ICCM - 12 Europe 1999

[ HOME ]

Paper ID
Title
Authors
102 MECHANICAL BEHAVIOR OF CIRCULAR COMPOSITE SPRINGS WITH EXTENDED FLAT CONTACT SURFACES Ping-Cheung Tse
104 IN SITU OBSERVATION ON FATIGUE FRACTURE OF MMC QUAN Gaofeng, HE Jiawen, YANG Shengliang, YANG Deming and Lother Wagner
105 PREDICTION OF THE LONG TERM MECHANICAL BEHAVIOUR OF COMPOSITE PIPES UNDER INTERNAL PRESSURE FROM SHORT TERM TESTS Patricia KRAWCZAK, Patrick VANDEVOIR and José PABIOT
106 MEASUREMENT OF MICRO-MECHANICAL INTERFACIAL PROPERTIES OF SIC (NICALONTM) FIBRE/BOROSILICATE GLASS MATRIX COMPOSITES AT ELEVATED TEMPERATURES BY THE SEM-PUSH-OUT TECHNIQUE A. R. Boccaccini, J. Janczak-Rusch, E. Leopold, R. Conradt, L. Rohr, H. Kern
122 THE OPTIMIZED FIBER VOLUME FRACTION FOR MAGNETOELECTRIC COMPOSITES Jin H. Huang, Wen-Long Dai, Hsien-Kuang Liu and Chao-Kuang Chen
123 FRACTURE CRITERIA FOR MULTIPLY CRACKED PIEZOELECTRIC MATERIALS Jin H. Huang, Chieh-Hsuan Tsai, and Hsing-Chia Kuo
124 MODELLING R-CURVE EFFECTS IN DELAMINATION DAMAGE MECHANISMS V. Q. Bui, E. Marechal, H. Nguyen-Dang
125 SHEAR STRENGTH CHARACTERISTICS IN AGED POLYESTER-GLASS FIBRE COMPOSITES F. Segovia, Mª D. Salvador, V. Amigo and C. Bloem
127 ASYMPTOTIC DQ SOLUTIONS OF LAMINATED CIRCULAR CONICAL SHELLS Chih-Ping Wu and Yu-Chang Hung
129 CREEP OF A C/C-SIC COMPOSITE UNDER INTERLAMINAR SHEAR LOADING AT HIGH TEMPERATURES Bärbel Thielicke , Uwe Soltész , Walter Krenkel , Katerina Morawietz
132 CONTINUOUS DAMAGE MONITORING TECHNIQUES FOR LAMINATED COMPOSITE MATERIALS M. Surgeon, M. Wevers
133 GENERAL THEORY FOR THE MODELLING OF LAMINATED MULTI-LAYER PLATES AND ITS APPLICATION FOR THE ANALYSIS OF SANDWICH PANELS WITH PLY DROPS Ole Thybo Thomsen
134 FRACTURE SURFACES OF AL2O3/AL-ALLOY COMPOSITES Xicong Liu and Yue Zhuo
135 STRENGTH OF AL2O3/AL -ALLOY COMPOSITES AT ELEVATED TEMPERATURE Xicong Liu and Yongmin Si
143 A STRENGTH ANALYSIS METHOD OF COMPOSITE PLATE WITH MULTIPLE BOLTED JOINTS Yang Xu , Zhang Yining , Xu Xiwu
145 ANALYTICAL DISCRETE MODEL OF NONSYMMETRIC SANDWICH PANELS AT BENDING V. Polyakov
147 EFFECTS OF FIBER/MATRIX INTERFACE AND ITS COMPOSITION ON MECHANICAL PROPERTIES OF HI-NICALON/CELSIAN COMPOSITES Narottam P. Bansal and Jeffrey I.
148 MONOTONIC AND FATIGUE LOADING BEHAVIOR OF A 2-D WOVEN CERAMICS MATRIX COMPOSITE AT ROOM AND ELEVATED TEMPERATURES M. Al-Hussien, S. Mall and J. R. Calcaterra
152 NANOSTRUCTURAL CHARACTERIZATION OF TERNARY CARBIDES IN CARBON-FIBRE REINFORCED MG-AL MATRICES AND THEIR INFLUENCE ON THE COMPOSITE PROPERTIES A. Feldhoff, E. Pippel, J. Woltersdorf
155 FEM AND EXPERIMENTAL ANALYSIS OF MODE III FRACTURE BEHAVIOR OF COMPOSITE LAMINATES Youjiang Wang and Dongming Zhao
156 DAMAGE ARREST ASSESSMENT OF SUPERSONIC TRANSPORT COMPOSITE SANDWICH PANELS WITH INTEGRAL TEAR STRAP REINFORCEMENTS Nai-Chien Huang , Yao-Chen Li , and Steven G. Russell
157 DAMAGE ACCUMULATION IN COMPOSITE STRUCTURES UNDER REPEATED LOADS Peter Shyprykevich, H. Thomas Hahn, Milan Mitrovic
158 DESIGN METHODOLOGY FOR BUCKLING OF THIN-WALLED LAMINATED COMPOSITE BEAMS Lawrence W. Rehfield and Ulrich Mueller
160 DESIGN OPTIMISATION OF LAMINATED CYLINDERS FOR MAXIMUM BUCKLING STRENGTH M. Walker
161 INFLUENCE OF FIBRE CROSS-SECTIONAL ASPECT RATIO ON MECHANICAL PROPERTIES OF GLASS FIBRE/EPOXY COMPOSITES Lin Ye and Shiqiang Deng
162 HIGH STRENGTH RIGHT ANGLE COMPOSITE JOINTS FOR CIVIL ENGINEERING APPLICATIONS Gerard M Van Erp
163 EFFECT OF NITRIDATION ON PROPERTIES OF SIC MONOFILAMENT SHI Nanlin, , GUO Yanfen, Z X Guo
166 MOISTURE RESISTANCE OF NEW GLASS/EPOXY-ALUMINIUM LAMINATES O.V. Startsev, A.S. Krotov, L.T. Startseva, L.I. Anihovskaya, O.G. Senatorova,V.V. Sidelnikov, L.A. Dementieva
167 3D CHARACTERISATION OF GLASS FIBRES IN COMPOSITES BY CONFOCAL MICROSCOPY A.R. Clarke, C.N. Eberhardt and N.C. Davidson
169 REPAIRING AND STRENGTHENING REINFORCED CONCRETE STRUCTURES USING FIBER-REINFORCED PLASTICS Ibrahim Mahfouz, Shahram Sarkani, Tarek Rizk
172 MECHANICAL BEHAVIOR OF CF/POLYMER COMPOSITE LAMINATES UNDER CRYOGENIC ENVIRONMENT Takahira Aoki, Takashi Ishikawa, Hisashi Kumazawa, and Yoshiki Morino
173 TRANSIENT ELASTIC WAVES PROPAGATING IN A COMPOSITE LAYERED MEDIUM FOR DYNAMIC LOADINGS Chien-Ching Ma and Genn-Sheng Lee
174 BALLISTIC IMPACT BEHAVIOUR OF SIC FIBRE REINFORCED TITANIUM MMCS N.J.Bowman and M.P.Thomas
175 ON CONTINUUM APPROXIMATION IN STABILITY THEORY OF NON-LINEAR COMPOSITES UNDERGOING LARGE DEFORMATIONS Igor A. Guz and Costas Soutis
176 STIFFNESS LOSS DUE TO TRANSVERSE CRACKING AND SPLITTING IN CROSS-PLY LAMINATES UNDER BIAXIAL LOADING Maria Kashtalyan and Costas Soutis
178 EFFECTS OF FABRIC ARCHITECTURAL HETEROGENEITIES ON EFFECTIVE AND SATURATED PERMEABILITIES IN RTM C. Binétruy and J. Pabiot
179 A MINIMALIST SENSOR SYSTEM FOR MOLD FILLING Sylvia R.M. Kueh, Suresh G. Advani and Richard S. Parnas
180 OPTIMUM DESIGN OF FILAMENT WOUND MULTIZONAL COMPOSITE SHELLS E.V. Morozov
183 COMPACTION BEHAVIOR OF FABRIC PREFORMS IN RESIN TRANSFER MOLDING PROCESS Baoxing Chen, Eric J. Lang, and Tsu-Wei Chou
185 CRYSTALLINITY AND INTERPHASE PROPERTIES OF CARBON FIBRE/PEEK MATRIX COMPOSITES Shang-Lin Gao and Jang-Kyo Kim
186 SIC-CUSNSI COMPOSITES BY PRESSURELESS MELT INFILTRATION Ch. Englisch, K. Berroth, P. Bowen, H. Hofmann
187 COST COMPARISONS OF WET FILAMENT WINDING VERSUS PREPREG FILAMENT WINDING FOR TYPE II AND TYPE IV CNG CYLINDERS Frederick W. DuVall
188 POSTBUCKLING FAILURE OF A BLADE-STIFFENED CARBON-EPOXY COMPRESSION PANEL B.G. Falzon, K.A. Stevens, M. Goia and G.A.O. Davies
189 ISOTHERMAL CREEP RESPONSE OF AL-BASED MMCS UNDER TENSILE AND COMPRESSIVE LOADING A.F. Whitehouse, H.M.A. Winand and P.J Withers
190 THERMO-MECHANICAL RESPONSE OF AN IN-SITU COPPER-BASED COMPOSITE K.L.Lee, A.F. Whitehouse, A.C.F. Cocks
191 CHARACTERISATION OF OVEN CURED PMC RADOME PANEL FOR AIR BORNE APPLICATION Niranjanappa A.C., and Dwarakadasa E.S.
192 MODEL OF THERMOMECHANICAL BEHAVIOUR OF POLYMERS IN GLASS TRANSITION STATE AND ITS APPLICATION TO THE ANALYSIS OF TECHNOLOGICAL STRESSES IN POLYMERS V. Matveyenko, N. Trufanov, I. Shardakov
193 EXPERIMENTAL STUDIES OF IMPACT ON MARINE COMPOSITES D. Choqueuse, R. Baizeau, P. Davies
194 TIME-DEPENDENT BEHAVIOR OF TRANSVERSE CRACKING IN CFRP CROSS-PLY LAMINATES Keiji Ogi and Yoshihiro Takao
195 THE DISTRIBUTION AND THE DIFFUSION OF SI ABOVE THE LIQUIDUS IN SICP/AL COMPOSITE Di Zhang ,Tongxiang Fan, Zhongliang Shi, Renjie Wu, T.Sakata, H.Mori
196 MODELING THE MECHANICAL BEHAVIOR OF FABRIC-REINFORCED RUBBER-LIKE MATERIALS P.Y. Manach
197 RESEARCH AND DEVELOPMENT OF SMART GIANT MAGNETOSTRICTION COMPOSITE MATERIALS USING POWDER METALLURGIC TECHNOLOGY AND THEIR APPLICATIONS TO ADVANCED DEVICES H. Eda, Y. Tomita, T. Mori, Y. Okada, J. Shimizu and L. Zhou
198 AUTOMATIC MESH GENERATION OF JOINT / INTERFACE ELEMENTS N.C.Thai, T.Hasegawa, S.Aoyama , and Z.L.Tun
199 DAMAGE EVALUATION OF SMART CFRP-PIEZOCERAMIC-MATERIALS USING NON-DESTRUCTIVE METHODS Gerhard Mook , Juergen Pohl, Fritz Michel, Thomas Benziger
200 THEORY OF ELLIPTICAL SANDWICH CYLINDRICAL SHELLS WITH DISSIMILAR FACINGS Victor Birman and George J. Simitses
202 PROTOTYPE DEVELOPMENT AND DESIGN/ANALYSIS OF A COMPOSITE CAB OF A LIGHT OFF-ROAD VEHICLE Gligorce Vrtanoski, Vladimir Dukovski, Ljuben Dudeski
203 DEVELOPMENT OF THE LOW COST FRM PISTON FOR DIESEL ENGINE Sung-chul Kim, Jun-su Kim, and Tae-won Lim
204 COMPLEXITY BASED COST ESTIMATION MODEL FOR COMPOSITE AEROSPACE STRUCTURES. Jayanthi Kumar, Elizabeth Kendall
205 INTERLAMINAR REINFORCEMENT TO COMPOSITE LAMINATES BY DISTRIBUTING WHISKERS ALONG THE INTERFACE Wen-Xue Wang, Yoshihiro Takao, Terutake Matsubara and Hyoung Soo Kim
206 EFFECTIVENESS AND OPTIMIZATION OF FIBER BRAGG GRATING SENSOR AS EMBEDDED STRAIN SENSOR Xiaoming Tao, Liqun Tang,, Chung-Loong Choy
208 INEXPENSIVE DAMAGE PROPAGATION ANALYSIS FOR COMPOSITE LAMINATES BY USING FEM WITH PLANE ELEMENTS Yoshinobu Shimamura, Akira Todoroki, Hideo Kobayashi and Haruo Nakamura
209 CORROSION BEHAVIOR AND MECHANISM OF GLASS COMPOSITES IN ACIDIC SOLUTIONS Tetsuya Sakai, Hidemitsu Hojo, Shigeru Ono, Kazuyoshi Arai and Ken Tsuda
210 ANALYSIS OF THERMOELASTIC LAMINATED COMPOSITE PLATES AND SHELLS ON THE BASIS OF 3-D ANALYTICAL SOLUTION V. E. Verijenko, P. Y. Tabakov, T. R. Tauchert and S. Adali
211 OPTICAL FIBER SENSOR TO MONITOR THE CHEMICAL DEGRADATION OF FRP Tomonori Tomiyama, Ken Tsuda, Masatoshi Kubouchi
212 PROPERTIES OF CAST MAGNESIUM MATRIX COMPOSITES AT ELEVATED TEMPERATURES K.U. Kainer, F. Moll
213 EFFECT OF DEBONDING MICROPROCESSES ON PARTICULATE FILLED POLYOLEFINES FLOW AND FRACTURE. I. YIELD STRESS1 Victor G. Oshmyan, Irena L. Dubnikova
214 COMPATIBILITY OF SI-C-O FIBER AND SI-C FIBER WITH ALUMINUM J. Pan, M. Yoshida, G. Sasaki, H. Fukunaga, and D. M. Yang
215 EFFECT OF FILLER AGGREGATES STRUCTURE ON COMPOSITE ELASTIC PROPERTIES V. G. Oshmyan, S. A. Patlazhan, S. A. Timan
216 THE BEHAVIOUR OF COLUMNS FOR THE DESIGN OF PULTRUDED FRAMES: ECCENTRICALLY LOADED TESTS N.D. Brown, D. Anderson, and J.T. Mottram
217 INFLUENCE OF CRACK-WAKE DEBONDING IN CERAMIC MATRIX COMPOSITES Yih-Cherng Chiang
218 INFLUENCE OF TRANSCRYSTALLINE INTERPHASE ON FLEXURAL FAILURE OF SHORT CARBON FIBER REINFORCED PEEK COMPOSITES Chi-Cherng Jeng and Ming Chen
219 MONITORING THE DURABILITY OF PPS, NYLON, AND PVDF USING IN SITU FDEMS SENSING FOR EXTENDED USE IN THE FIELD D. Kranbuehl, J. Rogozinski, A. Meyer, C. Higgins, C. Ambler, E. Powell, C. Davis
220 INTERACTION BETWEEN A HOLE AND AN ELASTIC CIRCULAR INCLUSION UNDER A REMOTE UNIFORM HEAT FLOW C. K. Chao
221 DAMAGE ACCUMULATION IN COMPOSITE LAMINATES DUE TO A CONCENTRATED LOAD Hiroshi Suemasu and Osamu Majima
223 SYNTHESIS OF TIC/AL COMPOSITE BY REACTIVE INFILTRATION TECHNIQUE Makoto KOBASHI and Takao CHOH
224 STRUCTURAL DESIGN OF A FIBRE REINFORCED COMPOSITE BRIDGE DECK FOR OFFSHORE APPLICATIONS Paul E Simpson, Gerard M van Erp, Charles H Tranberg
226 THE INFLUENCE OF FIBER ASPECT RATIO ON THE TENSILE AND TEAR PROPERTIES OF SHORT-FIBER REINFORCED RUBBER D. J. Lee and S. R. Ryu
227 STUDY OF IMPACTED COMPOSITE STRUCTURES BY MEANS OF THE RESPONSE SURFACE METHODOLOGY F. Collombet, L. Guillaumat, J.L. Lataillade, P. Davies and A. Torres-Marques
228 DESIGN OF LAMINATED PLATES WITH REQUIRED IN-PLANE, COUPLING AND BENDING STIFFNESSES USING NON-STANDARD PLY ANGLES M. Grédiac
229 3D DAMAGE ANALYSIS APPLIED TO LOW-ENERGY IMPACTS ON COMPOSITE LAMINATES O. Allix , D. Guédra-Degeorges , S. Guinard , A. Vinet
230 RATE DEPENDENCY DURING PROCESSING OF GLASS/THERMOPLASTIC COMPOSITES C.E. Wilks, C.D. Rudd, A.C. Long, C.F. Johnson
232 ORTHOTROPIC RHEOLOGY OF GLASS-MAT-REINFORCED THERMOPLASTICS (GMT): LUBRICATED SQUEEZING FLOW M. A. Dweib and C. M. Ó Brádaigh
233 SELF-CONSISTENT MODELLING OF DAMAGED ELASTIC BEHAVIOUR USING RELIABILITY APPROACH F. Desrumaux, F. Meraghni, and M.L. Benzeggagh
234 FIBRE/MATRIX INTERFACE TESTING USING THE SINGLE FIBRE BROUTMAN TEST C. Ageorges, K. Friedrich, J. Karger-Kocsis
237 A STUDY OF 0°-FIBRE MICROBUCKLING IN MULTIDIRECTIONAL COMPOSITE LAMINATES P. Berbinau and C. Soutis
240 ULTRASONIC MEASUREMENT OF IN-PLANE MODULI OF PULTRUDED COMPOSITES R. Prabhakaran, M. Saha, and T. Galloway
241 A THIRD-ORDER APPROACH FOR THE REINFORCEMENT OF CONCRETE SHELLS WITH EXTERNAL COMPOSITE LAMINATES A. J. M. Ferreira, A. T. Marques , J. C. De Sá
242 CHARACTERIZATION OF DELAMINATION TOUGHNESS OF ANGLE-PLY GLASS/EPOXY CYLINDERS F. Ozdil, L. A. Carlsson and P. Davies
243 ENERGY-ABSORBING CAPACITY OF CELLULAR TEXTILE COMPOSITES: MODELING AND OPTIMIZATION T.X. Yu, P. Xue and X.M. Tao
244 FRACTURE TOUGHNESS OF STRUCTURAL SICP-6061AL/6061AL COMPOSITE Shuyi Qin, Guoding Zhang and Wenlong Wang
246 ACOUSTIC EMISSION STUDIES DURING FATIGUE TESTING OF GFRP ELLIPTIC SPRING ELEMENTS S.K. Malhotra, R. Krishnamurthy, and M. Subramanian
247 BUCKLING OPTIMIZATION OF UNSYMMETRICALLY LAMINATED PLATES UNDER TRANSVERSE LOADS Hsuan-Teh Hu and Zhong-Zhi Chen
248 INFLUENCE OF THE FIBRE/MATRIX INTERFACE ON THE LONG TERM DYNAMIC AND ENVIRONMENTAL STRESS CRACKING BEHAVIOUR OF GLASS/EPOXY COMPOSITES Virginie LIETARD, Patricia KRAWCZAK and José PABIOT
250 ESTIMATION OF ELECTRICAL CONDUCTIVITY OF LCF-PP/PANI-COMPLEX BLENDS R. Taipalus and K. Friedrich
251 INTERFACIAL APPROACH OF DELAMINATION: POSSIBILITIES AND DIFFICULTIES V. Albouys , O. Allix , P. Ladevèze & D. Lévêque
252 DELAMINATION BEHAVIOUR OF Z - PINNED LAMINATES Denis D.R. Cartié and Ivana K. Partridge
253 STIFFNESS OF THE SKINS OF 3D-KNITTED COMPOSITES Dirk Philips, Ignaas Verpoest
254 FERROCEMENT WATER TANKS: NUMERICAL ANALYSIS AND EXPERIMENTAL RESULTS Moita, G.F, Las Casas, E.B, Mantilla Carrasco, E.V. and Bonifácio, S.N.
