Catalanotti ( Queen’s University Belfast)	3890
3932	INVESTIGATION IN DELAMINATION BEHAVIOR OF COMPOSITE STIFFENER RUNOUT UNDER TENSILE LOAD	Li Liang, Jia Purong  Engineering Mechanics Department, Northwestern Polytechnical University, 710129, Xi’an, China, liliangxm@163.com Engineering Mechanics Department, Northwestern Polytechnical University, 710129, Xi’an, China, prjia@nwpu.edu.cn	3932
3949	PREDICTION OF FAILURE BEHAVIOUR OF COMPOSITE LATTICE STRUCTURE UNDER COMPRESSIVE LOAD	Min-Hyeok Jeon.1, Min-Song Kang1, Mun-Guk Kim1, Eun-Su Go1, In-Gul Kim.1, and Sang-Woo Lee2 1 Aerospace Engineering, Chungnam National University, Daejeon, Republic of Korea,  e-mail : mhjeon@cnu.ac.kr 2 Hankuk Fiber Co., Miryang, Korea	3949
3954	Flatwise_Compression_Properties_Of_Hierarchical_Thermoplastic_Square_Lattice	Houchang Liu, Bing Du , Liming Chen( Chongqing University)	3954
4134	SIMULATION OF THE SINGLE Z-PIN PULL-OUT TEST BY THE FINITE ELEMENT METHOD	Chung-Ki Sim, Nam Ju Lee, Seong Kyun Cheong (Seoul National University of Science and Technology)	4134
4188	EFFECT OF IN-PLANE WAVINESS IN UNIDIRECTIONAL CFRP COMPOSITES – MECHANICAL BEHAVIOR AND FAILURE CONSIDERATIONS	Mariana P. Alves, Carlos A. Cimini Jr(Universidade Federal de Minas Gerais, UFMG), Sung K. Ha(Hanyang University), Pedro H. Cabral, Gustavo H. C. Silva, Alex P. Prado(Embraer S.A.)	4188
4193	MECHANICAL BEHAVIORS OF THIN-PLY COMPOSITE LAMINATES UNDER SHORT-BEAM SHEAR AND OPEN-HOLE TENSILE LOADS: PSEUDO-HOMOGENEOUS AND ISOTROPIC BEHAVIORS	Chunfang Huang, Mingchang He, Yonglyu He, Jiayu Xiao, Jianwei Zhang, Su Ju , Dazhi Jiang (National University of Defense Technology)	4193
4283	MODELLING OF PROGRESSIVE MATRIX CRACKING INDUCED DELAMINATIONS USING AN ENRICHED SHELL ELEMENT FORMULATION	Johannes Främby, Martin Fagerström, Jim Brouzoulis( Chalmers University of Technology)	4283
4346	Design and Manufacturing of Lightweight Composite Structures Based on Continuous Fiber Reinforced Composites 3D Printing	ZhanghaoHou, Xiaoyong Tian , Tengfei Liu, Dichen Li (Xi’an Jiaotong University)	4346
4376	A STUDY ON FATIGUE CHARACTERISTICS OF SCARF JOINTREPAIRED COMPOSITE LAMINATE UNDER VARIOUS TEMPERATURE ENVIRONMENTS	Hyeon-seok. Choe1, Gwang-eun. Lee2 and Byeong-su. Kwak3, Jin-hwe Kweon4   1School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju, Gyeongnam 660-701, Korea, chlgustjr15@naver.com	4376
4377	A REPAIR METHOD OF DELAMINATED COMPOSITE STRUCTURES USING MICRO BOLTS	Sang-Seon Park1, Gyu-Seok Kang2, Hyun-Woo Ju3, and Jin-Hwe Kweon4 School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju, Gyeongnam 660-701, Korea e-mail: 1sangseonpark@naver.com, 2kgs9371@naver.com, 3greeting123@naver.com, 4jhkweon@gnu.ac.kr	4377
4449	Auto-frettage Process Analysis of Composite Pressure Vessels	Guiming Zhang, Jihui Wang, Lei Zu(Wuhan University of Technology)	4449
4466	VOID FORMATION AND DISTRIBUTION DURING CFRP CURING PROCESS	Dongkangkang Chen1, Yumin Zhang2, Yufeng Zhou3 1 Science and Technology on Advanced Composites in Special Environments Laboratory, Harbin Institute of Technology, Harbin 150001, People's Republic of China, kathychen@hit.edu.cn 2 Science and Technology on Advanced Composites in Special Environments Laboratory, Harbin Institute of Technology, Harbin 150001, People's Republic of China, zhym@hit.edu.cn 3 Science and Technology on Advanced Composites in Special Environments Laboratory, Harbin Institute of Technology, Harbin 150001, People's Republic of China, zhouyf@hit.edu.cn	4466
4502	NUMERICAL ANALYSIS AND FBG MONITORING OF CURING-INDUCED STRAIN IN POLYMER COMPOSITE LAMINATES	Qinglin Wang, Yuxi Jia(Shandong University)	4502
4512	Development of Lightweight Corrugated Cylinder for Satellite Primary Structure	Gao Feng, Ma Haiquan, Wang Han, Han Mingfen(BeiJing Institute of Spacecraft System Engineering), Li Yu, Chen Weiqiang( Beijing Satellite Manufacturing Factory)	4512
4530	FATIGUE PROPERTIES OF DOUBLE LAP-TYPE SINGLE-BOLT COMPOSITES	X.Y. LV  Y. YU and  X. J. ZHANG(Shanghai Jiao Tong University)	4530
4588	MECHANICAL BEHAVIORS OF THREE-DIMENSIONAL HIERARCHICAL LATTICE TRUSS STRUCTURES	Jian Xiong, Qianqian Wu, Ying Gao, Xingyu Wei(Harbin Institute of Technology)	4588
4597	Core/shell-structured hyperbranched aromatic polyamide functionalized graphene nanosheetspoly( p-phenylene benzobisoxazole) nanocomposite films with improved dielectric properties and thermostability†	Hao Feng,a Wenjun Ma,a Zhong-Kai Cui,b Xiaoyun Liu,*a Jinlou Gu,a Shaoliang Lina and Qixin Zhuang*a	4597
4605	Carbon fibre composites with multi-nanofillers for lightning strike protection	Anchalee Duongthipthewa, Yiyin Su , Limin Zhou( The Hong Kong Polytechnic University)	4605
4627	Multi-failure theory of composite orthogrid sandwich cylinder	Shu Jiang a, b, Fangfang Sun a, *, Hualin Fan a, * a Research center of Lightweight Structures and Intelligent Manufacturing, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China b College of Mechanics and Materials, Hohai University, Nanjing 210098, China	4627
4663	DISTRIBUTED STRAIN MEASUREMENT USING FIBRE OPTICS IN A HIGH PERFORMANCE COMPOSITE HYDROFOIL	Phyo Thu Maung1, B. Gangadhara Prusty1, Ginu Rajan1, 2, Enbang Li3, Andrew W. Phillips4 and Nigel A. St John4 1School of Mechanical and Manufacturing Engineering, UNSW Australia, NSW 2052, Australia; 2School of Electrical, Computer and Telecommunications, Engineering, University of Wollongong, NSW 2522, Australia; 3School of Physics, Faculty of Engineering and Information Sciences, University of Wollongong, NSW 2522, Australia; 4Maritime Division, Defence Science and Technology Group (DSTG), 506 Lorimer Street, Port Melbourne VIC 3207, Australia; *E-mail: p.maung@unsw.edu.au	4663
4667	THICK PLY VERSUS THIN PLY COMPOSITE LAMINATE STIFFENED PANEL BUCKLING AND POST-BUCKLING BEHAVIOR	Thaís B. C. Braz1, Carlos A. Cimini Jr.1, Per Wennhague2, Dan Zenkert2 and Tonny Nyman2,3 1Department of Structural Engineering, School of Engineering, Federal University of Minas Gerais Av. Antônio Carlos, 6627 Pampulha, 31270-901, Belo Horizonte, MG, Brazil thais-bcb@ufmg.br, carlos.cimini@gmail.com 2Department of Aeronautical and Vehicle Engineering, Royal Institute of Technology Teknikringen 8, 5th floor, SE-100 44, Stockholm, Sweden wennhague@kth.se, danz@kth.se 3SAAB AB, Broderna Ugglas gata, SE-581 88 Linköping, Sweden tonny.nyman@saabgroup.com	4667
4678	DISTRIBUTED STRAIN MEASUREMENT USING FIBRE OPTICS IN A HIGH PERFORMANCE COMPOSITE HYDROFOIL	Phyo Thu Maung1, B. Gangadhara Prusty1, Ginu Rajan1, 2, Enbang Li3, Andrew W. Phillips4 and Nigel A. St John4  1School of Mechanical and Manufacturing Engineering, UNSW Australia, NSW 2052, Australia;  2School of Electrical, Computer and Telecommunications, Engineering, University of Wollongong, NSW 2522, Australia;  3School of Physics, Faculty of Engineering and Information Sciences, University of Wollongong, NSW 2522, Australia;  4Maritime Division, Defence Science and Technology Group (DSTG), 506 Lorimer Street, Port Melbourne VIC 3207, Australia;  *E-mail: p.maung@unsw.edu.au	4678
4680	ADAPTIVE MODELLING OF DELAMINATION GROWTH USING ISOGEOMETRIC CONTINUUM SHELL ELEMENTS	M. Fagerström1*,  J.J.C Remmers2 1 Department of Industrial and Materials Science, Division of Material and Computational Mechanics, Chalmers University of Technology, Göteborg, Sweden * martin.fagerstrom@chalmers.se 2 Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands	4680
Theme 2 Structural Design
2.8 Track Office Naval Research (ONR) Session
Paper ID	Full Paper Title	Author	Paper ID
2995	FLUID-STRUCTURE INTERACTION OF COMPOSITE STRUCTURES UNDER IMPACT LOADING	Young W. Kwon(Naval Postgraduate School)	2995
2819	A CRITICAL ASSESSMENT OF PIV-BASED PRESSURE RECONSTRUCTION IN WATER-ENTRY PROBLEMS	Simonluca Russo1,2, Mohammad Jalalisendi2, Giacomo Falcucci1 and Maurizio Porfiri2 1 Department of Enterprise Engineering “Mario Lucertini”, University of Rome “Tor Vergata”, Via del Politecnico, 1 – 00133 Rome, Italy 2 Department of Mechanical and Aerospace Engineering, New York University Tandon School of Engineering, Six MeroTech Center, Brooklyn, New York 11201, USA Email: simonluca.russo@uniroma2.it, mj1283@nyu.edu, giacomo.falcucci@uniroma2.it and mporfiri@nyu.edu, web page: http://faculty.poly.edu/~mporfiri/	2819
2923	COMPARISON OF SEAWATER EFFECTS ON MECHANICAL AND VISCOELASTIC PROPERTIES OF EPOXY COMPOSITES WITH GLASS, CARBON AND THEIR HYBRID FABRIC REINFORCEMENTS	Alfred Tcherbi-Narteh, Delroy Watson, Mohammad Zaheeruddin, Donnell Tobias, Mahesh Hosur, Shaik Jeelani(Tuskegee University)	2923
3134	PREDICTION OF STRAIN RATE SENSITIVITY OF POLYMERS BY INTEGRAL TRANSFORM OF DMA DATA	Steven Eric Zeltmann, Chrys Koomson,  Nikhil Gupta (New York University Tandon School of Engineering) Engineering)	3134
3143	Effect of Low Temperature on Impact Behavior of Composite Sandwich Structures	Mohammed Elamin, Bing Li, K.T. Tan (The University of Akron)	3143
3215	Delamination in Blast Resistant laminated Glass	Mohammad Amin Samieian(Imperial College), David Cormie, David Smith, Will Wholey( Arup Resilience Security & Risk), Bamber R.K. Blackman, Paul A. Hooper, John P. Dear(Imperial College)	3215
3734	Internal Deformation of a Sandwich Plate Mapped by Digital Volumetric Speckle Photography	Lingtao Mao , Haizhou Liu(China University of Mining & Technology) ,  Fu-pen Chiang( Stony Brook University)	3734
3783	Evaluating the Blast Performance of Sandwich Structures with Novel Carbon and Glass Construction	Emily Rolfe, Mark Kelly, Hari Arora, Paul A. Hooper, John P. Dear (Imperial College London)	3783
3922	Crushing Behavior and Energy Absorption of PVC Foam: An Anisotropic Visco-Elastic-Plastic-Damage Model	Michelle S. Hoo Fatt, Anish J. Jacob, Xiaolong Tong , Arturo MacHado-Reyes (The University of Akron)	3922
4015	DEBOND FRACTURE CHARACTERIZATION IN SANDWICH COMPOSITES UNDER ARCTIC LOW TEMPERATURE CONDITIONS	Christian Berggreen (Technical University if Denmark)	4015
4257	Effect of Seawater Absorption on the Explosive Blast Resistance of Carbon Fibre Laminate	A Gargano, K Pingkarawat(RMIT University), V Pickerd(Defence Science & Technology Group), M Ibrahim(RMIT University&( Defence Science & Technology Group), A.P. Mouritz(RMIT University)	4257
4259	Repeated Impact Behavior of Woven Composites in Arctic Conditions	Alejandra Castellanos(University of Texas at El Paso) , Pavana Prabhakar(University of Wisconsin-Madison)	4259
4342	Improving the Blast Damage Resistance of Composites Using Three-Dimensional Woven Textiles	A. Gargano(RMIT University), A. Kerber(RMIT University&RWTH Aachen University), K. Pingkarawat, A.P. Mouritz(RMIT University)	4342
4361	Statistical Long Term Creep Failure Time of Unidirectional CFRP	Yasushi Miyano , MasayUnited Kingdomi Nakada( Kanazawa Institute of Technology)	4361
Theme 3 Experimental Methods
3.1 Track Digital Image
Paper ID	Full Paper Title	Author	Paper ID
3063	COMPOSITE MATERIAL PROPERTIES CHARACTERIZATION USING DIGITAL IMAGE CORRELATION AND FINITE ELEMENT MODEL UPDATING: UNCERTAINTY ANALYSIS	He TiRen (Beijing Institute of Technology), Liu Liu (Beijing Institute of Technology), Makeev Andrew (University of Texas at Arlington)	3063
2867	THREE DIMENSIONAL SHAPE RECOVERY RATIO  FOR A SHAPE MEMORY POLYMER COMPOSITE HINGE	Thanh Duc Dao1, Le Dang Khoi1, Nam Seo Goo1 and Woong Ryeol Yu2  1 Department of Advanced Technology Fusion, Konkuk University  120 Neungdong-ro, Gwangjin-gu, Seoul, 05029, Korea 2Department of Materials Science and Engineering  Seoul National University, Seoul, 08826, Korea	2867
2799	Visualization of Strain Concentrations in Composites using Advanced Image processing Techniques	Q. Wang (National Institute of Advanced Industrial Science and Technology Japan), S. Ri (National Institute of Advanced Industrial Science and Technology Japan), Y. Tanaka (National Institute for Materials Science Japan), M. Koyama (Kyushu University)	2799
3158	SNAP-THROUGH MOTION ESTIMATION OF A BUCKLED BISTABLE BEAM	Jong-Min Yun, Reynolds Addo-Akoto, Jae-Hung Han (KAIST)	3158
3426	COMPARISON OF VOLUMETRIC AND TWO-DIMENSIONAL IMAGE CORRELATION ON COMPOSITES	Thomas Rief1*, Nicole Motsch1 and Joachim Hausmann1   1 Institut für Verbundwerkstoffe GmbH, component development,  Erwin-Schroedinger-Straße 58, 67663 Kaiserslautern, Germany, http://www.ivw.uni-kl.de *Corresponding author: thomas.rief@ivw.uni-kl.de	3426
3458	MULTIPLE GRID FOR COMPUTING THE COMPOSITE BEHAVIOR WITH SPECTRAL METHOD	Bing Wang，Guo-dong Fang（Harbin Institute of Technology），Jun Liang（Harbin Institute of Technology，Beijing Institute of Technology）	3458
3604	A COMPARISON OF THE USE OF 3D DIC AND THERMOGRAPHY IN DETERMINING THE SIZE AND GROWTH OF DELAMINATIONS IN WOVEN GFRP EPOXY LAMINATES	O. Z. Ajmal (University of Surrey), A. D. Crocombe (University of Surrey), M. R. L. Gower (National Physical Laboratory United Kingdom), D. A. Jesson (University of Surrey), S. L. Ogin (University of Surrey)	3604
3719	Developing a CAI test fixture for consistent testing of composites at reduced temperature	W.O.S. Bailey, T.D. Bostock, D.A. Crump, J.M. Dulieu-Barton, S. Quinn, A.F. Robinson (University of Southampton)	3719
4260	THREE DIMENSIONAL SHAPE RECOVERY RATIO FOR A SHAPE MEMORY COMPOSITE HINGE	Thanh Duc Dao, Nam Seo Goo (KonkUnited Kingdom University)	4260
Theme 3 Experimental Methods
3.2 Track Ultrasound, Acoustic Emission, andElectromagnetic waves
Paper ID	Full Paper Title	Author	Paper ID
3253	Ultrasound in CFRP Detected by Advanced Optical Fiber Sensor for Composite Structural Health Monitoring	Qi Wu (The University of Tokyo, Nanjing University of Aeronautics and Astronautics), Yoji Okabe (The University of Tokyo), Fengming Yu (The University of Tokyo)	3253
3155	DAMAGE-TYPE IDENTIFICATION IN A CFRP CROSS-PLY LAMINATE FROM ACOUSTIC EMISSION SIGNALS DETECTED BY A FIBER-OPTIC SENSOR IN A NEW REMOTE CONFIGURATION	Fengming Yu (The University of Tokyo), Yoji Okabe (The University of Tokyo), Naoki Shigeta (IHI Corporation)	3155
3399	Mid-infrared laser ultrasonic testing for composite materials	Masahiro KUnited States of Americano, Hideki Hatano, Kanae Oguchi, Hisashi Yamawaki, Makoto Watanabe, Manabu Enoki (National Institute for Materials Science, Japan)	3399
3400	Damage size and depth estimation on composite structures with wavenumber analysis	Jun Young Jeon (Chonnam National University), Duhawn Kim (Chonnam National University), Gyuhae Park (Chonnam National University), To Kang (Korea Atomic Energy Research Institute), Soon Woo Han (Korea Atomic Energy Research Institute)	3400
3468	RESEARCH OF IMPACT TEST BASED ON ACOUSTIC EMISSION	H. Han (Aircraft Strength Research Institute, Xi’an), Y. Yang (Aircraft Strength Research Institute, Xi’an), X. Zhong (Shenyang Aircraft Design and Research Institute), H. Zhang (Aircraft Strength Research Institute, Xi’an)	3468
3624	Numerical Simulation of Lamb Wave Propagation for Detection of Impact Damage in a Skin-stringer Composite Structure	Peiwen Deng (The University of Tokyo), Yoji Okabe (The University of Tokyo), Osamu Saito (The University of Tokyo), Hideki Soejima (Fuji Heavy Industries)	3624
3641	A Single Port Scanning Free Space Measurement Technique to Investigate Reflection Loss Characteristics of the Curved Structure at X-band	Jong-Min Hyun, Hasan Ahmed, Jung-Ryul Lee (Korea Advanced Institute of Science and Technology)	3641
3774	HIGH PERFORMANCE PIEZO ELECTRIC NANOCOMPOSITE SENSOR NODES FOR STRUCTURAL HEALTH MONITORING	Mohamad Fotouhi, Bill Xiao, Thomas Pozegic, Meisam Jalalvand, Ian Hamerton, Michael R. Wisnom. Bristol Composites Institute (ACCIS), University of Bristol, Bristol BS8 1TR, UK Email: m.fotouhi@bristol.ac.uk, web page: http://www.bris.ac.uk/composites/	3774
4105	CHARACTERIZATION OF THE DIELECTRIC PROPERTIES OF UNIDIRECTIONAL ARAMID/EPOXY COMPOSITES AT VARYING TEMPERATURES BY RECTANGULAR WAVEGUIDE METHOD	XY. Xu1, BM. Zhang1, K. Liu1, M. Bai2 and DW. Liu2  1 School of Materials Science and Engineering, Beihang University, Beijing 100191, China 2 School of Electronic and Information Engineering, Beihang University, Beijing 100191, China	4105
4206	RAPID WITH DOUBLE-TURN COIL OSH-MPT ARRAY FOR DAMAGE DETECTION IN COMPOSITE PLATE	Zenghua Liu1, Xuwen Zhong1, Honglei Chen1, Cunfu He1, and Bin Wu1  1College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China liuzenghua@bjut.edu.cn, zhongxuwen@emails.bjut.edu.cn, hl.chen87@foxmail.com, hecunfu@bju t.edu.cn, wubin@bjut.edu.cn web page: http://cekong.bjut.edu.cn/	4206
4272	A numerical study on the applicability of nonlinear acoustics methods for damage imaging in composite laminates	Ashish Kumar Singh, Vincent B. C. Tan, Tong Earn Tay, Heow Pueh Lee (National University of Singapore)	4272
3426	Comparison of Volumetric and 2D-DIC on Composites	T. Rief (Institute for Composite Materials Germany), N. Motsch (Institute for Composite Materials Germany), J. Hausmann (Institute for Composite Materials Germany), P. Mäckel (isi-sys GmbH)	3426
Theme 3 Experimental Methods
3.3 Track X-Ray Computed Tomography
Paper ID	Full Paper Title	Author	Paper ID
4220	AUTOMATIC DETECTION AND CLASSIFICATION OF DEFECTS IN WOVEN COMPOSITES MANUFACTURED BY RTM BASED ON X-RAY MICROTOMOGRAPHY	Anna Madra (Polytechnique Montréal, Sorbonne University), Piotr Breitkopf (Sorbonne University), François Trochu (Polytechnique Montréal)	4220
4242	Digital volume correlation analysis for a cross-ply laminated composite structure using a fully 3D-based correlation algorithm	Sooyoung Lee, Eonyeon Jo, Wooseok Ji (Ulsan National Institute of Science and Technology)	4242
4290	IMAGING OF COMPOSITES BY HELICAL X-RAY COMPUTED TOMOGRAPHY	Ying Wang (University of Manchester), Kristine M. Jespersen (Technical University of Denmark), Grzegorz Pyka (FEI Czech Republic s.r.o.), Lars P. Mikkelsen (Technical University of Denmark), Philip J. Withers (University of Manchester)	4290
1880	Microstructure dependent damage mechanisms in 3D using X-ray tomography	M. Jerabek1, A. Amirkhanov2, D. Salaberger2, J. Kastner2 1Borealis Polyolefine GmbH, St.-Peter Strasse 25, 4021 Linz, Austria 2University of Applied Sciences Upper Austria, Stelzhamerstr. 23, 4600 Wels, Austria	1880
2136	In Situ Observation of Multiple Failure Modes in Carbon-Epoxy Laminated Composites Using 3D Micro-Computed Tomography	Eonyeon Jo1, Wooseok Ji2* and Sooyoung Lee3  1,2,3 Department of Mechanical Engineering, Ulsan National Institute of Science and Technology, Ulsan, 44919, Korea  (* E-mail: wsji@unist.ac.kr)	2136
3736	Full 3d interior deformation of a composite beam with prepared slot under 3-point bending using digital volumetric speckle photography and micro-focus x-ray computed tomography	Lingtao Mao,Haizhou Liu,Ziyan Zhu(State Key Laboratory of Coal Resources and Safe Mining),Fu-pen Chiang(Stony Brook University)	3736
3634	CRACK PROPAGATION AT A SHARP NOTCH IN PA-GF 30 CHARACTERIZED WITH X-RAY TECHNIQUES	Volker Trappe1, Stefan Hickmann1, Andreas Kupsch1, Bernd R. Müller1, René Laquai1,  Matthias De Monte2  1 BAM Bundesanstalt für Materialforschung und –-prüfung, Unter den Eichen 87, 12205 Berlin volker.trappe@bam.de ; stefan.hickmann@bam.de ; andreas.kupsch@bam.de ; bernd.mueller@bam.de ; rene.laquai@bam.de ; https://www.bam.de 2 Robert Bosch GmbH, Corporate Sector Research and Advance Engineering, Plastics Engineering, 70465 Renningen (Stuttgart), Matthias.DeMonte@de.bosch.com ; http://www.bosch.de	3634
Theme 3 Experimental Methods
3.4 Track Interferometric Techniques
Paper ID	Full Paper Title	Author	Paper ID
2876	EVALUATION OF THE MODIFIED STRESS INTENSITY FACTORS OF THE VIBRATING COMPOSITE PLATES WITH CRACK ALONG THE CLAMPED END BY AMPLITUDE-FLUCTUATION ESPI METHOD	Chi-Hung Hwang1, Wei-Chung Wang2 1Instrument Technology Research Center, NARLabs, Hsinchu, Taiwan 2 Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan	2876
Theme 3 Experimental Methods
3.5 Track Thermography
Paper ID	Full Paper Title	Author	Paper ID
3691	Control of Composite Fatigue Damage Evolution using Infrared Thermography and Thermoelastic Stress Analysis	J.E. Thatcher,D.A. Crump(University of Southampton, United Kingdom),P.B.S. Bailey(Instron Division of ITW Ltd., United Kingdom),J.M. Dulieu-Barton(University of Southampton, United Kingdom)	3691
3798	DEVELOPMENT OF A TECHNIQUE FOR EVALUATING DAMAGE IN COMPOSITE OVERWRAPPED PRESSURE VESSELS USING TSA	D.A. Crump, N. Sathon., S.I. Ahmed, T.M.Allen, R.C.Tighe, P.A.Reed, J.M.Dulieu- Barton (University of Southampton)	3798
3800	THE INFLUENCE OF SANDWICH STRUCTURE CORE MATERIAL ON THERMOGRAPHIC NDT TECHNIQUES	G. Olafsson, A. Pujol-Soliano Dualde, R. C. Tighe, J. M. Dulieu-Barton (University of Southampton)	3800
4103	Reshaping the testing pyramid: utilisation of data-rich NDT techniques as a Means to Develop a ‘High Fidelity’ Component and Sub-structure Testing Methodology for Composites	D. J. Bull (University of Southampton), J. M. Dulieu-Barton (University of Southampton), O. T. Thomsen (University of Southampton), R. Butler (University of Bath), A. T. Rhead (University of Bath), T. Fletcher (University of Bath), K. D. Potter (University of Bristol), R. A. Smith (University of Bristol)	4103
3307	Thermoelastic stress analysis for structural performance assessment of aerospace composites	Nik Rajic (Australian Defence Science & Technology Group)	3307
2708	CONTROL OF COMPOSITE FATIGUE DAMAGE EVOLUTION USING INFRARED THERMOGRAPHY AND THERMOELASTIC STRESS ANALYSIS	J.E. Thatcher1, D.A. Crump1, P.B.S. Bailey2 and J.M. Dulieu-Barton1 1Engineering Materials, Faculty of Engineering and the Environment, University of Southampton, UK Email: jet1e13@soton.ac.uk 2Instron Dynamic Systems, Instron Division of ITW Ltd., UK Email: Peter_Bailey@instron.com	2708
Theme 3 Experimental Methods
3.6 Track Micro- and Nano- Scale Test Methods
Paper ID	Full Paper Title	Author	Paper ID
