2007 ICCM-16 Kyoto Japan
Top
Invitation
Table of Sessions
Author Index
Organization & Sponsors
Strategic Alliance Partners and Other Information
ICCM-16 Sixteenth International Conference on Composite Materials

July/9 (Mon.) -- Room G

July -- 8(Sun.) / 9(Mon.) / 10(Tue.) / 11(Wed.) / 12(Thr.) / 13(Fri.)

July/9(Mon.) -- Room A / B-2 / F / G / H / I / J / K

Monday Morning (July 9) -- Room G: 10:40-14:20
Session Title: Green Composites I (Characterization 1, Specialist Session)
Name Affiliation Country Paper Title pdf
Organizers Toru Fujii Doshisha University Japan
Chairperson(s) Toru Fujii
Karine Charlet CRISMAT, ENSICAEN, Caen France Relationship between the morphology and the mechanical behaviour of a flax fibre MoGM1-01
Jean-Paul Jernot CRISMAT, ENSICAEN, Caen France
Moussa Gomina CRISMAT, ENSICAEN, Caen France
Christophe Baley L2PIC, Universite de Bretagne Sud, Lorient
Laurent Bizet LMPG, Universite du Havre, Le Havre
Joel Breard LMPG, Universite du Havre, Le Havre
Yong Cao Yamaguchi University Japan Effect of heat and alkali treatment on mechanical properties of kenaf fibers MoGM1-02
Koichi Goda Yamaguchi University Japan
Shunsuke Sakamoto Yamaguchi University Japan
Ryan P Maloney University of California - San Diego, Department of Structural Engineering USA Degradation of cellulose/hemp biocomposites under various processing and hydrothermal environments MoGM1-03
Vistasp M Karbhari University of California - San Diego USA
Rui-Hua Hu Chonbuk National University, South Korea Korea Study on hygrothermal aging of short jute fiber/PLA composites MoGM1-04
Jae-Kyoo Lim Chonbuk National University, South Korea Korea
Chanakan Asasutjarit Thailand Institute of Scientific and Technological Research (TISTR) Thailand INVESTIGATIONS ON HYGROTHERMAL PERFORMANCE OF COCONUT COIR CEMENT BOARDS UNDER THAI CLIMATE AS DETERMINED BY FIELD TEST AND SIMULATION MoGM1-05
Sarocha Charoenvai Dhurakij Pundit University Thailand
Jongjit Hirunlabh King Mongkutfs University of Technology Thonburi Thailand
Joseph Khedari South-East Asia University Thailand
Daniel Quenard Centre scientifique et technique du batiment (CSTB) France
Mohammad Golzar Tarbiat Modares University, Department of mechanical engineering Iran MEASUREMENT OF PVT ROPERTIES OF WOOD-PLASTIC COMPOSITES MoGM1-06
Nasser Sadeghian Tarbiat Modares University Iran
top

Monday Afternoon (July 9) -- Room G: 14:20-18:20
Session Title: Green Composites II (Characterization 2, Specialist Session)
Name Affiliation Country Paper Title pdf
Chairperson(s): Pankaj K. Mallick
Koichi Goda Yamaguchi University Japan Mechanical properties improvement of natural fiber green composites by cyclic load application MoGA1-01
Takeshi Kaji Yamaguchi University Japan
Takafumi Doi Yamaguchi University Japan
Junji Ohgi Yamaguchi University Japan
Hitoshi Takagi The University of Tokushima Japan Fabrication and characterization of cellulosic nanofiber reinforced composites MoGA1-02
Akira Asano The University of Tokushima Japan
Shoko Toyoyama Kyoto Institute of Technology Japan HYGROTHERMAL PROPERTY OF JUTE-POLYESTER COMPOSITES MoGA1-03
Saswata Sahoo Kyoto Institute of Technology Japan
Asami Nakai Kyoto Institute of Technology Japan
Hiroyuki Hamada Kyoto Institute of Technology Japan
Hiromi Yamamoto Kyoto Institute of Technology Japan Compression molding of paper using twisted paper yarn as reinforcement MoGA1-04
Teruo Kimura Kyoto Institute of Technology Japan
Keiichi Chikamori Kyoto Institute of Technology Japan
Byung S. Kim Korea Institute of Machinery & Materials Korea IMPROVEMENT OF MECHANICAL PROPERTIES FOR JUTE FIBER/PP COMPOSITES BY MALEIC ANHYDRIDE COUPLER MoGA1-05
Byung S. Hwang Korea Institute of Machinery & Materials Korea
Jung H. Lee Korea Institute of Machinery & Materials Korea
Joon H. Byun Korea Institute of Machinery & Materials Korea
Joung M. Park Gyeongsang National University Korea
Session Title: Green Composites III (Applications, Specialist Session)
Chairperson(s): Koichi Goda
Saswata Sahoo Kyoto Institute of Technology Japan A COMPARATIVE STUDY ON THERMOSETTING BIOCOMPOSITES MoGA2-01
Hiroyuki Hamada Kyoto Institute of Technology Japan
Asami Nakai Kyoto Institute of Technology Japan
Kenji Murata Kyoto Institute of Technology Japan Compression Molding of Sandwich Board by Regulating Temperature Distribution in Heating Process MoGA2-02
Teruo Kimura Kyoto Institute of Technology Japan
Pankaj K. Mallick University of Michigan-Dearborn USA Development of Natural Fiber Composite Construction with Imroved Tensile Properties MoGA2-03
Chinmaya Dandekar University of Michigan-Dearborn USA
Tatsuru Toda Doshisha University Japan Development of shoe sole for frozen road surface using bamboo fibers containing rubber MoGA2-04
Kazuya Okubo Doshisha University Japan
Toru Fujii Doshisha University Japan
Yasuhiro Kawakami Moon star Ltd. Co. Japan
Hiroshi Hurutachi Moon star Ltd. Co. Japan
Rik Brouwer University + Lightweight Structures B.V. Netherlands Bamboo Composites made by Vacuum Infusion Technique MoGA2-05
Janvan Kranendonk University + Lightweight Structures B.V. Netherlands
Ryusuke Tanaka Doshisha University Japan DEVELOPMENT OF A PLEASURE BOAT USING BAMBOO FIBER REINFORCED PLASTIC MoGA2-06
Kazuya Okubo Doshisha University Japan
Toru Fujii Doshisha University Japan
Masao Ono Osaka Branch,National Maritime Research Institute Japan
Akio Sakurai Osaka Branch,National Maritime Research Institute Japan
top
Copyright ICCM-16 Local Organizing Committee. All Rights Reserved.