255 ESHELBY MODELS APPLIED TO WOVEN FABRIC COMPOSITES: A BENCHMARK STUDY G. Huysmans, I. Verpoest, P. Van Houtte
256 FATIGUE OF 3D SANDWICH-FABRIC COMPOSITES UNDER CORE SHEAR LOADING Hermawan Judawisastra, Jan Ivens, Ignaas Verpoest
257 TIME AND TEMPERATURE DEPENDENCE OF FLEXURAL FATIGUE STRENGTH FOR PITCH-BASED CFRP Masayuki Nakada, Yasushi Miyano, Masayuki Ikeda, and Shinichi Takemura
258 TIME AND TEMPERATURE DEPENDENCE OF STATIC, CREEP AND FATIGUE BEHAVIOR FOR CF/EPOXY STRANDS Masayuki Nakada, Yasushi Miyano, Ryosuke Nakamae, and Rokuro Muki
259 TIME AND TEMPERATURE DEPENDENCE OF STATIC, CREEP, AND FATIGUE BEHAVIOR FOR FRP ADHESIVE JOINTS Yasushi Miyano, Masayuki Nakada, Toshiaki Yonemori, Sangwook Sihn,
262 MECHANICAL BEHAVIOUR OF POLYPROPYLENE COMPOSITES CONTAINING ULTRAFINE PARTICLES. CORRELATIONS WITH GRANULOMETRY AND MICROSTRUCTURE P. Mareri, S.Bastide, N. Binda, and A. Crespy
263 STIFFNESS AND FAILURE MODELLING OF TEXTILE COMPOSITES Andreas G. Prodromou, Jan Ivens, Gert Huysmans, Stepan Lomov and Ignaas Verpoest
264 MECHANICAL IN PLANE PERFORMANCE OF AEROTISS ( 4/5D) Henk Pattyn, Ignaas Verpoest, Jan Ivens,
265 FOLDED HONEYCOMBS FAST AND CONTINUOUS PRODUCTION OF THE CORE AND A RELIABLE CORE-SKIN BOND Jochen Pflug, Ignaas Verpoest, Dirk Vandepitte
266 HYGROTHERMAL DEFORMATION OF COMPOSITE SANDWICH PANELS Ernest G. Wolff, Hong Chen, and Darrell W. Oakes
267 SIZE EFFECTS ON PLAIN AND FIBER REINFORCED CONCRETES AT HIGH LOADING RATES Sidney Mindess and Klaus-Alexander Rieder
268 STRENGTH OF ADHESIVE BONDED COMPOSITE LAP SHEAR JOINTS WITH AND WITHOUT EMBEDDED CRACKS Liyong Tong
272 DELAMINATION OF TAPERED COMPOSITE LAMINATES SUBJECTED TO MECHANICAL AND HYGROTHERMAL LOADINGS Kyohei Kondo and Hideaki Sanada
273 EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE FORMING OF THERMOPLASTIC SANDWICHES O. Rozant, P.-E. Bourban, J.-A.E. Månson
274 THE STRUCTURAL BEHAVIOUR OF MONOCOQUE FIBRE COMPOSITE TRUSS JOINTS Matthew F. Humphreys, Gerard Van Erp, Charles H. Tranberg
275 MODELLING OF TRANSVERSE CRACKING UNDER UNIAXIAL FATIGUE LOADING IN CROSS-PLY COMPOSITE LAMINATES : EXPERIMENTAL VALIDATION C. Henaff-Gardin, I. Goupillaud, M.C. Lafarie-Frenot, S. Buhr
276 EFFECTS OF TEMPERATURE AND FIBER ORIENTATION ON THE MODE I INTERLAMINAR FRACTURE TOUGHNESS OF CARBON/EPOXY COMPOSITES Hyoung Soo Kim, Wen-Xue Wang and Yoshihiro Takao
277 EXACT THREE-DIMENSIONAL MODELS FOR LAYERED COMPOSITES Sergey M. Galileev, Nicolas N. Gubin, Alexander V. Matrosov
279 THE MELT SHEAR VISCOSITY OF POLYPROPYLENE/GLASS BEAD COMPOSITES AT HIGH EXTRUSION FLOW RATES J.Z. Liang,, R.K.Y. Li, C.Y. Tang and S.W. Cheung
281 MODELLING THE EFFECT OF A DISCRETE INTERPHASE ON THE FRAGMENTATION PROCESS IN POLYMER MATRIX COMPOSITES R. Lane, S. A. Hayes and F. R. Jones
282 CORRELATION BETWEEN EXPERIMENTAL RESULTS AND FINITE ELEMENT ANALYSIS OF A MODEL COMPOSITE CONTAINING AN INTERPHASE WITH KNOWN PROPERTIES S. A. Hayes, R. Lane and F. R. Jones
283 BISMUTH-BASED THERMOELECTRIC NANOCOMPOSITES F. Brochin, X. Devaux, B. Lenoir, R. Martin-Lopez, H. Scherrer
284 PROCESSING & PROPERTIES OF CONTINUOUS FIBRE REINFORCED TITANIUM MATRIX AXI-SYMMETRIC COMPOSITES J. Beddoes, A.K. Koul, P. Saxena
285 SMART COMPOSITES APPLIED TO CONTINUOUS IN-SERVICE DAMAGE Cyril TAMIATTO, Patricia KRAWCZAK, José PABIOT and Fabrice LAURENT
287 MIXED NUMERICAL AND EXPERIMENTAL METHODS FOR TIME-DEPENDANT STIFFNESS DETERMINATION FOR COMPOSITE MEMBRANE UNDER BIAXIAL LOADS C. Szostkiewicz , P. Mailler , P. Hamelin
288 DURABILITY OF EXTERNAL CARBON EPOXY REINFORCEMENT OF CONCRETE Ferrier E., Hamelin P.
290 DEVELOPMENT OF AN OPTIMIZATION METHOD FOR COMPOSITE MATERIALS G. Terrel, G. Duvaut, P. Geoffroy
295 LASER PROJECTION LINKS COMPOSITE DESIGN TO MANUAL FABRICATION E. D. Ledbetter
296 DEVELOPMENT AND VERIFICATION OF A THERMAL MODEL FOR A NOVEL AUTOMATED COMPOSITE FABRICATION PROCESS: LAMINATED OBJECT MANUFACTURING (LOM) Don Klosterman, Lawrence Flach, Eric Bryant, Richard Chartoff
297 ADVANCED COMPOSITES MANUFACTURED VIA DRY POWDER PREPREGGING T. A. Bullions, A.C. Loos, and J.E. McGrath
298 AN OBJECT-ORIENTED FINITE ELEMENT PROCESSING MODEL FOR ORIENTED STRAND BOARD WOOD COMPOSITES Pascal Hubert and Chunping Dai
299 MANUFACTURE A BEND-TWIST COUPLED BEAM Cheng Huat Ong , Julie Wang and Stephen W. Tsai
301 PERFORMANCES OF Y 2 SIO 5 COATING SYSTEM FOR CARBON/CARBON COMPOSITES Masayuki Kondo, Yuzuru Ogura, and Tatsuo Morimoto
305 ULTRA LIGHTWEIGHT SATELLITE ANTENNA WITH STRETCHED SURFACE Shigenori KABASHIMA, Tsuyoshi OZAKI, Toru TAKAHASHI, Yoshihiko KONISHI
306 NON DESTRUCTIVE INSPECTION OF WEAK BONDS IN ADHESIVELY BONDED JOINTS Dong Fei, Krishnakumar Shankar
307 INFLUENCE OF THE SHEET FORMING TECHNIQUE ON THE IMPREGNATION QUALITY OF TEXTILE REINFORCED THERMOPLASTIC COMPOSITES Sofie Baeten, Alleson Herman Corey, Ignaas Verpoest
309 IN-PLANE PERMEABILITY MEASUREMENTS: STABILITY, REPEATABILITY AND REPRODUCIBILITY T. S. Lundström, R. Stenberg, R. Bergström, H. Partanen, and P-A. Birkeland
310 FINITE ELEMENT DAMAGE PREDICTION OF COMPOSITE STRUCTURES L. Gornet
311 DAMAGE/WEIGHT LOSS RELATIONSHIP OF POLYMER MATRIX COMPOSITES UNDER THERMAL AGEING X. Colin, C. Marais and J.P. Favre
312 EDGE DELAMINATION OF COMPOSITE LAMINATES UNDER LOW CYCLE FATIGUE Nobuhide Uda and Kazuo Kunoo
313 NOVEL DIELECTRIC SENSOR SETUP FOR FLOW AND CURE MONITORING IN RESIN TRANSFER MOULDING Alexandros A. Skordos, Panagiotis I. Karkanas and Ivana K. Partridge
314 FAILURE BEHAVIOR OF 3D-BRAIDED COMPOSITES MODELING BY A MULTI-SCALE VARIATIONAL APPROACH D. Bigaud, P. Hamelin
315 EFFECTIVE PROPERTIES 0F NON-LINEAR ORTHOTROPIC POROUS-DUCTILE MATERIALS Stefano Mariani and Alberto Corigliano
316 IMPACT BEHAVIOR OF COMBINED COMPOSITE ALUMINIUM TUBE FOR AUTOMOTIVE APPLICATIONS J. BOUCHET, A. BENNANI, E. JACQUELIN, G. LAGARDE, P. HAMELIN
317 COMPARISON OF DAMAGE BEHAVIOUR IN STRUCTURES REINFORCED BY KNITTED AND WOVEN TEXTILE FABRICS B. Lamy, E. Dixneuf
318 A STUDY OF THE DAMPING OF A SANDWICH MATERIAL FUNCTION OF THE INTERFACE CORE/SKIN BY VISCOELASTICITY C. Burtin, ,P. Iachkine
319 SURFACE MODIFICATION TO IMPROVE THE IMPACT PERFORMANCE OF NATURAL FIBRE COMPOSITES J. George, J. Ivens and I. Verpoest
321 ON THE USE AND LIMITATIONS OF CONCENTRIC CYLINDER MODELS FOR POLYMER MATRIX COMPOSITES Edgard Jacobs, Ignaas Verpoest, Janis Varna
322 ANALYTICAL MODEL FOR DEBONDED INTERFACES ASSOCIATED WITH FIBRE FRACTURES OR MATRIX CRACKS L N McCartney
323 TENSILE FATIGUE DAMAGE DEVELOPMENT IN PLAIN WEAVE AND KNITTED FABRIC COMPOSITES (GFRP) Surya D. Pandita, Gert Huysmans, Martine Wevers, Ignaas Verpoest
324 DETERMINATION OF INTERFACIAL FRACTURE TOUGHNESS FROM THE FRAGMENTATION TEST DATA BY VARIATIONAL MODELS W. Wu, I. Verpoest, J. Varna
325 EXPERIMENTAL DESIGN APPROACH TO OFF-LINE QUALITY CONTROL IN FILAMENT WINDING M. Lossie, D. Vandepitte, and K. Olofsson
326 THE EFFECT OF SIMPLE SHEAR ON STIFFNESS AND STRENGTH OF FABRIC LAMINATES J. Hofstee and F. van Keulen DLR
327 0-3 PIEZO-ELECTRIC COMPOSITES DESIGN TO THE SHAPE CONTROL OF STRUCTURES F. Erba, F. Thiebaud, D. Perreux, M. Troccaz
328 THERMAL FATIGUE OF LOCALLY FIBER REINFORCED MAGNESIUM WITH GRADED STRUCTURE W. Schäff, F. Heinrich, C. Körner and R. F. Singer
329 DAMAGE STRENGTH OPTIMIZATION OF LAMINATES BY A RELIABILITY-BASED METHOD F. Richard, D. Perreux
330 UNIFICATION OF FIBRE/ MATRIX INTERFACIAL MEASUREMENTS WITH LASER RAMAN MICROSCOPY Costas Galiotis,, Alkis Paipetis and Christian Marston
333 SURFACE AND BULK STRESS/ STRAIN MEASUREMENTS IN COMPOSITE LAMINATES WITH A FIBRE-OPTIC RAMAN PROBE Costas Galiotis, and Bish Arjyal
334 BEHAVIOUR OF INFLATED FABRIC BEAMS AT MEDIUM PRESSURES Christian Wielgosz - Etienne Leflaive- Jean-François Dubé- Jean-Christophe Thomas
335 DYNAMIC FRACTURE OF NOTCHED COMPOSITE LAMINATES E.V. Morozov, S.A. Silantiev and E.G. Evseev
336 IMPERFECTION SENSITIVITY OF MODERATELY THICK COMPOSITE CYLINDRICAL SHELLS G.J. SIMITSES and G.A. KARDOMATEAS
338 COMPOSITE MATERIAL ADVANCES IN THE GOLF INDUSTRY Jerome S. Berg
339 FLOW-INDUCED ALIGNMENT OF FIBERS Charles A. Petty, Steven M. Parks, Shiwei, M. Shao
340 TESTING AND FAILURE ANALYSIS OF A CFRP WINGBOX CONTAINING A 150J IMPACT E. Greenhalgh , B. Millson , R. Thompson and P. Sayers
341 INVESTIGATION OF THE FAILURE MECHANISMS FOR DELAMINATION GROWTH FROM EMBEDDED DEFECTS E. Greenhalgh and S. Singh
342 MANUFACTURING EFFECTS ON CURE CONSOLIDATION IN FILAMENT WOUND COMPOSITE STUCTURES Troy E. Meink, H-M Herman Shen, Steven M. Huybrechts
343 DAMAGE DETECTION AND VIBRATION CONTROL OF A DELAMINATED SMART COMPOSITE PLATE Aditi Chattopadhyay, Changho Nam, and Youdan Kim
345 CLIMATIC EXPOSURE EXPERIMENT OF STRUCTURAL ADHESIVES FOR HELICOPTER Bin Liang, Qingfang Liu, Zilong Liao
347 MICROBOND TEST FOR THE FIBER/MATRIX INTERFACIAL SHEARING STRENGTH Atsushi Wada and Hiroshi Fukuda
349 COMPRESSION AFTER IMPACT (CAI) BEHAVIOR OF CF/PIXA STIFFENED PANELS FOR HSCT EMPENNAGE Takashi Ishikawa, Masamichi Matsushima, Eugene Keng Goy Lim#, Yoichi Hayashi& and Murray L. Scott$