4348	AlNi Nanostructured Energetic Composite and Its Structure Characterization	Lyu Junjun, Guo Fei, He Xiaodong (CAEP)	4348
3562	Mechanical Properties of Multi-walled Carbon Nanotube/Peek Polymer Composites at Nano Scale	Chun-yen Hsu1,2,3*, Qing Zhang1,2, Kazumi Saito1,2, Chaoying Ni3, Fei Deng1,2 Super C Inc., 1352 Marrows Road, Newark, Delaware 19713, USA Email: dengfei@super-cone.com, website: www.super-cone.com 2 Shenzhen CONE Technology Co., Ltd., 1908 Shenzhen Overseas Chinese High-Tech Venture Park, Shenzhen 518057, China Email: dengfei@chinacone.com, website: www.chinacone.com 3 Department of Materials Science and Engineering, University of Delaware, Newark, Delaware 19711, USA Email: cyhsu@udel.edu	3562
Theme 3 Experimental Methods
3.7 Track Moire and Grid Based Technique
Paper ID	Full Paper Title	Author	Paper ID
4344	Full-field Strain Measurement of Carbon Fibre Reinforced Plastic Using Sampling Moire Fringes	Q. Wang, S. Ri, H. Tsuda (National Institute of Advanced Industrial Science and Technology Japan)	4344
4334	Full-field Strain Measurement of Composite Materials by the Sampling Moire Method	Shien Ri, Qinghua Wang, Hiroshi Tsuda (National Institute of Advanced Industrial Science and Technology Japan)	4334
4369	EXPERIMENTAL STUDY OF BIAXIAL BEHAVIOR OF PVB	Bing Zhan (Tongji University), Suwen Chen (Tongji University, State Key Laboratory for Disaster Reduction in Civil Engineering China), Fu-pen Chiang (Stony Brook University)	4369
4635	CRACK DETECTION OF BRITLLE STRUCTURAL MATERIAL BY MOIRÉ METHOD	Satoshi Kishimoto (National Institute for Materials Science Japan)	4635
Theme 3 Experimental Methods
3.8 Track Other New Testing Methods
Paper ID	Full Paper Title	Author	Paper ID
2821	Inversion analysis for interfacial stress of composite single-lap joint based on full-field deformation and FEM	Ruixiang Bai, Shuanghua Bao, Zhenkun Lei (Dalian University of Technology)	2821
2820	Optical experimental and numerical study on the compression buckling behaviors of composite panel stiffened by I-type ribs	Zhenkun Lei, Ruixiang Bai (Dalian University of Technology)	2820
2838	AN INNOVATIVE MECHANICAL TESTING METHOD FOR MEASURING YOUNG’S MODULUS OF THIN FLEXIBLE MULTI-LAYERED MATERIALS (OWN-WEIGHT METHOD)	Atsumi OhtsUnited Kingdomi (Meijo university)	2838
2952	Mechanical Properties of HTPB Propellant Strip Biaxial Tension Specimen	Qiang Hongfu, Liu Chang, Wang Zhejun, Wang Guang, Wang Xueren (Xi’an Institute of High Technology)	2952
2988	Investigation into the high strain-rate tensile deformation of energetic composite at low temperatures with DIC and DMA	Zhejun Wang (Xi’an Hi-Tech Institute), Hongfu Qiang (Xi’an Hi-Tech Institute), Guang Wang (Xi’an Hi-Tech Institute), Chang Liu (Xi’an Hi-Tech Institute), Xinyu Yang (The People'Liberation Army 96630 Unit)	2988
3047	THICKNESS EVALUATION OF KISSING DEFECTS IN DIELECTRIC LAMINATED COMPOSITES A HIGH-RESOLUTION MICROWAVE METHOD	Peiyu Wang (Peking University), Zhencheng Li (Peking University), Yongmao Pei (Peking University), Licheng Zhou (South China University of Technology)	3047
3529	MICRO-CRACK DETECTION TECHNIQUE IN POLYMERIC COMPOSITES DURING THERMAL CYCLING	Shambhu Kumar Gupta, Mehdi Hojjati (Concordia University)	3529
3595	Biaxial Testing of Glass/Epoxy Composite Laminates using a Modified Arcan's Fixture (MAF)	Khong Wui Gan (University of Southampton Malaysia Campus (USMC), University of Southampton), Tobias Laux (University of Southampton), Ole Thybo Thomsen (University of Southampton), Janice M. Dulieu-Barton (University of Southampton)	3595
3946	INFLUENCE OF GRIPPING CONDITION AND MATRIX TYPE ON TENSILE PROPERTIES OF UNIDIRECTIONAL CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES	Tsuyoshi MATSUO1, Masaki HOJO2 and Kazuro KAGEYAMA3  1 School of Engineering, The University of Tokyo 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan, matsuo@sys.t.u-tokyo.ac.jp 2 Department of Mechanical Engineering and Science, Kyoto University, Kyoto Nishikyo-ku, Kyoto 615-8540, Japan, hojo_cm@me.kyoto-u.ac.jp 3 School of Engineering, The University of Tokyo 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan, kageyama@giso.t.u-tokyo.ac.jp	3946
4322	ON THE DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS OF FIBRE REINFORCED POLYMER LAMINATES USING ORTHOGONAL CUTTING	Hongjian Wang, Freeda A. Amir, Li Chang, Lin Ye (The University of Sydney)	4322
4363	LINEAR LASER FAST SCANNING THERMOGRAPHY NDT FOR DISBONDS IN THERMAL BARRIER COATINGS	Dacheng Jiao (Beijing Institute of Technology), Zhanwei Liu (Beijing Institute of Technology), Wenying Zhu (Beijing Institute of Technology), Wenxiong Shi (Tsinghua University), Huimin Xie (Tsinghua University)	4363
4427	DETERMINATION ON INTERFACIAL FRACTURE TOUGHNESS OF THERMAL BARRIER COATINGS	Qi Zhu, Gaosheng Yan, Jianguo Zhu, Wenfeng Hao, Daiheng Chen (Jiangsu University)	4427
4553	METHOD OF PLANE STRESS MEASUREMENT BASED ON TERAHERTZ SPECTROSCOPY	Wang Zhiyong, Han Yunhui, Kang Kai (Tianjin University)	4553
Theme 4 Mechanical Properties
4.1 Track Constitutive Models
Paper ID	Full Paper Title	Author	Paper ID
3283	Modelling and analysis of the Ti-Al solid phase reactive diffusion bonding	Zhang Jianyu, Li Hezong, Chen Yiren (Hebei University of Engineering)	3283
2934	PROBABILISTIC MULTISCALE METHOD CONSIDERING MULTIPLE RANDOM PARAMETERS IN CONSTITUTIVE MODELS OF MATERIAL PHYSICAL PROPERTIES	Pin Wen, Hongling Ye, Qingsheng Yang (Beijing University of Technology)	2934
3031	STATIC AND DYNAMIC FOLDING OF THREE-DIMENSIONAL ELASTIC MATERIALS	Davide Bigoni1 and Panos A. Gourgiotis2  1 Department of Civil, Environmental and Mechanical Engineering University of Trento, Via Mesiano 77 – 38123 Trento, Italy 2 School of Engineering & Computing Sciences, Durham University, South Road,  Durham, DH1 3LE, U.K.	3031
3378	Effect of fiber volume fraction on the variation of stochastic elastic constants of plain-weave composite	Hao Wang, Xiu-wei Yu, Zhong-wei Wang (National University of Defense Technology)	3378
3483	A Systematic Approach to Invariant-based Anisotropic non-associative Plasticity for Fiber Reinforced Polymers	B.Daum, A. Dean, R. Rolfes (University of Hannover)	3483
3707	Experimental investigation on strain-resistance characteristics of carbon nanotube fibers and their multi-ply wires	Fu-Qing Liu, Qing-Sheng Yang, Xia Liu (Beijing University of Technology)	3707
3850	STUDY ON GLASS TRANSITION TEMPERATURE OF GRAPHENE REINFORCED SHAPE MEMORY POLYMER BY MOLECULAR DYNAMICS SIMULATIONS	Xuejiao Zhang, Qingsheng Yang, Xia Liu (Beijing University of Technology)	3850
3870	A Nonlocal Contiuum Damage Model for Brittle Fracture	Zhenyuan Gao, Liang Zhang, Wenbin Yu (Purdue University)	3870
4016	MECHANICAL ANALYSIS OF CARBON NANOTUBE/SHAPE MEMORY POLYMER COMPOSITES	Jinsu Kim1, Yongsan An1, Seokbin Hong1 and Woong-Ryeol Yu1* 1 Department of Materials Science and Engineering and Research Institute of Advanced Materials (RIAM), Seoul National University, Gwanak-ro 1, Gwanak-gu, Seoul 08826, Korea  (* E-mail: woongryu@snu.ac.kr)	4016
4034	Modeling the anisotropic deformation and delamination in laminated paperboard	Yujun Li (RWTH Aachen University), Scott Edward Stapleton (University of Massachusetts Lowell), Stefanie Reese (RWTH Aachen University), Jaan-Willem Simon (RWTH Aachen University)	4034
4270	NUMERICAL ANALYSIS OF THE MECHANICAL BEHAVIOR OF CARBON FIBER REINFORCED COMPOSITES BASED ON ELASTOPLASTIC MACROSCOPIC MODEL	Jinhyeok Jang, Jae HyUnited Kingdom Choi, Woong-Ryeol Yu (Seoul National University)	4270
4371	Deformation and failure behavior of carbon nanotube composite fibers	Xia Liu, Qingsheng Yang (Beijing University of Technology)	4371
4446	A non-linear orthotropic binary model to predict thermo-mechanical behaviour of plain weave ceramic matrix composites	Mingming Chen, Heyin Qi, Shutong Cheng, Daxu Zhang, Jinghai Gong (Shanghai Jiao Tong University)	4446
4480	A UNIVERSAL MODEL FOR PREDICTING THE EFFECTIVE SHEAR MODULUS OF TWO-DIMENSIONAL POROUS MATERIALS	Zaoyang Guo (Beihang University, Chongqing University), Lei Wang (Beihang University), Yang Chen (Chongqing University), Lingli Zheng (Beihang University), Zhenjun Yang (Coventry University), Leiting Dong (Beihang University)	4480
Theme 4 Mechanical Properties
4.2 Track Fracture and Damage
Paper ID	Full Paper Title	Author	Paper ID
2901	AN EXTENDED COHESIVE DAMAGE MODEL FOR HIGHLY EFFICIENT PREDICTION OF MULTI-DELAMINATION IN SANDWICH COMPOSITES	X Li, J Chen (University of Portsmouth)	2901
2874	ANALYTICAL AND EXPERIMENTAL STUDIES OF DAMAGE IN COMPOSITE PLATES CONTAINING INITIAL OPENINGS	Tie Ying, Sun Zhenhui, Zhou Xihui, Li Cheng (Zhengzhou University)	2874
2788	When an interface debonding occurs in a composite?	Zheng-Ming Huang, Yi Zhou, Limin Xin (Tongji University)	2788
2950	FAILURE ANALYSIS OF CENTER NOTCHED CFRP LAMINATES UNDER MULTI-AXIAL LOADING	Guangyan Liu, Hongchen Bao (Beijing Institute of Technology)	2950
2957	Numerical and experimental study of the Mode І interlaminar failure of chopped carbon fiber tape reinforced thermoplastics	Qitao Guo, Bohan Xiao, Ye Zhang, Bijan Spitzlei, Isamu Ohsawa, Jun Takahashi (The University of Tokyo)	2957
3030	MODELLING FATIGUE DAMAGE IN FIBRE METAL LAMINATE ADHESIVE JOINTS	Ahmad S.M. Al-Azzawi (Cardiff University, University of Babylon), L.F. Kawashita (University of Bristol), C.A. Featherston (Cardiff University)	3030
3035	Delamination Arrest Features In Aircraft Composite Structures Under Static and Fatigue Loading	LUnited Kingdome I. Richard, Kuen Y. Lin (University of Washington)	3035
3054	ENHANCED IN-PLANE FRACTURE BEHAVIOUR OF NOTCHED CFRP REINFORCED WITH “KILOMETRE-LONG” CARBON NANOTUBE FIBRES	T. E. Tay, A. Mikhalchan, M. Ridha (National University of Singapore)	3054
3086	Experimental study on the low velocity impact response of carbon-aramid hybrid braided composites	Ying Sun, Shuquan Tian, Mengyun Tang, Zhijun Rong, Li Chen (Tianjin Polytechnic University)	3086
3113	The mechanics of interface fracture in layered composite materials: (1) Brittle homogeneous and bi-material interfaces	S. Wang (Loughborough University, Hebei University of Engineering), C.M. Harvey (Loughborough University), J.D. Wood (Loughborough University)	3113
3114	The mechanics of interface fracture in layered composite materials: (2) Cohesive interfaces	S. Wang (Loughborough University, Hebei University of Engineering), C.M. Harvey (Loughborough University), L. Guan (Jinzhou University of Engineering)	3114
3115	The mechanics of interface fracture in layered composite materials: (3) Experimental assessments – macroscopic interface fractures	C.M. Harvey (Loughborough University), M.R. Eplett (Loughborough University), Z. Yang (University of Science and Technology Beijing), S. Wang (Loughborough University), Hebei University of Engineering)	3115
3116	The mechanics of interface fracture in layered composite materials: (4) Buckling driven delamination of thin layer materials	S. Wang (Loughborough University, Hebei University of Engineering), C.M. Harvey (Loughborough University), Q. Li (Hebei University of Engineering), B. Wang (Loughborough University), A. Watson (Loughborough University)	3116
3117	The mechanics of interface fracture in layered composite materials: (5) Thin film spallation driven by pockets of energy concentration – microscopic interface fracture	S. Wang (Loughborough University, Hebei University of Engineering), C.M. Harvey (Loughborough University), B. Wang (Loughborough University), A. Watson (Loughborough University)	3117
3161	In-situ synthesis and initial stress measurement of ultralong carbon nanotube bundles	Yunxiang Bai (Tsinghua University), Zhenxing Zhu (Tsinghua University), Huanhuan Xie (Tsinghua University), Rufan Zhang (Tsinghua University, Stanford University), Boyuan Shen (Tsinghua University), Dali Cai (Tsinghua University), Fei Wei (Tsinghua University)	3161
3175	The mechanics of interface fracture in layered composite materials: (6) Spallation of thermal barrier coatings of turbine blades	C.M. Harvey (Loughborough University), B. Yuan (Loughborough University), R. Tomson (Loughborough University), G. Critchlow (Loughborough University), S. Wang (Loughborough University, Hebei University of Engineering)	3175
3178	The mechanics of interface fracture in layered composite materials: (7) Adhesion toughness of multilayer graphene membranes – nanoscale interface fractures	J.D. Wood (Loughborough University), C.M. Harvey (Loughborough University), S. Wang (Loughborough University, Hebei University of Engineering)	3178
3185	REDUCED ORDER TECHNIQUES FOR MODELLING THE EFFECTS OF DAMAGE IN COMPOSITE PLATES	Basem Suliman, Carol Featherston, David Kennedy (Cardiff University)	3185
3225	Flexural damage assessment of carbon-epoxy composites with and without resin flow channels	Kariappa M. Karumbaiah (University of Auckland), Christoph, Kracke (BMW Group), Mark Battley (University of Auckland), Simon Bickerton (University of Auckland), Tom Allen (University of Auckland)	3225
3263	Micro-mechanical simulation of MOde I interlaminar fracture in particle-toughened interlayers	G. Borstnar, M. Jackson, M. N. Mavrogordato, I. Sinclair, S. M. Spearing (University of Southampton)	3263
3316	Ply-tailored nanoparticle matrix modification in cross-ply CFRP laminates	Christian Leopold, Andreas Schetle, Julia Kosmann, Bodo Fiedler (Hamburg University of Technology)	3316
3423	IN SITU DAMAGE MONITORING AND CORRELATION WITH ACOUSTIC EMISSION IN CFRP COMPOSITES	Fatih E. Oz (Bogazici University), Nuri Ersoy (Bogazici University), Stepan V. Lomov (KU Leuven)	3423
3429	A numerical model on compressive behavior of CFRP laminate with a designed delamination	Yi-Qi Wang, Xiangqian Zeng, Xueshu Liu, Yongjie Bao, Hang Gao (Dalian University of Technology)	3429
3459	A coupled FEM/PD based on substructure method for progressive damage analysis of composite laminate	Liu Shuo, Fang Guodong, Liang Jun (Harbin Institute of Technology, Beijing Institute of Technology)	3459
3484	A VIRTUAL TESTING APPROACH TO MATERIALS SELECTION FOR IMPACT SHIELDING APPLICATIONS	Diego Garijo (IMDEA Materials), Cláudio S. Lopes (IMDEA Materials), Olben Falcó (IMDEA Materials), Carlos González (IMDEA Materials, Polytechnic University of Madrid), Vasilis Votsios (Airbus Operations)	3484
3577	ADAPTIVE FLOATING NODE METHOD FOR THE MODELLING OF DELAMINATION FRACTURE OF COMPOSITES	X. Lu (National University of Singapore), B.Y. Chen (Institute of High Performance Computing Singapore), V.B.C. Tan (National University of Singapore), T.E. Tay (National University of Singapore)	3577
3591	PROGRESSIVE FAILURE STRAIN MEASURMENT OF A COMPRESSION LOADED CARBON FIBER LAMINATE	Jonas J. A. D’haen (BMW AG), Sebastian Kilchert (Fraunhofer Institute for High-Speed Dynamics), Octavian Knoll (BMW AG), Michael May (Fraunhofer Institute for High-Speed Dynamics), Stefan Hiermaier (Fraunhofer Institute for High-Speed Dynamics)	3591
3593	Failure of matrix in a composite subjected to multi-axial loads	Yi Zhou, Zheng-Ming Huang,Yuan-De Xue, Li-Min Xin (Tongji University)	3593
3594	Enhancement of Fracture Resistance by Multiple Cracks in Layered Structures under Mode I and Mix Mode Loading	Stergios Goutianos, Bent F. Sørensen (University of Denmark)	3594
3596	CAPTURING SUBTLE FEATURES OF DELAMINATION SHAPES IN CROSS-PLY LAMINATES DUE TO LOW SPEED IMPACT	Elena Sitnikova (The University of Nottingham), Shuguang Li (The University of Nottingham), Dafei Li (The University of Nottingham), Xiaosu Yi (Beijing Institute of Aeronautical Materials)	3596
3610	Stress invariant based elastoplastic damage modelling of unidirectional fiber reinforced composites	M.N. Rao, A.K. Bangaru, K.-U. Schröder (RWTH Aachen University)	3610
3700	NUMERICAL ANALYSIS OF INTERLAMINAR STRESS ON SYMMETRIC ANGLE-PLY LAMINATES INTERLEAVED WITH CNT NETWORKS	Lulu Shen, Wei Wang, Ling Liu (Tongji University)	3700
3704	Failure initiation dependence on specimen geometry in off axis tests	Christian Marotzke, Titus Feldmann (BAM (Federal Institute for Materials Research & Testing))	3704
3773	Multiscale Analysis on Toughness Enhancement of Epoxy-silica Nanocomposites with Interfacial Partial and Progressive Debonding	J. -G. Han, H. Shin, M. Cho (Seoul National University)	3773
3775	Damage Representation and Damage evolution for Transverse Cracking of Linear Viscoelastic UD Composite Materials	Fei Xu, Arthur Jones, Shuguang Li (University Of Nottingham)	3775
3827	Validation of a novel model for the compressive response of FRP: experiments with different fibre orientations	T. Bru (Swerea SICOMP, Chalmers University of Technology), R. Olsson (Swerea SICOMP) , G.M. Vyas (Swerea SICOMP), S. Costa (Swerea SICOMP, Chalmers University of Technology)	3827
3844	THE EFFECT OF PLY BLOCKING ON NEAR-EDGE IMPACT DAMAGE MECHANISMS	S. Hua (University of Bath), A. Sandhu (University of Exeter), A.T. Rhead (University of Bath), N. Dubary (National Higher French Institute of Aeronautics and Space), C. Bouvet (National Higher French Institute of Aeronautics and Space)	3844
3941	FE modelling to simulate the axial crushing behavior of CFRP composites	Kei Saito, Masato Nishi (JSOL Corporation)	3941
3943	A benchmarking exercise for three longitudinal strength models for unidirectional fibre-reinforced composites	Yentl Swolfs (KU Leuven), Soraia Pimenta (Imperial College London), Alain Thionnet (CNRS UMR 7633, University of Burgundy), Anthony Bunsell (CNRS UMR 7633), Larissa Gorbatikh (KU Leuven), Hannah Morton (University of Southampton), S. Mark Spearing (University of Southampton)	3943
3946	Influence of Gripping Condition and Matrix Type on Tensile Properties of Unidirectional Carbon Fiber Reinforced Thermoplastic Composites	Tsuyoshi Matsuo (The University of Tokyo), Masaki Hojo (Kyoto University), Kazuro Kageyama (The University of Tokyo)	3946
3949	PREDICTION OF FAILURE BEHAVIOUR OF COMPOSITE LATTICE STRUCTURE UNDER COMPRESSIVE LOAD	Min-Hyeok Jeon, In-Gul Kim, Eun-Su Go (Chungnam National University)	3949
3970	THE DELAMINATION GROWTH IN FMLS UNDER FATIGUE LOAD BASED ON DIC METHOD	WenBo Sun, YuE Ma (Northwestern Polytechnical University)	3970
4000	ON THE STIFFNESS OF COMPOSITE LAMINATE WITH DELAMINATIONS FOR ANALYTICAL MODEL OF LOW VELOCITY IMPACT	Jicheng Fang (Shanghai Jiao Tong University), Zhefeng Yu (Shanghai Jiao Tong University), Na Li (Shanghai aircraft design and research institute), Yi Fu (Shanghai Jiao Tong University), Xiuhua Chen (Shanghai Jiao Tong University)	4000
4001	Damage Prediction of CFRP Materials Subjected to Lightning Strike	Timothy M Harrell (University of Southampton), Ole Thybo Thomsen (University of Southampton), Janice M Dulieu-Barton (University of Southampton), Søren F Madsen (Global Lightning Protections Services A/S), Lisa Carloni (Global Lightning Protections Services A/S)	4001
4003	Progressive damage analysis of Composite laminates with big cutouts	Pengcheng Chu, Jianlin Chen, Zheng Li (Peking University)	4003
4042	An Experimental Investigation into the Stacking Sequence Effects of Quasi-Isotropic Carbon/Epoxy Laminates under Compressive Loads	Aakash Paul, Xiaodong Xu, Michael R. Wisnom (University of Bristol)	4042
4061	XFEM MODELLING OF TRANSVERSE CRACKING IN FIBRE REINFORCED COMPOSITES	Nikolay A. Petrov (KU Leuven), Larissa Gorbatikh, Stepan V. Lomov (Skolkovo Institute of Science and Technology)	4061
4115	Multi-Impact Damage and CAI Capability on Composite Laminates	Xiaoyu Zhang, Fei Xu, Wenying Li (Northwestern Polytechnical University(	4115
4147	A NEW TEST METHOD TO CHARACTERIZE MIXED MODE II/III AND I/II/III DELAMINATION	Sang Nguyen, Carla Canturri Gispert, Emile S Greenhalgh, Paul Robinson, Giuliano Allegri (Imperial College London)	4147
4194	A SPECTRAL STIFFNESS MICROPLANE MODEL FOR UNIDIRECTIONAL COMPOSITES	Marco Salviato, Sean Eunsik Phenisee, Jason Tien, Gianluca CUnited States of Americatis (University of Washington)	4194
4253	QUASI-STATIC AND IMPACT DAMAGE OF THERMOPLASTIC COMPOSITES: MICRO-MACRO EXPERIMENTAL APPROACH	A. Yudhanto (King Abdullah University of Science and Technology (KAUST)), H. Wafai (KAUST), G. Lubineau (KAUST), R. Yaldiz (SABIC), N. Verghese (SABIC)	4253
4268	Failure Analysis of Thick Laminates under Out-of-Plane Shear	Jia Liyong (First Aircraft Institute of AVIC), Jia Yuming (First Aircraft Institute of AVIC), Li Miao (First Aircraft Institute of AVIC), Yu Long (Imperial College London), Zhang Kuangyi (Imperial College London), J. P. Dear (Imperial College London)	4268
4269	KINK–BAND FORMATION OF FIBER REINFORCED POLYMER (FRP)	Kangmin Niu (University of Science & Technology Beijing), Yanan Yuan (Tsinghua University), Xuefeng Yao (Tsinghua University)	4269
4276	AN ALTERNATIVE METHOD FOR DETERMINING THE MODE I INTERLAMINAR FRACTURE TOUGHNESS	Z.Z. Guo (Shanghai Jiao Tong University), W. Xu (Shanghai Jiao Tong University), Y.G. Duan (Xi'an Jiao Tong University), H.X. Wang (Xi'an Jiao Tong University), X.J. Zhang (Shanghai Jiao Tong University),Y. Yu (Shanghai Jiao Tong University)	4276
4280	VALIDATION OF A NOVEL MODEL FOR THE COMPRESSIVE RESPONSE OF FRP: NUMERICAL SIMULATION	S. Costa (Swerea SICOMP, Chalmers University of Technology), R. Olsson (Swerea SICOMP), T. Bru (Swerea SICOMP, Chalmers University of Technology)	4280
4287	Interlaminar Reinforcement of CFRP Laminates Using Zanchor Process	Ryoya Sugihara (Ritsumeikan University), Kohei Konda (Ritsumeikan University), TakayUnited Kingdomi KUnited States of Americaka (Ritsumeikan University), Taishi Isono (Kyoto University), Masaki Hojo (Kyoto University), Toshifumi Fujii (Shikibo Ltd.), Kazuo Nakajima (Shikibo Ltd.), Yasuhiko Iwasaki (Shikibo Ltd.)	4287
4289	The effect of randomness at the micro-scale on failure of composites	Soraia Pimenta, Joël Henry, James Finley (Imperial College London)	4289
4407	THE STRESS INTENSITY FACTORS AND INTERACTIONS OF MULTIPLE INCLINED CRACKS IN A COMPOSITE LAMINATE	Shu Li, Jianxiang Wang (Peking University)	4407
