2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/9 (Mon.) -- Room H

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/9(Mon.) -- Room A / B-2 / F / G / H / I / J / K

Monday Morning (July 9) -- Room H: 10:40-14:20
Session Title: Metal Matrix Composites (Specialist Session)
Name Affiliation Country Paper Title pdf
Organizers Nikhilesh Chawla Arizona State University USA
Javier Goñi INASMET-FOUNDATION Spain
Krishan K. Chawla University of Alabama at Birmingham USA
Chairperson(s) Krishan K. Chawla
Keynote Andreas Mortensen Ecole Polytechnique Fédérale de Lausanne Switzerland Highly Loaded Ceramic Particle Reinforced Aluminium MoHM1-01
Aude Hauert Ecole Polytechnique Fédérale de Lausanne Switzerland
Randoald Muller Ecole Polytechnique Fédérale de Lausanne Switzerland
Andreas Rossoll Ecole Polytechnique Fédérale de Lausanne Switzerland
Invited Andras Borbely Eötvös University Hungary Mean-window method for the evaluation of effective properties of particle reinforced metal-matrix composites MoHM1-02
Peter Kenesei Eötvös University Hungary
Horst Biermann Technische Universität Bergakademie Freiberg Hungary
Nikhilesh Chawla Arizona State University USA Three-Dimensional (3D) Microstructure Visualization and Finite Element Modeling of the Mechanical Behavior of Metal Matrix Composites MoHM1-03
Guillermo C. Requena Vienna University of Technology Austria EVOLUTION OF THE 3D MICROSTRUCTURE OF A SHORT FIBRE REINFORCED AL-SI ALLOY DURING CREEP MoHM1-04
Hans P. Degischer Vienna University of Technology Austria
Esteban D. Marks Vienna University of Technology Austria
Elodie Boller European Synchrotron Radiation Facility Austria
Invited Hans P. Degischer Vienna University of Technology Austria THERMAL EXPANSION OF Al- AND Mg-MATRIX COMPOSITES MoHM1-05
Fernando A. Lasagni Vienna University of Technology Austria
Michael Schobel Vienna University of Technology Austria
Thomas Huber Siemens VAI Austria
Aly M. Aboraia Assiut University Egypt
top

Monday Afternoon (July 9) -- Room H: 14:20-18:40
Session Title: Metal Matrix Composites (Specialist Session)
Name Affiliation Country Paper Title pdf
Chairperson(s): Yoshimi Watanabe
Javier Goñi Department of Safety and Lightness,INASMENT-FOUNDATION Spain Last Developments in Novel Production Processes for Metal Matrix Composites MoHA1-01
Inigo Sarries Department of Safety and Lightness,INASMENT-FOUNDATION Spain
Maider Garcia de Cortazar Department of Safety and Lightness,INASMENT-FOUNDATION Spain
Jorge Barcena INASMET-FOUNDATION Spain
Javier Coleto INASMET-FOUNDATION Spain
Jason S. H. Lo CANMET, Natural Resources Canada Canada Designing Multi-functional Properties with Squeeze Cast Hybrid Metal Matrix Composites MoHA1-02
Krishan K. Chawla University of Alabama at Birmingham USA Deformation Behavior of Multilayered Metal-Ceramic Nanocomposites MoHA1-03
Nikhilesh Chawla Arizona State University USA
Danny Singh Arizona State University USA
Mark Koopman University of Alabama at Birmingham USA
Yu-Lin Shen University of New Mexico USA
Yoshihisa Tanaka National Institute for Materials Science Japan NANO-MECHANICAL CHARACTERIZATION OF DISCONTINUOUSLY REINFORCED TITANIUM COMPOSITE MoHA1-04
Jenn-Ming Yang University of California, Los Angeles USA
Yu-Fu Liu The University of Tokyo Japan
Yutaka Kagawa The University of Tokyo Japan
Gen Sasaki Hiroshima University Japan Mechanical Properties of Fe Based Fiber / Aluminum Alloy Composites Fabricated by Low-Pressure Infiltration MoHA1-05
Yong-Bum Choi Hiroshima University Japan
Kazuhiro Matsugi Hiroshima University Japan
Kazushi Arita Kolbenschmidt K.K. Japan
Toshio Fujii Hiroshima Prefectural Institute of Industrial Science and Technology Japan
Chairperson(s): Javier Goñi
Joachim Michael Hausmann DLR - German Aerospace Center Germany AFFORDABLE SIC-FIBRE REINFORCED METAL MATRIX COMPOSITE FOR HIGH TEMPERATURE APPLICATIONS MoHA2-01
Hartmut Schurmann DLR - German Aerospace Center Germany
Sang-Bok Lee Korea Institute of Machinery and Materials, Composite Lab. Korea FABRICATION AND MECHANICAL PROPERTIES OF CONTINUOUS FIBER REINFORCED ZR-BASED AMORPHOUS ALLOY COMPOSITES MoHA2-02
Jin-Bong Kim Korea Institute of Machinery and Materials, Composite Lab. Korea
Sang-Kwan Lee Korea Institute of Machinery and Materials, Composite Lab. Korea
Yaw Chuan Lee University of Nottingham UK Experimental Characterization of the Torsional Behaviour of a TiMMC Tube MoHA2-03
Thomas H Hyde University of Nottingham UK
Edward J Williams University of Nottingham UK
Yoshimi Watanabe Nagoya Institute of Technology Japan BENDING STRENGTH OF Fe-Mn-Si-Cr SHAPE MEMORY ALLOY MACHINING CHIPS REINFORCED SMART COMPOSITE MoHA2-04
Hisashi Sato Nagoya Institute of Technology Japan
Teppei Wakatsuki Nagoya Institute of Technology Japan
Tadakatsu Maruyama Awaji Materia CO., LTD. Japan
Tachai Luangvaranunt Chulalongkorn University Thailand FABRICATION OF AL/AL2O3 COMPOSITE BY POWDER FORGING OF ALUMINUM POWDER AND MANGANESE OXIDE POWDER MoHA2-05
Lerlert Tamrongpoowadon Chulalongkorn University Thailand
Katsuyoshi Kondoh Osaka University Japan
Ivi Smid Penn State University USA THERMAL PROPERTIES OF THE DIAMOND-COPPER INTERFACE IN METAL-MATRIX-COMPOSITES MoHA2-06
Erich Neubauer Austrian Research Center Seibersdorf Austria
Michal Besterci Institute of Materials Research, Slovak Academy of Science Slovakia The Fracture Mechanism of Al-Al4C3 System by gin-situ tensile test in SEM MoHA2-07
Oksana Velgosova Technical University Slovakia
Jozef Ivan Slovak Academy of Sciences Slovakia
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.