352 REHABILITATION OF CONCRETE STRUCTURES WITH CFRP STRIPS GLUED INTO SLITS Blaschko, M.; Zilch, K.
353 ANALYSIS OF FRACTURE MECHANICS ON SKEW CRACK NEAR INTERFACE OF BIMATERIALS Chen Haoran, Wang Limin,, Xu Shilang, Wang Jindong
354 DELAMINATIONS UNDER PURE MODE II LOADING SHOW SIGNIFICANT LOCAL MODE I BEHAVIOUR Isabelle Paris and Anoush Poursartip
355 THRESHOLD DAMAGE CRITERIA FOR THIN AND THICK LAMINATES SUBJECTED TO LOW VELOCITY IMPACT LOADS Ajit D. Kelkar, Christopher Grace and J. Sankar
356 ANALYTICAL AND EXPERIMENTAL ELASTIC BEHAVIOR OF TWILL WOVEN LAMINATE Pramod Chaphalkar and Ajit D. Kelkar
357 GRID STIFFENED STRUCTURES: A SURVEY OF FABRICATION, ANALYSIS AND DESIGN METHODS Steven M. Huybrechts, Ph.D., Steven E. Hahn, Troy E. Meink
359 MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL MATRIX COMPOSITES PRODUCED BY LCCS PROCESS Kiyoshi Mizuuchi, Takashi Takeuchi, Masao Fukusumi, Masami Sugioka, Hiroshi Nagai and Kanryu Inoue
361 RESIDUAL STRESS MINIMIZATION TO PREVENT PROCESS-INDUCED DAMAGES IN THICK-WALLED CFRP PIPES Eui-Sup Shin and Hideki Sekine
362 EFFECTS OF TEST CONDITIONS ON MODE II INTERLAMINAR FRACTURE TOUGHNESS OF FOUR-POINT ENF SPECIMENS Kazuro Kageyama, Isao Kimpara, Toshio Suzuki, Isamu Ohsawa, Makoto Kanai and Hitosh Tsuno
366 CRACK PROPAGATION PROPERTIES OF GFRP LAMINATES UNDER ACID STRESS ENVIRONMENT Kazuhiro Onodera , Masaru Mizuno and Hiroyuki Kawada
368 SENSOR TECHNIQUES TO VALIDATE THE STRESS INTENSITY IN CRACKED METALLIC PANELS REPAIRED WITH BONDED COMPOSITE PATCHES Alan Baker and Bayram Aktepe
369 CREEP RUPTURE OF 3-D WOVEN SI-TI-C-O FIBER/SIC-BASED MATRIX COMPOSITE WITH GLASS SEALANT Toshio Ogasawara, Takashi Ishikawa, Naoto Suzuki, Ian J. Davies, Michiyuki Suzuki, Jun Gotoh and Tetsuro Hirokawa
370 DIRECT EVALUATION OF AXIAL COMPRESSIVE PROPERTIES OF CARBON FILAMENT Kazuhiro Fujita, Hiroshi Shioyama, and Yoshihiro Sawada
371 DETERMINATION OF COMPOSITE EFFECTIVE CHARACTERISTICS AND COMPLEX MODULES FOR SHELL STRUCTURES FROM THE SOLUTION OF INVERSE PROBLEM V. Matveyenko, N. Yurlova, D. Grachev
372 IMPACT PROPERTIES OF GLASS FIBER COMPOSITES WITH RESPECT TO SURFACE TREATMENT AND FIBER VOLUME FRACTION S. S. Cheon and D. G. Lee
373 DAMAGE MECHANICS MODEL FOR OFF-AXIS FATIGUE BEHAVIOR OF UNIDIRECTIONAL CARBON FIBER-REINFORCED COMPOSITES AT ROOM AND HIGH TEMPERATURES M. Kawai
376 FLEXURAL BEHAVIOR OF C/C COMPOSITES AT HIGH TEMPERATURE Yoshihiro Sawada, Norio Iwashita, Kazuhiro Fujita, and Akira Shinjo
377 THREE-DIMENSIONAL DESIGN ANALYSIS FOR HYSTERETIC BEHAVIOR OF TINI-SMA FIBER EMBEDDED SMART COMPOSITES M. Kawai
378 EVALUATION OF ADVANCED SIC FIBERS FOR REINFORCEMENT OF CMC H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston,
379 INTERFACIAL ASPECTS OF ELECTRODEPOSITED MULTI-FIBER REINFORCED COMPOSITES USING ELECTRO-MICROMECHANICAL TECHNIQUES AND ACOUSTIC EMISSION Joung-Man Park, Sang-Il Lee, Young-Min Kim, Ki-Won Kim, and Dong-Jin Yoon
384 EXPERIMENTAL AND THEORETICAL STUDY OF DYNAMIC STOCHASTICITY EFFECTS UNDER CRACK PROPAGATION IN STRUCTURES O.B. Naimark, V.A. Barannikov, S.V. Uvarov, D.N. Naldaev
385 DAMAGE-FRACTURE TRANSITIONS AS NONLINEAR PROBLEM OF DEFECTS SOLUTION O.B. Naimark, V.A. Barannikov, S.V. Uvarov, D.N. Naldaev
387 DIRECT NUMERICAL SIMULATION OF COMPOSITE STRUCTURES Jeong Ho Kim, Hea Jin Yeo and Seung Jo Kim
389 F.E. INVESTIGATION OF THE NON-CRIMP FABRICS COMPRESSIVE AND INTERLAMINAR BEHAVIOURS S. Drapier and M.R. Wisnom
390 CONTINUOUS FIBER REINFORCED ALUMINUM WIRES M. Doktor, J. Blucher, and H.P. Degischer
391 IN-PLANE MECHANICAL PROPERTIES OF CF/EPOXY 3-D ORTHOGONAL INTERLOCKED FABRIC COMPOSITE Naoyuki WATANABE, Shigeomi OSHIBA, Takashi ISHIKAWA
392 THERMAL CYCLING CREEP OF PARTICLE REINFORCED ALUMINIUM P. Prader , H.P. Degischer
393 DYNAMIC STABILITY OF A COMPOSITE CANTILEVER BEAM WITH VISCOELASTIC PROPERTIES UNDER A FOLLOWER FORCE Tae-Woo Kim, Ji-Hwan Kim
395 STRESS CONCENTRATION IN ALUMINA/FIBRE EPOXY MODEL COMPOSITES H. MAHIOU,, A. BEAKOU and R.J. YOUNG
396 COMPOSITE MATERIALS AND STRUCTURES TESTING BY ELECTRONIC HOLOGRAPHY Dan N. Borza
397 COMPARATIVE STUDY ON THE DETERMINATION OF THE ELASTIC PROPERTIES OF COMPOSITE MATERIALS BY TENSILE TESTS AND ULTRASOUND MEASUREMENT S. Mistou, M. Karama, R. EL Guerjouma, D. Ducret, J.P. Faye, and B. Lorrain
399 SICF/SIC COMPOSITES FOR STRUCTURAL APPLICATIONS IN FUSION POWER REACTORS: THE TAURO BLANKET G. Aiello, L. Giancarli, Y. Poitevin, J. F. Salavya, J. Szczepanskib
400 END-EFFECTORS FOR PLY PLACEMENT AND CONSOLIDATION IN LOW COST COMPOSITE MANUFACTURE H D Do, R Paton, I Herszberg and S John
401 AN INTERFACE DELAMINATION MODEL BASED ON REGULARIZED STRONG DISCONTINUITY R. Larsson and N. Jansson
403 RELIABILITY OF THE STRENGTH AND FRACTURE PROCESS OF SIC/AL COMPOSITE WITH DIFFERENT INTERFACIAL SHEAR STRENGTH Yun LU, Mitsuji HIROHASHI and Jin PAN
404 THERMAL CONDUCTIVITY OF CONTINUOUS CARBON FIBRE REINFORCED COPPER MATRIX COMPOSITES J.Koráb, P.Šebo, P.Štefánik, S.Kavecký and G.Korb
405 EFFECT OF THE MATRIX PROPERTIES ON THE STRENGTH AND RELIABILITY OF FIBER REINFORCED METALS COMPOSITE Yun LU, Jin PAN, Koichi GODA, and Hideharu FUKUNAGA
407 PREDICTION OF THE ELASTIC TENSOR OF 3D COMPOSITES BY AN ANALYTICAL MODEL C. TALLARON , S. BARRE
409 CORRELATION OF MICRO- AND MACROCOMPOSITE PROPERTIES THROUGH FRAGMENTATION TESTING A. Abu Bakar and F. R. Jones
410 PREPARATION AND PROPERTIES OF CERAMIC MATRIX COMPOSITES WITH TYRANNO FIBERSTM AS THE REINFORCEMENT M.Sato, T.Nakayasu, Y.Inoue, N.Miyamoto and T.Yamamura
411 EXPERIMENTAL INVESTIGATION OF FATIGUE BEHAVIOUR IN COMPOSITE BOLTED JOINTS Roman Starikov and Joakim Schön
412 MODELLING THE MECHANICAL AND THERMAL PROPERTIES OF SHORT FIBRE COMPOSITES F.W.J. van Hattum, C.A. Bernardo, F.J. Macedo, and J.A. Ferreira
413 EVALUATION OF PARTICLES AND POROSITIES VOLUME FRACTION IN ALUMINUM MATRIX COMPOSITES M. Gonzalez, C. Bathias, G. Dominguez, J. Masounave
415 FABRICATION OF TITANIUM METAL MATRIX COMPOSITE BLING Katsuyoshi Moriya , Yasushi Nojima , Shigeto Nishide , and Koichi Yasuhira
417 EVALUATION OF DEBONDING ENERGY RELEASE RATE OF EXTERNALLY BONDED FRP SHEETS FOR REHABILITATION OF INFRASTRUCTURES Koji YAMAGUCHI, Isao KIMPARA, and Kazuro KAGEYAMA
418 INFLUENCE OF SOME STRUCTURAL PARAMETERS ON BOTH THEORETICAL AND EXPERIMENTAL COMPRESSIVE STRENGTH OF LAMINATES S. Drapier, L. Daridon, and J.-C. Grandidier
419 ADHESIVE INTERACTIONS IN INTERPHASES: COMPETITION BETWEEN ACID-BASE AND DIFFUSION MECHANISMS Elena Pisanova, Serge Zhandarov, and Edith Mäder
420 COMPRESSIVE FAILURE OF NOTCHED GRAPHITE/EPOXY-HONEYCOMB SANDWICH PANELS J. M. Mirazo M. G. Toribio and S. M. Spearing
421 LOW VELOCITY IMPACT DAMAGE IN GLARE(C) FIBRE METAL LAMINATES Jeremy F. Laliberté, Cheung Poon, and Paul V. Straznicky
422 ADHESIVE PRESSURE AS FAILURE CRITERION IN MICROMECHANICAL TESTS Serge Zhandarov, Elena Pisanova, and Konrad Schneider
423 INFLUENCE OF THE INTERFACE STRENGHT ON LOCAL FAILURE PROCESSES IN FIBER REINFORCED COMPOSITES C. Marotzke, A. Hampe, L. Qiao
424 THE EFFECT OF TRANSVERSE CRACKS ON THE CHARACTERISTICS OF A LAMINATE M. Boutaïb, M. Hamdaoui, R. Lavabre and E. Ramahefarison
425 INTERFACIAL EFFECT ON THE MECHANICAL PROPERTIES OF GLASS/PHENOLIC COMPOSITE Tohru Morii, Jan Ivens, and Ignaas Verpoest
426 BEHAVIOUR OF POLYMER - FIBER INTERFACE UNDER VARIOUS LOADING RATES Brantseva T.V., Antonov A.V., Gorbatkina Yu.A., Kerber M.L.
427 COMPARISON BETWEEN TI3AL AND NI3AL INTERMETALLICS USED AS REINFORCEMENTS IN ALUMINIUM ALLOY MMCS. V. Amigó, M. D. Salvador, D. Busquets, C. Ferrer
428 PROCESSING OF NEXTEL 720/MULLITE COMPOSITION COMPOSITE USING ELECTROPHORETIC DEPOSITION S. Kooner, W.S. Westby, P.M. Farries, C.M.A. Watson, P. Boother and R.A. Shatwell
429 IMPACT RESPONSE OF CARBON FIBRE ROD, WITH AND WITHOUT A TENSIONED KEVLAR OVERWIND K.D. Potter, M.R. Wisnom
430 FATIGUE PROPERTIES OF CF/PEEK CORTICAL BONE SCREWS PRODUCED BY COMPOSITE TRANSFER SQUEEZE FORMING (CTSF) Tognini R., Loher U., Peter Th., Raschle R., Mayer J., Wintermantel E.
431 VASTLY INCREASED FILAMENT PRODUCT OUTPUT J. Lowrie and Mc Larty
433 SMART NDT USING ELECTRICAL RESISTANCE METHOD FOR DELAMINATION MONITORING IN CFRP Kaori YUSE and Claude BATHIAS
434 INCORPORATION OF UNSATURATED POLYESTER BASED MATRIX COMPOSITES INTO A PP-PE COPOLYMER FOR RECYCLING J.N Reygrobellet, J.M. Lopez Cuesta, A. Crespy
436 THE EFFECTS OF DIFFERENT TYPES OF SHORT FIBERS ON THE BEHAVIOR AND STRENGTH OF REINFORCED CONCRETE BEAMS José M. Calixto, Landry S. Vidal Filho, and Carla M. Gonçalvez
438 ENVIRONMENTAL EFFECTS ON THE MECHANICAL PROPERTIES OF PLAIN WEFT KNITTED CF/PEEK AND GF/PET COMPOSITES Roland Reber, Joop de Haan, Joerg Mayer and Erich Wintermantel
439 DYNAMICAL CHARACTERISTICS OF FIBRE COMPOSITES Werner Hnfenbach Carsten Holste Günther Pfeifer
440 DESIGN OF COMPOSITE WING ACCESS COVER UNDER IMPACT LOADS A.F. Johnson, G. Kempe and J. Simon
441 FAILURE OF 2.5D CF-SIC COMPOSITES CREEP TESTED IN TENSION Séverine DARZENS, Guillaume BOITIER, Jean-Louis CHERMANT, Jean VICENS
442 COMPRESSION MOULDING OF THERMOPLASTIC COMPOSITE SANDWICH COMPONENTS Lance D. McGarva and B. Tomas Åström
443 STRAIN CAPABILITY OF OPTICAL FIBRE BRAGG GRATING SENSING IN COMPOSITE SMART STRUCTURES C Y Wei, S W James, C C Ye, N D Dykes R P Tatam, and P E Irving
444 LAMB WAVES GENERATION USING A TRANSDUCER EMBEDDED IN A COMPOSITE PLATE Emmanuel Moulin, Jamal Assaad, Christophe Delebarre and Daniel Osmont
445 FAILURE ANALYSIS OF THICK COMPOSITE RINGS UNDER DIAMETRAL COMPRESSION Hassan Mahfuz, Aloke Pal, Mojibur Rahman, Shaik Jeelani, Leif Carlsson and Peter Davies
446 OPTIMIZATION OF A COMPOSITE MATERIAL BOX-BEAM FOR USE IN A HAPTIC DEVICE Pierre Cyr and Dr. Larry B. Lessard
447 RESPONSE OF INTEGRAL ARMOR UNDER HIGH VELOCITY IMPACT AN EXPERIMENTAL AND FINITE ELEMENT STUDY Hassan Mahfuz, Yuehui Zhu, Anwarul Haque, Uday Vaidya and Shaik Jeelani
448 EFFECT OF RIB GEOMETRY ON THE BUCKLING BEHAVIOR OF COMPOSITE ISOGRID CYLINDERS Hassan Mahfuz, Mojibur Rahman, Earnest Foster, Uday Vaidya, Anwarul Haque and Shaik Jeelani
449 MODELING THE INFLUENCE OF STITCHING ON DELAMINATION GROWTH IN STITCHED WARP-KNIT COMPOSITE LAP JOINTS E.H. Glaessgen, I.S. Raju and C.C. Poe, Jr.
451 THE DYNAMIC STRESS INTENSITY FACTORS FOR SEMI-INFINITE CRACKS IN ORTHOTROPIC MATERIALS C. Rubio-Gonzalez and J.J. Mason
452 THE NEW ACTION PLANE RELATED STRENGTH CRITERION IN COMPARISON WITH COMMON STRENGTH CRITERIA J. Kopp, W. Michaeli
453 FINITE ELEMENT POSTPROCESS METHOD FOR COMPOSITE PLATES WITH GENERAL LAYUPS MAENGHYO CHO and YEOUNJIN CHOI
454 OBSERVATION OF FIBRE-FIBRE INTERACTIONS IN SINGLE-FIBRE MODEL SAMPLES S. Lütze, S. Ritter, G. Busse
456 BEHAVIOUR OF BRIDGE DECKS REINFORCED BY GFRP Tarek Hassan, Haney Louka, Amr Abdelrahman and Sami Rizkalla
457 NON-LINEAR BEHAVIOUR OF PLAIN WEFT-KNITTED CARBON FIBRE REINFORCED COMPOSITES J. de Haan, R. Reber, J. Mayer and E. Wintermantel
460 HIGH STRAIN RATE PROPERTIES OF AN ALUMINA DISPERSION REINFORCED COMPOSITE I. W. Hall and M. Guden
462 AUTOMATED SHIFT FOR TIME-TEMPERATURE SUPERPOSITION Sangwook Sihn and Stephen W. Tsai
467 ISOTHERMAL AGING OF AN ADVANCED HIGH TEMPERATURE CARBON FIBRE COMPOSITE Bronwyn Fox, Jonathan Hodgkin, Ben Jar, Adrian Lowe, Trevor Morton and Zbigniew Stachurski
468 LIFE ENHANCEMENT AND REPAIR OF STRUCTURES USING SHAPE MEMORY ALLOY COMPOSITE PATCHES Kelly A. Tsoi, Xiaoming Wang, Yiu-Wing Mai, and Stephen C. Galea
469 A RATE DEPENDENT ANISOTROPIC DAMAGE MODEL FOR COMPOSITE MATERIALS AT ELEVATED TEMPRERATURES George Z. Voyiadjis and Babur Deliktas
470 CHARACTERISTICS OF COMPRESSION FAILURE OF CARBON/EPOXY LAMINATED COMPOSITE Tian Xiang Mao and Vijay Gupta
471 THE MECHANICAL PROPERTY CHANGE OF A NEWLY DEVELOPED EPOXY SYSTEM AT HIGH TEMPERATURE AND OXIDATIVE CONDITIONS Jae-Rock Lee, Soo-Jin Park , and Yeung-Keun Kim
472 ANALYSIS AND DESIGN OF CFRP GRIDS FOR REINFORCED CONCRETE Charles E. Bakis, Suresh Pannala, Renata S. Engel, and Thomas E. Boothby
473 INFLUENCE OF CURVATURE ON FOAM CORE SANDWICH PANELS M. A. Battley, H. Enoksson
474 RESONANCE CONTROL OF GENERALLY SUPPORTED SMART BEAM-PLATES USING FOURIER SERIES METHOD Chien-Chang Lin, and Huang-Nan Huang
477 ENVIRONMENTAL DURABILITY OF POLYURETHANE BASED THERMOSET ADHESIVE BONDING OF A COMPOSITE TO GALVANIZED STEEL Jonathan Verhoff, Ganesan Kumar, Karthik Ramani, Norman Blank, Steven Rosenberg
478 PROCESSING AND DURABILITY COMPARISON OF A POLYURETHANE THERMOSET AND A HOT-MELT THERMOPLASTIC ADHESIVE SYSTEM BONDED TO GALVANIZED STEEL Chongchen Xu, Jonathan Verhoff and Karthik Ramani
481 BALLISTIC [S1]PERFORMANCE OF MONOLITHIC CERAMIC BACKED BY S2-GLASS/ VINYL ESTER COMPOSITES A. Haque, A. Abutalib, K. Rahul, U. K. Vaidya, H. Mahfuz and S. Jeelani
485 STEEL FIBER CONCRETE: THE COMPOSITE MATERIAL IN HIGHWAY ENGINEERING UNDER THE ALTAI REGION CONTINENTAL CLIMATE CONDITIONS Klara V. Talantova, Nikolai M. Mikheev, Sergei V. Tolstenev, Leonid A. Chvoinski
486 THE INFLUENCE OF RUBBER PARTICLE CONCENTRATION ON FRACTURE TOUGHNESS OF INTERLAYER-TOUGHENED VINYL-ESTER/GLASS FIBRE COMPOSITE Dejan Stevanovic, P. -Y. Ben Jar, Adrian Lowe & Shankar Kalyanasundaram
487 GEOMETRIC CONSIDERATIONS IN THE EXPERIMENTAL AND FINITE ELEMENT ANALYSES OF THE MICRODROPLET TEST A. Hodzic, S. Kalyanasundaram, A. E. Lowe and Z. H. Stachurski
489 TRANSIENT HEAT CONDUCTION AND THERMAL STRESSES IN FUNCTIONALLY GRADED MATERIALS Seiichi Nomura
490 ARE COMPOSITES SUITABLE FOR REINFORCEMENT OF SHIP STRUCTURES? I. Grabovac, P.J. Pearce, A. Camilleri, K. Challis and J. Lingard
491 FREE VIBRATION ANALYSIS OF CLAMPED-FREE COMPOSITE CYLINDRICAL SHELLS WITH AN INTERIOR RECTANGULAR PLATE Young-Shin Lee and Myoung-Hwan Choi
492 FINE EFFECTS IN EPOXY BINDERS OF POLYMER COMPOSITE MATERIALS AFTER EXPOSURE TO THE SPACE ENVIRONMENT Oleg V. Startsev, A. Paillous, V.V. Isupov, A.S. Krotov, and E.F. Nikishin
495 DESIGN AND OPTIMISATION OF COMPOSITE PLATES WITH CUTOUTS Rodney S. Thomson and Murray L. Scott
497 BIODEGRADABLE POLYESTER MATRIX REINFORCED WITH HEMP FIBRES - EFFECT OF FIBRE REFINEMENT BY STEAM EXPLOSION A. Keller, H. Zerlik, E. Wintermantel
499 PROCESS SIMULATION OF MULTIPLE MATERIAL FILAMENT WOUND PIPES Kurt Olofsson, Lesley Hudson and Richard Dutton
500 MULTICRITERION OPTIMIZATION OF LAMINATE STACKING SEQUENCE FOR MAXIMUM FAILURE MARGINS Petri Kere and Juhani Koski
501 ACOUSTIC EMISSION IN LAMINATED BEAMS DUE TO FIBER FRACTURES Mats Åberg and Peter Gudmundson
503 MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A NANOCOMPOSITE OXIDE SYSTEM : THE NEXTEL 720 FIBRE. F. Deléglise, M.H. Berger, A.R. Bunsell.