4521	Delamination modeling in a double cantilever beam using s-version finite element method and cohesive zone model	Wei Xie (Northwestern Polytechnical University)	4521
4447	Stress-strain response and fracture behaviour of plain weave ceramic matrix composites under uni-axial tension, compression or shear	Heyin Qi, Mingming Chen, Yonghong Duan, Daxu Zhang (Shanghai Jiao Tong University)	4447
Theme 4 Mechanical Properties
4.3 Track Fatigue
Paper ID	Full Paper Title	Author	Paper ID
3021	Frequency Effect on Lifetime and Temperature of a Tailored Blank C/PPS Thermoplastic Composite	Roman Ruzek, Martin Kadlec, Lucie Nováková (VZLU)	3021
2945	Stochastic Damage Modelling of Mixed Mode Fatigue Delamination of Composite Wind Turbine Blades	Chi Zhang, Hua-Peng Chen (University of Greenwich)	2945
3025	Fatigue crack initiation life prediction for fiber metal laminates based on probabilistic micromechanical model	Zhang Mingyi (China Academy of Engineering Physics), Yue Guangquan (Beijing Aeronautical Science & Technology Research Institute of COMAC), Liu Fu (Shanghai Aircraft Design and Research Institute of COMAC)	3025
3107	COMPRESSION FATIGUE OF WIND TURBINE BLADE COMPOSITE MATERIALS AND DAMAGE MECHANISM	A Fraisse1, P Brøndsted2  1Department of Wind Energy, Technical University of Denmark, (Risø campus) Frederiksborgvej 399 4000 Roskilde, Denmark, antf@dtu.dk, http://www.vindenergi.dtu.dk/english	3107
3109	Influences of frequency and temperature on the fatigue behavior of plain-weave carbon/epoxy composite material with flaw subjected to partially-reversed cyclic loading	Marc-Claudel Deluy, Anh Dung Ngo, Martine Dubé (Ecole de technologie superieure)	3109
3111	STRAIN RATE-RELATED CHARACTERIZATION  OF FATIGUE BEHAVIOR OF  GLASS-FIBER-REINFORCED POLYURETHANE	Daniel Huelsbusch, Michael Jamrozy, Frank Walther (TU Dortmund University)	3111
3124	Effect of Biaxiality on the Fatigue Performance of a Laminated Composite	R. Mandapati, P. K. Mallick (University of Michigan-Dearborn)	3124
3187	A NEW EQUIVALENT CONSTANT R-RATIO LOADING APPROACH FOR PREDICTING FATIGUE LIFE OF CFRP LAMINATES UNDER VARIABLE LOADING	M. Kawai, D. Sango (University of TsUnited Kingdomuba)	3187
3254	FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATES BASED ON MASTER FATIGUE CURVE	Song Zhou, Yi Sun, Xiaojie Chen (Harbin Institute of Technology)	3254
3319	FATIGUE BEHAVIOR OF MULTIFUNCTIONAL CFRP LAMINATES AND INTRINSIC CAPABILITIES FOR DAMAGE MONITORING	Backe, Sebastian (University of Kaiserslautern); Hannemann, Benedikt (Institute for Composite Materials (IVW GmbH)); Balle, Frank (University of Kaiserslautern); Schmeer, Sebastian (IVW GmbH); Breuer, Ulf Paul (IVW GmbH)	3319
3412	DETERMINATION OF THE FATIGUE LIMIT FOR CARBON/EPOXY COMPOSITES WITH A CENTRE HOLE THROUGH SELF HEATING METHODOLOGY	Deepika Sudevan (Indian Institute of Technology Madras (Ecole Centrale de Nantes), Laurent Gornet (Ecole Centrale de Nantes), Patrick Rozycki (Ecole Centrale de Nantes)	3412
3449	EXPERIMENTAL INVESTIGATION OF THE FATIGUE BEHAVIOUR OF OFF-AXIS CFRP LAMINATES USING NON DESTRUCTIVE TECHNIQUES	K.A. Kalteremidou (Vrije Universiteit Brussel (VUB)), S. Fonteyn (VUB, SIM M3 Program), L. Pyl (VUB), D. Van Hemelrijck (VUB)	3449
3465	Rapid determination of fatigue limit of composites by Luong’s method and its improvement	J. Huang, M.L. Pastor, C. Garnier, X.J. Gong (Université Toulouse)	3465
3599	Life and Reliability Analysis of C/SiC Ceramic Matrix Composite Panels Subjected to Combined Thermal-Acoustic Loadings	Yuli Zhang, Yi Sun, Xiaojie Chen, Yizhi Liu, Jingran Ge, Song Zhou (Harbin Institute of Technology)	3599
3605	Effect of particle clustering on fatigue behavior of Mg-amorphous alloy composite	J. Nafar Dastgerdi, P. Lehto, H. Remes (Aalto University)	3605
3634	CRACK PROPAGATION AT A SHARP NOTCH IN PA-GF 30 CHARACTERIZED WITH X-RAY TECHNIQUES	Volker Trappe (Bundesanstalt für Materialforschung und -prüfung), Stefan Hickmann (BAM), Andreas Kupsch (BAM), Bernd R. Müller (BAM),  René Laquai (BAM), Matthias De Monte (Robert Bosch GmbH)	3634
3693	Development of a cyclic test method for ultra-fast rotating flywheels made of CFRP and improvement of their fatigue strength by matrix modifications	J. Krummenacker, J. Hausmann, L. Sorochynska, A. Klingler, B. Wetzel (Institute for Composite Materials (IVW GmbH))	3693
3739	Fatigue life and failure of impact-damaged carbon fibre composites under compressive cyclic loads	F. Xu, W. Liu, P. E. Irving (Cranfield University)	3739
3762	THE INFLUENCE OF RESIN STARVED AREA MANUFACTURING IMPERFECTIONS ON THE MECHANICAL PERFORMANCE OF NON-CRIMP FABRIC CFRP LAMINATE	Susanne Hörrmann1,2, Adi Adumitroaie1, Christoph Kralovec1,2 and Martin Schagerl1,2  1 Institute of Structural Lightweight Design, Johannes Kepler University Linz Altenberger Straße 69, Aut-4040 Linz, Austria Email: martin.schagerl@jku.at, web page: http://www.ikl.jku.at   2 Christian Doppler Laboratory for Structural Strength Control of Lightweight Constructions, Johannes Kepler University Linz Altenberger Straße 69, Aut-4040 Linz, Austria Email: susanne.hoerrmann@jku.at, web page: http://www.ikl.jku.at/cd/	3762
3843	MODE I FATIGUE DELAMINATION GROWTH ONSET IN FIBRE REINFORCED COMPOSITES: EXPERIMENTAL AND NUMERICAL ANALYSIS	Man Zhu (KU Leuven, SIM M3 program), Larissa Gorbatikh (KU Leuven, SIM M3 program), Sander Fonteyn (SIM M3 program, Vrije Universiteit Brussel), Lincy Pyl (Vrije Universiteit Brussel), Danny Van Hemelrijck (Vrije Universiteit Brussel), Stepan Lomov (KU Leuven, SIM M3 program)	3843
3899	Damage initiation and evolution in composite laminates under cyclic loading: a damage-based modelling framework	Quaresimin M., Carraro P. A. (University of Padova)	3899
3970	THE DELAMINATION GROWTH IN FMLS UNDER FATIGUE LOAD BASED ON DIC METHOD	Yu-E Ma 1, WenBo Sun 1 and XiaoPeng Ai 1  1 School of Aeronautics, Northwestern Polytechnical University,Box 118, #127 YouYi XiLu, Xi’An City,ShaanXi Province, 710072, P.R.China; ma.yu.e@nwpu.edu.cn	3970
4046	Relation between fatigue life and tensile strength of wood plastic composites	K. Sakamoto (Yamaguchi University), H. Azhari (Yamaguchi University), H.M. Joseph (Mahatma Gandhi University), A. Nordin (Yamaguchi University), K. Goda (Yamaguchi University), M. Okamoto (TOCLAS Co.), H. Ito (TOCLAS Co.)	4046
4286	Investigating the Goodman Diagram for Short-fibre Carbon Reinforced Polypropylene Composites	P.B.S.Bailey (Instron Dynamic Systems), P.R.Wilson (University of Warwick)	4286
4298	Integrative simulation chain for lifetime assessment of highly loaded short fiber-reinforced thermoplastics: state-of-the-art and need for improvements	Matthias De Monte (Robert Bosch GmbH), Camilo Cruz (Robert Bosch GmbH), Jan Martin Kaiser (Robert Bosch GmbH), Andreas Wilmes (Robert Bosch GmbH)	4298
4527	A NOVEL COHESIVE MODEL FOR SIMULATING DELAMINATION PROPAGATION IN COMPOSITE LAMINATED STRUCTURES	N. Hu1  and H.M. Ning2 1 College of Aerospace Engineering, Chongqing University, Shazhengjie 174, Shapingba District, Chongqing. ninghu@cqu.edu.cn 2 College of Aerospace Engineering, Chongqing University, Shazhengjie 174, Shapingba District, Chongqing. ninghuiming@cqu.edu.cn	4527
4530	FATIGUE PROPERTIES OF DOUBLE LAP-TYPE SINGLE-BOLT COMPOSITES	Xinying. Lv1, Yin. Yu2, and Jian Zhao3 1 School of Aeronautics and Astronautics, Shanghai Jiao Tong University 800 Dongchuan RD. Minhang District, Shanghai, China	4530
4537	An investigation on fatigue delamination growth in multidirectional composite laminates	Liaojun Yao, Yi Sun, Licheng Guo (Harbin Institute of Technology)	4537
4617	AE MONITORING OF FATIGUE DAMAGE GROWTH IN PLAIN WEAVE COMPOSITES WITH EMBEDDED FLAWS	Jiaping Wu, Ahmed Maslouhi (Université de Sherbrooke)	4617
4622	A micromechanics-based fatigue life prediction approach with octagonal fiber model for thermoplastic composites	Chao Zhao, Syed Zulfiqar Hussain Shah, Yong Joo Cho, Sung Kyu Ha (Hanyang University)	4622
Theme 4 Mechanical Properties
4.4 Track Dynamic Fracture
Paper ID	Full Paper Title	Author	Paper ID
3027	Impact behaviour of carbon fibre reinforced poly (methyl methacrylate) thermoplastic composite	Daiva Zeleniakiene, Kristina ZUnited Kingdomiene, Paulius Griskevicius (Kaunas University of Technology)	3027
2878	THE HIGH VELOCITY IMPACT RESISTANCE OF FIBRE METAL LAMINATES	J. Zhou (University of Liverpool), C.Kaboglu (Imperial College London), I. Mohagheghian (Imperial College London), Z. Guan (University of Liverpool), J. P. Dear (Imperial College London), W.J. Cantwell (Khalifa University of Science Technology and Research)	2878
3092	Thick-level-set modeling of the dynamic double cantilever beam test	Y. Liu, F.P. van der Meer, L.J. Sluys (Delft University of Technology)	3092
3512	EXPERIMENTAL RESEARCH ON DYNAMIC SHEAR PROPERTIES OF C/C COMPOSITE PINS	Guo Fei1, Wang Meng 2, Fei Qing-guo 3, Zhang Pei-wei4 1 Department of Engineering Mechanics, Southeast University, Nanjing, 210096, China	3512
3553	FINITE BEAM ELEMENTS BASED ON LEGENDRE POLYNOMIAL EXPANSIONS AND NODE-DEPENDENT KINEMATICS FOR THE GLOBAL-LOCAL ANALYSIS OF COMPOSITE STRUCTURES	G. Li, A.G. de Miguel, A. Pagani, E. Zappino, E. Carrera (Politecnico di Torino)	3553
3792	High-Fidelity Modelling and Dynamic Analysis of Damaged Tapered Composite Structures	E. Carreraa, A. Vigliettia, E. Zappinoa (Politecnico di Torino)	3792
3896	DYNAMIC VISCOELASTIC MODELING OF INTERFACIAL DEBONDING FOR MAGNETORHEOLOGICAL MULTIFUNCTIONAL NANOCOMPOSITES	Lizhi Sun (Zhejiang University of Technology, University of California, Irvine)	3896
4184	Dynamics of shear bands in a prestressed material	Davide Bigoni (University of Trento), Domenico Capuani (University of Ferrara), Diana Giarola (University of Trento)	4184
4395	Evaluation of impact fracture toughness of adhesively bonded CFRP joints	Yongsik Choo (Ritsumeikan University), Sota Oshima (Ritsumeikan University), Hisayoshi Ishida (Ritsumeikan University), TakayUnited Kingdomi KUnited States of Americaka (Ritsumeikan University), Tomo Takeda (Japan Aerospace Exploration Agency)	4395
Theme 4 Mechanical Properties
4.5 Track Dynamic Behavior
Paper ID	Full Paper Title	Author	Paper ID
3173	A NEWLY-DEVELOPED FIXTURE AND TESTING METHOD FOR STRAIN RATE-DEPENDENT FLEXURAL PROPERTIES DETERMINATION OF CARBON/EPOXY COMPOSITES	T. Schmack (Audi AG), R. Righi (Audi AG), D. Huelsbusch (TU Dortmund University), J. Rausch (Audi AG), D. Roquette (Audi AG), G. Deinzer (Audi AG), C. Kassapoglou (TU Delft), F. Walther (TU Dortmund University)	3173
2698	NONLINEAR VIBRATION ANALYSIS OF 3D BRAIDED COMPOSITE CYLINDRICAL PANELS RESTING ON ELASTIC FOUNDATIONS IN THERMAL ENVIRONMENTS	Tao Liu, Zhi-Min Li, Quan Zhang (Shanghai Jiao Tong University)	2698
2875	EFFECT OF THE HOLE POSITION ON COMPOSITE LAMINATES UNDER LOW VELOCITY IMPACT	Zhou Xihui, Tie Ying, Sun Zhenhui, Du Jiangtao (Zhengzhou University)	2875
2910	Uniaxial Dynamic Compressive Properties of HTPB Casting Explosives	Youcai Xiao1*, Yi Sun2, Zhijun Wang1, Zhongsi Xu1, Tiexiong Su1 1 College of Mechatronic Engineering, North University of China, Taiyuan 030051, China 2 Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China	2910
2988	INVESTIGATION INTO THE HIGH STRAIN-RATE TENSILE DEFORMATION OF ENERGETIC COMPOSITE AT LOW TEMPERATURES WITH DIC AND DMA	Zhejun Wang1, Hongfu Qiang2, Guang Wang3, Chang Liu4 and Xinyu Yang5  1 601 Staff room, Xi’an Hi-Tech Institute, qinglongzaitian888@163.com	2988
3126	SIMULATION OF ORTHOGONAL THREE-DIMENSIONAL WOVEN CARBON PLATES UNDER BALLISTIC IMPACT	Tao Liu, Paul Turner (University of Nottingham)	3126
3358	INCORPORATING DIC IN HIGH STAIN RATE TESTING OF FIBROUS COMPOSITE WITH THE SPLIT HOPKINSON BAR TECHNIQUE	Amos Gilat, Jeremy D. Seidt, Peiyu Yang (Ohio State University)	3358
3614	LOW VELOCITY IMPACT DAMAGE ASSESSMENT IN NATURAL FIBRE BIOCOMPOSITES	Karthik-Ram Ramakrishnan, Stéphane Corn, Nicolas Le Moigne, Pierre Slangen (Ecole des mines d’Alès)	3614
3651	experimental investigation of free oscillation of carbon fiber reinforced plastics	Heydt, Torsten; Motsch, Nicole; Hausmann, Joachim (Institute for Composite Materials (IVW GmbH))	3651
3665	IN-PLANE DYNAMIC CRUSHING OF HONEYCOMBS WITH DIFFERENT SIZED REGULAR HEXAGONAL CELLS ARRANGEMENTS	Naveed Ahmed (Northwestern Polytechnical University), Xue Pu (Northwestern Polytechnical University), Muhammad Kamran (Northwestern Polytechnical University), Naeem Zafar (CESAT)	3665
3740	Initial crush stress of cellular materials under dynamic loadings	Zhijun Zheng (University of Science and Technology of China), Peng Wang (University of Science and Technology of China), Shilong Wang (University of Science and Technology of China), Changfeng Zhu (University of Science and Technology of China), Yuanyuan Ding (Ningbo University), Jilin Yu (University of Science and Technology of China)	3740
3999	COMPRESSIVE MECHANICS AND FAILURE MECHANISM FOR UHMWPE FIBER REINFORCED COMPOSITE LAMINATES UNDER HYGROTHERMAL ENVIRONMENT	Libao ZHU, Yongqing LI*, Xi ZHU, Zixu ZHU  Department of Naval Architecture Engineering, Naval University of Engineering, No.717, Jiefang Road, Qiaokou District, Wuhan 430033, China.  lpzhulibao@163.com, liyongqing@126.com, zhuxi816@163.com, zorkzhu@sina.com	3999
4097	Predictions and measurements of the viscoelastic response of unidirectional fibre composites	Mehtab V. Pathana, Sophoclis Patsiasb, Vito L. Tagariellia (Imperial College London)	4097
4217	Feasibility of the NVH Simulation of Representative CFRP Automotive Body Structures	T. Courtois (Autoneum Management AG), R. Stelzer (Autoneum Management AG), O. Chesa (Inspire ICS / ETH Zürich), M. Zogg (Inspire ICS / ETH Zürich), D. Golombowski (Dow Europe GmbH)	4217
4301	PLY THICKNESS INFLUENCE IN IMPACT DAMAGE ON CAI CARBON/EPOXY TEST SPECIMENS	Thiago H. L. Pinto (UFVJM), Carlos A. Cimini Jr. (UFMG), Sung K. Ha (Hanyang University), Pedro H. Cabral (Embraer S.A.), Gustavo H. C. Silva (Embraer S.A.), Alex P. Prado (Embraer S.A.)	4301
4362	FABRICATION OF FIBER-STEEL LAMINATES BY OPTIMIZING MANUFACTURING PROCESS PARAMETERS AND STUDY THE IMPACT BEHAVIOUR	Byung-Jin Park, Dong-Woo Lee, Jung-Il Song (Changwon National University)	4362
4406	BULK STRAIN SOLITONS IN POLYMERIC COMPOSITES WITH ANISODIAMETRIC INCLUSIONS	I.V. Semenova (Ioffe Institute of the RAS), A.V. Belashov (Ioffe Institute of the RAS), O.A. MoskalyUnited Kingdom (Institute of Macromolecular Compounds), A.M. Samsonov (Ioffe Institute of the RAS), V.E. Yudin (Institute of Macromolecular Compounds)	4406
4609	ON THE DAMPING PROPERTIES OF LOAD-BEARING BIOLOGICAL MATERIALS	Zuoqi Zhang (Wuhan University), Mahan Qwamizadeh (Nanyang Technological University), Kun Zhou (Nanyang Technological University), Yongwei Zhang (Institute of High Performance Computing, Singapore)	4609
Theme 4 Mechanical Properties
4.6 Track Tribology and Wear
Paper ID	Full Paper Title	Author	Paper ID
4209	MECHANICAL, PHYSICAL, AND WEAR PROPERTIES OF POLYPROPYLENE REINFORCED SHORT CARBON FIBER COMPOSITES WITH DIFFERENT FIBER LENGTH	Harri Junaidi (King Saud University), Abdulrahman Alfawzan (King Saud University), Sattam Aloraini (King Saud University), Turki Almutairi (King Saud University),  Abdulhakim Almajid (King Saud University, Prince Sultan University)	4209
2883	FFECT OF SI CONTENT ON IMPACT-ABRASIVE WEAR RESISTANCE OF AL2O3P/STEEL COMPOSITES PREPARED BY SQUEEZE CASTING	Dehong Lu, Haizhou Li, Bo Ren, Yehua Jiang Faculty of Materials Science and Engineering, Kunming University of Science and Technology, 253 Xuefu Rd, Kunming, Yunnan, 650093, China	2883
3164	EXPERIMENTAL INVESTIGATION OF NCF-ON-TOOL CONTACT	Evangelos I. Avgoulas, Michael P.F. Sutcliffe* Department of Engineering, University of Cambridge, Cambridge, United Kingdom * Corresponding author (mpfs@eng.cam.ac.uk)	3164
3962	MECHANICAL, PHYSICAL, AND WEAR PROPERTIES OF POLYPROPYLENE REINFORCED SHORT CARBON FIBER COMPOSITES WITH DIFFERENT FIBER LENGTH	Harri Junaidi1, Abdulrahman Alfawzan1, Sattam Aloraini1, Turki Almutairi1,  Abdulhakim Almajid1,2  1Mechanical Engineering Department, College of Engineering, P. O. Box 800, Riyadh 11421, Saudi Arabia, aalmajid@ksu.edu.sa 2College of Engineering, Prince Sultan University, P. O Box 66833, Riyadh 11586, Saudi Arabia	3962
4045	EFFECT OF FRETTING WEAR ON PRELOAD RELAXATION IN BOLTED COMPOSITE JOINTS: THEORY AND SIMULATION	Y. Z. Shen, Y. Xiao, Z. Zhang (Tongji University)	4045
4373	The Role of Fracture Toughness in the Mechanics of Wear of Polymer	Li Chang, Hongjian Wang (The University of Sydney)	4373
4417	Significant improvements in wear and friction of epoxy composites filled with graphene nanoplatelets and wax-containing microcapsules	Abolhassan Imani (National Center for Nanoscience and Technology, China; University of Chinese Academy of Science), Hui Zhang (National Center for Nanoscience and Technology, China), Jun Zhao (National Center for Nanoscience and Technology, China), Jinglei Yang (Hong Kong University of Science and Technology), Mohammad Owais (National Center for Nanoscience and Technology, China; University of Chinese Academy of Science),  Zhong Zhang (National Center for Nanoscience and Technology, China)	4417
4574	EVALUATION ON WEAR OF LONG-PITCH ROLLER CHAIN WITH COMPOSITES PIN	Chang-United Kingdom Kim, Dong-Woo Lee, Byung-Jin Park, Jung-Il Song (Changwon National University)	4574
Theme 4 Mechanical Properties
4.7 Track Interfaces and Interphases
Paper ID	Full Paper Title	Author	Paper ID
3022	Evaporation-induced surface modification of PBO fiber and investigation its UV resistance	Peng Zhu,  Limin Bao (Shinshu University)	3022
2724	EFFECTS OF WATER AGING ON MECHANICAL PROPERTIES OF CONTINUOUS CARBON FIBER/POLYAMIDE 6 COMPOSITES	Hongfu Li 1,*, Sha Yin1, Yang Wang1, Boming Zhang2 1 School of Transportation Science and Engineering, Beihang University, Beijing 100191, China 2 School of Materials Science and Engineering, Beihang University, Beijing 100191, China *Corresponding author (li_hongfu@126.com)	2724
2759	BOUNDS FOR PERCOLATION THRESHOLD OF INTERFACIAL TRANSITION ZONES SURROUNDING COMPLEX GEOMETRIC AGGREGATES IN CEMENTITIOUS COMPOSITES	Peng Lan1 and Wenxiang Xu2  1 College of Mechanics and Materials, Hohai University, Nanjing 211100, China. email: penglan@hhu.edu.cn   2 Institute of Soft Matter Mechanics, College of Mechanics and Materials, Hohai University, Nanjing 211100, China. email: xuwenxiang@hhu.edu.cn and website: https://www.researchgate.net/profile/W_Xu3	2759
2783	Effects adhesive thickness on the interface performance of FRP-concrete structure	Zhao Huijian，Guo Qingyong*， Chen Lei，Mao Jize College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China	2783
2833	Influence of Interphase Characteristics on Short Fiber Plastic Composites	Marc Schöneich, Anna Sambale, Markus Stommel (TU Dortmund University)	2833
2864	Plasmonic annealing of Ag nano-films under low ambient temperature	Han Dai1, 2*, Kun Yu1,3, Hongjie Fang1, Junfeng Zhao1, Jie Sun1, Tongjian Huang2, Fang Yu2 1Laboratory of composite materials, Yantai Nanshan University, Longkou, 265713, China. 2Shandong Nanshan Aluminum co. LTD. Longkou, 264006, China. 3State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China	2864
3042	A SHEAR-LAG ANALYSIS OF STRESS TRANSFER THROUGH A COHESIVE FIBRE-MATRIX INTERFACE	Zuorong Chen (CSIRO Energy Flagship), Wenyi Yan (Monash University)	3042
3067	SPREADING DYNAMICS OF PP, PVDF, AND MAPP  ON GLASS SUBSTRATES	Yichuan Zhang1,2, Carlos A. Fuentes1, Aart W. Van Vuure1, Joël De Coninck2, and David Seveno1  1 Department of Materials Engineering, KU Leuven, 3001 Leuven, Belgium 2 Laboratory of Surface and Interfacial Physics, Université de Mons, 7000 Mons, Belgium	3067
3180	Full paper_ESTIMATION OF CARBON FIBEREPOXY INTERFACIAL NORMAL STRENGTH AND INTERFACIAL SHEAR STRENGTH BY FIBER BUNDLE TESTS	Guocheng Qi (Beihang University), Yalin Yu (Beihang University), Boming Zhang (Beihang University), Shanyi Du (Harbin Institute of Technology)	3180
3209	Investigating the use of chitosan as a coupling agent to improve the interfacial properties of phosphate glass fibre/polycaprolactone composites	Chao Tan (The University of Nottingham Ningbo China), Ifty Ahmed (The University of Nottingham), Andrew J. Parsons (The University of Nottingham), Chenkai Zhu (The University of Nottingham Ningbo China), Junxiao Zhang (The University of Nottingham Ningbo China), Chris D. Rudd (The University of Nottingham Ningbo China, The University of Nottingham), Xiaoling Liu (The University of Nottingham Ningbo China)	3209
3212	MULTIFUNCTIONAL COMPOSITES BASED ON VARIOUS NANOLAYERS	Jie Zhang (Xi’an Jiaotong University), Shanglin Gao (Leibniz–Institut für Polymerforschung Dresden), Zuoguang Ye (Xi’an Jiaotong University, Simon Fraser University)	3212
3213	The Process and Mechanism Research of In Situ Deposited Nano-SiO2 on the Surface of Jute Fiber	Yue-hong Yin, Yi-Hua Cui, Sen-jie Hao (Nanjing University of Aeronautics and Astronautics)	3213
3355	A Comparative Study on Mechanical Properties of Surface Modified Polypropylene (PP) Fabric Reinforced Concrete Composites	Guyu Feng, Kun Qian (Jiangnan University)	3355
3453	Interphase tailoring in multifunctional glass/epoxy composites by graphene oxide and reduced graphene oxide	Haroon Mahmood, Alessandro Pegoretti (University of Trento)	3453
3662	AMINO FUNCTIONALISATION OF CARBON NANOTUBE WEBS FOR ACHIEVING HIGH STRUCTURAL PERFORMANCE OF MULTIFUNCTIONAL NANO-ENHANCED HIERARCHICAL COMPOSITES	Andres Nistal (Queen’s University Belfast), Brian G. Falzon (Queen’s University Belfast), Stephen C. Hawkins (Queen’s University Belfast, Monash University)	3662
3742	Finite Element Implementation of Intrinsic Field Tensors	D.J. O’Shea, D.C. Kellermann, M.M. Attard (University of New South Wales)	3742
3963	Experimental and numerical study on the interfacial properties of CFRTP in micro-droplet test	Hao Piao, Michinobu Fujita, Isamu Ohsawa, Jun Takahashi (The University of Tokyo)	3963