508 STRUCTURE-PROPERTY RELATIONSHIPS OF COMPOSITE COIL SPRINGS PROCESSED BY RTM Byung-Sun. Kim, Joon-Hyung Byun, and Byung-Ha Kim
509 INFLUENCE OF THERMALLY INDUCED STRAINS ON SUBSEQUENT CREEP LOADING, USING MICRO RAMAN SPECTROSCOPY Jan Schjvidt Thomsen and Ryszard Pyrz
510 VIBRATION CHARACTERISTICS OF CFRP LAMINATES WITH EMBEDDED SHAPE MEMORY ALLOY FIBERS Masaki Sato, Hideki Sekine, and Yuichi Hayakawa
511 PREPARATION OF SIC REINFORCED ALUMINA-YAG EUTECTIC COMPOSITES M. Yoshida, K. Nagahisa, J. Pan, G. Sasaki, and H. Fukunaga
512 A GENERAL APPROACH TO THE MEASUREMENT OF THERMAL RESIDUAL STRAINS AND STRESSES IN SICW/AL COMPOSITES Q. Y. Liu, W. D. Fei
513 INCORPORATION OF OXIDE FIBRES IN GLASS MATRIX COMPOSITES T. Leutbecher, D. Hülsenberg, V. Winkler, R. Lipfert
516 STRENGTHENING OF TUNNEL SUPPORTS USING CARBON FIBRE COMPOSITES S.S.J. Moy, F.Barnes, J. Moriarty, A.F. Dier, A. Kenchington, B. Iverson
517 ACOUSTIC EMISSION MONITORING UNDER FATIGUE CONDITIONS OF ALUMINIUM MATRIX COMPOSITES REINFORCED BY CONTINUOUS ALUMINA FIBRES. Marie Jacquesson, Pascal Paulmier, Nathalie Godin , Roger Fougères
518 EFFECT OF EMBEDDED OPTICAL FIBERS ON THE STRUCTURAL INTEGRITY OF COMPOSITES Arne Skontorp
520 THE DETERMINATION OF INNER SURFACES IN COMPOSITES BY X-RAY REFRACTION A. H. Hampe, K.-W. Harbich, M. P. Hentschel and H.-V. Rudolph
521 INTERFACE MODIFICATION OF POLYMER-DERIVED SIC SINGLE-FIBER AND TI ALUMINIDE COMPOSITES T. Suzuki, H. Umehara, and X.L. Guo
522 TENSILE DEFORMATION AND FRACTURE BEHAVIOUR OF MAGNESIUM MATRIX COMPOSITES PRODUCED BY DIFFERENT CASTING METHODS M. Y. Ahmad, P. B. Prangnell and H. Karimzadeh
523 A NOVEL MANUFACTURING CELL FOR A NEW GENERATION OF COMPOSITE PROCESSING AND APPLICATIONS M.D. Wakeman, P.-E. Bourban, F. Bonjour, P. Berguerand, J.-A. E. Månson
524 INFLUENCE OF MATRIX CRACKS AND SWELLING ON MOISTURE ABSORPTION IN CROSS-PLY GFRP LAMINATES. Jan-Erik Lundgren and Peter Gudmundson
526 FATIGUE PROPERTIES OF SCS-6/SP700 TITANIUM MATRIX COMPOSITE Akira Fukushima, Chikara Fujiwara, Yukio Kawachi, and Kouichi Yasuhira
527 LIFE EXTENSION OF AN F/A-18 AILERON HINGE USING BONDED COMPOSITE REINFORCEMENT R.J.Chester, M.Heller, S.Whitehead, R.Kaye and B.Teunisse
528 COMMINGLED CF/PEEK HYBRID YARNS FOR USE IN TEXTILE REINFORCED HIGH PERFORMANCE ROTORS B.-D. Choi, O. Diestel and P. Offermann
529 INFLUENCE OF REACTIVE ALLOYING ELEMENTS ON THE MECHANICAL PROPERTIES OF CARBON/MAGNESIUM COMPOSITES Sarala Djanarthany, Marie-Hélène Vidal-Sétif, Roger Valle, Jean-Louis Raviart, Maurice Rabinovitch
530 EFFECTS OF FIBRE ARCHITECTURE ON DEFORMATION DURING PREFORM MANUFACTURE A.C. Long, B.J. Souter, F. Robitaille, and C.D. Rudd
531 NONDESTRUCTIVE INSPECTION AND EVALUATION METHODS FOR COMPOSITES USED IN THE MARINE INDUSTRY J. R. Weitzenböck , A. T. Echtermeyer , P. K. Grønlund , F. Artiga-Dubois , and M. Parmar
533 ELECTRON MICROSCOPY ANALYSIS OF SQUEEZE CAST AL18B4O33W/AZ91D COMPOSITES G. Sasaki, M. Yoshida, J. Pan and H. Fukunaga
534 MODELING OF THE ELECTROMAGNETIC BEHAVIOUR OF MULTI-LAYER CARBON/EPOXY MATERIALS. D. Martinez, M. Lemistre, M. Lambert and D. Lesselier
537 DYNAMICS OF VOID FORMATION UPON CURING OF EPOXY RESIN Yongsung Eom, Louis Boogh, Véronique Michaud, Paul Sunderland and Jan-Anders Månson
538 COMPARISON OF CONTINUOUS AND PULSE LASER MODES USING A CO2 LASER TO DEVELOP SURFACE MMCS IN TITANIUM ALLOYS C. Hu , J.G.Sirgo and T. N. Baker
541 MATRIX CRACKING IN A (0/90)2S GFRP LAMINATE LOADED IN FLEXURE P.A.Smith, S.L.Ogin and G.Faulks
543 A COMPARATIVE STUDY OF MODE I FATIGUE CRACK PROPAGATION IN FOAM CORES FOR SANDWICH STRUCTURES BY USING DIFFERENT TEST SPECIMENS Andrey Shipsha, Magnus Burman, Dan Zenkert
544 ELASTIC BEHAVIOUR OF PARTICULATE NITRIDE-NITRIDE OR BORIDE-NITRIDE COMPOSITES E. Fenard, M. Desmaison-Brut, S. Clédat, C. Gault, M. Huger
545 SOLID MECHANICS DRAPING SIMULATIONS OF WOVEN FABRICS L. Dong, C. Lekakou and M. G. Bader
546 LONGITUDINAL COMPRESSIVE BEHAVIOUR OF CARBON FIBRES N. Oya, D. J. Johnson, and H. Hamada
547 DESIGN OF HYBRID LAMINATED COMPOSITE SANDWICH PANELS FOR MAXIMUM BUCKLING LOADS: THE INFLUENCE OF THERMAL ACTIONS Maria Antonietta AIELLO and Luciano OMBRES
548 STRESS ANALYSIS OF A HYBRID FLYWHEEL ROTOR USING A MODIFIED GENERALIZED STRAIN ASSUMPTION S. K. Ha, S. K. Choi , D. J. Kim and I. J. Chin
549 DEVELOPMENT OF COMPOSITE GRID TUBES FOR THE REINFORCEMENT OF CONCRETE COLUMNS S-W.R. Lee, Z. Li, J.M. Tang, S. Lee, and P. Tong
550 CRACK MICROSTRUCTURE DURING THE CARBONIZATION OF CARBON FIBRE REINFORCED PLASTICS TO CARBON/CARBON COMPOSITES J. Schulte-Fischedick, M.Frieß, W.Krenkel, R.Kochendörfer and M.König
551 THE ROLE OF INTERLEAF/BASE LAMINA INTERPHASE IN TOUGHENING MECHANISM OF INTERLEAF-TOUGHENED CFRP Masaki Hojo , Satoshi Matsuda , Shojiro Ochiai , Atsushi Murakami and Hideo Akimoto
553 RESIDUAL STRESSES IN HIGH VOLUME FRACTION METAL MATRIX COMPOSITES J. Quinta da Fonseca, R. F. Cochrane, P.M. Mummery and M. R. Daymond
555 A NOVEL METHOD FOR THE PUSHOUT TEST IN COMPOSITES Rebecca Sinclair and Robert J. Young
556 HIGH TEMPERATURE STABLE CERAMIC COMPOSITES DERIVED FROM NANO-METALLOPOLYCARBOSILANE AND NANO-METALLOPOLY(BORO)SILAZANE PRECURSORS Edwin Kroke, Lutz Ruwisch, Ralf Riedel, Brian Derby, Beverley Inkson, Alexander M. Tsirlin, Sergey P. Gubin, Ella M. Moroz, Nina A. Popova and Elena K. Florina.
558 THERMOELASTIC ANALYSIS OF SANDWICH CONSTRUCTION TEE-JOINTS LOADED IN COMPRESSION J M Dulieu-Barton, J S Grigg, R A Shenoi, S D Clark, and A R Chambers
562 SMART COMPOSITES WITH INTEGRATED TINY PIEZOELECTRIC FIBERS Dieter Sporn, Winfried Watzka, Andreas Schönecker and Kord Pannkoke
563 LOAD-RATIO DEPENDENCE ON FATIGUE LIFE OF COMPOSITES Joakim Schön and Anders F. Blom,
564 COST-EFFECTIVE MANUFACTURING OF HOLLOW COMPOSITE STRUCTURES BY BLADDER INFLATION MOULDING Nicolas Bernet, Pierre-Etienne Bourban and Jan-Anders E. Månson
568 MECHANICAL PROPERTIES OF MOSI2-AL2O3 COMPOSITES PROCESSED BY SHS A.L. Dumont, J.P. Bonnet, and C. Gault
570 SIMULATION OF A FIBER PUSHOUT TEST IN A MODEL POLYESTER/EPOXY COMPOSITE Philippe H. Geubelle, Guoyu Lin and Nancy R. Sottos
571 HYGROTHERMAL AGING OF POLYIMIDE MATRIX COMPOSITE LAMINATES John A. Nairn and Man-Hee Ha
734 DESIGNING WITH ANISOTROPY. PART 1 : METHODS AND GENERAL RESULTS FOR LAMINATES. G. Verchery.
572 DESIGNING WITH ANISOTROPY. PART 2 : LAMINATES WITHOUT MEMBRANE-FLEXURE COUPLING P. Vannucci, X. J. Gong, G. Verchery
573 DESIGNING WITH ANISOTROPY. PART 3 : QUASI-HOMOGENEOUS ANISOTROPIC LAMINATES P. Vannucci, X. J. Gong & G. Verchery.
574 MEASUREMENT OF MANUFACTURINGB DISTORTION IN FLAT COMPOSITE LAMINATES Donald W. Radford, Shenghong Fu, Daniel Derringer, and Jonathan D. Davis
576 DENSIFICATION OF C/C COMPOSITES USING PULSED CHEMICAL VAPOR INFILTRATION Donald W. Radford and Roger A. Ross
577 EXPERIMENTAL DETECTION OF INTERPHASES IN GLASS FIBRE/POLYPROPYLENE COMPOSITES Gisela Pompe and Edith Mäder
578 STIFFNESS MODELING OF TRIAXIALLY BRAIDED TEXTILE COMPOSITES Joon-Hyung Byun
580 THE CHARACTERIZATION OF OPEN HOLE STRENGTHS OF STITCHED POLYMER COMPOSITE LAMINATE Gregory D. Tracy and Keith T. Kedward
581 ULTRASONIC STUDY OF THE ANISOTROPIC DAMAGE OF UNIDIRECTIONAL GLASS-EPOXY COMPOSITES DURING HYGROTHERMAL AGEING R. El Guerjouma, D. Ducret and J.C. Baboux
582 SOME PROPOSED EXPERIMENTAL TESTS FOR USE IN FINITE ELEMENT SIMULATION OF COMPOSITE FORMING B.K. Cartwright , P. de Luca , J. Wang , K. Stellbrink, R. Paton
583 HYGRO-THERMAL TRANSIENT ANALYSIS FOR HIGHLY STABLE STRUCTURES S. Da Mota Silva , H. Dumontet , C. Hauviller , P. Kanoute, and R. Ribeiro
586 DENDRITIC-BASED ADDITIVES FOR POLYMER MATRIX COMPOSITES L. Boogh, G. Jannerfeldt, B. Pettersson, H. Björnberg and J.-A.E. Månson
587 ENERGY ABSORPTION DURING FLEXURAL FAILURE OF LAYERED METAL FOAM / CERAMIC COMPOSITES A.E.Markaki and T.W.Clyne
589 PREPARATION OF CERAMIC/METAL FOAM LAMINATES USING AN IN SITU FOAMING TECHNIQUE V. Gergely, F. Simancík, T. J. Matthams and T. W. Clyne
590 PROGRESS & PROMISE IN DISCONTINUOUSLY REINFORCED ALUMINUM Benji Maruyama and Daniel B. Miracle
592 THE EFFECT OF PORES ON COMPRESSIVE FAILURE OF HIGHLY ALIGNED CARBON FIBRE REINFORCED EPOXY COMPOSITE RODS PRODUCED BY PULTRUSION C.J.Creighton and T.W.Clyne
593 CHARACTERISATION AND CONTROL OF FIBRE ALIGNMENT DURING PREPREG MANUFACTURE C.J.Creighton, M.P.F.Sutcliffe and T.W.Clyne
594 THERMOMECHANICAL CHARACTERIZATION OF SIC FIBER TOWS AND IMPLICATIONS FOR CMC H.M. Yun and J.A. Di Carlo
595 INTEGRATION OF POLYMER AND COMPOSITE MATERIALS FOR ENHANCED DESIGN FREEDOM AND COST-EFFICIENCY P.-E. Bourban, F. Bonjour, N. Bernet, M.D. Wakeman, J.-A. E. Månson
596 RESIDUAL STRESSES AND THERMOPLASTIC ADHESIVE ENVIRONMENTAL CRACKING Wenping Zhao and Karthik Ramani
598 PERFORMANCE OF A PROSTHETIC INTERVERTEBRAL DISC R. G. Hudgins and J.D. Muzzy
603 ELABORATION AND CHARACTERIZATION OF SIC/TIAL COMPOSITES Sarala Djanarthany, Jean-Claude Viala , Jean Bouix
604 A STANDARD CHARACTERISATION OF SATURATED AND UNSATURATED FLOW BEHAVIOURS IN POROUS MEDIA Y. Henzel, , J. Bréard , D. Lang and F. Trochu
606 OXIDE/OXIDE COMPOSITE FIBERS FOR ENHANCED CREEP RESISTANCE Vincent H. Hammond, Frank E. Wawner, and Dana M. Elzey
608 SANDWICH BEAMS WITH MID-PLANE ASYMMETRY SUBJECTED TO LATERAL LOADS - ANALYSIS AND OPTIMIZATION Nihar R Satapathy, and Dr. Jack R Vinson.
609 EVALUATION OF FIRE PERFORMANCE OF COMPOSITE MATERIALS FOR AIRCRAFT STRUCTURAL APPLICATIONS A. Johnston, R. Cole, A. Jodoin, J. MacLaurin, and G. Hadjisophocleous
610 IN-SITU POLYMERISATION OF PA12 FOR THERMOPLASTIC COMPOSITES PROCESSING A. LUISIER, P.-E. BOURBAN AND J.-A. E. MÅNSON
614 NUMERICAL SIMULATION OF IN-PLANE DAMAGE PROGRESSION IN LAMINATED COMPOSITE PLATES Kevin V. Williams , Anthony M. Floyd , Reza Vaziri , and Anoush Poursartip
615 ANALYSIS OF ADHESIVELY BONDED SINGLE LAP JOINTS IN SRIM COMPOSITES UNDER FLEXURAL LOADING K. Satish Kumar, Z. Xia and P. K. Mallick
616 EFFECTS OF CHEMICAL TREATMENTS ON HIGH PERFORMANCE POLY(P-PHENYLENE BENZOBISOXAZOLE) FIBERS Gwomei Wu, Chin-Huang Hung and Shih-Jung Liu
620 SMA COMPOSITES FOR AERO-STRUCTURE REPAIRS Xiaoming Wang, Kelly Tsoi, Lin Ye, Yiu-Wing Mai, Stephen C. Galea and L. R. Francis Rose
621 DEVELOPMENT OF CYANATE ESTER BASED CARBON/CARBON COMPOSITES Kunigal Shivakumar, Felix Abali, Robert Sadler, and James McCoy
623 EFFECT OF MATRIX AND REINFORCEMENT MORPHOLOGY ON MECHANICAL PROPERTIES OF AL/TINI SHAPE MEMORY COMPOSITE Changhun Han, Ildong Choi, Kyungmox Cho and Ikmin Park
624 STRENGTH AND FATIGUE LIFE OF CARBON/EPOXY LAMINATES UNDER BIAXIAL LOADING C. S. Lee, W. Hwang, H. C. Park, and K. S. Han
625 CHARACTERIZATION OF MECHANICAL AND IN-SITU FRACTURE BEHAVIORS OF REACTION SQUEEZE CAST HYBRID AL MATRIX COMPOSITES Changook Son, Ikmin Park, Kyungmox Cho, and Ildong Choi
626 PHYSICAL AND MECHANICAL CHARACTERIZATIONS OF GLASS/VINYL ESTER COMPOSITE UNDER ENVIRONMENTAL CYCLING Yang Zhong and Jianren Zhou
627 MODELING OF VOID FORMATION DURING RESIN TRANSFER MOLDING Seong Taek Lim, Moon Koo Kang and Woo Il Lee
628 EVALUATING THE MECHANICAL PROPERTIES OF GLASS FIBER/EPOXY INTERFACES USING THE SLICE COMPRESSION TEST Hiroyuki KAWADA, Norihiko TANIGUCHI, and Kun-Nan Tsay
629 CURE KINETIC MODEL OF EPOXY RESINS FOR LIQUID MOLDING PROCESSES Renata S. Engel, and Jared S. Strait
631 EXTERNAL PRESSURE TESTING OF A LARGE-SCALE COMPOSITE PIPE Guillermo Ramirez and Michael D. Engelhardt
633 METHODOLOGY TO EVALUATE IMPACT DAMAGE ON FIBER REINFORCED COMPOSITE TUBES Guillermo Ramirez, Yajai Promboon, and Michael D. Engelhardt
634 EFFECT OF SIC REINFORCEMENT ON MECHANICAL PROPERTIES OF SIC/AL METAL MATRIX COMPOSITES Ho J. Ryu, Hyun K. Jung and Soon H. Hong
635 ACOUSTIC EMISSION FOR CYCLIC DAMAGE EVALUATION ON FIBERGLASS PIPES FABRICATED FOLLOWING RTP-1 METHODS AND SPECIFICATIONS. Guillermo Ramirez, and Michael D. Engelhardt
637 SCREENING COMPOSITES MATERIALS BASED ON GRAPHITE FILLERS. S.B. Bibikov, V.N. Gorshenev, Yu.N. Novikov.
640 INTERFACIAL STRENGTH OF OPTICAL FIBRES Klas Levin
642 DETERMINATION OF COMPOSITE MATERIAL CONSTANTS BY DIRECT NUMERICAL SIMULATION Jin Yeon Cho, Jeong Ho Kim, Chang Sung Lee and Seung Jo Kim
643 DEVELOPMENT OF A COMPOSITE TORQUE LINK FOR HELICOPTER LANDING GEAR APPLICATIONS H.G.S.J. Thuis
648 THERMOMECHANICAL BEHAVIOR OF COMPOSITE PLATE USING UNMIXING-MIXING SCHEME IN HYPERSONIC FLIGHT ENVIRONMENT Nam Seuck Kweon and Seung Jo Kim
654 FRACTURE ANALYSIS OF FILAMENT-WOUND FRP COMPOSITES USING RING BURST TEST Shuichi Wakayama, Akihiro Horide and Masanori Kawahara
655 ACOUSTIC EMISSION NDT OF COMPOSITES DAMAGED BY STATIC AND DYNAMIC LOADING IN AQUEOUS ENVIRONMENTS J M Hale, J T Evans, G Kotsikos & A G Gibson
658 MODULAR DESIGN OF NANOCOMPOSITE STRUCTURES BASED ON (-AL2O3 AND MECHANISMS OF STRUCTURAL TRANSFORMATIONS THEREIN N.A.Bulienkov, Phan Van An
659 DESIGN CRITERIA FOR CONTINUOUS FIBRE REINFORCED MMC BOLT CONNECTORS Eric Neussl, Dirk Fettweis, Peter R. Sahm, Jérôme Pora, Dominique Schuster
660 OPTIMISATION OF HOLLOW GLASS FIBRES AND THEIR COMPOSITES Mr. Martyn J.Hucker and Dr. Ian P. Bond
662 MICRO-MACRO MODELLING OF THE INFLUENCE OF THE DISCONTINUOUS REINFORCED COMPOSITES HETEROGENEITIES ON DAMAGE AND FAILURE PROPERTIES K.Derrien, D.Baptiste
663 CURVATURE EFFECTS ON THE DAMAGE TOLERANCE OF IMPACT DAMAGED COMPOSITE SANDWICH PANELS R. Clifton Moody, James S. Harris, and Anthony J. Vizzini
665 EFFECTS OF POST-FAILURE MODELLING ON THE RESPONSE OF BALLISTICALLY IMPACTED COMPOSITES Jack van Hoof, Michael J. Worswick, Paul V. Straznicky, and Manon Bolduc
667 CMC DAMAGE PREDICTION BY MICRO-MACRO MODELING C. Rospars, E. Le Dantec, F. Lecuyer
668 ON MINIMISING THE OBTRUSIVITY OF AN OPTICAL FIBRE SENSOR WITH RESPECT TO MATRIX CRACKING E.N. Barton, S.L. Ogin, A.M.Thorne and G.T. Reed
669 A FLAT SHELL COMPOSITE ELEMENT INCLUDING PIEZOELECTRIC ACTUATORS José Antônio Hernandes and Rafael Takeda Melim
670 COMPOSITE BOUNDARY-EFFECTS COMPUTATIONAL MODELLING X. Aubard, L. Champaney, C. Cluzel,, L. Guitard, P. Ladevèze
671 A THREE-DIMENSIONAL FINITE ELEMENT DEFORMATION ANALYSIS OF PLAIN WEAVE WOVEN COMPOSITE SUBJECTED TO TENSILE LOAD S. Rangaraju and A. K. Roy
672 IDENTIFICATION OF GLASS FIBER DEFECT DENSITY USING MULTIFRAGMENTATION TEST Chris M. Boyer
674 COMPUTING UNCERTAINTIES IN A DELTA WING COMPOSITE STRUCTURE USING INTERVAL-BASED METHODS Franck Delcroix, Chris Boyer, Vincent Braibant
675 IMPROVEMENT OF UNIDIRECTIONAL COMPOSITE STRENGTH PROBABILISTIC MODEL Chris M. Boyer
679 AEROSPACE COMPOSITE LATTICE STRUCTURES Vyacheslav A. Barynin, Vladimir A. Bunakov, Alexandr F. Rasin,
681 RELIABILITY OF COMPOSITE STRUCTURES - IMPACT LOADING - L.Guillaumat
682 A SIMPLE MODEL FOR THE ANALYSIS OF LAMINATED COMPOSITES WITH AND WITHOUT DELAMINATION Andrew Makeev and Erian A. Armanios
684 FT-IR STUDIES ON IMIDIZATION AND END GROUP REACTION BEHAVIORS OF A PHENYLETHYNYL TERMINATED IMIDE OLIGOMER Donghwan Cho and Lawrence T. Drzal
685 THERMAL CHARACTERIZATION OF LARC( PETI-5 AS A POTENTIAL HIGH TEMPERATURE SIZING MATERIAL Donghwan Cho and Lawrence T. Drzal
686 ANALYSIS OF MOLD FILLING IN INJECTION-COMPRESSION Xuan-Tan Pham and François Trochu
688 INTERFACIAL DESIGN FOR DAMAGE TOLERANT FIBER COMPOSITES V. Damljanovic and N. R. Sottos
690 THE EFFECT OF TOOLING MATERIAL, CURE CYCLE, AND TOOL SURFACE FINISH ON SPRING-IN OF AUTOCLAVE PROCESSED CURVED COMPOSITE PARTS Göran Fernlund and Anoush Poursartip
691 A STUDY OF RESIN TRANSFER MOLDING PROCESS USING EXPERIMENTAL DESIGN METHOD X.R.Xiao, V.P.Astakhov, T.L.Su
692 C-130 HERCULES COMPOSITE FLAPS FATIGUE TEST PROGRAM J. Ayling
695 EFFECT OF BOUNDARY CONDITIONS ON THE BALLISTIC RESPONSE OF TEXTILE STRUCTURES Elvis Cepuš, Ali Shahkarami, Reza Vaziri, and Anoush Poursartip
697 MECHANICAL PROPERTIES AND INTERFACIAL CHARACTERIZATION OF NEXTEL 312(TM) FIBER/BN/BLACKGLAS(TM) COMPOSITES Richard L. Schalek, John Helmuth, and Lawrence T. Drzal#
698 GENERAL FORMS OF UNIVERSAL CONNECTIONS OF ELASTIC FIBROUS COMPOSITES T. CHEN and Q.-S. ZHENG
700 TWO LAYER COMPOSITE SHELL FOR ANCHORED REFRACTORY LINING COMPUTING C. Andrieux,, P. Boisse,, Y. Dutheillet, V. Gabis, A. Gasser,, J. Rousseau,
704 DESIGN OF SMART COMPOSITE LAMINATES AND THIN-WALLED BEAMS C. Kaiser, H. Baier
705 SYNTHESIS OF A (WSI2, W5SI3)-SIC COMPOSITE USING THE REACTION BETWEEN WC AND SI F. J. Narciso-Romero, P. Pujalte, R. Arpón, F. Coloma, A. Sepúlveda-Escribano, F. Rodríguez-Reinoso and M. Komatsu.
706 INFILTRATION AND REACTIVITY OF TIC PARTICULATE WITH LIQUID ALUMINIUM J. Narciso, R. Arpón, V. Ferrández, C. García-Cordovilla, and E. Louis
707 EFFECTS OF THE OXIDE LAYER ON PRESSURE INFILTRATION OF PACKED CERAMIC PARTICULATE BY ALUMINUM ALLOYS C. García-Cordovilla, J. Narciso, R. Arpón, V. Ferrández and E. Louis
708 SYNTHESIS OF A CERAMIC COMPOSITE MATERIAL: SIC-(W,MO)SI2 P.Pujalte, F.J.Narciso-Romero, R.Arpón, F.Coloma, A.Sepúlveda-Escribano, and F.Rodríguez-Reinoso.
710 IDENTIFICATION OF THE THROUGH-THICKNESS STIFFNESSES OF THICK LAMINATES BY INVERSE ANALYSIS Fabrice PIERRON, Sergei ZHAVORONOK, and Michel GREDIAC
711 VARIABLE AXIAL COMPOSITES FOR COMPLEXLY LOADED HIGH-SPEED ROTORS W. Hufenbach, G. Archodoulakis, R. Grothaus, L. Kroll, A. Langkamp
715 DEVELOPMENT AND CHARACTERISATION OF HIGH DAMPING MAGNESIUM BASED COMPOSITES Christine Mayencourt and Robert Schaller
717 DAMAGE MODELING AND CHARACTERIZATION OF A THREE-DIMENSIONAL WOVEN COMPOSITE Pascal Casari, Pierre Ladevèze and Tsu-Wei Chou
723 THERMOELASTIC PROPERTIES PREDICTION OF 3D TEXTILE COMPOSITES S. P. Yushanov, A. E. Bogdanovich, and M. H. Mohamed
724 THREE-DIMENSIONAL VARIATIONAL ANALYSIS OF IMPACT CONTACT DEFORMATION OF THICK COMPOSITE PLATES A. E. Bogdanovich and S. P. Yushanov
726 ELEVATED TEMPERATURE TREATMENT OF ARAMID FIBERS TO IMPROVE ADHESION Shigeru Ishihara and Lawrence T. Drzal
728 VARIATION IN COMPOSITE TENSILE PROPERTIES DUE TO BIAXIAL DEFORMATION OF KNITTED GLASS FABRICS K.H. Leong , O.A. Khondker and I. Herszberg
730 THE MODEL OF MODULUS DEGRADATION NEAR EDGES ZONES FOR COMPOSITE MATERIALS S.A. Lurie, A.R.Vvedensky, S.Yousefi
732 DESIGN OF MULTIAXIAL WARP KNITTED FABRICS FOR REQUIRED TENSILE PROPERTIES IN COMPOSITE APPLICATIONS Jinlian HU, Yaming JIANG and Frank K. Ko
733 FEASIBILITY STUDY OF INSULATOR, ADHESIVE, AND Y-JOINT STRUCTURE FOR THE CRYOGENIC PROPELLANT TANK OF REUSABLE LAUNCH VEHICLE Takayuki Shimoda, Yoshiki Morino
735 MESO-MACRO MECHENICAL BEHAVIOUR OF DRY FIBER FABRICS Karine Buet Gautier, Alain Gasser, Jean Launay, and Philippe Boisse,
736 BEHAVIOUR OF ALUMINA REFRACTORY COMPOSITES FOR TEMPERATURES BELOW 800°C. EXPERIMENT AND MODELLING J.F. Hernandez, N. Schmitt P. Meunier and J. Poirier
737 POLYMER NANOCOMPOSITES FOR LOAD-BEARING MRI-COMPATIBLE IMPLANTS Pierre-François Köver, Heiko Zerlik, Jörg Mayer, Karl-Ludwig Eckert and Erich Wintermantel
738 FATIGUE BEHAVIOUR OF UNIDIRECTIONALLY CONTINUOUS ALTEX-FIBRE REINFORCED ALUMINIUM-BASED COMPOSITES O. Beffort S. Long and M.Diener
739 CHEMICAL COMPATIBILITY BETWEEN ALUMINIUM BASE MATRICES AND LIGHT REFRACTORY CARBIDE REINFORCEMENTS J.C. Viala, M. Peronnet, F. Bosselet and J. Bouix
740 MONITORING ACOUSTIC EMISSION DURING TENSILE LOADING OF THERMOPLASTIC COMPOSITES MATERIALS Laksimi, S. Benmedakhene & L. Bounouas
743 THREE-DIMENSIONAL FINITE-ELEMENT ANALYSIS OF TRANSVERSE STRESSES IN SANDWICH PLATES A. ATE, S. AIVAZZADEH, G. VERCHERY
744 EFFECTS OF ETHANOL AND POLYELECTROLYTE ON THE PROCESSING OF SICW/AL2O3 COMPOSITES M. Zhang and M.J. Crimp
745 THE PRODUCTION OF HOLLOW CARBON FIBRE FROM A SPECIAL PAN PRECURSOR S.W.G.Travis, M.Bateson, J.B. Doble, R.E.Palmer, V. Paloumbi and P.T.Curtis
746 MODELING OF THE BEHAVIOR OF WOVEN LAMINATED COMPOSITES UNTIL RUPTURE Jean Paul Charles Christian Hochard, Pierre Antoine Aubourg,
748 A PROTOTYPE RESEARCH LABORATORY FOR AUTOMATED FABRICATION OF HIGH PERFORMANCE COMPOSITES N. J. Johnston, H. L. Belvin, R. J. Cano, J. M Marchello, and A. B. Hulcher
749 PHYSICAL AGING AND CREEP CHARACTERIZATION OF A CARBON/POLYIMIDE COMPOSITE I. M. Daniel, J. J. Luo, and Z. Sun
750 FACTORS CONTROLLING STRESS-RUPTURE OF FIBER-REINFORCED CERAMIC COMPOSITES J.A. DiCarlo and H.M. Yun
751 EFFECTS OF CRYSTALLIZATION ON MECHANICAL PROPERTIES OF CARBON FIBRE REINFORCED POLY(ETHER ETHER KETONE) COMPOSITES ARICI, A. Armagnan
752 PURE TENSION WITH OFF-AXIS TESTS FOR ORTHOTROPIC LAMINATES. G. Verchery, X.J Gong
754 COMPRESSIVE STRENGTH OF 3-D HEAT-RESISTANT COMPOSITES Ippei Susuki, Takeshi Takatoya, Yoshiharu Yasui, and Toshirou Kondo
755 THE PHASE COMPOSITION SPECIFIC SURFACE AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS R2O3- AL2O3 (R = Y, LA, OR CE). E. M. Moroz and A. S. Ivanova
756 FATIGUE MODEL FOR STEEL FIBER-REINFORCED CONCRETE Paulo B. Cachim, Joaquim A. Figueiras, and Paulo A.A. Pereira
757 MIXED MODE I AND II STRESS INTENSITY FACTORS FOR EDGE CRACKS IN ANISOTROPIC INFINITE STRIPS Haiying Huang and George A. Kardomateas
758 EFFECTS OF HIGH TEMPERATURE ARGON HEAT TREATMENT ON TENSILE STRENGTH AND MICROSTRUCTURE OF BN/SIC COATED SIC FIBER PREFORMS Ramakrishna T.Bhatt, and Yuan L Chen
759 STRAIN TRANSFER OF SHEET-BONDED FRP TO CONCRETE AND MASONRY Young-Joo Lee, Thomas E. Boothby, and Charles E. Bakis
760 EXPERIMENTAL MEASUREMENT AND NUMERICAL PREDICTION OF HAIL ICE IMPACT DAMAGE ON COMPOSITE PANELS Hyonny Kim and Keith T. Kedward
763 NUMERICAL MODELLING OF COMPOSITE PIN-JOINTS AND EXPERIMENTAL VALIDATION Fabrice PIERRON François CERISIER and Michel GRÉDIAC
764 TRANSIENT THERMOELASTIC STRESSES THROUGH THE THICKNESS OF AN ANISOTROPIC LAMINATED PIPE F. Jacquemin, A. Vautrin
767 SOLID-LIQUID PRESSURE BONDING FOR FABRICATING STEEL/ALUMINUM ALLOY LAMINATED COMPOSITE Y.W.Xun, M.J. Tan
768 PROCESSING AND CHARACTERIZATION OF SIC FIBER REINFORCED TI-15V-3CR MATRIX COMPOSITES Y.W. Xun, M.J. Tan
769 FRACTURE TOUGHNESS OF ADHESIVE BONDED COMPOSITE JOINTS UNDER MIXED MODE LOADING. X. J. Gong, F. Hernandez, G. Verchery
770 CHARACTERIZATION OF WOOD-POLYPROPYLENE COMPOSITE SANDWICH SYSTEM Ganesan Kumar, Karthik Ramani
771 PROCESSING AND PROPERTIES OF BIODEGRADABLE COMPOSITES BASED ON MATER-BI AND SISAL FIBER A.Vazquez, V.P.Cyras,J.M Kenny and S. Iannace
772 ADHESION OF CARBON FIBERS TO VINYL ESTER MATRICES Michael J. Rich, Shawn Corbin, and Lawrence T. Drzal
773 ANALYTIC DESCRIPTIONS OF 3-D PREFORMS USED IN COMPOSITE COMPONENT MANUFACTURING F. Coman , S. John, I. Herszberg.
774 ON THE MATURITY OF WORLD-WIDE FAILURE THEORIES: COMPARISON WITH EXPERIMENTS FOR GRP LAMINATES M J Hinton, P D Soden and A S Kaddour
775 FAILURE OF SOLID AND HOLLOW S2-GLASS FIBRE/EPOXY THICK TUBES UNDER BIAXIAL COMPRESSION A S Kaddour, P D Soden and M J Hinton
776 INVESTIGATION OF PROGRESSIVE AND ULTIMATE FAILURE FOR WOVEN-FABRIC COMPOSITE STRUCTURES L. Dong and J. Blachut
778 FIBER FRAGMENTATION BY TWIN-FIBER BENDING BEAM C. M. L. Wu, S. L. Bai, R. K. Y. Li, and Y. W. Mai
779 A CUBIC BOUNDARY ELEMENT FOR TWO-DIMENSIONAL COMPOSITE PLATES CONTAINING HOLES Chyanbin Hwu and T. L. Sun
781 STABLE AND UNSTABLE FATIGUE CRACK GROWTH IN TI MMCS Jun Liu and Paul Bowen
782 BRIDGING MECHANISMS IN FIBRE-REINFORCED TI MMCS Jun Liu and Paul Bowen
784 FIBER/MATRIX DEBONDING CRITERIONS IN SIC/TI COMPOSITE. NUMERICAL AND EXPERIMENTAL ANALYSIS A. Thionnet, J. Renard
785 MODELLING OF FATIGUE BEHAVIOUR IN COMPOSITE LAMINATES A. Thionnet, and J. Renard
786 DAMAGE IN PARTICULATE COMPOSITES WITH HARD PARTCILES EMBEDDED IN A SOFT MATRIX Young W. Kwon and C. T. Liu
787 NUMERICAL EVALUATION OF THE THERMAL FIELD IN SOLIDIFICATION OF COMPOSITES MATERIALS P. Nica, M. Agop, C. Nica, A. Agop, L. Toma, I. Toma
788 FATIGUE PROPAGATION OF A BRIDGED CRACK IN FIBRE-REINFORCED COMPOSITES P. Levasseur , P. Paulmier , J.F. Maire , and J.L. Chaboche
789 EFFECTS OF TEMPERATURE ON IMPACT FRACTURE BEHAVIOR OF PULTRUDED GLASS FIBER-REINFORCED POLY(VINYL ESTER) COMPOSITE F.Y. Tsang, J.Z. Liang, C.M.Tai, C.Y. Ching and R.K.Y. Li
790 DESIGN AND OPTIMISATION OF A NEW RTM COMPOSITE BICYCLE CRANK M. Quaresimin, G. Meneghetti, G. Ronda and F. Verardo
792 MULTI-AXIAL TESTING OF PLANAR COMPOSITE SPECIMENS P Hopgood, J Cook, A Clarke
793 DAMAGE PROGRESSION ANALYSIS IN 3-D WOVEN COMPOSITE COMPONENTS F. Coman, S. John and I. Herszberg
795 STRENGTHENING STRUCTURES USING UNSTRESSED AND PRESTRESSED CFRP PLATES Michael Leeming
796 ADAPTED PROGRESSIVE FAILURE CRITERION FOR MULTI-DIRECTIONAL GRP-LAMINATES G.M. Sluimer
798 MARKETING OF ADVANCED MATERIALS INTELLECTUAL PROPERTY Michael J. Martin
799 COMPOSITE STRUCTURES WITH BUILT-IN DIAGNOSTICS Fu-Kuo Chang
800 A HYBRID ELASTIC WAVE METHOD FOR MEASURING T.-T. Wu, and Y.-H. Liu
801 AUTOMATED CONSOLIDATION DURING THE MANUFACTURE OF COMPOSITE MATERIAL BASED COMPONENTS ELASTIC CONSTANTS OF FIBER REINFORCED COMPOSITE PLATE H D Do, L Ma, R Paton, S John and I Herszberg
802 FRICTIONAL BEHAVIOUR OF THE INTERFACE IN SIC MONOFILAMENT MODEL COMPOSITES WITH BOROSILICATE GLASS MATRIX H. Cherouali, N. Louet, P. Reynaud and D. Rouby
804 OPTIMUM DESIGN OF GRID CYLINDRICAL STRUCTURES USING HOMOGENISED MODEL D. Slinchenko, V. E. Verijenko, F. Léné, G. Duvaut.