4127	WETTABILITY AND INTERPHASE ADHESION OF MOLTEN THERMOPLASTICS ON GLASS FIBRES	C.A. Fuentes (KU Leuven), Y. Zhang (KU Leuven), H.Guo (KU Leuven), W. Woigk (ETH Zürich), K. Masania (ETH Zürich), C. Dransfeld (University of Applied Sciences and Arts Northwestern Switzerland), D. Seveno (KU Leuven), A.W. Van Vuure (KU Leuven)	4127
4211	Continuous production of carbon nanotube-grafted quartz fibres: Effect of carbon nanotube length on fibre/matrix adhesion	Hugo De Luca (Imperial College London), David B. Anthony (Imperial College London), Emile S. Greenhalgh (Imperial College London), Alexander Bismarck (Imperial College London, University of Vienna), Milo S. P. Shaffer (Imperial College London)	4211
4229	EFFECT OF SIZING AGENT ON THE INTERFACIAL ADHESION OF CARBON FIBER-REINFORCED POLYAMIDE 6 COMPOSITES	Tao Zhang, Yueqing Zhao, Hongfu Li, Boming Zhang (Beihang University)	4229
4263	FRACTOGRAPHIC INVESTIGAtION ON TEMPERATURE-MODIFIED FIBREMATRIX INTERFACE OF CARBON FIBRE REINFORCED COMPOSITE	Zhengrong Yu, Emile Greenhalgh, Giuliano Allegri (Imperial College London)	4263
4276	AN ALTERNATIVE METHOD FOR DETERMINING THE MODE I INTERLAMINAR FRACTURE TOUGHNESS	Z.Z. Guo 1,W. XU1*,Y.G. Duan2,H.X.Wang2, X.J. Zhang1,Y. Yu1  1School of aeronautics, Shanghai Jiao Tong University, Shanghai 200240, China 2School of Mechanical Engineering, State Key Lab for Manufacturing Systems Engineering, Xi’an Jiao Tong University, Xi’an 710049, China	4276
4263	FRACTOGRAPHIC INVESTIGATION ON TEMPERATURE-MODIFIED FIBRE/MATRIX INTERFACE OF CARBON FIBRE REINFORCED COMPOSITE	Zhengrong Yu1, Emile Greenhalgh1 and Giuliano Allegri1 1 Department of Aeronautics, Imperial College London, London SW7 2AZ, UK	4263
4281	The Effects of Interlayered Carbon Nanotube Reinforced Electrospun Nanofibers on Mixed Mode Fracture Characteristics	Özge Kaynan, Yagmur Atescan, Sassan Jahangiri, Hulya Cebeci, Elif Ozden-Yenigun (Istanbul Technical University)	4281
4314	Interlayer Shear in Bilayer Graphene Crystals	Guorui Wang (National Center for Nanoscience and Technology, China; University of Science and Technology of China), Luqi Liu (National Center for Nanoscience and Technology, China), Zhong Zhang (National Center for Nanoscience and Technology, China)	4314
4335	Nanostructured Brick-and-Mortar Interphase Inspired by Nacre to Improve Carbon Fibre Composite Performance	Francois De Luca (Polymer & Composite Engineering (PaCE) Group), Adam J. Clancy (Imperial College London), Giorgio Sernicola (Imperial College London), Milo S. P. Shaffer (Imperial College London), Alexander Bismarck (Polymer & Composite Engineering (PaCE) Group, University of Vienna)	4335
Theme 4 Mechanical Properties
4.8 Track Durability, Creep and Aggressive Environment
Paper ID	Full Paper Title	Author	Paper ID
3309	Aging effects of carbon fiber/bismaleimide composite subjected to thermal cycling	Baifeng Yang, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang (Northwestern Polytechnical University)	3309
2719	PREDICTIVE MODEL AND ACCELERATED CHARACTERIZATION OF VISCOELASTIC RELAXATION IN BOLTED COMPOSITE JOINTS	J.X. Lv 1, Y. Xiao2*, R.G. Pei3 1,2 School of Aerospac Engineering and Applied Mechanics, Tongji University, Shanghai 20092, China (* E-mail: y_xiao@tongji.edu.cn) 3 AVIC Commercial Aircraft Engine Co.,Ltd, Shanghai 200241, China	2719
3104	MARINE ENVIRONMENTAL EFFECTS ON THE BENDING CREEP OF ANGLE-PLY LAMINATED COMPOSITES	Maozhou Meng (University of Derby), Huirong Le (University of Derby), Steve Grove (Plymouth University)	3104
3506	EFFECTS OF HYGROTHERMAL HISTORY ON THE STRUCTURAL PERFORMANCE OF AEROSPACE COMPOSITE MATERIALS: PRELIMINARY EXPERIMENTS AND MASS DIFFUSION MODELS	Kevin C.Y. Chau (University of Bristol), Giacomo Canale (Rolls-Royce plc), Luiz Kawashita (University of Bristol)	3506
3869	Long term creep behavior of a short carbon fiber reinforced PEEK at high temperature	Sylvain Corveleyn (Université de Toulouse, LIEBHERR), Florentin Berthet (Université de Toulouse), Frédéric Lachaud (Université de Toulouse), Claude Rossignol (LIEBHERR)	3869
3944	ACCELERATED CHARACTERIZATION OF VISCOELASTIC RELAXATION IN BOLTED COMPOSITE JOINTS	J.X. Lv (Tongji University), Y. Xiao (Tongji University), R.G. Pei (AVIC Commercial Aircraft Engine Co.,Ltd)	3944
3975	Compressive creep behavior of zirconia_nickel oxide composites	F.A. Huamán-Mamani (Universidad Católica San Pablo), M. Jiménez-Melendo (Universidad de Sevilla)	3975
3992	INTERFACIAL CRACKING BETWEEN AN EPOXY-BASED COMPOSITE COATING AND A RIGID SUBSTRATE UNDER THERMAL LOADING	Helezi Zhou (Huazhong University Science and Technology, The University of Sydney), Hong-Yuan Liu (The University of Sydney), Huamin Zhou (Huazhong University Science and Technology), Xusheng Du (Jinan University), Dong Yan (Huazhong University Science and Technology) Yun Zhang (Huazhong University Science and Technology), Yiu-Wing Mai (The University of Sydney)	3992
4138	Creep properties of polycrystalline Al2O3-based ceramic composites	F.A. Huamán-Mamani (Universidad Católica San Pablo), M. Jiménez-Melendo (Universidad de Sevilla)	4138
4350	STUDY OF DAMAGE CHARACTERISTICS IN COMPOSITE	Gang Zhou (Loughborough University), James Golding (Loughborough University), Xujin Bao (Loughborough University), Weiwei Sun (C-Power (Technology) Ltd)	4350
Theme 5 Multifunctional and Smart Composites
5.1 Track Sensing and Self-Diagnosis
Paper ID	Full Paper Title	Author	Paper ID
2940	AN INVESTIGATION ON THE ELECTRICAL RESPONSE OF DELAMINATED LAMINATES	Michele Zappalorto, Francesco Panozzo, Paolo A. Carraro, Marino Quaresimin(University of Padova)	2940
2847	Evaluation of Interfacial Properties and Damage Sensing on CFRP by VARTM using 3-Dimensional Electrical Resistance Mapping	J. H. Kim (Gyeongsang National University), D. J. Kwon (Gyeongsang National University), P. S. Shin (Gyeongsang National University), K. L. DeVries (The University of Utah), J. M. Park (Gyeongsang National University, The University of Utah)	2847
2971	EFFECT OF PRE-TIGHTENING FORCE ON LAMB WAVE PROPAGATING BEHAVIOUR IN COMPOSITE BOLTED JOINTS	Bin Yang, Fu-Zhen Xuan(East China University of Science and Technology)	2971
3082	FLEXIBLE STRAIN SENSOR BASED ON CNS/SILICONE COMPOSITE FOR HUMAN HEALTH AND MOTION DETECTION	X. G. Yu, Y. Q. Li, S. Y. Fu (Chongqing University)	3082
3097	IMPACT FORCE IDENTIFICATION FOR COMPOSITE STRUCTURES USING A NON-NEGATIVE BAYESIAN REGULARIZATION ALGORITHM	Gang Yan1 and Hao Sun2 1 State Key Laboratory of Mechanics and Control of Mechanical Structures, College of Aerospace Engineering, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China Email: yangang@nuaa.edu.cn 2 Department of Civil & Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA Email: haosun@mit.edu	3097
3153	Health monitoring of high-performance polymer composites with multifunctional fibers	Tibor Czigany, Norbert Forintos, Gergely Hegedus (Budapest University of Technology and Economics)	3153
3234	CNT enabled fabric sensors for monitor resin infusion and curing of composites	Sida Luo (Beihang University), Yong Wang (Beihang University), Guantao Wang (China University of Geosciences), Liuhe Li (Beihang University), Yun Luo (China University of Geosciences)	3234
3582	Damage detection for composites using a Bayesian regularization-based electrical impdedance tomography technique	Gang Yan (Nanjing University of Aeronautics and Astronautics), Zhoujie Yang (Nanjing University of Aeronautics and Astronautics), Yiu-Wing Mai (The University of Sydney), Hao Sun (Massachusetts Institute of Technology)	3582
3638	Effect of current annealing on magnetic and mechanical properties of Co-based amorphous	Y.F. Wang, F.X. Qin, H. Wang ,Y. H.  Li, H.  X. Peng (Zhejiang University)	3638
3726	LOW-COST FABRICATION METHODS FOR ORGANICINORGANIG HYBRID OPTOELECTRONIC STRUCTURE ON A FLEXIBLE SUBSTRATE	David Schmidt, Lin Li, Yongmin Liu, Yingzi Lin (Northeastern University)	3726
3789	A facile strategy for realization of multi-mode flexible sensor capable of contact and contactless	Pei Huang, Xiao-Guang Yu, Wei-Bin Zhu, Yuan-Qing Li, Shao-Yun Fu(Chongqing University)	3789
4150	IN-SITU SENSING OF CARBON FIBERS IN FIBER REINFORCED POLYMER COMPOSITE TUBES FOR BENDING DETECTION	Xiaoying Chen, Zhenyu Wu, Xudong Hu(Zhejiang Sci-Tech University)	4150
4154	Simulation of the Electromechanical Response of Self-Sensing Carbon Nanotube Polymer Nanocomposites	Miguel A.S. Matos, Vito L. Tagarielli, Silvestre T. Pinho(Imperial College London)	4154
4205	EVALUATION OF THERMO-ELASTIC STRESS ANALYSIS (TSA) AND DIGITAL IMAGE CORRELATION (DIC) TECHNIQUES FOR DETECTION OF DELAMINATION CRACK PROPAGATION OF GLASS EPOXY COMPOSITE PLATE UNDER UNI-AXIAL CYCLIC LOADING	Ayad Kakei (University of Southern Queensland, University of KirkUnited Kingdom), J.A. Epaarachchi (University of Southern Queensland), Mainul Islam (University of Southern Queensland), J. Leng (University of Southern Queensland, Harbin Institute of Technology), Anura P. Rathnayake (University of Ruhuna) , N.K. Hettiarachchi (University of Ruhuna)	4205
4206	RAPID WITH DOUBLE-TURN COIL OSH-MPT ARRAY FOR DAMAGE DETECTION IN COMPOSITE PLATE	Zenghua Liu, Xuwen Zhong, Cunfu He, Bin Wu(Beijing University of Technology)	4206
4396	INTEGRATED STRUCTURAL HEALTH MONITORING OF LAMINATED COMPOSITES USING CARBON NANOTUBE YARNS UNDER STATIC LOADING: EXPERIMENTAL RESULTS AND VALIDATION	J. C. Anike1, J. L. Abot1*, J. H. Bills1, D. Gonteski1, T. Kvelashvili1, M. S. Alsubhani1, K. Albin1, S. P. Mortin1, V. C. Gonzaga1, G. N. Oliveira1, P. H. R. M. Silva1, R. B. A. Navarro1, V. R. Barbosa1, K. Belay2, G. P. Behrmann3 and E. Akay1  1Department of Mechanical Engineering, The Catholic University of America  620 Michigan Ave. NE, Washington, DC 20064, USA Email: abot@cua.edu, web page: http://faculty.cua.edu/abot  2Department of Physics, Florida A&M University, USA 2077 East Paul Dirac Dr., Tallahassee, FL 32307 Email: kalayu.belay@famu.edu, web page: http://www.physics.famu.edu/profiles.php?name=Kalayu Belay   3Department of Biomedical Engineering, The Catholic University of America  620 Michigan Ave. NE, Washington, DC 20064, USA Email: behrmann@cua.edu, web page: http://biomedical.cua.edu/faculty-staff/behrmann.cfm	4396
4416	HIGHLY SENSITIVE GRAPHENE COMPOSITE STRAIN SENSOR FROM QUASI-STATIC TO ULTRASONIC WAVE	Feng Duan (CAS Center for Excellence in Nanoscience, The Hong Kong Polytechnic University), Yaozhong Liao (The Hong Kong Polytechnic University), Hao Jin (CAS Center for Excellence in Nanoscience), Zhong Zhang (CAS Center for Excellence in Nanoscience)	4416
4431	A HYBRID DAMAGE DETECTION SYSTEM FOR COMPOSITE PRESSURE VESSEL	Tianxiang Huang1 and Kai-Uwe Schröder2  1, 2 Institute of Structural Mechanics and Lightweight Design, RWTH Aachen University, Wüllnerstrasse 7, 52062 Aachen, Germany. http://www.sla.rwth-aachen.de 1 tianxiang.huang@sla.rwth-aachen.de 2 kai-uwe.schroeder@sla.rwth-aachen.de	4431
4631	CEMENT BASED NANOCOMPOSITES WITH SELF-DIAGNOSTIC CHARACTERISTICS	Zoi S. Metaxa, Stavros K. Kourkoulis(National Technical University of Athens)	4631
4652	A hybrid damage detection system for composite pressure vessel	Tianxiang Huang, Kai-Uwe Schroder(RWTH Aachen University)	4652
Theme 5 Multifunctional and Smart Composites
5.2 Track Actuation and Dynamic Response
Paper ID	Full Paper Title	Author	Paper ID
4085	An Investigation of the Viscoelastic Behaviour of Interleaved Composite with Shape Memory Capability	B. Zhang (Imperial College London), P. Robinson (Imperial College London), A. Bismarck (Imperial College London, University of Vienna), H.A. Maples (University of Vienna), C. Burgstaller (Transfercenter für Kunststofftechnik (TCKT))	4085
2944	Prediction of Fatigue Life of Composite Laminates Using Laser Ultrasonic Method	Chongcong Tao, Jinhao Qiu, Hongli Ji, Chao Zhang, Zhan Wang, Weixing Yao(Nanjing University of Aeronautics and Astronautics)	2944
Theme 5 Multifunctional and Smart Composites
5.3 Track Stimuli Responsiveness and Shape Reconfiguration
Paper ID	Full Paper Title	Author	Paper ID
3238	shape-memory polymer composites selectively responsive to near-infrared lights of two wavelengths	Liang Fang, Tianyu Fang, Shunping Chen, Chunhua Lu, Zhongzi Xu (Nanjing Tech University)	3238
3000	Development of dynamic deployment simulation of thin composite layer for shape morphing structure	Masaaki Nishikawa (Kyoto University), KeisUnited Kingdome Nagata (Kyoto University), Yuta Naito (Toray Industries Inc.), Masaki Hojo (Kyoto University), Naoki Matsuda (Kyoto University)	3000
3246	EVALUATING THE TEMPERATURE AND GLASS FIBRE REINFORCEMENT EFFECTS ON THE DAMPING PROPERTIES OF THE SHAPE MEMORY POLYMERS	Wessam Al Azzawi (University of Southern Queensland, Diyala University), J.A. Epaarachchi (University of Southern Queensland), Jinsong Leng (Harbin institute of technology)	3246
3341	THERMO-MECHANICAL PROPERTIES OF 2.5D ANGLE-INTERLOCK WOVEN SHAPE MEMORY POLYMER COMPOSITES	Huiyu Sun, Yun Tang, Jianping Gu (Nanjing University of Aeronautics and Astronautics)	3341
3457	RESEARCH ON THERMOMECHANICAL PROPERTY OF WOVEN FABRIC REINFORCED SHAPE MEMORY POLYMER COMPOSITES	Jianping Gu1,2, Huiyu Sun2 Shaoxiang Wang2 1 Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology, School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China, gujianping@njit.edu.cn 2 State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China, hysun@nuaa.edu.cn	3457
3486	THERMO-MECHANICAL PROPERTIES OF 2.5D ANGLE-INTERLOCK WOVEN SHAPE MEMORY POLYMER COMPOSITES	Huiyu Sun1, Yun Tang2 and Jianping Gu3 1 State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China. hysun@nuaa.edu.cn	3486
3855	GRAPHENE-REINFORCED CHITOSAN/PDMS MORPHING COMPOSITES	Zhenying Huang, Xingmin Wei, Hongxiang Zhai, Leping Cai, Wenqiang Hu (Beijing Jiaotong University)	3855
4019	CHARACTERIZATIONS OF THREE-DIMENSIONAL DEPLOYMENT BEHAVIOR OF SHAPE MEMORY POLYMER COMPOSITE ANTENNAS	Yongsan An (Seoul National University), Jinsu Kim (Seoul National University), Seok Bin Hong (Seoul National University), Joon hyeok Jang (Seoul National University), Nam Seo Goo (KonkUnited Kingdom University), Woong-Ryeol Yu (Seoul National University)	4019
4418	SMART SURFACES FABRICATED BASED ON  SHAPE MEMORY POLYMER	Lingyu Zhao1,2, Jun Zhao1* and Zhong Zhang1*  1 CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, 100190, China (* E-mail: zhong.zhang@nanoctr.cn; zhaoj@nanoctr.cn) 2 Academy for Advanced Interdisciplinary Studies, Peking University, Beijing, 100871, China	4418
4477	Polybutadiene–Poly(styrene-co-4-vinylpyridine)-Based Supramolecular Shape Memory Elastomers Using Metal Coordination Interactions	Fang Xie (Harbin Institute of Technology), R. A. Weiss (The University of Akron), Jinsong Leng (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology)	4477
4485	LIGHT-ACTUATED REVERSIBLE SHAPE MEMORY EFFECT OF A POLYMER COMPOSITE	Wenbing Lia, Yanju Liub,  Jinsong Leng(Harbin Institute of Technology)	4485
4494	Learning from the Earwig Wing: A Bioinspired Approach towards Fast Morphing Structures using Multistability	Dr. Jakob Faber (ETH Zürich), Prof. Dr. André R. Studart, (ETH Zürich), Prof. Dr. Andres F. Arrieta, (Purdue University)	4494
4517	4D printing of Poly(lactic acid)-based shape memory polymers and shape memory nanocomposites	Hongqiu Wei, Qiwei Zhang, Yongtao Yao, Liwu Liu, Yanju Liu, Jinsong Leng (Harbin Institute of Technology)	4517
4525	Gold nanoparticles/poly (vinyl alcohol) shape memory nanocomposites	Wenxin Wang (Harbin Institute of Technology, Nanyang Technological University), Xianbin Liu (Nanyang Technological University), Wei Xu (Harbin Institute of Technology), Hongqiu Wei (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology), Yu Han (Harbin Institute of Technology), Peng Jin (Harbin Institute of Technology), Hejun Du (Nanyang Technological University), Jinsong Leng (Harbin Institute of Technology)	4525
4526	extended abstract -HUMIDITY-SENSITIVE SMART CLOTHES WITH REVERSIBLE RESPONSE	Fenghua Zhang, Ying Zhon, Yanjiu Liud, Sungho Jine, Renkun Chenf, Jinsong Leng (Harbin Institute of Technology)	4526
4540	4D Additive Manufacturing of Structural Composites with Programmed Stimuli-Response	R.S. Trask, A.B. Baker , T.M. Llewellyn-Jones (University of Bath)	4540
4572	Designing pattern-transforming metamaterials for soft actuators	Yuzhen Chen (University of California, Los Angeles), Dian Yang (Harvard University), George M. Whitesides (Harvard University), Zhigang Suo (Harvard University), Lihua Jin (University of California, Los Angeles)	4572
4599	3D printed biodegradable shape memory polymer stimulated both electrically and magnetically	Xiaomeng Wang, Jun Zhao, Zhong Zhang(National Center for Nanoscience and Technology, Beijing)	4599
4642	RESEARCH ON THERMOMECHANICAL PROPERTY OF WOVEN FABRIC REINFORCED SHAPE MEMORY POLYMER COMPOSITES	Jianping Gu (Nanjing Institute of Technology, Nanjing University of Aeronautics and Astronautics), Huiyu Sun (Nanjing University of Aeronautics and Astronautics), Shaoxiang Wang (Nanjing University of Aeronautics and Astronautics)	4642
Theme 5 Multifunctional and Smart Composites
5.4 Track Self-Healing and Bio-inspired Designs
Paper ID	Full Paper Title	Author	Paper ID
2993	IMPACT RECOVERY OF SELF-HEALING COMPOSITES BASED ON A SUPRAMOLECULAR POLYMER MATRIX	Federica Sordo, Lucien Berret, Baris Caglar, Véronique Michaud (Ecole Polytechnique Fédérale de LaUnited States of Americanne (EPFL))	2993
2904	Smart Self-Healing Asphalt Composite Materials Using Microcapsules Containing Rejuvenator	Jun-Feng Su, Shan Han, Xiao-Long Zhang, Ying-Yuan Wang(Tianjin Polytechnic University)	2904
2905	Self-Healing Bitumen Using Biomimetic Capillaries Hollow Fibers: Fabrication, Microstructure and Properties	Jun-Feng Su, Xiao-Long Zhang, Shan Han, Ying-Yuan Wang (Tianjin Polytechnic University)	2905
3223	Self-healing CFRP composites using multiple short-microvascular-channels in through-thickness direction	Yoshiki Kimura (Tokyo university of science)	3223
3280	Self-assembled Graphene Oxide Microcapsules Reinforced Waterborne Polyurethane Composite Coatings for Self-healing Properties	Jing Li, Qingkang Feng, Jincan Cui, Junhe Yang(University of Shanghai for Science and Technology)	3280
3445	THE SYNTHESIS OF POLYURETHANE MICROCAPSULES AND EVALUATION OF SELF-HEALING PAINT PROTECTION PROPERTIES	Sooyoul, Park1, Eunjoo Koh2   1Green Chemistry Process Research Division, Interface Chemical materials and Process Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon, 305-600, Republic of Korea, sypark@krict.re.kr 2Dept. of Biotechnology, Global Campus, Kyung Hee University,  Deogyeong-daero, Gheung-gu, Yongin-si, Gyeonggi-do, 1732, Republic of Korea	3445
3450	Impact resistance and recovery in SMA stitched E-glass reinforced Poly(ε-caprolactone)/epoxy composites	Amaël Cohades, Malvina Pauchard, Véronique Michaud(Ecole Polytechnique Fédérale de LaUnited States of Americanne (EPFL))	3450
3510	Preparation of aramid-BN reinforced self-healable nanocomposites and their performance	Lixin Xing, Li Liu , Xueqin Wang, Yudong Huang (Harbin Institute of Technology)	3510
3533	Influence of healing rate on strength of hierarchical fiber bundle materials	X. L. Ji, L. X. Li(Xi’an Jiaotong University)	3533
3871	Investigating the potential of hierarchical non-self-similar discontinuous composites	Joël Henry, Soraia Pimenta (Imperial College London)	3871
3908	CFRP composite with nacre-inspired micro-structure and fractal-textured interface	Federico Narducci, Silvestre T. Pinho (Imperial College London)	3908
4092	DEVELOPMENT OF SELF-HEALING TECHNIQUES FOR FIBRE REINFORCED COMPOSITES: RECENT ADVANCES ON INTRINSIC SELF-HEALING MECHANISM	A. Kotrotsos, S. Tsantzalis,P. Tsokanas , V. Kostopoulos (University of Patras)	4092
4175	Impact Resistant Designs from the Cuticle of the Mantis Shrimp	Nicholas A. Yaraghi, David Restrepo Arango, Jesus Rivera, Pablo Zavattieri, David Kisailus	4175
4300	COMPRESSION RESISTANT DESIGNS FROM THE EXOSKELETON OF A TOUGH BEETLE	Jesus Rivera, Nicholas A. Yaraghi, David Restrepo Arango, Pablo Zavattieri, David Kisailus	4300
4382	Mechanical properties of additively manufactured composite materials with ultrasonically assembled reinforcement.	Thomas M. Llewellyn-Jones (University of Bath), Bruce D. Drinkwater (University of Bristol), Richard S. Trask (University of Bath)	4382
4439	MAGNETICALLY ACTUATED FUNCTIONAL GRADIENT NANOCOMPOSITES FOR STRONG AND DURABLE BIOINSPIRED INTERFACES/SURFACES	Zhengzhi Wang (Wuhan University), Xiaoming Shi (University of Science and Technology Beijing), Houbing Huang (University of Science and Technology Beijing), Chenmin Yao (Wuhan University), Wen Xie (Wuhan University), Cui Huang (Wuhan University), Ping Gu (University of Science and Technology of China), Xingqiao Ma (University of Science and Technology Beijing), Zuoqi Zhang (Wuhan University), Long-qing Chen (The Pennsylvania State University)	4439
4608	A THERMODYNAMIC ANALYSIS OF THE SHAPE MEMORY ASSISTED SELF HEALING POLYMERS	Yiqi Mao, Meide Yang, Shujuan Hou (University Changsha China)	4608
4619	Interfacial Structure and Damage Mitigation from the Radular Teeth of Cryptochiton stelleri	Steven Herrera, Ruoheng Zhao, Lessa Kay Grunenfelder, Enrique Escobar de Obaldia, David Restrepo Arango, Pablo Zavattieri, David Kisailus	4619
Theme 5 Multifunctional and Smart Composites
5.5 Track Energy Harvesting and Storage
Paper ID	Full Paper Title	Author	Paper ID
2959	STRUCTURAL BATTERY COMPOSITES – ROLES OF CONSTITUENTS AND DEVICE ARCHITECURE	Leif E. Asp(Chalmers University of Technology)	2959
2890	TEMPERATURE-RELATED PERFORMANCE OF A DIELECTRIC ELASTOMER GENERATOR WITH CONSIDERATION OF VISCOELASTICITY AND FAILURE MODES	Shoue Chen (Hunan University), Zhicheng He (Hunan University), Eric Li (The Chinese University of Hong Kong)	2890