805 ASYMPTOTIC APPROACH TO MICROMECHANICS OF COMPOSITE MATERIALS L. Manevitch, A. Pavlenko
809 ROUTINE THREE -DIMENSIONAL ANALYSIS OF WOVEN COMPOSITES John D. Whitcomb and Xiaodong Tang
811 ISOTHERMAL AND NON-ISOTHERMAL CONSOLIDATION OF UNIDIRECTIONAL CARBON FIBRE-THERMOPLASTIC TOWPREGS J. P. Nunes, A. M. Brito, A. S. Pouzada and C. A. Bernardo
812 CRACK OPENING DISPLACEMENT AS A BASIC PARAMETER FOR STIFFNESS REDUCTION MODELING IN LAMINATED COMPOSITES Janis Varna, Andrejs Krasnikovs and Ramesh Talreja
813 FLEXURAL BEHAVIOUR OF ANISOTROPIC COMPOSITE DISCS SUBJECTED TO THREE-POINT SUPPORT BENDING TESTS J. P. Nunes, A. S. Pouzada and C. A. Bernardo
814 OPTIMAL PIEZO-PATCH DESIGN OF COMPOSITE BEAMS UNDER UNCERTAIN LOADS FOR MINMAX DEFLECTION Ibrahim S. Sadek John C. Bruch Jr., James M. Sloss and Sarp Adali
815 THEORETICAL STUDIES ON STEADY-STATE FIBRE PULL-OUT X. Zhang, H.-Y. Liu and Y.-W. Mai
816 ISOTROPIC AND NEARLY ISOTROPIC FIBRE COMPOSITES A. KELLY and L. N. McCARTNEY
817 FREE EDGE DELAMINATION ONSET CRITERION G. MARION,, R. HARRY and F. LECUYER
818 DAMAGE EVOLUTION MODELING IN MULTIDIRECTIONAL LAMINATES AND THE RESULTING NONLINEAR RESPONSE R. Joffe and J. Varna
820 RESEARCH IN PROGRESS: FATIGUE OF CFRP COMPOSITES Cornelia E. Demers, Ph.D., Amir Abdelgadir
822 MECHANISMS AND MODELS FOR DELAMINATION IN THE PRESENCE OF THROUGH-THICKNESS REINFORCEMENT Brian N. Cox
824 DESIGNING COMPOSITES FOR ENERGY ABSORPTION UNDER TENSILE LOADING B. N. Cox, J. B. Davis, N. Sridhar, F. W. Zok, and X.-Y. Gong
825 COMPUTATIONAL MODEL OF SOFT COMPOSITE MATERIALS FOR ARTIFICIAL LIGAMENT ANALYSIS Pasquale Vena and Roberto Contro
827 THE BINARY MODEL - A COMPUTATIONAL APPROACH TO TEXTILE COMPOSITES B. N. Cox, R. M. McMeeking, and M. A. McGlockton
831 ORIENTATION PROCESS DURING EXTRUSION OF REACTIVE POWDER CONCRETE REINFORCED WITH SHORT METAL FIBERS Arnaud POITOU, Francisco CHINESTA, Gérard BERNIER
840 COMPUTER-AIDED LAMINATE SELECTION USING A GRAPHICAL METHOD P.M.Weaver
841 FORMABILITY OF WEFT KNITTED PREFORMS S. Savci, J.I. Curiskis, and M.T. Pailthorpe
842 DYNAMICAL MODELLING OF THE CHAIN STRUCTURE FORMATION IN ELECTRORHEOLOGICAL FLUIDS BIAO WANG, YULAN LIU and ZHONGMIN XIAO
843 EVALUATION OF BONDING STRENGHT BETWEEN SIC-COATING AND C/C COMPOSITE Yasuo KOGO Yoshifumi NAKAYAMA Hiroshi HATTA and Ken GOTO
846 MOULDING ANALYSIS OF 3D WOVEN COMPOSITE PREFORMS: MAPPING ALGORITHMS Shrikant B. Sharma, Prasad Potluri, Issac Porat
847 A FINITE ELEMENT MODEL FOR SIZE EFFECT AND HETEROGENEITY IN CONCRETE STRUCTURES Roque Luiz Pitangueira and Raul Rosas e Silva
850 MEASUREMENT OF THE LOCAL FIBRE STRAIN DISTRIBUTIONS IN WOVEN COMPOSITES S.Y. Lei and R.J.Young
851 BRIDGED DELAMINATION CRACKS IN CURVED BEAMS AND MIXED-MODE BENDING SPECIMENS Roberta Massabò and Brian N. Cox
852 NEAR NET SHAPE MANUFACTURE OF CMC COMPONENTS W. Krenkel, N. Lützenburger
853 USE OF SENSORS AND SIMULATIONS TO MOVE TOWARDS AUTOMATION OF THE RESIN TRANSFER MOLDING PROCESS Suresh G. Advani, E. Murat Sozer, Simon Bickerton, Hubert C. Stadtfeld, and Karl V. Steiner
854 COST VERSUS RELIABILITY IN REINFORCED HSC COLUMN DESIGN Sofia M. C. Diniz
855 COMPLEX PERMITTIVITY OF LOW LOSS THERMOPLASTIC COMPOSITES USING A RESONANT CAVITY METHOD H S Ku J A R Ball E Siores and P Chan
857 THE FORMATION OF SOLID SOLUTION BAND AT THE SURFACE OF TI(CN)-BASED CERMETS Y. J. Park, S. W. Kim, and S. Kang
858 PROCESSING OF COMPOSITE MATERIAL USING INDUSTRIAL WASTE ALUMINUM SLUDGE Isao FUKUMOTO and Shunei MEKARU
859 CURING STRESSES IN THICK POLYMER COMPOSITE COMPONENTS PART I: ANALYSIS M. R. Wisnom, L. G. Stringer, R. J. Hayman, and M. J. Hinton
861 CURING STRESSES IN THICK POLYMER COMPOSITE COMPONENTS PART II : MANAGEMENT OF RESIDUAL STRESSES L. G. Stringer, R. J. Hayman, M. J. Hinton, R.A.Badcock, and M. R. Wisnom
862 RELATIONSHIP BETWEEN PROBABILISTIC AND CONTINUUM DESCRIPTIONS OF THE MECHANICAL BEHAVIOR OF BRITTLE-MATRIX COMPOSITES François Hild
863 RHEOLOGICAL AND MORPHOLOGICAL INFLUENCES ON THE VISCOELASTIC BEHAVIOUR OF POLYMER COMPOSITES R. Gaertner and , C. Gauthier, P. Franciosi, A. Khavandi and M. Shaterzadeh
864 DESIGN AND TESTING OF IN-SITU CONSOLIDATED THICK HIGH PERFORMANCE THERMOPLASTICS George F. Leon, Jeffrey Hall, James J. Kelly, Raymond Bohlmann
865 ANALYSIS OF THE COMPACTION CYCLE IN THE VACUUM INFUSION MOLDING PROCESS A. Hammami, B.R.Gebart and P. Nilsson
866 OPTIMAL DESIGN OF COMPOSITE THIN-WALLED LAMINATED BEAM BY RANKING ZHANG ZHEN-YING
869 LOW ENERGY IMPACT BEHAVIORS OF NONSTITCHED AND STITCHED FOAM CORED SANDWICH STRUCTURES Sung-Ho Yoon, Ki-Jong Jang, Sae-Hyun Cho, Byung-Jun Park, and Jung-Mi Cho
871 OPTIMAL DESIGN OF VISCOELASTIC COMPOSITES WITH PERIODIC MICROSTRUCTURES Yeong-Moo Yi, Sang-Hoon Park, and Sung-Kie Youn
872 STRAIN RATE EFFECTS ON THE STRENGTH OF SOME GLASS-FIBRE REINFORCED POLYMER COMPOSITES M.Z. Shah Khan, M. Taylor, C.R. Townsend and I. Grabovac
873 APPLICATIONS OF COMPOSITES IN REPAIR REINFORCED CONCRETE SUBASSEMBLIES Ayman S. Mosallam, Ph.D., P.E.
876 SIMULATION OF THE COMPRESSION MOLDING OF UNIDIRECTIONAL COMPOSITE LEAF SPRINGS B. Gardarein, P. Durand, P. Lory
877 INFILTRATION OF FIBROUS PREFORM BY A LIQUID METAL : MODELIZATION OF THE PREFORM DEFORMATION M. Danis, C. Del Borrello, E. Lacoste, O. Mantaux
878 CARBON FIBRE SHEAR STRENGTHENING OF REINFORCED CONCRETE BEAMS Bryan Adey, and Eugene Brühwiler
880 MECHANICAL BEHAVIOUR OF PRESSURE-NFILTRATED CERAMIC PARTICLE REINFORCED ALUMINIUM M. Kouzeli , L. Weber , C. San Marchi and A. Mortensen
881 MECHANICAL BEHAVIOR OF AN ALUMINA FIBER REINFORCED ALUMINUM WIRE IN TENSION AND AFTER AXIAL TORSION L.Weber, P. Canalis-Nieto, and A. Mortensen
882 NEW METHODOLOGY TO STUDY THE BEHAVIOUR OF DELAMINATED COMPOSITE STRUCTURES J.C. Walrick, D. Coutellier, P. Geoffroy, D. Dormegnie
883 ON TRANSVERSE FRACTURE MECHANISMS OF 1140+/TI-6AL-4V AND SCS-6/TI ß21S COMPOSITES UNDER TENSILE LOADING X. Wu, H.Mori and P. Bowen
884 ANALYTICAL AND COMPUTATIONAL SIMULATIONS OF EXPERIMENTAL DETERMINATIONS OF LINEAR VISCOELASTIC CONSTITUTIVE RELATIONS 1 Cristina E. Beldica and Harry H. Hilton
886 IMPROVED MAGNETIZATION OF 3Y-ZRO2/ BA-HEXAFERRITE COMPOSITE BY POST-PLASTIC DEFORMATION Yoshikazu Suzuki, Masanobu Awano, Naoki Kondo and Tatsuki Ohji
887 DAMAGE MONITORING IN CFRP LAMINATES BY MEANS OF DIELECTRICAL PROPERTIES J.C Abry, A. Chateauminois, G. Giraud, C. Henaff-Gardin, M.C. Lafarie-Frénot and M. Salvia
888 EFFECTS OF FIBRE SIZING ON DAMAGE DEVELOPMENT IN UNIDIRECTIONAL GLASS/EPOXY COMPOSITES M. Kharrat , T. Monlèon, L. Carpentier A. Chateauminois and M.L. Maspoch
889 HIGH TEMPERATURE DEFORMATION BEHAVIOR OF NANOCRYSTALLINE SIC/C COMPOSITE Yutaka Shinoda, Hui Gu and Fumihiro Wakai
890 DAMAGE MODELLING OF A SATIN SEPCARB® COMPOSITE X. Aubard, C. Cluzel, P. Ladevèze and J.N. Périé
891 FLUIDITY AND CASTABILITY STUDIES ON AL-SICP COMPOSITES U.T.S. PILLAI, J. DUSZCZYK AND L. KATGERMAN
892 INVESTIGATION OF THE STRUCTURAL DAMPING OF THE FULL-SCALE HELICOPTER MAIN ROTOR BLADE MADE OF COMPOSITE LAMINATED MATERIALS Bosko Rasuo
895 MICROWAVE ASSISTED RESIN TRANSFER MOULDING OF POLYESTER/ARAMID COMPOSITES Abdul Razak Rahmat and Richard.J.Day
896 FABRICATION AND WEAR BEHAVIOUR OF AN ALUMINIUM MATRIX COMPOSITE REINFORCED WITH A HIGH CONTENT OF SILICON CARBIDE PARTICLES R. Fernández, Y.Lepetitcorps, L.Albingre, J.Coleto and J.Goñi
898 INVESTIGATION OF THE MICROWAVE CURING OF AN EPOXY RESIN SYSTEM Mark Wallace, David Attwood, Richard J. Day, and Frank Heatley
899 THE WEIBULL MODULI OF SI-ZR-C-O FIBER WITH DIAMETER VARIATION ALONG THE GAUGE LENGTH. T. Morimoto, R. M. Aoki
900 SUBSTRUCTURE METHOD FOR AN ASSEMBLY OF STRUCTURES INVARIANT IN ONE DIRECTION S. MEO, O. DEBORDES, A. BOUKAMEL
901 IMPACT OF PLY DROPS K. C. Kairouz and J. Ball
904 APPLICATION OF X-RAY MICROTOMOGRAPHY TO THE STUDY OF POLYMER COMPOSITES R. Pyrz
905 NON ISOTHERMAL SIMULATION OF THE RESIN TRANSFER MOLDING PROCESS V. Antonucci, S. Sarlo, M. Giordano, G. Di Vita and L. Nicolais
906 CURE DEPENDENT CREEP COMPLIANCE OF AN EPOXY RESIN Daniel J. O'Brien and Scott R. White
907 - SEMIFLEXIBLE COMPOSITES - DESIGN OF AN ENDLESS C717 WARP-KNITTED REINFORCED THERMOPLASTIC ELASTOMER C.-A. Keun, and K. Schulte
909 APPLICATION OF A DAMAGE MODEL FOR HIGH RATE DEFORMATION OF COMPOSITE STRUCTURES H. Eskandari and J. A. Nemes
910 INTERFACES IN FLAX FIBRE-POLYMER COMPOSITES Artemis Stamboulis, Caroline Baillie, Maria Piacesi, E. Schulz
912 MEASURING BOLTED JOINT BEARING DEFORMATION AND STIFFNESS B. Vangrimde, R.Boukhili
913 BOLTED JOINT FRACTURE MODES IN GLASS-FIBRE REINFORCED POLYESTER B. Vangrimde and R. Boukhili
915 MODELLING AND EXPERIMENTAL INVESTIGATION OF THE BALLISTIC BEHAVIOUR OF AN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE)/THERMOPLASTIC RUBBER MATRIX COMPOSITE Nikhil Sharma, Debbie Carr Pippa Kelly Christopher Viney
916 THE USE OF COMPOSITES IN SEISMIC RETROFITTING OF MASONRY WALLS John C. Jai, Rita M. Kiss, László P. Kollár, Helmut Krawinkler, and George S. Springer
917 STRENGTHENING AND STRAIN SENSING TECHNIQUES IN RECTANGULAR CONCRETE BEAM USING FIBREGLASS COMPOSITES AND FIBRE BRAGG GRATING SENSORS K. T. Lau, L. M. Zhou, L. Ye and M. Diao
925 MMCS CHARACTERISATION BY INTERNAL FRICTION MEASUREMENT Irina SEVERIN, Michelle SALVIA, Gheorghe ZGURA
926 EXPERIMENTAL APPROACH AND MODELLING OF CFRP LAMINATES CREEP T. Risson, O. Ceysson, and M. Salvia
927 COMPOSITE RISERS FOR OFFSHORE TECHNOLOGY Yu. M. Tarnopol'skii, A. I. Beyle, and V. L. Kulakov
930 EXPERIMENTAL INVESTIGATION OF VIBRATION BEHAVIOR OF PATCHED COMPOSITE PLATES Wei-Chung Wang and Chien-Hua Chen
932 EXPERIMENTAL AND NUMERICAL DETERMINATION OF STRESS INTENSITY FACTOR IN COMPOSITE MATERIALS D. Cerniglia, V. Nigrelli, and A. Pasta
936 STATIC ENERGY ABSORPTION CAPACITY OF GRAPHITE-EPOXY TUBES Michael W. Hyer and Marc R. Schultz
939 THE SMOOTH INDENTATION OF A CYLINDRICAL INDENTOR AND ANGLE-PLY LAMINATES W. C. Liao
940 CREEP DESIGN USING FIBER CONTENTS ON FRTP Somiya S., Biswas K. K., Iwamoto N., Igarashi K. and Kawakami T.
941 COMPOSITE MATERIALS OF ALUMINIUM/GRANULATED SLAG AND ALUMINIUM/ARC-FURNACE DUST PREPARED BY POWDER METALLURGY TECHNIQUES A. Torres, J. Miranda, J. García, L. Narváez, R. Hernández and O. Domínguez
942 DEVELOPMENT OF A COMPOSITE GRINDING STONE FOR AN USE OF ULTRA PRECISION PROCESSING OF GLASS Y. Tomita, H. Eda , J. Shimizu and M.Jo
944 IMPACT DAMAGE AND RESIDUAL STRENGTH OF MUTIAXIAL WARP KNITTED GLASS FABRIC REINFORCED POLYESTER LAMINATE Tien-Wei Shyr, Chung Ouyang, and Yu-Hao Pan
952 FABRICATION AND CHARACTERIZATION OF 3D CARBON-FIBER/SIC COMPOSITES BY SLURRY - PULSE CVI JOINT PROCESS K. Suzuki, K. Nakano and T.W. Chou
953 FRACTURE TOUGHNESS OF IN SITU SYNTHESISED TINP-ALNP/AL COMPOSITE Chunxiang CUI Yutian Shen Fanbin Meng Renjie WU
960 TEMPERATURE EFFECT ON THE DAMAGE DEVELOPMENT OF A CFRP LAMINATE UNDER CYCLIC LOADING. KHEMIRI Nizar, MICHEL Laurent, and RAMAHEFARISON Epiphane.
967 PROPERTIES OF EPOXY RESIN TREATED BY STRONG MAGNETIC FIELD Juris Rodins and Vadim Korkhov
968 PECULIARITIES OF THERMAL MEASUREMENTS UNDER QUASI-ADIABATIC LOADING OF ARAMID - PLASTIC SHELLS M. Kamensky, V. Pudnik
969 FACTORS AFFECTING THE FIBRE STRENGTH DISTRIBUTION DURING THE FATIGUE LIFE OF TIMMCS S. Zamperini, P. McDonnell, H. Mori, and P. Bowen
971 MICROMECHANICAL MODELLING OF TI MMCS SUBJECTED TO TRANSVERSE TENSILE LOADING W. Ding and P. Bowen
972 EFFECTS OF SPECIMEN ORIENTATION ON THE FATIGUE CRACK GROWTH RESISTANCE OF CROSS-PLY TI-6AL-4V/SCS-6 METAL-MATRIX COMPOSITES A. Yasmin, T. J. A. Doel and P. Bowen
975 ELECTRIC RESISTANCE AND ACOUSTIC EMISSION DURING CYCLIC TENSILE LOADING OF CFRP LAMINATES T. Prasse, F. Michel, G. Mook, K. Schulte, W. Bauhofer
976 INFLUENCE OF SPECIMEN PREPARATION AND SPECIMEN SIZE ON THE TRANSVERSE TENSILE STRENGTH AND SCATTER OF GLASS EPOXY LAMINATES T. Kevin O'Brien, Arun D. Chawan, and Kevin DeMarco
978 DAMAGE PROGRESSION AND RESIDUAL TENSION STRENGTH STUDY OF FATIGUED OPEN-HOLE TITANIUM-GRAPHITE HYBRID COMPOSITE LAMINATES W. Steven Johnson and William B. Bright
979 INFLUENCE OF VARIOUS DEFECTS ON THE QUALITY AND THE DURABILITY OF COMPOSITE PIPES Philippe Castaing, Alain Dessarthe, Alain Lemasçon, Didier LeYhuélic, Hubert Mallard
980 THE DESIGN, MANUFACTURE AND TEST OF A TAPERED COMPOSITE I-BEAM Graham F.J. Hill, Michael R. Wisnom, Mike Jones
981 MANUFACTURING TECHNOLOGY OF WOUND STRUCTURES BY TRANSFORMATION OF WOUND PREFORMS Abel S. Cherevatsky
982 MECHANICAL PROPERTIES OF GLASS FIBRE-PET COMPOSITES BASED ON WEFT KNITTED PREFORMS G. Bogoeva-Gaceva, G. Demboski, I. Lacik
983 RESPONSE OF SEGMENTED-STIFFNESS COMPOSITE CYLINDERS Michael W. Hyer and Jaret C. Riddick
990 DYNAMIC COMPRESSIVE STRENGTH AND FAILURE OF CARBON FIBER REINFORCED ALUMINIUM METAL MATRIX COMPOSITE Woei-Shyan Lee and Wu-Chung Sue
991 THE EFFECT OF DELAMINATION GEOMETRY ON THE BUCKLING AND FAILURE OF GFRP PLATES G.J. Short[TC], F.J. Guild and M.J. Pavier
992 ASSESSMENT OF ELECTRON BEAM AND X-RAY CURE ADHESIVES FOR COMPOSITE REPAIR Tamunoiyala S. Koko, Mirko Zgela, and Kenneth D. MacKay
993 DAMAGE DETECTION OF CFRP LAMINATED BY USING LOCALIZED FLEXIBILITY METHOD O-IL Byon, Yoshio Aoki, Tatsuya Yamaguchi, K. C. Park and Greg W. Reigh
994 CHEMICAL PLATING OF CHOPPED SIC FIBER Cheng Haifeng, Chen Zhaohui, Li Yongqing, and Zhang Changrui
996 NUMERICAL ANALYSIS OF MICRO-MACRO COUPLED BEHAVIORS FOR FIBROUS COMPOSITES UNDER LARGE DEFORMATION Yoshihiro Ohnishi, Naoki Takano, and Masaru Zako
1000 PREPARATION AND CHARACTERIAZTION OF METAL/SIO2 NANOCOMPOSITE AEROGELS Chen Yimin, Xie Kai , Pan Yi , Xu Jin, Zao Xun
1004 PREPARATION OF ALUMINA MATRIX FOR CERAMIC COMPOSITES BY SOL-GEL METHOD Jiayu Xiao, Zhengfang Xie, Zhaohui Chen, Xingye Wang, Wenwei Zheng, and Junzhi Liu
1005 DESIGN OF LARGE COMPOSITE STRUCTURES UNDER DYNAMIC LOADS WITH FATIGUE ASSESSMENT José Sancho Rodríguez
1008 COPPER-PHOSPHATE BONDED HIGH STRENGTH FIBER COMPOSITE MATERIAL Yue Zhuo, Xicong Liu, Cao Pan and Deming Yang
1012 CATALYTIC OXIDATION OF CO ON THE SILICA AEROGELSCONTAINING NANOCLUSTERS OF METALS Xu Jing Xie Kai Chen Yiming Pan Yi
1013 REPARABILITY AND RESIDUAL MECHANICAL BEHAVIOUR OF PULTRUDED PROFILES J. Pasquiet, T.J. Chotard, M.L. Benzeggagh P. Matthieu
1014 SYNTHESIS AND CHARACTERIZATION OF NOVEL SILAZANE PRECURSORS Haifeng Hu, Zhaohui Chen, Wenwei Zheng, and Jiayu Xiao
1016 DETERMINATION OF STIFFNESS REDUCTION AND DAMAGE ACCUMULATION MONITORING IN COMPOSITE MATERIALS USING ULTRASONIC TECHNIQUES Ph. Margueres, F. Meraghni and M.L. Benzeggagh
1017 MOLECULAR DESIGN OF PRECURSORS AND APPLICATION IN CMCS PREPARATION Zhaohui Chen, Haifeng Hu, Wenwei Zheng, and Jiayu Xiao
1018 THE FULL CONTROLLED DEFORMATIONS OF ACTIVE COMPOSITE PLATES AND SHELLS WITH SHAPE MEMORY ALLOYS Lurie S.A., Kroplin B., Dinkler D.
1024 THE MODELING OG UNI-DIRECTIONAL COMPOSITES INTERPHASE STRUCTURE AND PROPERTIES Olga Y. Buryan, Victor U. Novikov, and Igor A. Todoshchenko
1027 USE OF A LINEAR VISCOELASTIC CONSTITUTIVE LAW TO MODEL THE TIME DEPENDENT BEHAVIOUR OF ORTHOTROPIC GLASSFIBRE REINFORCED PLASTIC Roland. M. Hinterhoelzl, Guenther Schullerer, Kurt Moser
1028 ANALYSIS OF EXPLANTED SILICONE/SILICA COMPOSITE BREAST IMPLANTS Harold J. Brandon,, V. L. Young , K.L. Jerina and C.J. Wolf
1029 MECHANICAL STRENGTH MODELING OF HIGH TEMPERATURE SIC DISCONTINUOUSLY REINFORCED HEAT TREATED ALUMINUM ALLOYS James M. Fragomeni
1030 STANDARDISED PROCEDURES FOR ULTRASONIC INSPECTION OF POLYMER MATRIX COMPOSITES W.R. Broughton, M.J. Lodeiro, G.D. Sims, B. Zeqiri, M. Hodnett, R.A. Smith and L. D. Jones
1031 A CONTAINER DESIGN FOR A THERMALLY INDUCED DECONFINEMENT OF ENERGETIC MATTER F.X. Kromm, T. Lorriot, R. Harry, J.M. Quenisset, and S. Alexandre
1032 IMPACT RESISTANCE AND TOLERANCE OF INTERLEAVED RTM LAMINATES Andre Duarte , Israel Herszberg and Rowan Paton and Sir Lawrence Wackett
1033 SCALE AND SIZE EFFECTS IN THE MECHANICAL CHARACTERIZATION OF COMPOSITE AND SANDWICH MATERIALS Peter Davies
1034 MODELING APPROACH OF MICROBUCKLING MECHANISM DURING CURE IN A CARBON EPOXY LAMINATE Ch. Jochum, J-C. Grandidier and M. Potier-Ferry
1035 THE RELATIONSHIP BETWEEN FIBRE ARCHITECTURE AND CRACKING DAMAGE IN A KNITTED FABRIC REINFORCED COMPOSITE C.R. Rios, S.L. Ogin,, C. Lekakou and K.H. Leong
1036 INTERFACE ADHESION IN COMPOSITES. CORRELATION BETWEEN IGC MEASUREMENTS AND MECHANICAL TESTING RESULTS. S. Santa, M.C. Gutiérrez, J. Rubio
1037 POLYPROPYLENE REINFORCED WITH GLASS BEADS. PREDICTION OF INTERFACE ADHESION BY IGC. O. Rodriguez , V. Morales, M.C. Gutierrez, J. Rubio
1038 INTERFACE PREDICTION: INVERSE GAS CHROMATOGRAPHY (IGC) AND ITS POTENTIAL APPLICATION TO FIBRE-MATRIX ADHESION PROBLEMS F. Rubio, M. C. Gutierrez, J. Rubio, J. L. Oteo
1039 PREPARATION OF SIC ABSORBENT BY PYROLYZING POLYCARBOSILANE MIXED WITH NANO-CO (NI) POWDER Cheng Haifeng, Chen Zhaohui, Li Yongqing, and Zhang Changrui
1040 ELECTROMAGNETIC PROPERTIES OF COMPOSITE FINE POWDER SYNTHESIZED BY POLYCARBONSILANE PRECURSOR/ MAGNETIC POWDER RenChao Che YongQing Li ZhaoHui Chen HongJi Lin
1041 A MODEL SIC-BASED FIBRE WITH A LOW OXYGEN CONTENT PREPARED FROM A VINYL-CONTAINING POLYCARBOSILANE PRECURSOR Zengyong Chu, Yongcai Song, Yunshu Xu and Yibei Fu
1042 YACHT PREPARED FROM BAMBOO WOVEN PREFORM REINFORCED POLYESTER VIA RTM Jingcheng Zeng , Jiayu Xiao , Chongyun Liang, Chunqi Wang, Xingye Wang, Fengrong Liu, Wei Sun
1043 NUMERICAL SIMULATION OF FLOW PHENOMENA IN COMPOSITE MANUFACTURING PROCESSES X.L. Liu
1044 PARAMETRIZATION OF STRUCTURE MATERIALS WITH OF APPLICATION THE FORMALISM OF MULTIFRACTALS V.U.Novikov, D.V.Kozitskii, V.S.Ivanova
1047 BUILDING A COMPOSITES INFRASTRUCTURE Graham D Sims
1048 VALIDATION OF CODA SOFTWARE FOR COMPOSITES SYNTHESIS AND PRELIMINARY DESIGN Graham D Sims and William R Broughton
1051 ALBERO POLYMERIC MORTAR AND ITS POSSIBILITIES IN BUILDING CONSTRUCTION Olivares Santiago M. , Laffarga Osteret J., Galán Marín C. and López Martínez J.A.
1052 THE AGAVE FIBERS IN COMPOSITE MATERIALS Ridha BEN CHEIKH, Sami BEN BRAHIM, Mohamed BAKLOUTI, Béchir HADJ SASSI
1053 CAST IRON: A NATURAL METAL MATRIX COMPOSITE C.A. Cooper , R.J. Young and R. Elliott
1055 ACID STRESS CORROSION OF E AND C GLASS HYBRID COMPOSITES Machiko MAEDA, Hiroyuki HAMADA, Yoshimichi FUJII
1056 THE IMPORTANCE OF FAILURE MODE IDENTIFICATION IN ADHESIVE BONDED AIRCRAFT STRUCTURES AND REPAIRS M.J. Davis and D.A. Bond
1057 HARD AND SOFT MAGNETIC COMPOSITES IN HIGH SPEED FLYWHEELS P.E. Mason, K. Atallah, D. Howe
1058 MECHANISM OF THERMAL SPIKING-ENHANCED MOISTURE ABSORPTION BY CYANATE ESTER CURED EPOXY RESIN MATRICES Sunil K. Karad and Frank R. Jones
1061 DISCUSSION ON THE FAILURE MECHANISM OF RC BEAMS STRENTHENED IN SHEAR BY EXTERNALLY BONDED CFRP SHEETS A. Li, T. Assih, and Y. Delmas
1062 DESIGN OF SANDWICH STRUCTURES WITH CURVATURE Vincent Manet, Woo-Suck Han and Alain Vautrin
1063 INVESTIGATION OF THERMAL PROPERTIES OF CARBON FIBRE COMPOSITE WITH PHENOLIC - EPOXY Varghese S., Prakash Yadav & S.K.Nema
1064 PHYSICO - MECHANICAL CHARACTERISATION OF JUTE FIBRE COMPOSITES WITH THERMOSET RESIN Prakash Yadav, Ajay K. Nema, Anurag Nema & S.K.Nema
1067 SIMULATION OF NONISOTHERMAL LOW PRESSURE INFILTRATION PROCESSING T. Dopler ,V.Michaud and A.Modaressi
1072 AGE-HARDENING OF AN ALUMINIUM ALLOY MATRIX COMPOSITE REINFORCED WITH STAINLESS STEEL FIBRES C. Salmon, F.X. Gustin, C.Colin, F.Delannay
1075 TENSILE DAMAGE IN QUATERNARY MELAMINE-FORMALDEHYDE COMPOSITES P.-O. Hagstrand, and P. Acuna
1076 TRANSIENT RESPONSE OF SANDWICH AND LAMINATED COMPOSITES WITH DAMPING UNDER IMPULSE LOADING Evgeny Barkanov, Andris Chate and Rolands Rikards
1078 TENSION, COMPRESSION AND FLEXURE PROPERTIES OF PULTRUDED COMPOSITES R. Prabhakaran and M. Saha
1080 MICROMECHANICAL MODELING OF CROSS-PLY TITANIUM MATRIX COMPOSITES REINFORCED WITH SILICON-CARBIDE FIBRES Z. Xia, F. Ellyin and Y. Chen
1081 CREEP BEHAVIOUR OF KEVLAR 49 INOKUCHI MATHEMATIC ANALYSE S. KACI, Z. TOUTOU, P. MORLIER
1087 MODEL OF GROWTH A IRREGULAR EUTECTICS COMPOSITE IN SITU (MMCS) Edward Guzik
1092 HOMOGENIZATION METHOD TO PREDICT THREE-DIMENSIONAL PERMEABILITIES CONSIDERING MICRO-MACRO AND SOLID-FLUID INTERACTIONS Naoki Takano, Masaru Zako, Tomomi Yoshioka, and Kenjiro Terada
1093 TOWARD AN ACCURATE FAILURE CRITERION OF ANISOTROPIC MATERIALS, A NEW FLEXURE TEST CONSIDERING THE COUPLING EFFECT Raed Rachdan, Masaru Zako, Naoki Takano, and Daisuke Nishida
1094 ADVANCED TEXTILE COMPOSITE EXTERNAL FIXATOR RING Krishna P Baidya, Seeram Ramakrishna, A. Ritchie, M.Rahman
1095 THE TSS - 1-R, THE NASA SPACE FLIGHT TETHERED SATELLITE - THE ODESSEY OF THE TETHER FABRICATION, FLIGHT AND POST-MORTEM E. Pete Scala
1098 IDENTIFICATION OF THE DAMAGE AND FAILURE MECHANISMS OF A 3D CARBON-CARBON COMPOSITE UNDER UNIAXIAL LOADING C. Crestia, S. Calloch, A. Cosculluela, F. Hild and D. Marquis
1099 FIBER OPTIC SENSORS FOR STRAIN MONITORING IN CONCRETE BEAMS REPAIRED WITH COMPOSITE MATERIALS Diaz-Carrillo, S., Salaverria, J., Casas, J.R., Guemes, J.A.
1100 SMART SENSORS FOR RESIN FLOW AND COMPOSITE CURE MONITORING Rodriguez-Lence F., Munoz-Esquer P., Menendez J.M, Pardo de Vera C., Diaz S.,Guemes, J.A.
1102 MODELING THE FIBER SLIPPAGE DURING PREFORMING OF WOVEN FABRICS Chyi-Lang Lai and Wen-Bin Young
1106 IN-SITU ULTRASONIC IMAGING OF CF/PEEK DURING DELAMINATION CLOSURE AT ELEVATED TEMPERATURE C. Miyasaka, B. R. Tittmann, and F. Costanzo
1111 EFFECTS OF STACKING SEQUENCE ON THE TRANSVERSE CRACKING IN QUASI-ISOTROPIC INTERLEAVED CFRP LAMINATES Satoshi Kobayashi , Nobuo Takeda , Shinji Ogihara and Akira Kobayashi
1112 EFFECTS OF FIBER SURFACE TREATMENT ON THE FIBER BREAK BEHAVIOR IN SINGLE FIBER COMPOSITE Shinji Ogihara, Nobuo Takeda, F.M.Zhao, Youichi Kimura and Akira Kobayashi
1113 MATRIX STRAIN FIELD MAPPING AROUND EMBEDDED FIBRES USING POLARISED RAMAN MICROSCOPY A.S.Nielsen, J.Schjdt Thoinsen and R.Pyrz
1115 NATURAL COMPOSITES BASED ON CELLULOSIC FIBRES AND POLYPROPYLENE MATRIX - THEIR PROCESSING AND CHARACTERISATION H. Lilholt, H. Toftegaard, A.B. Thomsen, and A.S. Schmidt
1117 DESIGN OF BEAM STRUCTURES WITH BRAIDED COMPOSITE TUBES Hiroyuki HAMADA, Yukiko AZUMI, Tsuyoshi NISHIWAKI, Akio TANGE, Asami NAKAI and Nobuo TAKEDA
1118 MECHANICAL BEHAVIOR OF A 2D SIC/SIC COMPOSITE WITH A MULTILAYERED MATRIX P. Forio, J. Lamon
1119 EFFECT OF PEK CONTENT ON FRACTURE TOUGHNESS OF GLASS WOVEN FABRIC / PHENOLIC RESIN COMPOSITES Y.Q. Sun,, J.H. Li, J.B. Wang, S.R. Zheng and M.L. Sun
1122 FABRICATION AND MECHANICAL PROPERTIES OF PE/PE COMPOSITE Miyako Inoda, Tatsuro Fukui, Kazutosi Fujihara, Masaharu Iwamoto, Hiroyuki Hamada
1123 IMPROVEMENT OF RESIN IMPREGNATION INTO GLASS CLOTH BY SILANE TREATMENT IN RESIN TRANSFER MOLDING Nobuo Ikuta, Tohru Morii, Seiwa Ohori, Minoru Yasueda
1124 LEAD GLASS FIBRE MADE FROM ELECTRONIC WASTE I. Kravtchenko, V. Gorobinskay, J. Bossert, K. Schindler, G. Hüdepohl
1129 CHARACTERIZATION AND DAMAGE EVOLUTION OF S.M.C COMPOSITES MATERIALS BY ULTRASONIC METHOD M. SAYARI, D.BAPTISTE, M. BOCQUET AND J.FITOUSSI
1130 ENHANCED FATIGUE RESISTANCE IN CARBON/EPOXY LAMINATES BY USE OF INTERLEAF LAYERS Toshio Tanimoto
1132 SPATIAL BRAIDING OF CYLINDRICAL SHAPE ARTICLES A. I. Beyle, V. L. Kulakov, D. D. Mungalov, Yu. M. Tarnopol'skii
1135 EVALUATION OF THE COEFFICIENTS OF MOISTURE EXPANSION USING TRANSIENT SIMULATED LAMINATES METHODOLOGY (TSL) Takeshi Takatoya, Kimo Chung, Yi-Jui Wu, and James C. Seferis
1136 AN EXAMINATION OF HEAT CONDUCTION EFFECT IN INFRARED STRESS MEASUREMENT OF CFRP LAMINATES Sunao Sugimoto and Takashi Ishikawa
1137 MATHEMATICAL STUDY OF LAPLACE AND YOUNG EQUATIONS IN THE CASE OF THE CONTACT BETWEEN A DROP AND FIBRE T. Hamieh and A. Brillard
1139 MICROMECHANICAL ANALYSIS OF FIBER-REINFORCED CONCRETE S. Maria , E. Sacco
1140 OXIDE FIBRES PRODUCED BY INTERNAL CRYSTALLIZATION METHOD AND THEIR USAGE IN COMPOSITE TECHNOLOGY Sergei T. Mileiko
1141 A STUDY OF THE FIBRE/MATRIX INTERACE IN AN OXIDE-FIBRE/NICKEL-ALUMINIDE-MATRIX COMPOSITES Vjacheslav P. Buntushkin, Igor V. Romanovich, Natalie S. Sarkissyan and Mikhail Yu. Starostin
1142 ICM-OXIDE-FIBRE/NI3AL-BASED-MATRIX COMPOSITES: FABRICATION, MICROSTRUCTURE AND SOME MECHANICAL PROPERTIES Sergei T. Mileiko, Sergei E. Salibekov, Nicholas V. Petrushin, Andrew A. Kolchin, Valerie P. Korzhov, Vjacheslav M. Kiiko, and Anatol A. Khvostunkov
1143 COATING ICM-OXIDE FIBRES IN A BUNDLE BY METAL AND COMPOUND LAYERS Andrew A. Kolchin, Dmitry B. Skvortsov, Galina K. Strukova, and Vladimir N. Kurlov
1144 INDUSTRIALIZATION OF A CARBON COMPOSITE CONTROL ROD Japie Ludick, Trevor Raman
1147 CRACK TIP STRESS FIELDS AND FRACTURE TOUGHNESS IN ADHESIVE JOINTS Cheng Yan, Yiu-Wing Mai and Lin Ye
1148 STRAIN MEASUREMENT OF COMPOSITE LAMINATES USING FIBER BRAGG GRATING SENSORS Chang-Sun Hong, Chi-Young Ryu, Chun-Gon Kim
1149 OPTIMIZE THE THICKNESS DISTRIBUTION IN THERMOFORMED POLYPROPYLENE/CACO3 COMPOSITES Shih-Jung Liu
1150 DESIGN OF A MULTI-FUNCTIONAL SEMITRAILER USING STRUCTURAL SANDWICH PANELS Hein Schellens and Ton Peijs ,
1151 ON THE VIBRATION OF COMPOSITE BAR IN PLAN MOTION M.Marin and D.Bolcu
1159 A GENERALISED CONTINUUM MODEL FOR TEXTILE C. Jung, J.F. Ganghoffer and B. Durand
1160 RESIDUAL STRESS DISTRIBUTION AND ITS INFLUENCE ON THE MECHANICAL BEHAVIOUR OF COMPOSITE LAMINATES GONG X.Lu, CHEROUAT A., GONG X.Jing and LU Jian
1163 CONTINUOUS MINERAL FIBRE - A REINFORCING ELEMENT FOR COMPOSITES V. Gorobinskay, I. Kravtchenko and L. Zabava
1169 DEVELOPMENT OF TECHNIQUES FOR THE JOINING OF COMPOSITE TUBES S.V. Hoa and S. Lee
1172 MESO-STRUCTURAL BEHAVIOUR OF COMPOSITE FABRIC FOR THE SIMULATION OF MANUFACTURING OF THIN COMPOSITE BY SHAPING PROCESS J.L. BILLOËT and A. CHEROUAT ,
1173 ELECTRICALLY CONDUCTIVE COMPOSITE : INFLUENCE OF POLYPYRROLE PARTICLES ON DYNAMIC MECHANICAL CHARACTERISTICS OF AN EPOXY MATRIX Philippe Olivier, Caroline Cassignol, Bruno Medda
1175 THERMOPLASTIC COMPOSITES BASED ON BIOPOLYMERS AND NATURAL FIBRES Garkhail, S. K. Meurs E., Van de Beld T. and Peijs T.,
1177 TITANIUM ALLOYS WITH TI3 (SI, GA)3 AND TI2GA STRENGTHENING N. V. Antonova. and L. A. Tretyachenko
1178 CRUSHING PERFORMANCE OF BRAIDED COMPOSITE RODS H.Saito, M.Sakaguchi, K.Kameo, H.Hamada, M.Iwamoto, A.Nakai, N.Takeda, T.Uozumi, and Y.Hisa
1181 PROCESSING OF CARBON FIBER REINFORCED TITANIUM MATRIX COMPOSITES C. Arvieu,, C. Even, B. Guillaume, J.L. Bobet, J.M. Quenisset, et P. Chadeyron
1184 IN-PLANE PROPERTIES OF CFRP LAMINATES CONTAINING THROUGH-THICKNESS REINFORCING RODS (Z-PINS) Craig A. Steeves and Norman A. Fleck
1185 PROBABILISTIC CERAMIC MATRIX COMPOSITE BEHAVIOR Pappu L.N. Murthy and Subodh K. Mital
1191 SURFACE MODIFICATION OF ORGANIC COMPOSITE AFTER LASER ABLATION J.F. Silvain, Christophe Even, Hiroyuki Niino, Akira Yabe
1192 COPPER ELECTROLESS DEPOSITION ON NITI SHAPE MEMORY ALLOY : AN XPS STUDY OF SN-PD-CU GROWTH J.F. Silvain, S. Trombert, J. Chazelas, M. Lahaye, Olivier Fouassier
1193 FATIGUE LIFE BEHAVIOUR OF SNPBAG/NITI COMPOSITE S. Trombert, J. Chazelas, M. Lahaye, Olivier Fouassier, J.F. Silvain
1194 INFLUENCE OF TEMPERATURE ON THE DURABILITY OF POLYMER COMPOSITE SYSTEMS Céline A. Mahieux and Kenneth L. Reifsnider
1196 DEVELOPMENT OF AN ADHESIVE JOINT DESIGN AND ANALYSIS TOOL D.M. Gleich and M.J.L. van Tooren
1199 OCCUPATIONAL HEALTH ASPECTS AND REGULATIONS ON AIRBORNE FIBROUS AND NON-FIBROUS DUST Christensson B, Krantz S and Andersson C-H
1201 GLASS FIBER-REINFORCED PLASTIC POLES FOR TRANSMISSION AND DISTRIBUTION LINES: AN EXPERIMENTAL INVESTIGATION D. Polyzois, S. Ibrahim, V. Burachynsky, and S. K. Hassan
1203 CRYSTAL FORMS AND MELTING BEHAVIOR IN COLD-CRYSTALLIZED VS. MELT-CRYSTALLIZED SYNDIOTACTIC POLYSTYRENE Ya Sen Sun and E. M. Woo