2895	DESIGN AND TEST ON THE NONLINEAR PE-EM HYBRID ENERGY HARVESTING STRUCTURE	Hai-peng LIU1, Shi-qiao GAO 2 and Lei JIN 3 1 State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, China, lhp@bit.edu.cn 2 State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, China, gaoshq@bit.edu.cn 3 School of Mechatronical Engineering, Beijing Institute of Technology, China, jinlei@bit.edu.cn	2895
3004	FACILE SYNTHESIS OF NICKEL MANGANESE SULFIDE ANCHORED GRAPHITIC CARBON NITRIDE/GRAPHENE ELECTRODE FOR SUPERCAPACITOR APPLICATION	Parthasarathi Bandyopadhyay1, Thanh Tuan Nguyen1, Dai Jiu Yi1, Nam Hoon Kim1* and  Joong Hee Lee1,2*.  1 Advanced Materials Institute of BIN Technology (BK21 plus Global) & Dept. of BIN Convergence Technology, Chonbuk National University, Jeonju, Jeonbuk 54896, Republic of Korea. 2 Carbon Composite Research Centre, Department of Polymer & Nanoscience and Technology, Chonbuk National University Jeonju, Jeonbuk 54896, Republic of Korea. (*jhl@chonbuk.ac.kr and nhk@chonbuk.ac.kr)	3004
3227	APPLICATION OF FLEX-COMPRESSIVE PIEZOELECTRIC ENERGY HARVESTING CELL IN RAILWAY SYSTEM	Xianfeng Wang1 and Zhifei Shi1  1 School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, P. R. China	3227
3370	Nitrogen-doped carbon for lithium-ion batteries	Jinle Lan, Yuan Liu, Yunhua Yu , Xiaoping Yang (Beijing University of Chemical Technology)	3370
3428	Functionalized high-k Nanowires Polymer Nanocomposites with Enhance Energy Storage Capability	Guanyao Wang, Xingyi Huang, Pingkai Jiang (Shanghai Jiao Tong University)	3428
3514	Comparison of Electrical and Mechanical Properties between PMN-PT and PZT Thin Films in Energy Harvester Application	Y.H. Fu, W. H. Tang, S. C. Lin, T. K. Lin , C. T. Chen, W.J. Wu (National Taiwan University)	3514
3881	FLEXIBLE SUPERCAPACITORS BASED ON ALIGNED CARBON NANOTUBES WITH UNIQUE NANOSTRUCTURE	Yue Zhou, Estelle Cohen , Brian L. Wardle (Massachusetts Institute of Technology)	3881
3961	HEMP HURD DERIVED ACTIVATED CARBON FOR CO2 ADSORPTION	Shan Liu (University of Southern Queensland, University of Queensland), Lei Ge (University of Queensland), Zhonghua Zhu (University of Queensland), Hao Wang (University of Southern Queensland)	3961
4325	Giant Electrostriction of Soft Nanocomposites for Mechanical Energy Harvesting	Jinkai Yuan, Alan Luna, Wilfrid Neri, Cécile Zakri, Annie Colin, Philippe Poulin (Université de Bordeaux)	4325
4486	Solution processed microbatteries for energy harvesting applications	Xing Xing, Byoung-Sun Lee,  Ping Liu (University of California, San Diego)	4486
4498	PREPARATION AND PROPERTIES OF COMPOSITE SOLID POLYMER ELECTROLYTE FOR STRUCTURAL CAPACITOR	Bong-Sang Cho, Do Hyung Park, Jun Choi, Da Hee Choi , Ki-Young Kim (Korea Institute of Industrial Technology)	4498
4597	Core-double-shell structured hyperbranched aromatic polyamide functionalized graphene nanosheets-poly(p-phenylene benzobisoxazole) nanocomposite films with improved dielectric properties and thermostability	Hao Feng, Jiasong Hua, Zhe Zhang, Guifang Liu, Qixin Zhuang (East China University of Science and Technology)	4597
4660	PVDF-based Flexible energy harvester from human motion	Junyi Cao, Jian Yu, Yunlong Cai, Wei Wang, Lin Jing( Xi’an Jiaotong University)	4660
4676	Dual resonant rectilinear-to-rotary oscillator for broadband electromagnetic energy harvesting with frequency up-conversion	W. Deng, Y. Wang (Stony Brook University)	4676
Theme 5 Multifunctional and Smart Composites
5.6 Track Smart Structures
Paper ID	Full Paper Title	Author	Paper ID
3097	Impact force identification for composites using a non-negative Bayesian regularization algorithm	Gang Yan (Nanjing University of Aeronautics and Astronautics), Hao Sun (Massachusetts Institute of Technology), Yi He (Nanjing University of Aeronautics and Astronautics)	3097
2971	EFFECT OF PRE-TIGHTENING FORCE ON LAMB WAVE PROPAGATING BEHAVIOUR IN COMPOSITE BOLTED JOINTS	Kang Yang, Bin Yang*, Fu-Zhen Xuan  School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai, China. Corresponding authors: E-mail: yangbin@ecust.edu.cn	2971
2795	Application modeling of flex-compressive piezoelectric energy harvesting cell in railway system	Xianfeng Wang  Zhifei Shi* School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, P. R. China	2795
2737	DEFORMATION AND RECOVERY PROPERTIES OF SHAPE MEMORY POLYMER COMPOSITES TUBE	Tianzhen Liu1, Liwu Liu1, Xin Lan2, Yanju Liu1, and Jinsong Leng2,* 1Department of Astronautical Science and Mechanics, Harbin Institute of Technology (HIT), P.O. Box 301, No. 92 West Dazhi Street, Harbin 150001, People’s Republic of China 2Centre for Composite Materials, Science Park of Harbin Institute of Technology (HIT), P.O. Box 3011, No. 2 YiKuang Street, Harbin 150080, China *Corresponding author: lengjs@hit.edu.cn	2737
3034	A Probabilistic Approach to Structural Health Monitoring of Composite Aircraft Nacelles: Implementation and Validation	Nazih Mechbal, Marc Rebillat, Mikhail Guskov (UMR CNRS 8006, Arts et Métiers ParisTech (ENSAM))	3034
3162	DESIGNING ULTRASENSITIVE AND STRECHABLE STRAIN SENSORS BY TAILORED FRAGMENTATION OF CARBON-BASED CONDUCTORS	G. Lubineau, Y. Xin, X. Xu, J. Zhou (King Abdullah University of Science and Technology (KAUST))	3162
3210	Polymer composite material with inherent function of damage visual indication	O. Bulderberga , A. Aniskevich (University of Latvia)	3210
3234	CNT ENABLED FABRIC SENSORS FOR MONITOR RESIN INFUSION AND CURING OF COMPOSITES	ZHAI Yujiang1, WANG Guantao1,2, WANG Yong1, LUO Sida *1, 1 School of Mechanical Engineering & Automation, International Research Institute for Multidisciplinary Science, Beihang University, Beijing, 100191, China 2 Center of Safety Research, School of Engineering and Technology, China University of Geosciences, Beijing, 100083, China.	3234
3246	EVALUATING THE TEMPERATURE AND GLASS FIBRE REINFORCEMENT EFFECTS ON THE DAMPING PROPERTIES OF THE SHAPE MEMORY POLYMERS	Wessam Al Azzawi1,2*, Jayantha A. Epaarachchi1 and Jinsong Leng3 1 Centre for Future Materials (CFM), Faculty of Health, Engineering and Sciences, University of Southern Queensland, Toowoomba, Queensland 4350, Australia (*E-mail: wisamazawi@yahoo.com) 2 College of Engineering, Diyala University, Baqubah, Diyala, Iraq 3 Centre of composite materials and structures, Harbin institute of technology (HT), Harbin, China	3246
3397	ELASTICPROPERTIESOF3DADDINGRIBSRE-ENTRANTCELLULARSTRUCTURE	XiangLi1,Zi-XingLu2,Zhen-YuYang3 1 InstituteofSolidMechanics,BeihangUniversity,Beijing100083,P.R.China,18796001412.com	3397
3227	Application of flex-compressive piezoelectric energy harvesting cell in railway system	Wianfeng Wang , Zhifei Shi (Beijing Jiaotong University)	3227
3406	Numerical analysis and simulation of bimorph macro-fiber composite undergoing large displacements and rotations	Zhang Shu-yang (Northwestern Polytechnical University), Zhang Shun-qi (Northwestern Polytechnical University, Dalian University of Technology), Wang Zhan-xi (Northwestern Polytechnical University), Qin Xian-sheng (Northwestern Polytechnical University)	3406
3417	Automobile brake squeal noise suppression using piezoelectric=based devices	Jae Han Park, Jeong Ha Song, Gyuhae Park (Chonnam National University); Tae Ho Jung, Jeong Kyu Kim (Hyunai Motor Company)	3417
3637	Multiscale Metacomposites incorporating Carbon Nanotube-Ferromagnetic Microwire Hybrid Fibers	D. Estévez, F.X. Qin*, Y.F. Wang, Y. Luo, H. Wang and H.X.Peng  Institute for Composites Science Innovation（InCS）, School of Materials Science and Engineering, Zhejiang University, Zheda Road, Hangzhou, 310027, PR. China	3637
3774	High Performance Piezo Electric Nanocomposite Sensor Nodes for Structural Health Monitoring	Mohammad Fotouhi, Bill Xiao, Thomas Pozegic, Meisam Jalalvand, Ian Hamerton,Michael R.Wisnom (University of Bristo)	3774
4092	DEVELOPMENT OF SELF-HEALING TECHNIQUES FOR FIBRE REINFORCED COMPOSITES: RECENT ADVANCES ON INTRINSIC SELF-HEALING MECHANISM	A. Kotrotsos1, S. Tsantzalis1, P. Tsokanas1 and V. Kostopoulos1  1 Applied Mechanics Laboratory, Department of Mechanical Engineering and Aeronautics, University of Patras, 26504, Rio-Patras, Greece Email: kostopoulos@mech.upatras.gr, website: www.aml.mech.upatras.gr	4092
4396	INTEGRATED STRUCTURAL HEALTH MONITORING OF LAMINATED COMPOSITES USING CARBON NANOTUBE YARNS UNDER STATIC LOADING: EXPERIMENTAL RESULTS AND VALIDATION	J. L. Abot, J. C. Anike, J. H. Bills, D. Gonteski, T. Kvelashvili, M. S. Alsubhani, K. Albin, S. P. Mortin, V. C. Gonzaga, G. N. Oliveira, P. H. R. M. Silva, R. B. A. Navarro, V. R. Barbosa (The Catholic University of America), K. Belay (Florida A&M University), G. P. Behrmann (The Catholic University of America), E. Akay (The Catholic University of America)	4396
4418	SMART SURFACES FABRICATED BASED ON SHAPE MEMORY POLYMER	Lingyu Zhao (National Center for Nanoscience and Technology, Beijing, Peking University), Jun Zhao (National Center for Nanoscience and Technology, Beijing), Zhong Zhang (National Center for Nanoscience and Technology, Beijing)	4418
4443	Analysis of Concrete Columns With Shape Memory Alloy Reinforced	Zhen-qing Wang, Jing-biao Liu, Xiao-yu Sun, Li-dan Xv (Harbin Engineering University)	4443
4468	------FRACTURE FIXATOR CONCEPT BASED ON SHAPE MEMORY POLYMER	Wei Zhao, Liwu Liu, Xin Lan, Jinsong Leng, Yanju Liu(Harbin Institute of Technology)	4468
4510	A BENDING ACTUATOR BASED ON EXTENSILE PAM AND ITS APPLICATIONS FOR SOFT ROBOTICS	Qinghua Guan, Jian Sun, Yanju Liu , Jinsong Leng (Harbin Institute of Technology)	4510
Theme 5 Multifunctional and Smart Composites
5.7 Track Coupled Properties and Multi-Physics Models
Paper ID	Full Paper Title	Author	Paper ID
4651	STRUCTURAL MECHANIC APPROACH FOR PREDICTION OF ELECTRICAL CONDUCTIVITY OF GLASS FIBRE REINFORCED COMPOSITE WITH CNT-MODIFIED EPOXY MATRIX	Andrey Aniskevich, Olesja Starkova (University of Latvia)	4651
4594	MODELLING OF LIGHTNING STRIKE DAMAGE OF CFRP LAMINATES CAUSED BY SUDDEN SURFACE PLASMA EXPANSION	Kunkun Fu (The University of Sydney), Lin Ye (The University of Sydney), Li Chang (The University of Sydney), Chunhui Yang (Western Sydney University)	4594
4633	THERMODYNAMICS AND INSTABILITY OF DIELECTRIC ELASTOMER	LW. Liu1,*, YJ. Liu2 and JS. Leng3 1 Department of Astronautical Science and Mechanics, Harbin Institute of Technology, Harbin, China, liuliwu_006@163.com	4633
Theme 5 Multifunctional and Smart Composites
5.8 Track Design and Manufacture for Multifunctionality
Paper ID	Full Paper Title	Author	Paper ID
3248	Manufacturing of Multifunctional soft composites with integrated proximity and tactile sensing	Nikolaus Correll (University of Colorado, Robotic Materials Inc)	3248
3148	ALIGNMENT OF NANO AND MICRON DIAMETER CARBON FILLERS IN EPOXY VIA ELECTRIC FIELD	Anil R. Ravindran (RMIT University), Raj B. Ladani (RMIT University), Shuying Wu (RMIT University), Anthony J. Kinloch (Imperial College London), Chun H. Wang (RMIT University, University of New South Wales), Adrian P. Mouritz (RMIT University)	3148
3422	TOWARDS MULTIFUNCTIONAL COMPOSITES BY CARBON NANOTUBES-BASED NANO/MICRO HYBRID STRUCTURES	Delong He, Jinbo Bai (Université Paris-Saclay)	3422
3475	CARBON FIBER PREPREG COMPOSITE LAMINATES CURED VIA CONDUCTIVE CURING USING NANOENGINEERED NANOCOMPOSITE HEATERS	Jeonyoon Lee (Massachusetts Institute of Technology), Frederick Daso (Massachusetts Institute of Technology), Seth S. Kessler (Metis Design Corporation), Brian L. Wardle (Massachusetts Institute of Technology)	3475
3609	Advances in Poro-Vascular Composites: Toward Non-Mechanical Surface Roughness Control	Russell C. Reid, James P. Thomas, Marriner H. Merrill(U.S. Naval Research Laboratory)	3609
3637	Multiscale Metacomposites incorporating Carbon Nanotube-Ferromagnetic Microwire Hybrid Fibers	D. Estévez, F.X. Qin, H. Wang, H.X.Peng (Zhejiang University)	3637
3814	Development of carbon nano-tubes on carbonized-cotton for multi-functional applications	Masud Rana (University of Chinese Academy of Sciences), Peng-Cheng Ma (Chinese Academy of Sciences)	3814
3815	Laminate Design with Non-Standard Ply Angles for Optimised In-Plane Performance	M.W.D . Nielsen, K. Johnson, A.T. Rhead, R. Butler (University of Bath)	3815
3820	IMPREGNATION STRATEGIES FOR GRADIENT FUNCTIONALIZATION OF FRP STRUCTURES WITH NANOPARTICLE-MODIFIED RESIN SYSTEMS	Dilmurat Abliz, Gerhard Ziegmann (TU Clausthal)	3820
3928	UNDERSTANDING STRUCTURAL RECONSTITUTION IN POLY-MERIC MATERIALS TO ACHIEVE IN-SITU PROPERTY CONTROL	M. Heili, A. Bielawski, K. Sebeck, M. Aldridge,  J. Kieffer (University Of Michigan, Ann Arbor)	3928
3942	LARGE-SCALE SYNTHESIS AND CONNECTIONS ADJUSTMENT OF THE CARBON NANOTUBE FOAMS	Han Wang (Beihang University), Min Li (Beihang University), Weibang Lu (Suzhou Institute of Nano-Tech and Nano-Bionics), Yizhou Gu (Beihang University), Shaokai Wang (Beihang University), Qingwen Li (Suzhou Institute of Nano-Tech and Nano-Bionics), Zuoguang Zhang (Beihang University)	3942
4178	full_paper_Bistable Composite Laminates for Direct and Actuated Deformation	Oliver Myers (Clemson University)	4178
4222	Morphing Wings for Harvesting and Storing Solar Energy in Mixed-Mode Unmanned Air Vehicles	Hugh Alan Bruck (University of Maryland)	4222
4245	Delamination Toughening and Healing Performance of 3D Woven Composites	Raj B. Ladani (RMIT University), Khomkrit Pingkarawat (RMIT University), Chun H. Wang (University of New South Wales), Adrian P. Mouritz (RMIT University)	4245
4337	Dynamic compressive response of 3D printed thermoplastic polyurethane honeycombs with graded densities	Simon R.G. Bates (University of Bath), Ian R. Farrow (University of Bristol), Richard S. Trask (University of Bath)	4337
4355	Multifunctional pattern reconfigurable wrist antenna structures based on bistable composite cylinderical shells for on-body applications	Jianqiang Hu, Yanqi Li, Fuhong Dai (Harbin Institute of Technology)	4355
4569	DESIGN AND FABRICATION OF A MULTI-LAYER RADAR ABSORBING COMPOSITE STRUCTURE	Hongshuai Lei (Beijing Institute of Technology), Zhili Zhou (Beijing Institute of Technology), Changxian Wang (Peking University), Mingji Chen (Beijing Institute of Technology), Huimin Li (Beijing Institute of Technology), Daining Fang (Beijing Institute of Technology, Peking University)	4569
4590	FABRICATION OF SOFT COMPOSITE FLAPPING ACTUATOR	Min-Sik Kim1, Sung-Hyuk Song2 and Sung-Hoon Ahn* 1 Department of Mechanical and Aerospace Engineering, Seoul National University, Korea. Email:minsoura@snu.ac.kr, Web:fab.snu.ac.kr	4590
4626	DESIGN AND FABRICATION OF MECHANICALLY FLEXIBLE THREE-DIMENSIONAL GRAPHENE/POLYMER NANOCOMPOSITES FOR MULTIFUNCTIONAL APPLICATIONS	Long-Cheng Tang 1, 2 *, Li Zhao 1, Li-Li Hu 1, Li-Zhi Guan 1, Li-Xiu Gong 1, Yiu-Wing Mai 2 1 Key Laboratory of Organosilicon Chemistry and Material Technology of Ministry of Education, Hangzhou Normal University, Hangzhou 311121, PR China; e-mail: lctang@hznu.edu.cn. 2 Centre for Advanced Materials Technology (CAMT), School of Aerospace, Mechanical and Mechatronic Engineering J07, The University of Sydney, Sydney, NSW, 2006, Australia	4626
4629	The mechanics while bridging pristine graphene patches for large area or 3-Dimensional structure	Yujie Wei (LNM, Institute of Mechanics)	4629
Theme 5 Multifunctional and Smart Composites
5.9 Track Acoustic Meta-Composite
Paper ID	Full Paper Title	Author	Paper ID
3167	MEASUREMENT OF SURFACE ACOUSTIC WAVE USING AIR COUPLED TRANSDUCER AND LASER DOPPLER VIBROMETER	Weitao Yuan, Dongbo Zhang, Jinfeng Zhao(Tongji University), Bernard Bonello( Institut des NanoSciences de Paris), Yongdong Pan, Zheng Zhong (Tongji University)	3167
2690	TUNABILITY OF PHONONIC CRYSTALS WITH ELLIPTICAL HOLES AND INCLUSIONS	N. Gao , R.H. Bao1,2,3 and W.Q. Chen1,2,3 1 Department of Engineering Mechanics, Zhejiang University, Hangzhou, Zhejiang, 310027, China 2 Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Zhejiang University, Hangzhou 310027, China 3 Soft Matter Research Center (SMRC), Zhejiang University, Hangzhou 310027, China	2690
2692	A NOVEL DESIGN OF PHONONIC CRYSTALS WITH TUNABLE BAND GAPS VIA LARGE DEFORMATION	Yilan Huang1, Ronghao Bao1,2,3,  and Weiqiu Chen1,2,3 1 Department of Engineering Mechanics, Zhejiang University, Hangzhou, Zhejiang, 310027, China 2 Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Zhejiang University, Hangzhou 310027, P. R. China 3 Soft Matter Research Center (SMRC), Zhejiang University, Hangzhou 310027, China	2692
2925	Vibration band gaps of two-dimensional improved phononic crystals	Guochang Lin, Yuliang Li , Songqiao Chen (Harbin Institute of Technology)	2925
2823	Plate-type Acoustic Metamaterials	Fuyin Ma, Jiu Hui Wu( Xi’an Jiaotong University)	2823
3053	TUNABLE ACOUSTIC METAMATERIAL WITH AUXETIC BEHAVIOR	Jia-Hao He and Hsin-Haou Huang Department of Engineering Science and Ocean Engineering, National Taiwan University, Taipei, Taiwan, China r04525079@ntu.edu.tw, hsinhaouhuang@ntu.edu.tw	3053
4315	ELECTRICAL CONTROL OF ELASTIC WAVE IN RANDOMLY DISORDERED PHONONIC CRYSTALS BY EXTERNAL PIEZOELECTRIC CIRCUIT	Yi-Ze Wang, Qi Luo , Yue-Sheng Wang(Beijing Jiaotong University)	4315
4317	Dynamic homogenization for phononic metasolids with consideration of willis coupling	Yan-Feng Wang, Yue-Sheng Wang(Beijing Jiaotong University), Vincent Laude(Université de Bourgogne Franche-Comté)	4317
4324	AN EXPERIMENTAL EVIDENCE OF THE WILLIS-FORM EQUATIONS AND THE RELATED APPLICATIONS	ZH Xiang , RW Yao, HX Gao, YX Sun , XD Yuan(Tsinghua University)	4324
4352	A HYBRID ELASTIC METAMATERIAL WITH TUNABLE BENDING STIFFNESS	Yangyang Chen, Hussein Nassar, Hui Chen, Xianchen Xu, Andrew N. Norris, Guoliang Huang ( Department of Mechanical and Aerospace Engineering, University of Missouri, Department of Mechanical and Aerospace Engineering, Rutgers University)	4352
4370	ANALYTIC MODEL OF ACOUSTIC SUPERABSORPTION INDUCED BY METAMATERIALS	Yong Cheng, Yanfen Jiang, Linlin Geng, Yunhong Liao, Jianzhu Dong,  Xiaoming Zhou(Beijing Institute of Technology)	4370
4380	TRANSMISSION PROPERTIES OF ANISOTROPIC PENTAMODE MATERIAL AND FILTERING APPLICATION ON ELASTIC WAVE	Mingye Zheng, E Song , Xiaoning Liu(Beijing Institute of Technology)	4380
4413	The Search for Edge States (Boundary Modes) in Mechanical Metamaterials	Massimo Ruzzene D. Guggenheim School of Aerospace Engineering, G.W. Woodruff School of Mechanical Engineering Georgia Institute of Technology Atlanta, GA	4413
4438	DESIGN OF ACOUSTIC HYPERBOLIC METAMATERIALS BASED ON TOPOLOGY OPTIMIZATION	Hao-Wen Dong, Sheng-Dong Zhao, Yue-Sheng Wang(Beijing Jiaotong University) , Ch Zhang(University of Siegen)	4438
4448	ANALYSIS ON THE BAND-GAP PROPERTY OF THE LIGHT-WEIGHT PERIODIC STRUCTURE BY THE SPECTRAL ELEMENT METHOD	Zhi-Jing Wu, Feng-Ming Li (Harbin Engineering University)	4448
4544	The Search for Edge States in Mechanical Metamaterials	Massimo Ruzzene (Georgia Institute of Technology)	4544
4675	BROADBAND CLOAK FOR UNDERWATER ACOUSTICS	Yi Chen, Xiaoning Liu & Gengkai Hu School of Aerospace Engineering, Beijing Institute of Technology, Beijing, China	4675
4684	WAVE PROPAGATION IN PLATES WITH PERIODIC ARRAY OF IMPERFECT ACOUSTIC BLACK HOLES	Bing Han, Hongli Ji , Jinhao Qiu (Nanjing University of Aeronautics and Astronautics)	4684
Theme 6 Processing and Manufacturing
6.1 Track Process Modelling
Paper ID	Full Paper Title	Author	Paper ID
2939	2D Numerical Modelling of the Resin Injection Pultrusion Process Including Experimental Resin Kinetics and Temperature Validation	F. S. Rasmussen (Technical University of Denmark), M. R. Sonne (Technical University of Denmark), M. Larsen (Fiberline Composites A/S), J. Spangenberg (Technical University of Denmark), L. Lilleheden (Fiberline Composites A/S), J. H. Hattel (Technical University of Denmark)	2939
3001	DEVELOPMENT OF NEW SIMULATION TECHNOLOGY FOR COMPRESSION MOLDING OF LONG FIBER REINFORCED PLASTICS	Shinya Hayashi1, Hao Chen2, Wei Hu2  1JSOL Corporation 2-18-25 Marunouchi, Naka-ku, Nagoya, Aichi, 460-0002, Japan  2Livermore Software Technology Corporation 7374 Las Positas Road, Livermore, Ca 94551, USA	3001
3049	TOWARDS A DESIGN GUIDELINE FOR CORNERS IN COMPOSITE PARTS	Pascal Hubert (McGill University), Jan Schubert (University of Auckland), Simon Bickerton (University of Auckland), Chris Hickey (Southern Spars)	3049
3364	Temperature dependent rheological properties of Ultra-thin Chopped Carbon Fiber Tape Reinforced Thermoplastics	Cheng Bi, Hanchul Lee, Isamu Ohsawa, Jun Takahashi (The University of Tokyo)	3364
3366	A TWO-PHASE ORTHOTROPIC MODEL FOR INTEGRATING RESIN FLOW AND STRESS DEVELOPMENT IN PROCESSING OF COMPOSITE MATERIALS	Sina Amini Niaki (The University of British Columbia), Alireza Forghani (Convergent Manufacturing Technologies Inc.), Reza Vaziri (The University of British Columbia), Anoush Poursartip (The University of British Columbia)	3366
3396	WINDING PROCESS MODELLING – VALIDATION THROUGH SPRING-IN PREDICTION	Patrick Pérès, Jean Marc Dupillier, Lynam Corey (Airbus Safran Launchers)	3396
3474	Numerical simulation of the drilling of carbon fiber reinforced plastics on the macroscopic and microscopic scales	Fuji Wang, Xiaonan Wang, Zhenyuan Jia, Rao Fu, Yu Bai, Youliang Su (Dalian University of Technology)	3474
3589	NUMERICAL MODELLING OF THE BONDING PROCESS FOR WIND TURBINE BLADES: MODEL VALIDATION	A. Uzal (Technical University of Denmark), J. Spangenberg (Technical University of Denmark), M. W. Nielsen (LM Windpower), M. R. Sonne (Technical University of Denmark), J. H. Hattel (Technical University of Denmark)	3589
3592	THE EFFECT OF SATURATION ON RESIN FLOW IN INJECTION PULTRUSION: A PRELIMINARY NUMERICAL STUDY	J. Spangenberg (Technical University of Denmark), M. Larsen (Fiberline A/S), R. R. Rodríguez (Technical University of Denmark), P. M. M. Sánchez (Technical University of Denmark), F. Rasmussen (Technical University of Denmark), M. R. Sonne (Technical University of Denmark), J. H. Hattel (Technical University of Denmark)	3592