1205 THERMAL DEFORMATIONS OF CARBON/EPOXY LAMINATES FOR TEMPERATURE VARIATION K. Joon Yoon and Ju-Sik Kim
1206 ANALYSIS OF THE ENDOTHERMIC BEHAVIOR IN THE CURING PROCESS OF RESOLE Jiao Bin and Cai Qing
1207 COMPOSITIONAL CONTROLLABILITY OF THIN FILM METAL-ORGANIC MATRIX COMPOSITE MATERIALS SYNTHESIZED BY VARIABLE DUTY CYCLE PULSED PLASMA POLYMERIZATIONS Yuliang J. Wu, Licheng M. Han, Haibo Qiu, and Richard B. Timmons
1210 DAMAGE DEVELOPMENT DURING THERMAL CYCLING OF METAL AND GLASS MATRIX COMPOSITES A. R. Boccaccini, K. K. Chawla
1212 RECENT DEVELOPMENTS IN HOT COMPACTED FIBRE COMPOSITES I. M. Ward, P.J. Hine and B. Brew
1213 MODELLING LAMINATE RECYCLED POLYMERIC MATRIX COMPOSITES Antonio F. Ávila
1214 A COMPARATIVE STUDY OF MOISTURE ABSORPTION AND DESORPTION OF COMPOSITE MATERIALS Shi Yong, Su Yutang, He Feng and Zhang Lichen
1215 DETECTION OF TRANSVERSE CRACKS IN COMPOSITE LAMINATES BY EMBEDDED PLASTIC OPTICAL FIBERS Nobuo Takeda, Tatsuro Kosaka and Takayuki Ichiyama
1216 INFLUENCE OF BINDERS IN THE LIQUID COMPOSITE MOULDING PROCESS ON THE FATIGUE PROPERTIES OF COMPOSITE STRUCTURES Tobias Geiger, Christoph W. Kensche
1218 INFLUENCE OF THE THERMAL DEPENDENT MATRIX PROPERTIES ON THE RESIDUAL STRESS DISTRIBUTION IN A MODEL COMPOSITE A. Klisch, B. Fiedler and K. Schulte
1219 PERFORMANCE OF CONCRETE SYSTEMS REPAIRED USING FIBER REINFORCED PLASTICS Oral Buyukozturk, Brian Hearing, and Oguz Gunes
1224 COMPOSITE MATERIAL PROCESSING IN A SINGLE MODE CAVITY WITH VARIABLE FREQUENCY MICROWAVES Yunchang Qiu and Martin C. Hawley
1225 FAILURE MODES IN COMPOSITE JOINTS A FINITE ELEMENT STUDY Efstathios E. Theotokoglou
1226 STRUCTURE TRANSFORMATIONS AND INCREASING OF MECHANICAL PROPERTIES OF COMPOSITES S.N.Kulkov
1228 EXPERIMENTAL CHARACTERIZATION AND STOCHASTIC MODELING OF INTERLAMINAR SHEAR STRENGTHS OF GRAPHITE/EPOXY LAMINATED COMPOSITES Chao Zhang, R. Ganesan and Suong V. Hoa
1230 HIGH FREQUENCY DIELECTRIC MEASUREMENTS AND DESTRUCTIVE TESTING FOR THE INVESTIGATION OF WATER UPTAKE IN ADHESIVELY BONDED JOINTS Gordon S. Armstrong, Richard A. Pethrick, William M. Banks and Robert L. Crane
1231 FGMS INTERLAYERS IN DIFFUSION BONDING JOINTS Marek Barlak, Jaroslaw Grzes, Katarzyna Pietrzak
1232 MICROHARDNESS OF A PE / PE - COMPOSITE AND POLYETHYLENE GRADIENT MATERIAL A. Poeppel, K. Schulte
1234 STUDY OF VIBRATION MODAL ESTIMATION FOR COMPOSITE BEAM WITH PZT THIN FILM SENSOR SYSTEM Nobuo Oshima, Takehito Fukuda and Shinya Motogi
1238 CURING OF THICK ANGLE-BEND THERMOSET COMPOSITE PART: CURING PROCESS MODIFICATION FOR UNIFORM THICKNESS AND UNIFORM FIBER VOLUME FRACTION DISTRIBUTION Malak I. Naji and Suong V. Hoa
1240 DESCRIPTION OF FATIGUE FAILURE PROCESS FOR LAMINATED COMPOSITES STRUCTURES A. Muc
1242 NONLINEAR PROGRESSIVE DELAMINATION OF COMPOSITE PLATES UNDER CYCLIC LOADINGS A. Muc
1244 FUZZY CONTROL OF VIBRATION OF A SMART CFRP LAMINATED BEAM Takeshi Takawa, Takehito Fukuda, Koichiro Nakashima
1245 NUMERICAL SIMULATION OF THE NON LINEAR BEHAVIOUR OF REINFORCED CONCRETE STRUCTURES S. HASSANI-MANAI, R.CABRILLAC
1246 EFFECT OF THERMAL AGEING ON THE BEHAVIOUR OF GLASS POLYETHYLENE COMPOSITE : EXPERIMENTS AND MODELLING L. Meylheuc, Y. Remond and Ch. Wagner
1250 DESIGN AND COMPUTER MODELLING OF SMART COMPOSITE MATERIALS OF THE TYPE LAMINATED METAL-CERAMIC COMPOSITES WITH NEURAL NETWORK ADAPTIVE CONTROL OF ELASTIC WAVES TRANSFORMATIONS V. D. Koshur
1251 PROCESSING AND MECHANICAL PROPERTIES OF A PLASTICISED PVC REINFORCED WITH CELLULOSE WHISKERS Chazeau L., Cavaillé J.Y.,
1252 PROCESSING AND CHARACTERIZATION OF NEW THERMOSET NANOCOMPOSITES REINFORCED BY CELLULOSE WHISKERS M. Matos, J.Y. Cavaillé A. Dufresne and J.F. Gerard
1253 SILICA FILLED PA6: A STUDY ON THE REINFORCING ROLE PLAYED BY NANOPARTICLES E. Reynaud, J.Y. Cavaillé, C. Gauthier, G. Vigier, and J. Varlet
1255 ULTIMATE SHEAR OF BEAMS STRENGTHENED WITH CFRP SHEETS U. Ianniruberto and M. Imbimbo
1256 INTERLAYERS IN LAMINATES :MODELLING AND INFLUENCE ON THE FREE-EDGE FFECTS M. Haboussi, , H. Dumontet, J. L. Billoet
1259 AB INITIO INVESTIGATION OF CARBON FIBRE REINFORCED PLASTICS APPLYING PHENOLIC RESINS Bernhard Wielage, Akindele G. Odeshi and Herbert Mucha
1260 DEVELOPMENT OF MULTI-FUNCTIONAL SENSOR FOR RESIN TRANSFER MOLDING S. Motogi, T. Itoh, T. Fukuda, K. Yamagishi, S. Kitade and H. Morita
1261 CORROSION PROTECTION OF MMCS BY DIAMOND-LIKE CARBON COATINGS B. Wielage, A. Dorner
1262 ON MULTIPLE DELAMINATION BUCKLING OF COMPOSITE STRUCTURES Shapour Moradi and Farid Taheri
1263 DEVELOPMENT OF MAGNESIUM-MATRIX COMPOSITES FOR POWER TRAIN APPLICATIONS Karl Ulrich Kainer
1264 INFLUENCING FACTORS ON THE PROPERTIES OF NATURAL FIBER REINFORCED THERMOPLASTICS PROCESSED BY INJECTION MOULDING B. Wielage, G. Mennig, T. Aurich, Th. Lampke and A.Odeshi
1267 TENSILE AND IMPACT PROPERTIES OF BANANA FIBRE/GLASS FIBRE HYBRID POLYESTER COMPOSITES Laly A. Pothan, Sabu Thomas and Jayamol George
1269 IMPROVEMENT OF CAST IRON SURFACE BY USING ALLOY POWDERS ON THE MOLD Yoshisada Michiura, Kimio Nakamura, Masayoshi Kitagawa, Shigenori Tanabe, Yasuo Horikawa and Kenji Higashi
1270 JOINING MMCS TO METALS Katarzyna Pietrzak
1277 FABRICATION OF POLYCRYSTALLINE YAG/ALUMINA COMPOSITE FIBERS AND YAG FIBER Atsuya TOWATA, Hae Jin HWANG, Masaki YASUOKA, Mutsuo SANDO and Koichi NIIHARA
1279 MICROMECHANICAL AND MICROSPCOPIC EFFECTS OF PREPROCESSING ON INTERFACIAL SHEAR STRESS OF GLASS FIBER-CYANATE ESTER RESINS COMPOSITE P.Bartolomeo, J.F.Chailan, J.L. Vernet
1281 INTERFACE PROPERTIES BETWEEN A STEEL PRE-STRESSING STRAND AND AN EPOXY MATRIX. J. Van Vooren, B. Van Vooren, D. Van Hemelrijck
1282 DUST EMISSION AND STRENGTH LOSSES DUE TO HANDLING OF REINFORCEMENT FIBRES C.-H. Andersson, B. Christensson T. Dartman, and S. Krantz
1283 STRENGTH, CRACK INITIATION AND CRACK PROPAGATION IN FABRIC BASED FLEXIBLE AND SEMIFLEXIBLE COMPOSITES C-H Andersson, T Dartman, G Langstedt K Eng and J Asplund
1284 DELAMINATION IN MODE I AND II OF CARBON FIBRE COMPOSITE MATERIALS : FIBRE ORIENTATION INFLUENCE F. LACHAUD, R. PIQUET and L. MICHEL
1285 CHARACTERIZATION OF PHENOLIC RESINS FOR COMPOSITE HONEYCOMB APPLICATIONS J. E. Shafizadeh and J. C. Seferis
1286 INFLUENCE OF ELECTRON RADIATION AND WATER ABSORPTION ON IMPACT AND CAI FRACTURE BEHAVIOR OF CARBON/EPOXY COMPOSITE Kenjiro Komai, Kohji Minoshima, Kazuto Tanaka and Kohji Nakaike
1290 ANALYSIS OF SINGLE LAP ADHESIVE COMPOSITE JOINTS WITH DELAMINATED ADHERENDS Minghao Qin and Yuris A. Dzenis
1292 MECHANICAL BEHAVIOR OF HIGH STRENGTH UNIDIRECTIONAL COMPOSITES UNDER 3-D STATE OF STRESS Peter A. Zinoviev, Sergey V. Tsvetkov, Gennadii G. Kulish, Robert W. van den Berg and Van Schepdael Ludo J.M.M.
1296 LONG TERM DURABILITY TESTING OF POLYMER COMPOSITE MATERIALS C. Arendt, M. Brunner, J. Wang and T. Cebeci
1301 SINGULARITY-FREE COMPOSITES T. C. T. Ting
1302 BENDING VIBRATIONS OF ROTATING NON-UNIFORM COMPOSITE Sen Yung Lee and Jin Tang Yang
1303 ADVANCES IN COMPOSITES RESEARCH FOR MARINE STRUCTURES Yapa D. S. Rajapakse
1304 COMPOSITES IN THE SEA: SORPTION, STRENGTH AND FATIGUE Y. J. Weitsman
1305 EFFECTS OF SALT WATER AGING ON THE POST-IMPACT BEHAVIOR OF POLYMERIC COMPOSITES David R. Veazie, S.W. Park, and Min Zhou
1306 PROPERTIES OF CORE MATERIALS FOR SANDWICH STRUCTURES R. M. Christensen and B. Kim
1307 STRESS BASED YIELD/FAILURE CRITERIA FOR FIBER COMPOSITES R. M. Christensen
1308 TESTING AND ANALYSIS OF COMPOSITE SANDWICH BEAMS I. M. Daniel, J. L. Abot, and K. A. Wang
1309 FAILURE UNDER MULTIAXIAL STRESSES OF COMPONENT MATERIALS FOR FIBER COMPOSITE SANDWICH CONSTRUCTION S. J. DeTeresa, D. C. Freeman, S. E. Groves, and R. E. Sanchez
1312 COMPACTION OF THICK COMPOSITES: SIMULATION AND EXPERIMENT Daniel D. Shin, Evan A. Kempner, and H. Thomas Hahn
1313 SANDWICH BEAMS WITH MID-PLANE ASYMMETRY SUBJECTED TO LATERAL LOADS ANALYSIS AND OPTIMIZATION Nihar R. Satapathy and Dr. Jack R. Vinson
1314 FOUNDATION MODEL OF TSD SPECIMEN Xiaoming Li and Leif A. Carlsson
1316 DYNAMIC INTERLAMINAR FRACTURE TOUGHNESS IN POLYMERIC COMPOSITES C. T. Sun and J.L. Tsai
1317 SUBSONIC AND INTERSONIC DYNAMIC CRACK GROWTH IN UNIDIRECTIONAL COMPOSITES Demirkan Coker, Ares J. Rosakis and Yonggang Y. Huang
1321 FAILURE MODE TRANSITION IN FIBER REINFORCED COMPOSITES UNDER DYNAMIC MULTIAXIAL COMPRESSION Kenji Oguni and G. Ravichandran
1322 EFFECTS OF STRAIN RATE AND FIBER WAVINESS ON THE COMPRESSIVE BEHAVIOR OF COMPOSITE LAMINATES I. M. Daniel and H. M. Hsiao
1323 TWO-PARAMETER CHARACTERIZATION OF CRACK TIP FIELDS IN AN ANISOTROPIC PLATE UNDER BENDING F. Liang and F. G. Yuan
1325 IMPORTANCE OF FIBER/MATRIX BONDING IN SIC/BN/SIC ON MECHANICAL AND INTERFACIAL PROPERTIES F. Rebillat, J. Lamon and A. Guette
1329 DETERMINATION OF ELASTIC PROPERTIES BY AN ULTRASONIC TECHNIQUE S. Baste
1330 ADVANCED COMPOSITES FOR SMART STRUCTURES Georges Akhras
1332 EFFECT OF THE SKIN-CORE INTERPHASE PROPERTIES ON THE TENSILE STRESS DISTRIBUTION FIELD OF AN AL-GFRP SANDWICH BEAM G.C. PAPANICOLAOU and D.BAKOS
1335 AL-SIC IMPROVES RELIABILITY OF IGBT POWER MODULES G. Lefranc, H.P. Degischer, K.H. Sommer and G. Mitic
1336 MULTIAXIAL COMPOUND WEAVE METHOD FOR PREFORMS Angela Durie, Ross Griffith, Alan Tomlinson
1342 MECHANICAL IDENTIFICATION OF ANISOTROPIC PROPERTIES OF COMPOSITES Michel Grédiac, Fabrice Pierron, Yves Surrel and Alain Vautrin
1343 THE MICROMECHANICAL MODELLING OF THE SHORT CRACK FATIGUE BEHAVIOUR OF AL-SIC MMCS Mark Bruzzi and Dr. P. E. McHugh
1344 PROCESSING AND PROPERTIES OF FULLERENE (C-60) DERIVED CARBON/CARBON COMPOSITES Chen-Chi M. Ma, Shang Chin Sung, Long Y. Chiang, and Lee Y. Wang
1345 MEASUREMENT OF BENDING IN SPECIMENS OF CERAMIC-MATRIX COMPOSITES UNIAXIALLY LOADED IN TENSION-COMPRESSION P. Reynaud, C. Tallaron, A. Cosculluela, C. Cambas, P. Gomez, J.L. Delamaide, M. Bourgeon
1346 PLY WAVINESS ON IN-PLANE STIFFNESS OF COMPOSITE LAMINATES Cimini Jr., Carlos A., and Tsai, Stephen W.
1347 STRESS-RUPTURE, OVERSTRESSING AND A PROPOSED NEW METHODOLOGY TO ASSESS THE DURABILITY AND RELIABILITY OF CERAMIC MATRIX COMPOSITES AT ELEVATED TEMPERATURES Edgar Lara-Curzio
1348 ADVANCED CEMENT-BASED COMPOSITES Surendra P. Shah
1349 STRESS-STRAIN STATE INVESTIGATION OF ADHESIVE LAYER IN SANDWICH STRUCTURE OF FLYING VEHICLE Huang Song-Jeng, Dr. Kobelev V.N., and Dr. Kobelev V.V.
1351 THERMOMECHANICAL BEHAVIOUR OF 2D-SIC/SIC COMPOSITES WITH NANOSCALE-MULTILAYERED (PYC/SIC)N INTERPHASES S. Bertrand, F. Germain, R. Pailler and J. Lamon
1352 PROBABILISTIC THERMOELASTIC EFFECTIVE CHARACTERISTICS FOR COMPOSITES WITH INTERFACE DEFECTS Marcin Kaminski
1353 PREPARATION OF GF/PVC COMPOSITES USING AQUEOUS SUSPENSION IMPREGNATION TECHNIQUE: THE INTERFACIAL ISSUES Jiarui XU, Changhai YI, Xiao WANG and Hanmin ZENG
1354 COMPOSITE MATERIALS FOR THE REPAIR OF CONCRETE BEAM S.Lee, R.S.W.Lee and P. Tong
1356 PREDICTION AND EVALUATION OF LOCAL AND GLOBAL OPTIMA IN STRENGTH DESIGN OF COMPOSITE LAMINATES Philippe M. Manne and Torben K. Henriksen
1357 DRILLING OF MULTI-LAYER PRINTED WIRING BOARD OF AFRP USING CO2 LASER Hisahiro Inoue, Toshiki Hirogaki, Eiich Aoyama, Tsutao Katayama and Keij Ogawa
1358 OPTIMIZATION OF THE PERFORMANCE OF GRADIENT COMPOSITE ARMOR Frank K. Ko and Jun Chang
1359 FIBER (YARN)-MATRIX INTERFACIAL STRESS ANALYSIS BY USING THE HETEROGENEOUS ELEMENT METHOD Youqi Wang and Chen Tao
1360 FAILURE AT INTERFACES IN COMPOSITE MATERIAL SYSTEMS DUE TO THERMAL EXPANSION MISMATCH E. S. Folias , M. Hohn
1361 THE MECHANICAL BEHAVIOR OF CERAMIC/METAL LAMINATE UNDER THERMAL SHOCK Dov Sherman and Doron Schlumm
1362 ULTRALIGHT FRP PSEUDOSPHERICAL SHELL G.L.Narasimham and R.Ramesh Kumar
1363 MODE II AND MIXED MODE I/II DELAMINATION OF GRAPHITE/EPOXY COMPOSITE UNDER DYNAMIC LOADING CONDITIONS Sylvanus N. Nwosu, David Hui, and Gregory Czarnecki
1364 CREEP, STRESS RUPTURE, AND BEHAVIOR OF A DUCTILE HYBRID FIBER REINFORCED POLYMER (D-H-FRP FOR CONCRETE STRUCTURES Francis P. Hampton, Frank K.Ko, and Harry G. Harris
1365 ON A ROLE OF FIBRE-MATRIX INTERFACES IN THE CONTEXT OF NEAR-SURFACE STABILITY ANALYSIS OF COMPOSITE MATERIALS Yuri N. Lapusta and Werner Wagner
1366 INTERFACIAL STRUCTURE AND MECHANICAL PROPERTIES OF MGLIAL/SICW COMPOSITES Zhang Di, Ma Chunjiang , Qin Jining , Zhang Xiaonong , H.Mori and T.Sakata
1367 TRANSIENT WAVES IN A LAMINATED COMPOSITE PLATE TO A POINT EXCITATION G. R. Liu, and K. Y. Lam
1401 DRIVING FORCES FOR COST-EFFECTIVE COMPOSITES: NEW DEMANDS ON MATERIALS AND PROCESSES J.-A. E. Månson, M.D. Wakeman, P.-E. Bourban, P.W. Sunderland
1402 RECENT PROGRESS IN EXPERIMENTAL AND COMPUTATIONAL MECHANICS APPROACH TO PERFORMANCE ASSESSMENT OF COMPOSITE MATERIALS STRUCTURES Isao Kimpar
1403 THE THERMO STRUCTURAL COMPOSITE NICHE : A GLOBAL APPROACH DRIVING PROGRESS AND SUCCESS. Pierre Bétin, Directeur général adjoint, chargé de la Stratégie Technologique



[ HOME ]