3608	Thermal modelling of extrusion based additive manufacturing of composite materials	M. L. Jensen, M. R. Sonne, J. Spangenberg, J. H. Hattel, H. N. Hansen (Technical University of Denmark)	3608
3720	A MODEL FOR PREDICTING FREE SURFACE FLOW OF THE RTM PROCESS	Da Wu, Ragnar Larsson (Chalmers University of Technology)	3720
3722	Optimal process design for large-scale pultrusion structures	Alexander Safonov (Skolkovo Institute of Science and Technology), Daria BondarchUnited Kingdom (Skolkovo Institute of Science and Technology), Anton Saratov (DATADVANCE), Andrey Ushakov (Skolkovo Institute of Science and Technology), Iskander Akhatov (Skolkovo Institute of Science and Technology)	3722
3780	EFFECT OF FLAKE DISTRIBUTION IN MOLD ON THE FLOW DURING COMPRESSION MOLDING OF UNIDIRECTIONAL LONG FIBER THERMOPLASTIC FLAKES	A Bhakta1, 2, W Ali1, 2, H.J.M. Geijselaers1, U Sachs2, M I A Rasheed1, A.H.van den Boogaard1  1 University of Twente,7500 AE, Enschede, The Netherlands, mail: a.bhakta@utwente.nl 2 ThermoPlastic Composites Research Centre (TPRC), 7521 PN, Enschede, The Netherlands	3780
3829	Consolidation model for optimization of thermoplastic composite lamination processes	Huajie Shi, Jeffrey Lugo, Bert Rietman, Nikhil Verghese (SABIC)	3829
3858	EXPERIMENTAL AND NUMERICAL ANALYSIS OF LASER REFLECTION FOR OPTICAL-THERMAL PROCESS MODELING OF TAPE WINDING	Amin Zaami, Ismet Baran, Remko Akkerman (University of Twente)	3858
3893	Quantification of Micro-Pullwinding Process as Basis of Data Mining Algorithms for Predictive Process Model	Christian Wasiak, Henning Janssen and Christian Brecher (Fraunhofer Institute for Production Technology IPT)	3893
3894	Final Paper-TTT DIAGRAM OF THE ANIONIC POLYMERIZATION PA6 FROM E-CAPROLACTAM	Céline Vicard (Institut Clément Ader, Ecole des Mines d’Albi-Carmaux), Olivier De Almeida (Institut Clément Ader, Ecole des Mines d’Albi-Carmaux), Arthur Cantarel (Institut Clément Ader, IUT Tarbes), Gérard Bernhart (Institut Clément Ader, Ecole des Mines d’Albi-Carmaux, IRT Saint-Exupéry)	3894
3903	THERMAL MODELING STRATEGIES FOR LASER ASSISTED TAPE WINDING (LATW) PROCESS	S.M.A. Hosseini, I. Baran, R. Akkerman (University of Twente)	3903
3915	Thermal optimization of pultruded composites	R. C. Santos (The Federal University of Rio de Janeiro), L. S. Santos (The Fluminense Federal University) e V. M. A. Calado (The Federal University of Rio de Janeiro)	3915
3989	WARPAGE PREDICTION IN OVER-INFUSION PROCESS OF GLASS/POLYESTER COMPOSITE LAMINATES	Ismet Baran (University of Twente)	3989
3996	OPTIMIZATION OF CURING TEMPERATURE PATTERNS FOR FRP PLATE WITH UNEVEN DEGREE-OF-CURE DISTRIBUTION	Tatsuro Kosaka, Go Ueyama, Kazuhiro Kusukawa (Kochi University of Technology)	3996
4232	Three-dimensional flow simulation of resin transfer molding for composite wheel rim	Zheng Min Huang (Seoul National University), So Yun Lee (Seoul National University), Young Seok Song (Dankook University), Jae Ryoun Youn (Seoul National University)	4232
4246	Modeling and Material Data Issues of Injection Molding Simulation	Zhiliang Fan, Russell Speight (Autodesk Australia Pty Ltd)	4246
4392	Optimisation of double diaphragm forming process through local adjustment of in-plane constraint	S. Chen, L. T. Harper, O.P.L. McGregor, A. Endruweit, N. A. Warrior (University of Nottingham)	4392
2978	EXPERIMENTAL INVESTIGATION OF COMPOSITE MATERIALS DRILLING USING A STEP GUNDRILL	P. Rahme (Lebanese University), Y. Landon (University of Toulouse), F. Lachaud (University of Toulouse), R. Piquet (University of Toulouse), P. Lagarrigue (University of Toulouse)	2978
Theme 6 Processing and Manufacturing
6.2 Track Processing-Manufacturing Technologies
Paper ID	Full Paper Title	Author	Paper ID
3065	VIBRATION AIDED VACUUM INFUSION OF BNNS MODIFIED CARBON FABRIC/EPOXY COMPOSITES	A.Tuğrul Seyhan (Anadolu University (AU)) , Reinhold Meier (EDAG Engineering GmbH, Technische Universität München (TUM)), Swen Zaremba(TUM), Klaus Drechesler (TUM)	3065
2891	MODELLING OF GEOMETRICAL INSTABILITIES IN ASYMMETRIC COMPOSITES PLATES REINFORCED WITH 3D INTERLOCK FABRICS	Benavente, M. (École Polytechnique), Marcin, L. (SAFRAN), Godon, T. (SAFRAN), Levesque, M. (École Polytechnique), Ruiz, E. (École Polytechnique)	2891
2914	DEVELOPMENT OF ELECTROPHORETIC DEPOSITION FOR SIC/SIC COMPOSITES	Hou Huining, Li Mingyuan, Zhou Xingui (National University of Defense and Technology)	2914
2978	EXPERIMENTAL INVESTIGATION OF COMPOSITE MATERIALS DRILLING USING A STEP GUNDRILL	P. Rahme1,*, Y. Landon2, F. Lachaud2, R. Piquet2 and P. Lagarrigue2 1 Lebanese University, Faculty of Engineering, Mechanical Engineering Department; P.O. Box : 27622319, Roumieh, Lebanon 2 Université de Toulouse ; INSA, UPS, Mines Albi, ISAE ; ICA (Institut Clément Ader) ; Bât 3R1, 118 Route de Narbonne, F-31062 Toulouse cedex 9 * Corresponding author, email: prahme@ul.edu.lb	2978
3159	Towards high-quality multi-spot-welded joints in thermoplastic composites structures	Tian Zhao, Genevieve Palardy, Irene Fernandez Villegas, Rinze Benedictus (Delft University of Technology)	3159
3196	GRAPHENE COATED SMART FABRICS FOR VARTM PROCESS MONITORING	Muhammad A Ali (Khalifa University of Science, Technology and Research (KUSTAR)), Rehan Umer (KUSTAR), Kamran A Khan (KUSTAR), Yarjan A Samad (The University of Cambridge)	3196
3259	Study on production technology and performance of CFRP pultrudedplate for power blades	Haichao Huang (Weihai Guangwei Composities Co.,Ltd)	3259
3308	CO-SPRAY FORMING AND TAILORED HEAT TREATMENT OF COMPOSITE TOOL STEELS	Chengsong Cui1, Alwin Schulz2, Dawid Nadolski3  1 Foundation Institute for Materials Science, Badgasteiner Str. 3, 28359 Bremen, Germany E-mail: cscui@iwt.uni-bremen.de, Website: www.iwt-bremen.de	3308
3311	EFFECT OF LAMINATE B-STAGING ON OUT-OF-AUTOCLAVE COMPOSITE REPAIR	H. M. Chong, A. S. Subramanian, S. P. Ng, E. Kok and S. Feih  Joining Technology Group, Singapore Institute of Manufacturing Technology, 2 Fusionopolis Way, Singapore 138634 chonghm@simtech.a-star.edu.sg	3311
3332	SYSTEM IMPROVEMENT FOR LASER-BASED TAPE PLACEMENT TO DIRECTLY MANUFACTURE METAL / THERMOPLASTIC PARTS	Tido Peters, Christian KUnited Kingdomla, Henning Janssen, Christian Brecher (Fraunhofer Institute for Production Technology IPT)	3332
3334	HOW COBOTS BUILD TAILORED BLANKS: MATERIALS AND PROCESS QUALIFICATION FOR ADVANCED THERMOPLASTIC COMPOSITES	Frederic J.C. Fischer, Manfred Schönheits, Thomas Stefani, Manuel Engelschall, Arthur-Hans Thellmann, Philipp Gänswürger, Michael Kupke (German Aerospace Center (DLR))	3334
3440	A PROMISING PREPARATION METHOD FOR AL/7075-B4C/AL LAYERED COMPOSITE BY CONTINUOUS CASTING AND HOT ROLLING	Yubo Zhang*,Yingshui Yu, Tingju Li Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China * Corresponding author E-mail: ybzhang@dlut.edu.cn	3440
3470	Laser Machining of CFRP	Rajesh Patel (Spectra-Physics)	3470
3489	Curing resin infused composites in the autoclave	Robert Wilkinson, Richard K. Cullen, John Summerscales (Plymouth University)	3489
3525	TAILORED FIBER PLACEMENT BASED ON EPOXY PREIMPREGNATED CARBON ROVINGS (TOWPREG)	Kai Uhlig 1, Axel Spickenheuer1, Lars Bittrich1, Gert Heinrich1    1Leibniz-Institut für Polymerforschung Dresden e. V.  Hohe Str. 6, 01067 Dresden, Germany 1E-mail: uhlig@ipfdd.de, web page: http://www.ipfdd.de	3525
3550	A method for dispersing particle fillers in thermoplastic composites using commingled yarns	Joanna C. H. Wong, Nadine Hertaeg, Paolo Ermanni (ETH Zurich)	3550
3608	Thermal modelling of extrusion based additive manufacturing of composite materials	Mathias L. Jensen1,2, Mads R. Sonne2, Jesper H. Hattel2, Hans N. Hansen2  1 Innovation and Concepts, Vestas Wind Systems, 8200 Aarhus N, Denmark, malaj@vestas.com, www.vestas.com 2 Department of Mechanical Engineering, Technical University of Denmark, 2800 Lyngby, Denmark, http://www.dtu.dk	3608
3648	The Permeability Characteristics of Dry Fiber Preforms Manufactured using Automated Dry Fiber Placement	Alia R Aziz (Khalifa University of Science, Technology and Research (KUSTAR)), Rehan Umer (KUSTAR), Xuesen Zeng (The University of Nottingham), Sanjeev Rao (KUSTAR), Wesley J Cantwell (KUSTAR)	3648
3681	Electrical-Heating Molding Process Based on Carbon Fiber Felt for Fabricating Glass Fiber Reinforced Thermoplastic Composite	Jiyong Liang, Cong Liu, Yizhuo Gu, Min Li, Shaokai Wang, Yanxia Li, Zuoguang Zhang (Beihang University)	3681
3684	Investigation of Processing Parameters in Continuous Lattice Fabrication	Martin Eichenhofer, Joanna. C. H. Wong, Paolo Ermanni (ETH Zurich）	3684
3685	Extrusion of endless fiber reinforced thermoplastic elastomer composites with crimped p-aramid fiber	Johannes Gattinger, Benedikt Kirchebner, Michael Kirsch (Technical University of Munich)	3685
3724	Study on Resin Layer Polishing of Carbon Fiber Mirror Based on Ion Beam Figuring	Ding Jiao Teng (Xi’an Institute of Optics and Precision Mechanics of CAS), Xu Liang (Xi’an Institute of Optics and Precision Mechanics of CAS), Ma Zhen (Xi’an Institute of Optics and Precision Mechanics of CAS), Fan Xue Wu (Xi’an Institute of Optics and Precision Mechanics of CAS), Xie Yong Jie (Xi’an Institute of Optics and Precision Mechanics of CAS), Wang Yong Jie (Xi’an Institute of Optics and Precision Mechanics of CAS), Luo Yao (Xi’an Branch of China Academy of Space Technology)	3724
3988	Laminates with under-over lacing made by Automated Fiber Placement	Minh Duc Hoang, Jeffrey Fortin-Simpson, Suong Van Hoa (Concordia University, Center for Research in Polymers and Composites (CREPEC))	3988
3996	OPTIMIZATION OF CURING TEMPERATURE PATTERNS FOR FRP PLATE WITH UNEVEN DEGREE-OF-CURE DISTRIBUTION	Tatsuro Kosaka1, Go Ueyama2 and Kazuhiro Kusukawa3  1 Kochi University of Technology, Miyanokuchi 185, Tosayamada, Kami, Kochi 782-8502, Japan kosaka.tatsuro@kochi-tech.ac.jp 2 Hitachi Zosen Co. Ltd., 7-89, Nankokita 1-chome, Suminoe-ku, Osaka 559-8559, Japan 3 Kochi University of Technology, Miyanokuchi 185, Tosayamada, Kami, Kochi, 782-8502, Japan kusukawa.kazuhiro@kochi-tech.ac.jp	3996
4022	MANUFACTURING OF HIGH COMPLEXITY AIRCRAFT STRUCTURE IN PREIMPREGNATED CARBON FIBER BY MEANS OF DOUBLE VACUUM DEBULKING PROCESS	L.Garcia-Fernandez, A.Garcia-Garcia (FIDAMC)	4022
4057	QUASI-ISOTROPIC ALIGNED DISCONTINUOUS FIBRE COMPOSITES WITH THE HIPERDIF (HIGH PERFORMANCE DISCONTINUOUS FIBRES) METHOD	H. Yu, M.L. Longana, K.D. Potter (University of Bristol)	4057
4137	EFFECT OF THE PRE-CONSOLIDATION PROCESS ON QUALITY AND MECHANICAL PROPERTIES OF MONO AND MULTI-MATERIAL LAMINATES BASED ON THERMOPLASTIC UD TAPES	Michael Kropka (Neue Materialien Bayreuth GmbH), Johann Reichstein (Neue Materialien Bayreuth GmbH), Thomas Neumeyer (Neue Materialien Bayreuth GmbH), Volker Altstaedt (Neue Materialien Bayreuth GmbH, University of Bayreuth)	4137
4140	Thermoplastic Sandwich Structures - Processing Approaches Towards Automotive Serial Production	T. Neumeyer (Neue Materialien Bayreuth GmbH), J. F. Knoechel (Neue Materialien Bayreuth GmbH), M. Muehlbacher (Neue Materialien Bayreuth GmbH), T. Kroeger (Neue Materialien Bayreuth GmbH), P. Schreier (Neue Materialien Bayreuth GmbH), V. Altstaedt (Neue Materialien Bayreuth GmbH, University of Bayreuth)	4140
4157	Development of bending process for FRTP pipe	Tatsuya Banno, Yagi Masaoki, Kyuso Morino, Asami Nakai (Gifu University)	4157
4264	Effect of molding condition on mechanical properties in injection and compression hybrid molding	Masahiro Funahashi, Kenya Morie, Asami Nakai, Masaki Ohishi (GIFU University)	4264
4284	IN-SITU STRAIN MONITORING IN PREPREG PLACEMENT PROCESS USING DISTRIBUTED OPTICAL FIBER SENSOR	Kosuke Tanogami, Shoma Niwa, Shu Minakuchi, Nobuo Takeda  The University of Tokyo, Japan	4284
4305	INTRODUCTION OF AN IN-MOULD INFRARED HEATING DEVICE FOR PROCESSING THERMOPLASTIC FIBRE-REINFORCED PREFORMS AND MANUFACTURING HYBRID COMPONENTS	J. Beuscher, R. Schnurr, A. Müller, M. Kühn and K. Dröder (Braunschweig University of Technology)	4305
4306	Study of Painting Pretreatment of Carbon Fiber Composites for Automotive Applications-ICCM	Huang Ziyu, Yang zhensan, He peng	4306
4398	MOLDING CONDITION FOR SHORTENING MOLDING TIME DURING PULTRUSION MOLDING OF THERMOPLASTIC COMPOSITES	Asami Nakai, Kyuso Morino (Gifu University)	4398
Theme 6 Processing and Manufacturing
6.3 Track Processing-Preforming Technologies
Paper ID	Full Paper Title	Author	Paper ID
4505	PREDICTION OF PERMEABILITY IN RTM PROCESS FOR COMPOSITES BASED ON MULTI-SCALE APPROACH	Yong-joo Cho, Chao Zhao, S.Z.H Shah, Sung-kyu Ha (Hanyang Graduate School)	4505
3663	Investigating Flow Mechanics Within a Novel Non-destructive Injectability Measurement for Fibre Preforms	Hermann, T. (University of Auckland); Miene S. (University of Auckland); Henke T. (BMW Group); Kelly P. A. (University of Auckland); Bickerton S (University of Auckland)	3663
3095	MANUFACTURING PROCESS FOR W STRINGERS WITH HIGH CURVATURE IN PREIMPREGNATED CARBON FIBER	M. Mora-Mendías1, F. Chamorro-Alonso1, A. García-García1 and P. Nogueroles-Viñes1 1 FIDAMC, Foundation for the Research, Development and Application of Composite Materials, Avda. Rita Levi-Montalcini 29, 28906 Getafe, Madrid, Spain maria.mora.mendias@fidamc.es	3095
3846	Manufacture of Hybrid Bicomponent Fibers by Kiss-Roll Coating	Christoph Schneeberger, Nicole Aegerter, Joanna C. H. Wong, Paolo Ermanni (ETH Zurich)	3846
4186	Defect Reduction in the Double Diaphragm Forming Process	O.P.L. McGregor, S. Chen, L. T. Harper, A. Endruweit, N. A. Warrior (University of Nottingham)	4186
4284	IN-SITU STRAIN MONITORING IN PREPREG PLACEMENT PROCESS USING DISTRIBUTED OPTICAL FIBER SENSOR	KosUnited Kingdome Tanogami, Shouma Niwa, Shu Minakuchi, Nobuo Takeda (The University of Tokyo)	4284
4304	PROCESS DESIGN CONCEPT FOR AUTOMATED PRE-ASSEMBLING OF MULTI-MATERIAL PREFORMS	S R. Schnurr, J. Beuscher, K. Lippky, F. Dietrich, A. Müller, K. Dröder, K. Dilger	4304
4516	Winding movement trajectory optimization of composite elbows based on four-dof winding machine	Xu Jia Zhong (Harbin University of Science and Technology)	4516
4529	EFFECT OF INTERLAMINAR TOUGHENING LAYERS ON THE DIAPHRAGM FORMING QUALITY OF CARBON/EPOXY PREPREG	W.T. Wang, H. Yu, K.D. Potter, B.C. Kim  Advanced Composites Centre for Innovation and Science (ACCIS), University of Bristol Queen’s Building, University Walk, Bristol, UK, BS8 1TR Email: logan.wang@bristol.ac.uk, Web Page: http://www.bristol.ac.uk/composites/	4529
Theme 6 Processing and Manufacturing
6.4 Track Process Induced Effects
Paper ID	Full Paper Title	Author	Paper ID
3020	Effect Of Degree of Cure and Time on Viscoelastic Poissons Ratio	Sibin Saseendran (Swerea SICOMP), Maciej Wysocki (Swerea SICOMP), Janis Varna (Luleå University of Technology)	3020
2877	EFFECTS OF FAST PREPREG PRESSING ON LAMINATE QUALITY AND MECHANICAL PROPERTIES	Oliver Rimmel (University of Kaiserslautern), David Becker (University of Kaiserslautern), Christian Gemperlein (all ahead composites GmbH), Peter Mitschang (University of Kaiserslautern)	2877
3032	PROBABILISTIC CHARACTERIZATION OF POROSITY DEFECT IN A LAMINATED COMPOSITE	Edouard Gauthier1, Laurent Guillaumat2   1 IRT Jules Verne, Chemin du Chaffault 44340 Bouguenais France http://www.irt-jules-verne.fr E-mail : edouard.gauthier@irt-jules-verne.fr 2 LAMPA ENSAM, 2 Boulevard du Ronceray 49100 Angers France http://lampa.ensam.eu E-mail : laurent.guillaumat@ensam.eu	3032
3049	TOWARDS A DESIGN GUIDELINE FOR CORNERS IN COMPOSITE PARTS	Pascal Hubert1, Jan Schubert2, Simon Bickerton2, Chris Hickey3  1 Department of Mechanical Engineering, McGill University 817 Sherbrooke Street West, Montreal, QC, H3A 0C3, Canada pascal.hubert@mcgill.ca, www.composites.mcgill.ca 2 Centre for Advanced Composite Materials, The University of Auckland Private Bag 92019, Auckland Mail Centre, Auckland, 1142, New Zealand s.bickerton@auckland.ac.nz, www.cacm.auckland.ac.nz 3 Southern Spars and Rigging 15 Jomac Place, Avondale, 1026, Auckland, New Zealand chris.hickey@southernspars.com, www.southernspars.com	3049
3207	Understanding the effect of void morphology and characteristics on laminate mechanical properties	Iryna Gagauz, Luiz F. Kawashita, Stephen R. Hallett (University of Bristol)	3207
3224	IN-SITU MONITORING OF AIR REMOVAL DURING VACUUM BAGONLY (VBO) PROCESSING	Wei Hu, Steven Nutt M.C. Gill Composites Center, University of Southern California 3651 Watt Way, VHE-604  Los Angeles, CA, 90089	3224
3228	A RFI PROCESSING OF MULTI-SCALE REINFORCEMENT FOR SURFACE PROTECTION OF CFRP	Ben Wanga, Yugang Duana*, Dilmurat Abliza,b, Gerhard Ziegmannb 1 State Key Lab for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an , Shaanxi Province, 710049, , PR China 2 Institute of Polymer Materials and Plastics Engineering, Clausthal University of Technology, Clausthal-Zellerfeld, 38678, Germany	3228
3415	GFRP MECHANICAL BEHAVIOUR INDUCED BY A MESOSCOPIC SHAPING DEFECT	C. Cruanes (Tours university), A. Shanwan (Orléans university), S. Allaoui (Orléans university), S. Méo (Tours university), M.-P. Deffarges (Tours university), F. Lacroix (Tours university), G. Hivet (Orléans university)	3415
3443	Utilizing Stress-Based Failure Criteria for Prediction of Curing Induced Damage in 3D Woven Composites	Igor TsUnited Kingdomrov (University of New Hampshire), Borys Drach (New Mexico State University), Anton Trofimov (New Mexico State University), Andrew Drach (University of Texas at Austin), Todd Gross (University of New Hampshire)	3443
3560	Characterising the influence of fibre angle on the bending of uncured carbon fibre prepreg	S. Erland, T. J. Dodwell (University of Exeter)	3560
3683	Influence of strand dispersion method on mechanical properties of randomly oriented carbon fiber strand thermoplastic composites	Yuto Nakashima, Hirofumi Suganuma, Shinichiro Yamashita, Jun Takahashi (The University of Tokyo)	3683
3710	VOIDS IN FIBER REINFORCED THERMOSETTING POLYMERS: FORMATION, STRUCTURE AND MECHANICAL BEHAVIOUR	Ivan V. Sergeichev (Skolkovo Innovation Center), Sergey G. Abaimov (Skolkovo Innovation Center), Svyatoslav S. Chugunov (Skolkovo Innovation Center), Eduard S. Batyrshin (Bashkir State University), Almir I. Mullayanov (Bashkir State University), Iskander Sh. Akhatov (Skolkovo Innovation Center)	3710
3712	Cure Process Monitoring of Curved Composite with Interlaminar Toughened Layers	Keiichiro Sawaguchi (The University of Tokyo)	3712
3762	THE INFLUENCE OF RESIN STARVED AREA MANUFACTURING IMPERFECTIONS ON THE MECHANICAL PERFORMANCE OF NON-CRIMP FABRIC CFRP LAMINATE	SUnited States of Americanne Hörrmann, Adi Adumitroaie, Christoph Kralovec, Martin Schagerl (Johannes Kepler University Linz)	3762
4030	PLY INTERFACE ANGLES TO PROMOTE AUTOMATED FORMING OF AEROSPACE STRUCTURES	K. Johnson, R. Butler, E. G. LoUnited Kingdomaides (University of Bath)	4030
4048	Influence of strand dimension and dispersion method on rigidity and its scatter of hat shaped specimens made of randomly-oriented CFRTP strands	Hideki Toyoda, Hirofumi Suganuma, Shinichiro Yamashita, Takahiro Hayashi, Michinobu Fujita, Jun Takahashi (The University of Tokyo)	4048
4066	Simulation and Analysis of Process Induced Deformation for Composite Structures	Liu Kai (Beihang University), Ye Jinrui (Beihang University), Zhang Boming (Beihang University), Tang Zhanwen (Beihang University), Jiang Tian (Beihang University), Liu Weiping (Shanghai Aircraft Manufacturing CO)	4066
4165	Modelling wrinkling onset in textile forming using membrane elements	M. Y. Matveev, A. Endruweit, N. A. Warrior, D. S. A. De Focatiis, A. C. Long (University of Nottingham)	4165
4173	Influence of Bending on Wrinkle Formation and Potential Methods of Mitigation	Sree Shankhachur Roy, Danjie Yang, Prasad Potluri (The University of Manchester)	4173
4294	Influence of tool-part frictional interaction on the cure-induced deformations in thermoset-based composite parts	Antoine Parmentier, David Dumas (Cenaero ASBL)	4294
Theme 6 Processing and Manufacturing
6.5 Track Experimental Methods for Process Characterization
Paper ID	Full Paper Title	Author	Paper ID
3230	INVESTIGATION OF SHEAR-BENDING COUPLED PROPERTIES IN COMPOSITE PREPREG FORMING	Hassan Alshahrani, Mehdi Hojjati (Concordia University)	3230
3032	Probabilistic characterization of porosity defect in a laminated composite	Edouard Gauthier (IRT Jules Verne), Laurent Guillaumat (LAMPA ENSAM)	3032
3218	An alternative method for advancing glass transition temperature in epoxy based composites for softening sensitive measurements	Stewart, A. L., Poursartip, A. (The University of British Columbia)	3218
3270	IN SITU BUBBLE CHARACTERIZATION DURING RESIN INFUSION FOR PROCESS SIMULATION OF VOIDS	Brock Zobell, Andrew George (Brigham Young University)	3270
3292	THE EXPERIMENTAL STUDY ON THERMAL CONDUCTIVITY OF COMPOSITE PROTON EXCHANGE MEMBRANE	Lei Chen, Yinan Nie, Shanyou Wang, Wenquan Tao* Key laboratory of Thermal-Fluid Science and Engineering, Ministry of Education Xi’an Jiaotong University, China	3292
3334	HOW COBOTS BUILD TAILORED BLANKS: MATERIALS AND PROCESS QUALIFICATION FOR ADVANCED THERMOPLASTIC COMPOSITES	Frederic J.C. Fischer1, Manfred Schönheits1, Thomas Stefani1, Manuel Engelschall1, Arthur-Hans Thellmann2, Philipp Gänswürger1, Michael Kupke1  1 Institute of Structures and Design (BT), Center for Lightweight Production Technology (ZLP), German Aerospace Center (DLR), Am Technologiezentrum 4, 86159 Augsburg, Germany	3334
3469	EVALUATION OF FIBER PREFORM PERMEABILITY TENSOR CONSIDERING FLOW INLET FINITE SIZE	Viktor Grishaev, Sergey G. Abaimov, Oleg V. Lebedev, Iskander S. Akhatov (Skolkovo Institute of Science and Technology)	3469
3480	TACK TESTING TO AID OPTIMISATION OF PROCESS PARAMETERS FOR AUTOMATED MATERIAL PLACEMENT IN AN INDUSTRIAL ENVIRONMENT	A. Endruweit, S. Ghose, B.A. Johnson, S. Kelly, D.S.A. De Focatiis, N.A. Warrior (University of Nottingham)	3480
3481	Tracking the Evolution of a Defect, Characteristic of AFP Layup, During Cure with In-Process Micro-CT Scanning	Laura Rhian Pickard, Katie Smith, James Kratz, Kevin Potter (University of Bristol)	3481
3539	FRAMEWORK FOR PROCESS-RELATED RESIN SELECTION AND OPTIMISATION FOR THE RESIN TRANSFER MOULDING (RTM) OF COMPOSITE MATERIALS	M. Rutt1,3, C. Lekakou1, P.A.Smith1, I.Hamerton2, G.Meeks3, A.Sordon3 and C.Santoni3  1 Department of Mechanical Engineering Sciences, University of Surrey, Guildford, Surrey GU2 7XH Email: m.rutt@surrey.ac.uk; c.lekakou@surrey.ac.uk; p.smith@surrey.ac.uk Website: www.surrey.ac.uk 2 Department of Aerospace Engineering, University of Bristol, Bristol BS8 1TR, UK  Email: ian.hamerton@bristol.ac.uk Website: www.bris.ac.uk 3 McLaren Technology Centre, Chertsey Road Woking Surrey GU21 4YH, UK Email: graham.meeks@mclaren.com; alessandro.sordon@mclaren.com; claudio.santoni@mclaren.com Website: cars.mclaren.com	3539
3588	Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding	C. Schillfahrt, E. Fauster, R. Schledjewski (Montanuniversität Leoben)	3588
3663	INVESTIGATING FLOW MECHANICS WITHIN A NOVEL NONDESTRUCTIVE INJECTABILITY MEASUREMENT FOR FIBRE PREFORMS	Hermann T.1;Miene S.1; Henke T.2; Schelte A. 2; Kelly P. A.1; Bickerton S.1  1 Centre for Advanced Composite Materials, University of Auckland, Private bag 92019 1142 Auckland, New Zealand, t.hermann@auckland.ac.nz, www.cacm.auckland.ac.nz 2 BMW Group, Ohmstraße 2 84030 Landshut, thomas.henke@bmw.de, Germany, www.bmwgroup.com	3663
3677	RESIN PRESSURE AND RESIN FLOW INSIDE A COMPOSITE JOINT DURING THERMAL EXPANSION PROCESS	Weibo Zhang, Min Li, Yizhuo Gu, Shaokai Wang, Zuoguang Zhang (Beihang University)	3677
3780	EFFECT OF FLAKE DISTRIBUTION IN MOLD ON THE FLOW DURING COMPRESSION MOLDING OF UNIDIRECTIONAL LONG FIBER THERMOPLASTIC FLAKES	A. Bhakta (University of Twente), H.J.M. Geijselaers (University of Twente), U. Sachs (ThermoPlastic composites Research Centre), M. I. A. Rasheed (University of Twente), A.H. van den Boogaard (University of Twente)	3780
3821	The Detection Method of Particle Distribution in Ternary Composites Consisting of Particles, Resin Matrix and 3-D Woven Reinforcement	Y. Zhou, M. Li, Y. Li, Y. Gu, Z. Zhang (Beihang University)	3821
3956	A COMPARISON OF MATERIAL STATE MONITORING TECHNIQUES APPLIED TO RESIN TRANSFER MOULDING	Daniel Griffin1, Alper Aktas1, Maria Lodeiro1, Tim Young2, Ian Hamerton3, Ivana Partridge3 1 National Physical Laboratory, Hampton Road, Teddington, TW11 0LW, UK 2 National Composites Centre, Bristol & Bath Science Park, Emersons Green, Bristol, BS16 7FS, UK 3 University of Bristol, Queen's Building, University Walk, Clifton, BS8 1TR, UK	3956
4012	Development of an experimental bench for analyzing heat transfer during the tape placement of carbon/ PEEK composites	Violaine Le Louët (IRT Jules Verne, CNRS Laboratoire de Thermocinétiques de Nantes), Steven Le Corre (CNRS Laboratoire de Thermocinétiques de Nantes), Nicolas Boyard (CNRS Laboratoire de Thermocinétiques de Nantes), Didier Delaunay (CNRS Laboratoire de Thermocinétiques de Nantes), Xavier Tardif (IRT Jules Verne)	4012
4107	BIAS EXTENSION MEASUREMENTS ON CROSS PLIED UNIDIRECTIONAL THERMOSET PREPREG	Y.Q. Zhao1*, T. Zhang2, B.M. Zhang3 School of Materials Science and Engineering, Beihang University, Beijing, China * Corresponding author (yqz14@buaa.edu.cn)	4107
4302	MEASUREMENT OF RESIDUAL STRESS IN THICK THERMOSET COMPOSITE LAMINATE PLATES USING DEEP HOLE DRILLING METHOD	Mamani, Sara1, Hoa, Suong V2  1 Department of Mechanical and Industrial Engineering, Concordia Center for Composites, Montreal, Canada, s.mamani.ce@gmail.com  2 Center for Research In Polymers and Composites (CREPEC), Montreal, Canada, hoasuon@alcor.concordia.ca	4302
4312	A Comparison of Material State Monitoring Techniques Applied to Resin Transfer Moulding	Daniel Griffin (National Physical Laboratory, United Kingdom), Alper Aktas (National Physical Laboratory, United Kingdom), Maria Lodeiro (National Physical Laboratory, United Kingdom), Tim Young (National Composites Centre, United Kingdom), Ian Hamerton (University of Bristol), Ivana Partridge (University of Bristol)	4312
4606	ONLINE CURE MONITORING OF A RTM PROCESS: CORRELATION OF DIELECTRIC ANALYSIS WITH THE THERMAL PROPERTIES OF EPOXY RESINS	Martin Demleitner (University of Bayreuth), Gökhan Bakis (University of Bayreuth), Aline Sanchez (University of Bayreuth), Tobias Pflock (NETZSCH Gerätebau GmbH), Alexander Chaloupka (NETZSCH Gerätebau GmbH), Volker Altstädt (University of Bayreuth)	4606
4669	THE INFLUENCE OF CONSOLIDATION FORCE ON THE PERFORMANCE OF AFP MANUFACTURED LAMINATES	Ebrahim Oromiehie1, B. Gangadhara Prusty1, Paul Compston2, Ginu Rajan3  1School of Mechanical and Manufacturing Engineering, UNSW Australia, NSW 2052, Australia, g.prusty@unsw.edu.au 2Research School of Engineering, The Australian National University, Canberra, ACT 2601 Australia, Paul.Compston@anu.edu.au 3School of Electrical, Computer Telecommunication, Engineering University of Wollongong, Australia NSW 2522, ginu@uow.edu.au	4669
Theme 6 Processing and Manufacturing
6.6 Track Liquid Composites Moulding
Paper ID	Full Paper Title	Author	Paper ID
3388	A PERMEABILITY COMPUTATIONAL MODEL BASED ON MESO-SCALE GEOMETRY: CONSIDERING COMPACTION DEFORMATION OF PREFORM	Jianjun Jiang, Xing Chen, Guoli Deng (Northwestern Polytechnical University)	3388
3039	Effect of fiber orientation and bending structure on the permeability of non-crimp fabric in LCM	Yi Geng, Jinhua Jiang, Nanliang Chen, Wenquan Yang, Chuanli Su (Donghua University)	3039
3270	IN SITU BUBBLE CHARACTERIZATION DURING RESIN INFUSION FOR PROCESS SIMULATION OF VOIDS	Brock Zobell1 and Andrew George1  1 School of Technology, Brigham Young University; 265 CTB, BYU, Provo, Utah 84602, USA, andy_george@byu.edu	3270
3447	PERMEABILITY PREDICTION USING POROUS YARNS IN A DUAL-SCALE SIMULATION WITH OPENFOAM	J. Dittmann, S. Hügle, M. Klenk, A. Burkhardt, P. Middendorf (University of Stuttgart)	3447
3478	Permeability Measurement of 3D Woven Preform and Its Application in Liquid Composite Molding Simulation	Xuan Zhang, Guojuan Bai, Xingxing Wang, Tianlin Huang (AECC Commercial Aircraft Engine Co.,Ltd)	3478
3504	An environment-friendly approach for the large-scale preparation of aligned mat using recycled carbon fiber	Guoxin Luo, Yapeng Rong, Xianhua Huan, Xiaolong Jia, Xiaoping Yang (Beijing University of Chemical Technology)	3504
3587	NUMERICAL SIMULATION OF CHARACTERISTIC OF RESIN INFUSION AT MICRO-SCALE	Chen Li, Arthur Cantarel, Xiaojing Gong (University of Toulouse)	3587
3755	EFFECT OF MOLDING PRESSURE ON MECHANICAL PROPERTIES OF FRP BY RTM	Kazumasa Okayasu, Ryo Hirai, Asami Nakai (GIFU University)	3755
4250	Evaluation of a Variety of Vacuum Assisted Resin Infusion Processes	Van Oosterom, S.; Allen T.; Battley M. A.; Bickerton S (University of Auckland)	4250
4505	PREDICTION OF PERMEABILITY IN RTM PROCESS FOR COMPOSITES BASED ON MULTI-SCALE APPROACH	Yong-joo Cho, Chao Zhao, S.Z.H Shah, Sung-kyu Ha* Department of Mechanical Convergence Engineering,  Hanyang Graduate School, 222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea *Corresponding author (sungha@hanyang.ac.kr)	4505
Theme 6 Processing and Manufacturing
6.7 Track Recycling of Composites and Sustainability
Paper ID	Full Paper Title	Author	Paper ID
3186	Influence of recycling process on the tensile property of carbon fiber	Guangbin Cai (The University of Tokyo), Guanghu Yin (The University of Tokyo), Masashi Wada (Japan Fine Ceramics Center), Satoshi Kitaoka (Japan Fine Ceramics Center), Haowen Wei (The University of Tokyo), Isamu Ohsawa (The University of Tokyo), Jun Takahashi (The University of Tokyo)	3186
2908	HIGHLY DRAPABLE ORGANIC SHEETS MADE OF RECYCLED CARBON STAPLE FIBER YARNS	C. Goergen (University of Kaiserslautern), S. Baz (Institut für Textil- und Verfahrenstechnik Denkendorf), P. Mitschang (University of Kaiserslautern), G. T. Gresser (Institut für Textil- und Verfahrenstechnik Denkendorf)	2908
3433	RECYCLING OF COMPOSITE MATERIALS PRODUCTION WASTE	Prof. Dr. Shaidurova1 Process Engineer Gatina2 Assoc. Prof. Kulikova1 1 Perm National research polytechnic university, Russia 2 Research and production association “ISKRA”, Russia	3433
3437	Towards a circular economy for end-of-life carbon fibre composite materials via fluidised bed process	F Meng, J Mckechnie, SJ Pickering (University of Nottingham)	3437
3504	AN ENVIRONMENT-FRIENDLY APPROACH FOR THE LARGESCALE PREPARATION OF ALIGNED MAT USING RECYCLED CARBON FIBER	Yapeng Rong, Guoxin Luo, Xianhua Huan,  Xiaolong Jia, Xiaoping Yang  State Key Laboratory of Organic-Inorganic Composites, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China,               Corresponding to X.L. Jia: jiaxl@mail.buct.edu.cn	3504
3516	Novel carding process to improve mechanical properties of recycled carbon fiber card web reinforced thermoplastics	Guanghu Yin (The University of Tokyo), Guangbin Cai (The University of Tokyo), Haowen Wei (The University of Tokyo), Wataru NagatsUnited Kingdoma (Toray Industries, Inc.), Takuma Kohira (Ehime Institute of Industrial Technology Paper Technology Center), Jun Morisawa (Kochi Prefectural Paper Technology Center), Jun Takahashi (The University of Tokyo)	3516
3797	Fibre length distributions of shredded thermoplastic composite scrap	Guillaume Vincent (ThermoPlastic composites Research Center, University of Twente), Thomas A. de Bruijn (Saxion University of Applied Science), Mohammed Iqbal Abdul Rasheed (University of Twente), Sebastiaan Wijskamp (ThermoPlastic composites Research Center), Remko Akkerman (ThermoPlastic composites Research Center, University of Twente)	3797
4025	INFLUENCE OF RECYCLING CONDITION ON THE SCATTER OF CFRP PROPERTIES	N. Okano (The University of Tokyo), H. Wei (The University of Tokyo), G. Cai (The University of Tokyo), M. Wada (Japan Fine Ceramics Center), S. Kitaoka (Japan Fine Ceramics Center), J. Takahashi (The University of Tokyo)	4025
4054	Optimisation of recycling of carbon fibre composites with a supercritical acetone/water solvent	Matthew J. Keith (University of Birmingham), Andrew Ingram (University of Birmingham), Gary A. Leeke (Cranfield University)	4054
4122	Recycling CPPS laminates into long fibre thermoplastic composites by low shear mixing	T.A. de Bruijn (Saxion University of Applied Sciences, University of Minho), G. Vincent (ThermoPlastic composites Research Center), F.W.J. van Hattum (Saxion University of Applied Sciences)	4122
4235	PRODUCTION WASTE MANAGEMENT OF THERMOPLASTIC COMPOSITES USING COMPRESSION MOULDING	Julien Moothoo (University of Orléans), Christian Garnier (ENI TARBES), Pierre Ouagne (University of Orléans, ENI TARBES)	4235
4297	Degradation Effects of a Closed-Loop Recycling Process for Engineering Thermoplastics	Rhys Tapper, Kevin Potter, Ian Hamerton, Marco Longana, Hana Yu (Univeristy of Bristol)	4297
4365	The High Performance Discontinuous Fibre (HiPerDiF) Method for the Remanufacturing of Mixed Length Reclaimed Carbon Fibres	Marco L. Longana, HaNa Yu, Kevin D. Potter (University of Bristol)	4365
Theme 6 Processing and Manufacturing
6.8 Track Manufacturing Up-Scaling and Automation
Paper ID	Full Paper Title	Author	Paper ID
3367	EFFECT OF MANUFACTURING PARAMETERS ON THE QUALITY OF THERMOPLASTIC COMPOSITES MADE BY AUTOMATED FIBER PLACEMENT (AFP)	S. V. Hoa, F. Shadmehri, J. F. Simpson, M. I. El-Geuchy (Concordia University)	3367
2742	Advanced Automated Tape Laying with Fibre Steering Capability Using Continuous Tow Shearing Mechanism	Evangelos Zympeloudis*, Kevin Potter, Paul M. Weaver and Byung Chul Kim *ACCIS, University of Bristol, Queen’s Building, University Walk, BS8 1TR, Bristol, UK	2742
2787	Optimisation of Multistable Helical Structures using AFP Manufacturing	R. Telford, P.M. Weaver Varicomp, Bernal Institute, University of Limerick, Ireland	2787
2827	RESEARCH ON MT300/603A COMPOSITE MATERIAL AUTOMATED FIBER PLACEMENT PROCESSING TECHNOLOGY	Zhang Jianbao, Wang Junfeng, Ling Hui, Sun Hongjie, Jiang Wenge (Aerospace Research Institute of Materials & Processing Technology)	2827
3654	Fibre Optical Temperature Sensor for Distributed Sensing in Composite Moulds	J. Oelhafen (Technical University of Munich), F. Muschaweckh (fos4X GmbH), S. Zaremba (Technical University of Munich), K. Drechsler (Technical University of Munich)	3654
3766	Automating the manufacture of very complex composite structures	Kevin Potter, Mike Elkington, Dennis Crowley, Carwyn Ward (University of Bristol)	3766
4271	Advanced Automated Tape Laying with Fibre Steering Capability Using Continuous Tow Shearing Mechanism	Evangelos Zympeloudis, Kevin Potter, Paul M. Weaver, Byung Chul Kim (University of Bristol)	4271
4545	OPTIMISATION OF MULTISTABLE HELICAL STRUCTURES USING AFP MANUFACTURING	R. Telford, P.M. Weaver (University of Limerick)	4545
Theme 6 Processing and Manufacturing
6.9 Track Additive Manufacturing
Paper ID	Full Paper Title	Author	Paper ID
3317	Optimizing Mechanical Properties of Additively Manufactured FRPC	Matthias Domm, Jens Schlimbach, Peter Mitschang (University of Kaiserslautern)	3317
2758	A NOVEL METHOD FOR FABRICATING C/C-SIC COMPOSITES VIA 3D PRINTING TECHNOLOGY	Wei Zhu1, 2, Hua Fu2, Zhongfeng Xu2, Yusheng Shi2, Xinyu Shao1, Chunze Yan2*  1 State Key Lab of Digital Manufacturing Equipment & Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, China.	2758
3083	MANUFACTURING AND RECYCLING OF 3D PRINTED CONTINUOUS CARBON FIBER REINFORCED PLA COMPOSITES	Xiaoyong Tian (Xi’an Jiaotong University)	3083
3317	OPTIMIZING MECHANICAL PROPERTIES OF ADDITIVELY MANUFACTURED FRPC	Matthias Domm1, Jens Schlimbach2 and Peter Mitschang3 1 Institut für Verbundwerkstoffe GmbH, Erwin-Schrödinger-Straße, Gebäude 58, 67663 Kaiserslautern (Germany), matthias.domm@ivw.uni-kl.de, http://www.ivw.uni-kl.de	3317
3343	3D PRINTED COMPOSITES – BENCHMARKING THE STATE-OF-THE-ART	Lourens Blok (University of Bristol)	3343
3365	4D PRINTING OF COMPOSITES	Hoa Suong V.1 ,Minh Duc Hoang2, Jeffrey Fortin Simpson3 and Tsz Ho Kwok4 1,2,3,4 Concordia Center for Composites Department of Mechanical and Industrial Engineering Concordia University Center for Research in Polymers and Composites (CREPEC) Montreal, Quebec, Canada H3G1M8 Email: hoasuon@encs.concordia.ca	3365
3571	3D printing of integrated composite honeycomb sandwich structures with continuous carbon fiber	Kentaro Sugiyama (Tokyo University of Science), RyosUnited Kingdome Matsuzaki (Tokyo University of Science), Masahito Ueda (Nihon University), Akira Todoroki (Tokyo Institute of Technology), Yoshiyasu Hirano (Japan Aerospace Exploration Agency)	3571
3621	THE INFLUENCE OF CONSOLIDATION FORCE ON THE PERFORMANCE OF AFP MANUFACTURED LAMINATES	Ebrahim Oromiehie1, B. Gangadhara Prusty1, Paul Compston2, Ginu Rajan3 1School of Mechanical and Manufacturing Engineering, UNSW Australia, NSW 2052, Australia, g.prusty@unsw.edu.au 2Research School of Engineering, The Australian National University, Canberra, ACT 2601 Australia, Paul.Compston@anu.edu.au 3School of Electrical, Computer Telecommunication, Engineering University of Wollongong, Australia NSW 2522, ginu@uow.edu.au	3621
3635	Construction of 3D print of glass composite material using light-curing resin and evaluation of mechanical properties	YUnited Kingdomako Sano, RyosUnited Kingdome Matsuzaki, (Tokyo University of Science)	3635
3684	Experimental Investigation of Processing Parameters on Porosity in Continuous Lattice Fabrication	Martin Eichenhofer1, Joanna. C. H. Wong1, Paolo Ermanni1  1 ETH Zurich, Laboratory of Composite Materials and Adaptive Structures, Tannenstrasse 3, 8092 Zurich, Switzerland	3684
3859	TEMPERATURE CONTROL OF CONTINUOUS CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITES BY 3D PRINTING	Jing Pu (Beihang University, University of Nottingham), Peng Zhuo (University of Nottingham, AVIC Composites Corporation, Ltd.), Shuguang Li (University of Nottingham), Ian Ashcroft (University of Nottingham), Arthur Jones (University of Nottingham)	3859
4006	A novel method for fabricating carbon fibre reinforced silicon carbide composites via 3d printing technology	Wei Zhu, Hua Fu, Zhongfeng Xu, Yusheng Shi, Xinyu Shao, Chunze Yan (Huazhong University of Science and Technology)	4006
4197	Failure Mechanisms of Instability-Assisted 3D Printed Microstructured Fibers	Frederick P. Gosselin, Shibo Zou, Daniel Therriault  (The Polytechnique Montréal)	4197
4265	3D PRINTING OF CONTINUOUS FIBRE REINFORCED THERMOPLASTIC COMPOSITES	Peng Zhuo (The University of Nottingham,  AVIC Composites Corporation, Ltd.), Shuguang Li (The University of Nottingham), Ian Ashcroft (The University of Nottingham), Arthur Jones (The University of Nottingham), Xianghui Hou (The University of Nottingham), Jing Pu (The University of Nottingham)	4265
4274	Innovative process chain for the production of fiber-reinforced functional components based on sandwich structures by Additive Manufacturing	Christian Dörsch, Heiko Rosemann, Matthias Lindermann (Fraunhofer IWES)	4274
4426	ON A FEW ADDITIONAL CONSIDERATIONS FOR APPLYING DENSITY-TYPE TOPOLOGY OPTIMIZATION TO THE CASE OF ADDITIVE MANUFACTURING OF FIBER REINFORCED COMPOSITES	Kohji SuzUnited Kingdomi (Chiba Institute of Technology)	4426
4639	Three-dimensional printing of continuous carbon fiber reinforced thermoplastics by in-nozzle impregnation with compaction roller	Ryo Omuro (Nihon University), Masahito Ueda (Nihon University), RyosUnited Kingdome Matsuzaki (Tokyo University of Science), Akira Todoroki (Tokyo Institute of Technology), Yoshiyasu Hirano (Japan Aerospace Exploration Agency)	4639
4692	CONSTRUCTION OF 3D PRINT OF GLASS COMPOSITE MATERIAL USING LIGHT-CURING RESIN AND EVALUATION OF MECHANICAL PROPERTIES	Yukako Sano1, Ryosuke Matsuzaki2  1 2641 Yamazaki, Noda, Chiba 278-8510, Japan, j7512056@ed.tus.ac.jp	4692
Theme 6 Processing and Manufacturing
6.10 Machining of Composites
Paper ID	Full Paper Title	Author	Paper ID
3236	DESIGN OF A NEW ONE-SHOT TOOL WITH DOUBLE MARGINS STRUCTURE IN DRILLING TITANIUM/COMPOSITE STACKS	Chong Zhang, Zhenyuan Jia, Fuji Wang, GuangJian Bi, Boyu Zhang, Junwei Yin (Dalian University of Technology)	3236
2852	EXPERIMENTAL INVESTIGATION OF CFRP TRIMMING BY MEANS OF SHEARING	F. Klocke, A. Shirobkov, R. Hild, A. Feuerhack, D. Trauth, S. Kerchnawe	2852
2978	EXPERIMENTAL INVESTIGATION OF COMPOSITE MATERIALS DRILLING USING A STEP GUNDRILL	P. Rahme1,*, Y. Landon2, F. Lachaud2, R. Piquet2 and P. Lagarrigue2  1 Lebanese University, Faculty of Engineering, Mechanical Engineering Department; P.O. Box : 27622319, Roumieh, Lebanon 2 Université de Toulouse ; INSA, UPS, Mines Albi, ISAE ; ICA (Institut Clément Ader) ; Bât 3R1, 118 Route de Narbonne, F-31062 Toulouse cedex 9 * Corresponding author, email: prahme@ul.edu.lb	2978
3229	CFRP DRILLING MECHANISM AT LOW TEMPERATURE BASED ON THE TEMPERATURE-DEPENDENT PROPERTIES OF RESIN AND INTERFACE	Hongxiao Wang, Yugang Duan, Wencheng Chen (Xi’an Jiaotong University)	3229
3456	ANALYSIS AND QUANTIFICATION OF DAMAGE IN POLYMER COMPOSITE MATERIALS	Pedro Silva, Stella M. Abreu, João E. Matos, Luís Miguel P :Durão (Polytechnic of Porto (ISEP)	3456
3611	NUMERICAL STUDY OF SPECIAL DRILL BIT FOR CFRP MATERIALS	N. Feito, J.López-Puente, H. Miguelez (Charles III University of Madrid)	3611
3794	PERFORMANCE OF BRAZED DIAMOND TOOL IN GRINDING OF CARBON FIBER REINFORCED POLYMER LAMINATES	Yuhong Liang , Yan Chen*, Yucan Fu, Chaoren Yan, Kai Zheng College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China *Correspondence: ninaych@nuaa.edu.cn	3794
3813	INVESTIGATIONS ON THE THERMAL LOAD AND ACTIVE THERMAL LOAD REDUCTION DURING LASER PROCESSING OF CFRP	R. Staehr, S. Bluemel, P. Jaeschke, O. Suttmann, L. Overmeyer (Laser Zentrum Hannover e.V.)	3813
3935	Microscopic Analytical And Numerical Investigation Of Orthogonal Cutting CFRP	Bin Niu, Wen Wen, Youliang Su, Shiyong Sun, Rui Yang (Dalian University of Technology)	3935
3994	OPTIMIZATION OF CUTTING TOOL GEOMETRIC PARAMETERS IN MILLING OF CFRP LAMINATES	Saad Waqar (Northwestern Polytechnical University), He Yanli (Northwestern Polytechnical University),Ch Asad Abbas (Shandong University), Arfan Majeed (Northwestern Polytechnical University)	3994
4079	SIMULATION OF HEAT TRANSFER MODEL BASED ON FINITE ELEMENT METHOD FOR EDGE TRIMMING OF CFRP	Jamal Sheikh-Ahmad, Fahad Almaskari, FarrUnited Kingdomh Hafeez, Fanyu Meng (The Petroleum Institute)	4079
4080	Artificial Intelligence Based Tool for Predicting of Damage During Drilling of FRP’s	Hitesh Sharma (National Institute of Technology Uttarakhand), Ujendra Kumar Komal (Indian Institute of Technology Roorkee), Inderdeep Singh (Indian Institute of Technology Roorkee), Dinesh Kumar (Indian Institute of Technology Roorkee)	4080
4516	Winding movement trajectory optimization of composite elbows based on four-dof winding machine		4516
4650	Performance of brazeddiamond tool in grinding of carbon fiber reinforced polymer laminates	Yuhong Liang , Yan Chen, Yucan Fu, Chaoren Yan, Kai Zheng (Nanjing University of Aeronautics and Astronautics)	4650
Theme 7 Applications
7.1 Track Aerospace
Paper ID	Full Paper Title	Author	Paper ID
2964	QUALITY SYSTEM DEVELOPMENT FOR THE MANUFACTURE OF PRIMARY COMPOSITE AIRCRAFT STRUCTURE	AiJun Wang (COMAC)	2964
2782	Scaling effects in the impact resistance of flat and cylindrical samples from composite materials	Karimbayev T.D., Chernyshov A.A., Ezhov A.Y. Central Institute of Aviation Motors after Baranov P.I., Moscow	2782
2784	DEVELOPMENT OF BREAKTHROUGH TECHNOLOGIES FOR CREATING NODES AND DETAILS FROM CERAMIC AND POLYMER COMPOSITE MATERIALS FOR SMALL-SIZED AIRCRAFT ENGINES	D.Sc. T.D. Karimbaev, A.Y. Ezhov, M.A. Mezentsev Central Insitute of Aviation Motors by name P.I. Baranov, Moscow, Russia	2784
2818	OPTIMIZATION OF COMPOSITE MATERIAL DE-ICING COMPONENT FOR HELICOPTER ROTOR	Long Chen, Yidu Zhang, Qiong Wu (Beihang University)	2818
3009	The VERTEX program: complex loading and validation of aeronautic composite structures	Bruno Castanié (Institut Clément Ader (ICA))	3009
3024	Study on curing kinetics and curing process of CF/BPR composite	Ye Tian, Haiming Huang (Beijing Jiaotong University)	3024
3257	THE STABILITY INVESTIGATION OF STIFFENED COMPOSITE FUSELAGE PANELS UNDER COMBINED PRESSURE AND COMPRESSION	Bo Ma (Beijing Aeronautical Science & Technology Research Institute), Jifeng Xu (Beijing Aeronautical Science & Technology Research Institute), Tianliang Qin (Beijing Aeronautical Science & Technology Research Institute), Lei Peng (Beijing Aeronautical Science & Technology Research Institute), Zizi Lu (Beijing Aeronautical Science & Technology Research Institute), Yanan Chai (China Aircraft Strength Research Institute)	3257
3310	Aeroelastic analysis of composite laminates	Rammohan.B (PES University), Dineshkumar Harursampath (Indian Institute of Science)	3310
3411	RECENT ADVANCE ON LIGHTWEIGHT GRADED NON-ABLATION STRUCTURE FOR HYPERSONIC VEHICLES	Qin Lu1, Long F. Hu1, Xiao G. Luo1, Ji J. Yu1, Bang C. Ai1  1 China academy of aerospace aerodynamics, Beijing, China, luqin@tsinghua.org.cn	3411
3430	EFFECTS OF COMPRESSION-SHEARING LOAD ON STABILITY OF CONFIGURED COMPOSITE PANELS	JifengXu (Beijing Aeronautical Science & Technology Research Institute), Tianliang Qin (Beijing Aeronautical Science & Technology Research Institute), Lei Peng (Beijing Aeronautical Science & Technology Research Institute), Caoning Su (Beijing Aeronautical Science & Technology Research Institute), Mufeng Duan (Beijing Aeronautical Science & Technology Research Institute), Lingwei Tang (Beijing Aeronautical Science & Technology Research Institute), Yanan Chai (China Aircraft Strength Research Institute)	3430
3431	EXPERIMENTAL AND NUMERICAL INVESTIGATION ON SHEARING STABILITY OF CURVED STIFFENED COMPOSITE PANELS	Tianliang Qin (Beijing Aeronautical Science & Technology Research Institute), Lei Peng (Beijing Aeronautical Science & Technology Research Institute), Bo Ma (Beijing Aeronautical Science & Technology Research Institute), Zizi Lu (Beijing Aeronautical Science & Technology Research Institute), Chaobo Xin (Beijing Aeronautical Science & Technology Research Institute), Yanan Chai (China Aircraft Strength Research Institute), Jifeng Xu (Beijing Aeronautical Science & Technology Research Institute)	3431
3618	CARBON NANOTUBE WEB A PROMISING HEATING ELEMENT FOR ANTI-ICING DE-ICING APPLICATIONS	Xudan Yao (Queen’s University Belfast), Brian G. Falzon (Queen’s University Belfast), Stephen C. Hawkins (Queen’s University Belfast, Monash University)	3618
3675	STUDY ON CRASH OF COMPOSITE FUSELAGE WITH STRAIN RATE EFFECT	Yan Wang (Beijing Aeronautical Science & Technology Research Institute of COMAC), Tian Zhang (Beijing Aeronautical Science & Technology Research Institute of COMAC), Lingwei Tang (Beijing Aeronautical Science & Technology Research Institute of COMAC), Pu Xue (Northwestern Polytechnical University), Jifeng Xu (Beijing Aeronautical Science & Technology Research Institute of COMAC)	3675
3728	Tailor-made thermoplastics: Production technology and quality assurance of a thermoplastic aircraft fuselage skin segment	Matthias Beyrle, Frederic J.C. Fischer, Manuel Endraß, Arthur-Hans Thellmann, Michael Kühnel, Alfons Schuster, Roland Glück, Tobias Gerngross, Michael Kupke (German Aerospace Center (DLR))	3728
3804	SCALING EFFECTS IN THE IMPACT RESISTANCE OF FLAT AND CYLINDRICAL SAMPLES FROM COMPOSITE MATERIALS	D.Sc. T.D. Karimbaev1, A.Y. Ezhov1, A.A. Chernyshov1 1 Central Institute of Aviation Motors by P.I. Baranov, 111116, Aviamotornaya street 2, Moscow, Russia, Email: artem@ciam.ru, www.ciam.ru, tel: +7 (495) 362-49-72	3804
3811	HAIL IMPACT ON COMPOSITE STRUCTURES OF CIVIL AIRCRAFTS	Ye Zhang, Yue Shi, Caoning Su, Jifeng Xu (Beijing Aeronautical Science & Technology Research Institute of COMAC)	3811
3990	Strength analysis of fiber reinforced composite laminates with a circular cutout	Chen Jianlin, Li Zheng, Chu Pengcheng (Peking University)	3990
4170	Exploring deployable configurations using interleaved composites with shape memory capability	H.A. Maples (Imperial College London, University of Vienna), B. Zhang (Imperial College London), P. Robinson (Imperial College London), A. Bismarck (Imperial College London, University of Vienna), W. Li (Imperial College London), C. Burgstaller (Transfercenter für Kunststofftechnik (TCKT))	4170
4251	SUBSONIC FLUTTER EMULATION OF COMPOSITE LAMINATE USING A FEW CONCENTRATED FORCES	Kailash Dhital, Jae-Hung Han (KAIST)	4251
4374	A progressive failure model for composite laminates with initial delamination under compressive loading	Yaling Liu (Beihang University), Libin Zhao (Beihang University), Kangkang Wang (Beihang University), Haiming Hong (Aviation Industry Corporation of China), Jianyu Zhang (Chongqing University)	4374
4434	Experiment Studies and Numerical Simulation of Composite Laminates Opening Plates with Asymmetric Reinforcement	Zheng Quan, Yang Yanzhi, Lin Renbang (Aerospace System Engineering Shanghai)	4434
4436	CONCEPTUAL DESIGN OF BRAIDED PREFORMS FOR THE MANUFACTURING OF COMPOSITE LUG	Elena Sitnikova (The University of Nottingham), Bintuan Wang (AVIC Xi’an Aircraft Design and Research Institute), Ji Yang (AVIC Xi’an Aircraft Design and Research Institute), Jun Chen (AVIC Xi’an Aircraft Design and Research Institute), Shuguang Li (The University of Nottingham)	4436
4459	The crashworthiness simulation and failure mode analysis of composite thin-walled C-channel specimen subject to axial compression load	Haolei Mou, Congyao Ma, Xuehan Zhang, Jiang Xie, Zhenyu Feng (Civil Aviation University of China)	4459
4482	RECENT ADVANCE ON LIGHTWEIGHT GRADED NON-ABLATION STRUCTURE FOR HYPERSONIC VEHICLES	Qin Lu, Long F. Hu, Xiao G. Luo, Ji J. Yu, Bang C. Ai (China academy of aerospace aerodynamics)	4482
4677	APPLICATION OF LEF APPROACH IN THE CERTIFICATION OF AERONAUTICAL COMPOSITE STRUCTURES	Cheng. Chen 1, Lin. Chen 1, Ye. Zhang 1 and Chuanjun. LIU1  1 Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials, Beijing Aeronautical Science & Technology Research Institute of COMAC, Future Science and Technology Park, Changping District, Beijing, 102211 P.R. China	4677
4681	Scaling effects in the impact resistance of flat and cylindrical samples from composite materials	Karimbayev T.D., Chernyshov A.A., Ezhov A.Y. (Central Institute of Aviation Motors after Baranov P.I.)	4681
4682	DEVELOPMENT OF BREAKTHROUGH TECHNOLOGIES FOR CREATING NODES AND DETAILS FROM CERAMIC AND POLYMER COMPOSITE MATERIALS FOR SMALL	D.Sc. T.D. Karimbaev, A.Y. Ezhov, M.A. Mezentsev (Central Insitute of Aviation Motors by name P.I. Baranov)	4682
Theme 7 Applications
7.2 Track Automotive and Rail
Paper ID	Full Paper Title	Author	Paper ID
3200	EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE CRUSHING PROCESS OF COMPOSITE CRASH BOX	Mehmet Engül, Nuri Ersoy (Boğaziçi University)	3200
3782	RESOURCE-EFFICIENT CFRP DESIGN METHODOLOGY FOR AUTOMOTIVE SYSTEMS	Jonathan Schmidt, Anna-Lena Beger and Georg Jacobs(RWTH Aachen University,)	3782
3892	INTRODUCING A NOVEL MANUFACTURING PROCESS FOR AUTOMOTIVE COMPOSITE	S.Cozien-Cazuc (Far-United Kingdom), K.Lindsey (Far-United Kingdom), M.Ravaioli (Far-United Kingdom), H.Amel (University of Warwick), D.J.Hughes (University of Warwick), N.Raath (University of Warwick), G.Williams (University of Warwick), S.Currie (University of Warwick), A.Bools (Expert Tooling), M.Hawrylak (Expert Tooling), C.Voss (Expert Tooling), J.Elford (National Composites Centre, United Kingdom), E.Goodmane (National Composites Centre, United Kingdom)	3892
3953	Development of a CFRP Car Roof with Novel Holistic Structure	Wang Shengqi, Zou Wenbin, Chen Guofeng, Ma Yongshuai, Lin Song, He Peng	3953
3979	CARDBOARD PANELS REINFORCED WITH BRAIDED UNIDIRECTIONAL GLASS RODS FOR VEHICLE CRASH IMPACT ATTENUATION	Gabriel Fortin, Shuhei Yasuda, Akio Ohtani, HiroyUnited Kingdomi Hamada	3979
3983	Lightweight Composite Components for a Rally Competition Car	Gabriel Fortin, Yasumasa Komaki, FUnited Kingdomunaga Osamu, Akio Ohtani, HiroyUnited Kingdomi Hamada	3983
4033	Low-velocity Impact Performance of Carbon Fibre Reinforced Thermoplastic Composites for Automotive Applications	Muhammad Ameeru, Atrash Mohsin, Lorenzo Iannucci, Emile Greenhalgh (Imperial College London)	4033
4126	Design Methodologies for Automotive Components Made from Short Carbon Fiber Reinforced Thermoplastic Materials	Martin Reiter (Johannes Kepler University Linz), Andreas Pröll (Johannes Kepler University Linz), Markus Thurmeier (Audi AG), Zoltan Major (Johannes Kepler University Linz)	4126
4219	DEVELOPMENT OF A CFRTP TRANSMISSION HOUSING	Dr. Thomas Schneider1, Raik Rademacher2, Dr. Jan Reger³and Monika Kreutzmann4  1 P+Z Engineering GmbH, Frankfurter Ring 160, 80807 Munich, Germany, Thomas.Schneider@arrk-engineering.com	4219
4285	Opportunities for the Use of Composite Materials in Rail Applications - a Case Study	EM Keating, N Raath, J Winnett, DJ Hughes (University of Warwick), G Hope, M Ravaioli, S Cozien-Cazuc (Far United Kingdom Ltd)	4285
4582	FLAX FIBER REINFORCED COMPOSITE LATTICE CORES: DESIGN, FABRICATION AND MECHANICAL TESTS	Chong Zhang (Beihang University), Dayong Hu (Beihang University, Aircraft/Engine Integrated System Safety Beijing Key Laboratory), Jun Xu (Beihang University, Xi’an Jiaotong University)	4582
4587	Assessment of the pedestrian protection performance of a sandwich hood with architected lattice cores	Haoyu Chen (Beihang University), Yaobo Wu (Beihang University), Jun Xu (Beihang University, Xi’an Jiaotong University, Tsinghua University), Sha Yin (Beihang University, Xi’an Jiaotong University)	4587
Theme 7 Applications
7.3 Track Bio and Medical
Paper ID	Full Paper Title	Author	Paper ID
2987	Transport and Mechanical Properties of Tumor Interstitium	Shi-Lei Xue, Bo Li, Xi-Qiao Feng (Tsinghua University)	2987
2887	Structure design and analysis of the multilayer stack consisting of both hard and soft layers for flexible electronics	Shuang Li (Chinese Academy of Sciences), Rui Li (Dalian University of Technology), Yewang Su (Chinese Academy of Sciences)	2887
2994	Mechanical Model of Biological Sutures with Fibrous Joints	Yaning Li, Kateryna Miroshnichenko, Igor TsUnited Kingdomrov (University of New Hampshire)	2994
3033	Fabrication and evaluation of chitosan/PLGA bilayered nanofibrous sheet as an effective barrier for preventing tissue adhesion	Oh Hyeong Kwon (Kumoh National Institute of Technology), Donghwan Cho (Kumoh National Institute of Technology), Won Ho Park (Chungnam National University)	3033
3151	FLEXIBLE CAPACITIVE COMPOSITE NEURAL ELECTRODES AND SIMPLIFIED FABRICATION ENABLED BY THERMAL RELEASE TAPE	Zhuocheng Yan, Taisong Pan, Changyong Chen, Yuan Lin (University of Electronic Science and Technology of China)	3151
3268	ANEWHYBRIDCONCEPTFORCFRPPEDICLESCREWS:FINITE ELEMENTANALYSIS	Y. N. Becker1,*; N. Motsch1; J. Hausmann1 1Institut für Verbundwerkstoffe GmbH 1Erwin-Schrödinger Straße, Geb. 58, 67663 Kaiserslautern, Germany *Corresponding author: yves.becker@ivw.uni-kl.de, www.ivw.uni-kl.de	3268
3508	Hybrid Composites of Silica Glass Fibre/ Nano-hydroxyapatite/ Polylactic Acid for Medical Application	Lizhe He, Chenkai Zhu, Xiaoye Cong, Chris D. Rudd, Xiaoling Liu (University of Nottingham Ningbo China)	3508
3606	A Short Review of Mechanics for Skin Modulus Measurement via Conformal Piezoelectric Systems	Yan Shi (Nanjing University of Aeronautics and Astronautics)	3606
3993	Polymerization shrinkage distribution of methacrylate-based and silorane-based dental composites during dental restoration observed by digital image correlation method	J.H. Park (Hanyang University, Seongdong-gu), N.S. Choi (Hanyang University, Ansan)	3993
4343	A Tensegrity Model of Cells under Stretches	Guang-Kui Xu (Xi'an Jiaotong University)	4343
4368	CYCLIC LOADING EFFECTS ON CREASING BEHAVIOR OF SOFT SOLIDS	Z. Li (Chongqing University), Z. Zhou (Chongqing University), S. Tang (Dalian University of Technology)	4368
4388	A COUPLED VISCOELASTICITY AND MULLINS EFFECT MODEL FOR SOFT MATERIALS	Tongqing Lu, Jikun Wang, Ruisen Yang, T. J. Wang (Xi’an Jiaotong University)	4388
4440	Monitoring Eye Fatigue Using Flexible Piezoelectric Sensors	Chaofeng Lü, Shuang Wu, Yangyang Zhang, Yangkun Du (Zhejiang University)	4440
4579	Graphene lamination for high glucose oxidase loading and sensitive glucose detection	Yabin Hao, Chuan Xu, Minghe Fang, Zhe Ying, You Zeng (Chinese Academy of Science)	4579
4591	Printing of tough hydrogels into structures with titin-like domains	Jin Qian (Zhejiang University)	4591
4613	Cell interaction with elastic nanoparticles	Xin Yi  College of Engineering, Peking University, Beijing 100871, China Email: xyi@pku.edu.cn	4613
4624	Mechanics-guided Deterministic 3D Assembly with Biomedical Applications	Yonggang Huang(Northwestern University)	4624
4673	Self-assembly of core-polyethylene glycol-lipid shell (CPLS) nanoparticles for drug delivery	Ying Li (University of Connecticut)	4673
4690	Temperature-dependent elastic properties of brain tissues measured with the shear wave elastography method	Yanping Cao (Tsinghua University), Yan-Lin Liu (Tsinghua University), Guo-Yang Li (Tsinghua University), Ping He (Peking University Third Hospital), Ze-Qi Mao (Tsinghua University)	4690
Theme 7 Applications
7.4 Track Civil Engineering
Paper ID	Full Paper Title	Author	Paper ID
4353	Study on fabrication and properties of the aluminum foilbubble composite	Weiwei Wang(Nanjing University of Aeronautics and Astronautics, Suzhou Junyue New Material Technology co.,ltd), Zhaofeng Chen(Nanjing University of Aeronautics and Astronautics), Xinyang Zhang(Nanjing University of Aeronautics and Astronautics, Suzhou Junyue New Material Technology co.,ltd), Lihe Chen (Nanjing University of Aeronautics and Astronautics, Suzhou Junyue New Material Technology co.,ltd)	4353
3192	Structural behaviour and robustness assessment of an InfraCore® Inside bridge deck specimen subjected to static and dynamic local loading	Wouter De Corte (Ghent University), Arne Jansseune (Ghent University), Wim Van Paepegem (Ghent University), Jan Peeters (FiberCore Europe bv)	3192
Theme 7 Applications
7.5 Track Offshore and Subsea
Paper ID	Full Paper Title	Author	Paper ID
3393	A New Recommended Practice for Thermoplastic Composite Pipes	Andreas T. Echtermeyer, Odd E. Sund, Knut O. Ronold, Ramin Moslemian, Per A. Hassel (DNV GL)	3393
3324	A Micromechanics Approach towards Delamination of Thermoplastic Composite Pipe for Offshore Applications	Sandeep Namdeo, Henk de Boer, Jens de Kanter (Airborne Oil & Gas B.V.)	3324
3549	STUDY OF MWCNTS FILLED TOUGHENED EPOXY FOR ANCHORING COMPOSITE TENSILE ARMOURS INSIDE THE END FITTING OF FLEXIBLE RISER	Rafael Pereira Mattedi (Technip / UFRJ / ECP), Anh-Tuan Do (Technip), Fernando Luiz Bastian (UFRJ), Jinbo Bai (ECP), Delong He (ECP)	3549
3754	Finite Element Analyses Of Enhanced Corrosion Barrier For Polymer Nanocomposites	W.S. Sum (PETRONAS Research, Imperial College London), A.Y.L. Leong (PETRONAS Research, Imperial College London), K.H. Leong (PETRONAS Research), D. Ballint (Imperial College London)	3754
4295	GRAPHENE FILLED EPOXY COATINGS FOR ENHANCED CORROSION PROTECTION	A.Y.L. Leong (Imperial College London, PETRONAS Research), M.A. Mahtar (PETRONAS Research), C. Mattevi (Imperial College London), K.H. Leong (PETRONAS Research), E.Saiz (Imperial College London), W.S. Sum (Imperial College London, PETRONAS Research)	4295
Theme 7 Applications
7.6 Track Renewable Energy
Paper ID	Full Paper Title	Author	Paper ID
3292	THE EXPERIMENTAL STUDY ON THERMAL CONDUCTIVITY OF COMPOSITE PROTON EXCHANGE MEMBRANE	Lei Chen, Shanyou Wang, Zhongzhen Li, Wenquan Tao (Xi’an Jiaotong University)	3292
3128	MULTIFUNCTIONAL COMPOSITES FOR ENERGY STORAGE	Kit-Ying Chan1, Kin-Tak Lau, Baohua Jia, Han Lin and Nishar Hameed 1 Faculty of Science, Engineering and Technology, Swinburne University of Technology, kychan@swin.edu.au	3128
4082	ARTIFICIAL IMPACT DAMAGE FOR ESTIMATING THE SHORT-TERM RESIDUAL BURST PRESSURE OF COPVS	K. Lasn (Norwegian University of Science and Technology), N. P. Vedvik (Norwegian University of Science and Technology), A. T. Echtermeyer (Norwegian University of Science and Technology), P. Blanc-Vannet (Air Liquide Research and Development), O. Bardoux (Air Liquide Research and Development), N. Alexandre (CEA, DAM), F. Nony (CEA, DAM), A. Maldachowska (Wroclaw University of Technology), M. Barcikowski (Wroclaw University of Technology), P. Breuer (Hexagon Composites), P.-S. Heggem (Hexagon Composites), F. Dahmene (Institut de Soudure), S. Bittendiebel (Institut de Soudure)	4082
4225	Assessment of wind turbine blade trailing edge failure with sub-component tests	F. Lahuerta, R.P.L. Nijssen, N. Koorn, D. Smissaert (Knowledge Centre WMC)	4225
4247	COHERENCE RESONANCE OF A MAGNETIC-INDUCED BUCKLED PIEZOELECTRIC ENERGY HARVESTER UNDER STOCHASTIC PARAMETRIC EXCITATION	Li Haitao1, Qin weiyang1, Deng Wangzheng1 Jean  Zu 2 , Tian Ruilan3 1 Department of Engineering Mechanics, Northwestern Polytechnical University, Xi’an, 710072, China	4247
Theme 7 Applications
7.7 Composite Repair
Paper ID	Full Paper Title	Author	Paper ID
3072	DEVELOPMENT OF ROBUST REPAIR PROTOCOLS FOR COMPOSITE AIRCRAFT STRUCTURES	Pascal Hubert, Andrew MacLean, Mathieu Préau(McGill University)	3072
2911	IMPLEMENTATION OF NOVEL DESIGN AND VALIDATION APPROACHES FOR BONDED REPAIRS OF A COMPOSITE AIRCRAFT COMPONENT	John J. Wang1, Paul Chang2, Alan A. Baker3, Andrew Litchfield4 and Michael Vuong5 1, 2 Defence Science and Technology Group, 506 Lorimer St, Fishermans Bend, VIC, Australia, www.dst.defence.gov.au. john.wang@dsto.defence.gov.au; paul.chang@dsto.defence.gov.au 3, 4, 5 Advanced Composite Structures Australia, 198 Lorimer St, Fishermans Bend, VIC, Australia, www.acs-aus.com. a.baker@crc-acs.com.au; a.litchfield@crc-acs.com.au; m.vuong @crc-acs.com.au	2911
3059	Implementation of novel design and validation approaches for bonded repairs of a composite aircraft component	J. Wang(Defence Science and Technology Group), P. Chang(Defence Science and Technology Group), A. Baker(Defence Science and Technology Group & Advanced Composite Structures Australia), M. Vuong(Advanced Composite Structures Australia) and A. Litchfiled(Advanced Composite Structures Australia)	3059
3311	Effect of laminate b-staging on out-of-autoclave composite repair	H. M. Chong, A. S. Subramanian, S. P. Ng, E. Kok and S. Feih(Singapore Institute of Manufacturing Technology)	3311
3518	Influence of the Surface Pretreatment on the Durability of Adhesively Bonded Composite Repairs	F. Roeper(Polymer Competence Center Leoben GmbH), M. Wolfahrt(Polymer Competence Center Leoben GmbH), G. Kucher(FACC Operations GmbH), A. Bubestinger(FACC Operations GmbH), G. Pinter(Chair of Material Science and Testing of Polymers)	3518
3600	OPTIMIZING COMPOSITE REPAIRS WITH GREEN LASER (888)	S.Psarras, G.Sotiriadis, T.Loutas and V.Kostopoulos(University of Patras)	3600
3629	THE EFFECTS OF PRE-BOND MOISTURE AND ENVIRONMENTAL AGING ON THE FRACTURE TOUGHNESS OF BONDED COMPOSITE REPAIRS	A. Rodriguez-Bellido(Composite Technology, Materials and Processes, AIRBUS Paseo John Lennon s/n), S. Wiedmer(Composite Technology, Materials and Processes, AIRBUS Airbus Allee), C. Czirr(3Deutsches Zentrum für Luft- und Raumfahrt (DLR) Lilienthalpl) and J. Renart(Universitat de Girona Campus Montilivi s/n)	3629
3807	Injection repair of composites for automotive and aerospace applications	R. S. Pierce(Northern Ireland Advanced Composites and Engineering (NIACE) centre & Queen’s University), C. Campbell(Bombardier Aerospace), R. Telford(University of Limerick), A. O’Carroll(University of Limerick), T. Young(University of Limerick) and B. G. Falzon(Queen’s University)	3807
3860	DEVELOPMENT OF HIGH TEMPERATURE OVERWRAP COMPOSITE REPAIRS FOR PIPELINES	M.S.F. Samsudin1,*, R.J. Varley2,† , B.N. Dao2, M. Dell ‘Olio2, T. Nguyen2, P. Cass2 and K.H. Leong1 1 PETRONAS Research Lot 3288/3289 Off Jalan Ayer Itam, Kawasan Institusi Bangi, 43000 Kajang, Selangor DE, MALAYSIA. 2 CSIRO Manufacturing Flagship, Normanby Road, Clayton, VIC 3169, AUSTRALIA. *shamsul_farid@petronas.com.my	3860
4081	Easy Repair of Interlaminar Damage Using Interleaved Carbon Fibre/Epoxy Composites	P. Robinson(Imperial College London), B. Zhang(Imperial College London), A. Bismarck(Imperial College London & University of Vienna), H.A. Maples(University of Vienna) and C. Burgstaller(Transfercenter für Kunststofftechnik)	4081
4376	A STUDY ON FATIGUE CHARACTERISTICS OF SCARF JOINT-REPAIRED COMPOSITE LAMINATE UNDER VARIOUS TEMPERATURE ENVIRONMENTS	Hyeon-seok, Choe, Gwang-eun, Lee and Byeong-su, Kwak, Jin-hwe Kweon(Gyeongsang National University)	4376
4377	A REPAIR METHOD OF DELAMINATED COMPOSITE STRUCTURES USING MICRO BOLTS	Sang-Seon Park, Gyu-Seok Kang, Jin-Hwe Kweon(Gyeongsang National University)	4377
4379	AN EXPERIMENTAL DEMONSTRATION OF THE PRESSURIZER	Song-su Chae, Sang-hyun Song and Jin-hwe Kweon(Gyeongsang National University)	4379
4555	DEVELOPMENT OF HIGH TEMPERATURE OVERWRAP COMPOSITE REPAIRS FOR PIPELINES	M.S.F. Samsudin(PETRONAS Research), R.J. Varley(CSIRO Manufacturing Flagship), B.N. Dao(CSIRO Manufacturing Flagship), T.Nguyen(CSIRO Manufacturing Flagship), Y.C. Tan (PETRONAS Research), P. Cass(CSIRO Manufacturing Flagship) and K.H. Leong(PETRONAS Research)	4555
4672	CREATING KISS-BONDS FOR NON-DESTRUCTIVE INSPECTION	Robert Telford1, Anthony O’Carroll1 and Trevor M. Young1  1 Irish Composites Centre, Bernal Institute, University of Limerick, Ireland	4672